Experimental Modal and Vibration Analysis of High-Speed Industrial Sewing Machine

2013 ◽  
Vol 711 ◽  
pp. 363-366
Author(s):  
Li Zhang ◽  
Hong Wu
Keyword(s):  
Modal Analysis ◽  
Vibration Analysis ◽  
High Speed ◽  
Experimental Modal Analysis ◽  
Vibration Exciter ◽  
Operating Speed ◽  
Sewing Machine

With the vibration exciter, the experimental modal analysis and vibration analysis of high-speed industrial sewing machine was carried out in this paper. The results show that the sewing machine will be of resonance at the operating speed of 4000r/min, which means the structure of the chassis of the sewing machine should be optimized.

The Use of Modan 3D in Experimental Modal Analysis

2013 ◽  
Vol 486 ◽  
pp. 36-41 ◽  
Author(s):  
Róbert Huňady ◽  
František Trebuňa ◽  
Martin Hagara ◽  
Martin Schrötter
Keyword(s):  
Modal Analysis ◽  
Vibration Analysis ◽  
High Speed ◽  
Mechanical Vibration ◽  
Steel Sample ◽  
Experimental Modal Analysis ◽  
Image Correlation ◽  
Optical Methods ◽  
Mode Shapes ◽  
Vibration Modes

Experimental modal analysis is a relatively young part of dynamics, which deals with the vibration modes identification of machines or their parts. Its development has started since the beginning of the eighties, when the computers hardware equipment has improved and the fast Fourier transform (FFT) could be used for the results determination. Nowadays it provides an uncountable set of vibration analysis possibilities starting with conventional contact transducers of acceleration and ending with modern noncontact optical methods. In this contribution we mention the use of high-speed digital image correlation by experimental determination of mode shapes and modal frequencies. The aim of our work is to create a program application called Modan 3D enabling the performing of experimental modal analysis and operational modal analysis. In this paper the experimental modal analysis of a thin steel sample performed with Q-450 Dantec Dynamics is described. In Modan 3D the experiment data were processed and the vibration modes were determined. The reached results were verified by PULSE modulus specialized for mechanical vibration analysis.

Schwingungsanalyse an Industrierobotern*/Vibration analysis of industrial robots

2019 ◽  
Vol 109 (09) ◽  
pp. 656-661
Author(s):  
A. Karim ◽  
C. Michalkowski ◽  
A. Lechler ◽  
A. Verl
Keyword(s):  
Modal Analysis ◽  
Active Control ◽  
Normal Mode ◽  
Vibration Analysis ◽  
Industrial Robots ◽  
Vibration Exciter ◽  
Dynamic Vibration ◽  
Vibration Behavior ◽  
Working Space ◽  
Electromagnetic Vibration

Dieser Beitrag untersucht experimentell das dynamische Schwingverhalten eines „KR-500–3 MT“ von Kuka mittels eines elektromagnetischen Schwingerregers (Shaker) an insgesamt 28 Messposen im Arbeitsraum. Diese Untersuchungsmethode ist neuartig, da die Ergebnisse mit einer Modalanalyse mit Impulshammeranregung verglichen werden. Ab der vierten Eigenmode entstehen Unterschiede aufgrund der Anregungsform. Zudem wird an jeder Pose eine Messung mit angezogener Motorbremse und eine mit aktiver Regelung durchgeführt und miteinander verglichen.   This paper explores experimentally the dynamic vibration behavior of a Kuka KR-500 MT, using an electromagnetic vibration exciter (shaker) on a total of 28 measuring poses in the working space. As such studies are not known, the results are compared to a modal analysis with impulse hammer excitation. Starting from the fourth normal mode, differences arise due to the form of excitation. Both measurements are performed and compared with each other on each pose with brakes applied as well as with active control.

Application of Experimental Modal Analysis Method in Researching of Mechanical Structure Dynamic Characteristics

2013 ◽  
Vol 694-697 ◽  
pp. 370-373
Author(s):  
Zhang Yu ◽  
Wen Zheng Cai
Keyword(s):  
Modal Analysis ◽  
Natural Frequency ◽  
Dynamic Characteristics ◽  
High Speed ◽  
Experimental Modal Analysis ◽  
Analysis Method ◽  
Mechanical Structure ◽  
Vibration Resistance ◽  
Structural Rigidity ◽  
Structure Dynamic

With the purpose of realizing the analysis of mechanical structure dynamic characteristics and inhibit vibration and noise, combined with the analysis of a certain type of high speed sewing machines vibration characteristics, we carry on the concrete experimental modal analysis, and compare the results of the experimental modal analysis with the results of spectrum analysis. The analysis results show that the second order natural frequency of the shell is close to two octaves under the normal working speed of sewing machine and it will lead to resonance. Enhancing the structural rigidity and the natural frequency under this modal to avoid resonance frequency is the key to improve vibration resistance of the structure.

The Dynamic Research of Industrial Sewing Machines Based on the Modal and Operational Deformation Analysis

2013 ◽  
Vol 432 ◽  
pp. 269-274
Author(s):  
Ya Jun Li ◽  
Li Zhang ◽  
Yan Miao Ma ◽  
Bin Liu
Keyword(s):  
Noise Reduction ◽  
Modal Analysis ◽  
Dynamic Characteristic ◽  
Fundamental Frequency ◽  
Experimental Modal Analysis ◽  
Harmonic Vibration ◽  
Modal Parameters ◽  
Deformation Analysis ◽  
Sewing Machine ◽  
Harmonic Frequencies

The vibration of the operational sewing machine is caused mostly by the fundamental frequency of the motor and its harmonic frequencies. The experimental modal analysis was conducted on a certain industrial sewing machine to identify its modal parameters. The operational deformation analysis was carried out and the actual deformation in the first six harmonic frequencies of the main speed frequency was obtained. Finally, the dynamic characteristic was identified by analyzing how each mode influences the harmonic vibration. This paper provides a valuable reference for noise reduction of the sewing machine.

scholarly journals Vibration Analysis of the Drivetrain in Dependence on the Type of Gearbox Suspension Bushing

2021 ◽  
Vol 71 (1) ◽  
pp. 121-130
Author(s):  
Struz Jiri ◽  
Hruzik Lukas ◽  
Havlik Jiri
Keyword(s):  
Modal Analysis ◽  
Analytical Method ◽  
Vibration Analysis ◽  
Great Distance ◽  
Experimental Modal Analysis ◽  
Main Subject ◽  
Shaft Length ◽  
Heavy Truck ◽  
Different Parts ◽  
Fft Analysis

Abstract In the vast majority of technical applications, there is a necessity to transmit the torque from drive to driven machine together with the demand to overcome great distance between given devices. One of the solutions of this problem is the use of a cardan shaft. Operations of connecting shaft and drivetrain are accompanied by oscillations negatively influencing the driver comfort. Main subject of this article is the measurement of vibrations on different parts of a heavy truck and its evaluation by FFT analysis. Measurements are performed with two kinds of suspension bushing which are compared with to each other. Based on the previous measuring, influence of cardan shaft length was also investigated. First of all, dependency on the length of the cardan shaft on deflection angles for V arrangement was evaluated by analytical method. The theoretical introduction is followed by research of eigen frequency depending on the length of the cardan shaft. The results obtained by modal analysis in FEM are verified by experimental modal analysis [1].

High-Speed Camera based Experimental Modal Analysis for Dynamic Testing of an Automotive Coil Spring

2021 ◽  
Author(s):  
Felix Simeon Egner ◽  
Yonggang Wang ◽  
Thijs Willems ◽  
Matteo Kirchner ◽  
Bert Pluymers ◽  
...  
Keyword(s):  
Modal Analysis ◽  
High Speed ◽  
Dynamic Testing ◽  
Experimental Modal Analysis ◽  
High Speed Camera ◽  
Coil Spring

The Experimental Modal Analysis of High Speed Machining Tool System Based on Integral Polynomial Recognition Method

2012 ◽  
Vol 723 ◽  
pp. 159-163 ◽  
Author(s):  
Fei Xiao ◽  
Xian Li Liu ◽  
Yan Xin Wang ◽  
Li Jia Liu ◽  
Da Qu
Keyword(s):  
Modal Analysis ◽  
High Speed ◽  
Simulation Method ◽  
Experimental Modal Analysis ◽  
Modal Parameters ◽  
High Speed Machining ◽  
Analysis Method ◽  
Recognition Method ◽  
Element Simulation ◽  
Integral Polynomial

According to the principle of the experimental modal analysis, this study is based on tool system of the MIKRON UCP 710 numerical control machining center as test object for experimental modal analysis. Using the integral polynomial recognition method to identify the modal parameters (natural frequency, structural damping, and modal shape), and finally matching the results with the vector analysis method and the finite element simulation method. The results show that integral polynomial recognition method has higher precision than the vector analysis method to identify the multi-degree of freedom system; the experimental modal analysis can also obtain better modal parameters of the structure system, and a higher precision than the finite element simulation method. Obtained the MIKRON UCP 710 high-speed milling center tool system accurate modal parameters provides the necessary theoretical and experimental basis for the further study of the stability properties in the cutting processing of the high speed machining tool system.

Sign in / Sign up

Export Citation Format

Share Document