Effect of Austenite Transition under Pulsating Magnetism

2013 ◽  
Vol 634-638 ◽  
pp. 1704-1707
Author(s):  
Shen Bai Zheng ◽  
Shao Hui Pan ◽  
Hui Wen ◽  
Xiaog Xiong Wang
Keyword(s):  
Magnetic Field ◽  
Carbon Steel ◽  
Cold Rolling ◽  
Grain Growth ◽  
Magnetic Field Intensity ◽  
Raw Materials ◽  
Low Carbon Steel ◽  
Intermediate Frequency ◽  
Low Carbon ◽  
The Magnetic Field

The austenite steel was radiated by the intermediate frequency pulsating magnetism, and the effects that pulsating magnetic on the austenite transition was studied. The result shows that the pulsating magnetism promotes the austenitic grain growth of low carbon steel. If the magnetic field intensity is increased, it could provide better performance of raw materials to cold rolling processing.

Microstructure and Properties under Alternating Magnetism after Hot Rolling

2014 ◽  
Vol 1004-1005 ◽  
pp. 1256-1259
Author(s):  
Shen Bai Zheng ◽  
Shi Jie Liu ◽  
Hong Bin Li ◽  
Bin Feng ◽  
Xue Song Hui
Keyword(s):  
Magnetic Field ◽  
Carbon Steel ◽  
Cold Rolling ◽  
Grain Growth ◽  
Hot Rolling ◽  
Magnetic Field Intensity ◽  
Raw Materials ◽  
Low Carbon Steel ◽  
Low Carbon ◽  
The Magnetic Field

The austenite steel after rolling was radiated by the alternating magnetism, and the effects that alternating magnetic on the austenite transition was studied. The result shows that the alternating magnetism promotes the austenitic grain growth of low carbon steel. If the magnetic field intensity is increased, it could provide better performance of raw materials to cold rolling processing.

Effect of Uniaxial Stress on Magnetic Permeability and Magnetic Loss of Low-Carbon Steel in Weak Alternating Magnetic Field

2014 ◽  
Vol 678 ◽  
pp. 220-227
Author(s):  
Xiao Yang Li ◽  
Zan Dong Han
Keyword(s):  
Magnetic Field ◽  
Carbon Steel ◽  
Uniaxial Tension ◽  
Magnetic Permeability ◽  
Magnetic Loss ◽  
Low Carbon Steel ◽  
Low Carbon ◽  
Stress Increase ◽  
Magnetic Parameters ◽  
Pressure Stress

The inverse magnetostrictive effect provides a chance to detect the stress by measuring some magnetic parameters. So it is important to learn the effect of stress on some magnetic parameters. A measuring system to measure magnetic permeability and magnetic loss and a device to load uniaxial tension and pressure stress were developed. The result shows that magnetic permeability and magnetic loss increase with uniaxial tension stress increase and decreases with uniaxial pressure stress increase. It is also concluded that the relative change of magnetic permeability and magnetic loss decrease with increase of the included angle between the directions of the stress and magnetic field. These results suggest that magnetic permeability and magnetic loss can be further used to evaluate the stress in low-carbon steel.

Modeling austenite–ferrite transformation in low carbon steel using the cellular automaton method

2004 ◽  
Vol 19 (10) ◽  
pp. 2877-2886 ◽  
Author(s):  
Y.J. Lan ◽  
D.Z. Li ◽  
Y.Y. Li
Keyword(s):  
Carbon Steel ◽  
Cellular Automaton ◽  
Grain Boundaries ◽  
Grain Growth ◽  
Low Carbon Steel ◽  
Carbon Diffusion ◽  
Cellular Automaton Model ◽  
Low Carbon ◽  
Austenite Grain ◽  
Ferrite Transformation

Austenite–ferrite transformation at different isothermal temperatures in low carbon steel was investigated by a two-dimensional cellular automaton approach, which provides a simple solution for the difficult moving boundary problem that governs the ferrite grain growth. In this paper, a classical model for ferrite nucleation at austenite grain boundaries is adopted, and the kinetics of ferrite grain growth is numerically resolved by coupling carbon diffusion process in austenite and austenite–ferrite (γ–α) interface dynamics. The simulated morphology of ferrite grains shows that the γ–α interface is stable. In this cellular automaton model, the γ–α interface mobility and carbon diffusion rate at austenite grain boundaries are assumed to be higher than those in austenite grain interiors. This has influence on the morphology of ferrite grains. Finally, the modeled ferrite transformation kinetics at different isothermal temperatures is compared with the experiments in the literature and the grid size effects of simulated results are investigated by changing the cell length of cellular automaton model in a set of calculations.

Reverse Austenite Transformation and Grain Growth in a Low-Carbon Steel

2016 ◽  
Vol 48 (2) ◽  
pp. 796-808 ◽  
Author(s):  
Thomas Garcin ◽  
Keiji Ueda ◽  
Matthias Militzer
Keyword(s):  
Carbon Steel ◽  
Grain Growth ◽  
Low Carbon Steel ◽  
Low Carbon ◽  
Austenite Transformation
Sign in / Sign up

Export Citation Format

Share Document