Evaluation of Potential of Remaining Oil after Polymer Flooding

2013 ◽  
Vol 734-737 ◽  
pp. 1189-1195
Author(s):  
Li Yan Sun ◽  
Hai Dong Shi ◽  
Hao Yang ◽  
Ji Cheng Zhang
Keyword(s):  
Oil Recovery ◽  
Injection Pressure ◽  
Injection Rate ◽  
Polymer Flooding ◽  
Oil Field ◽  
Basic Principles ◽  
Oil Distribution ◽  
Remaining Oil ◽  
Daqing Oil Field ◽  
Remaining Oil Distribution

Figuring out the rule of remaining oil distribution after polymer flooding is the basis for continuing study on development policy after polymer flooding in Daqing Oil Field. Based on the basic principles of percolation mechanics, percolation mechanics of polymer flooding reservoirs under fixed injection pressure and injection rate was studied, the mechanism of remaining oil changes after polymer flooding was investigated; According to the numerical simulation results, the rule of remaining oil distribution in Daqing oilfield has been given out. This will be theoretical and practical guidance for enhancing oil recovery after polymer flooding.

Reasonable Injection Parameters for the Polymer Flooding Research in the Putaohua I1~2 Oil Layer of Xing IV Area

2014 ◽  
Vol 535 ◽  
pp. 705-708
Author(s):  
Li Jun Wang ◽  
Lin Qiang Li
Keyword(s):  
Oil Recovery ◽  
Theoretical Basis ◽  
Economic Benefit ◽  
Injection Rate ◽  
Polymer Flooding ◽  
Oil Field ◽  
Polymer Molecular Weight ◽  
Weight Concentration ◽  
Injection Parameters ◽  
Daqing Oil Field

In order to increase the oil production and ultimate recovery of Xingbei area of Daqing oil field, according to the geologic conditions of Xingbei region .The reasonable injection parameters of polymer flooding were discussed considering geologic information , experiments in lab, economic benefit . The study consists of analyzing the law governing of the remaining oil in Xingbei. By applying the methods of the combination of geological modeling and simulation for analyzing different polymer molecular weight, concentration, dosage and injection rate. concludes the influence of different injection parameters to ultimate oil recovery, This paper provides a theoretical basis and experimental support for apricot north polymer flooding of Xingbei area of Daqing oilfield .

The Remaining Oil Distribution and Main Controlling Factor Analysis of Inefficient Reserves in Complex Fault Block

2014 ◽  
Vol 915-916 ◽  
pp. 1128-1131
Author(s):  
Yu Sheng Ding ◽  
Shuang Yan Chen ◽  
Jun Xie ◽  
Ju Biao Zhou ◽  
Li Yao Li
Keyword(s):  
Development Process ◽  
Oil Field ◽  
Water Flooding ◽  
Field Development ◽  
Fault Block ◽  
Oil Distribution ◽  
Complex Fault ◽  
Distribution Rule ◽  
Remaining Oil ◽  
Remaining Oil Distribution

Inefficient reserves in fault block belongs to low permeability thin interbed, thus water flooding development process has exposed many contradictions which are serious heterogeneity, large difference of suction of interlayer. Entering the water injection development, the injected water which rapidly advance along the high permeability channel causes water channeling and water flooding, which intenses development contradictions between layers. The reservoir numerical simulation technology on computer can reappear the movement of water and gas in the underground reservoir development process and describes the underground remaining oil distribution of inefficient reserves in complex fault block, which summarizes the remaining oil distribution rule of the water flooding development for complex fault block of inefficient reserves and provides basis for the establishment of oil field development adjustment scheme.

The Study of Remaining Oil Distribution in Tazhong 4 Oilfield’s TZ402CIII Oil Group

2014 ◽  
Vol 941-944 ◽  
pp. 2553-2557
Author(s):  
Yi Kun Liu ◽  
Zhen Wang ◽  
Hui Min Tang ◽  
Jin Ming Wang ◽  
Wen Hui Zhao ◽  
...  
Keyword(s):  
Physical Property ◽  
Underground Water ◽  
Oil Field ◽  
Secondary Development ◽  
Neutron Lifetime ◽  
Sweep Efficiency ◽  
Oil Distribution ◽  
Remaining Oil ◽  
Depth Study ◽  
Remaining Oil Distribution

With the deepening exploitation percent, underground water relations have become more complex and tap the oil field at stable yields is more and more difficult, thus make us develop in depth study about the remaining oil distribution become critical. The proved geological reserve is high and physical property is better in 402 block’s group CIII of Tazhong 4 Oilfield. Combined with current mining situation in TZ402CIII oil group and in order to proven the distribution of the remaining oil, we used common reservoir engineering methods, neutron lifetime logging data analysis over the years and sweep efficiency analysis from sealed coring wells to study in-depth current remaining oil distribution range in TZ402CIII oil group, which provide an important basis to further improve development effect, dig remaining oil, as well as secondary development and adjust tap the potential in TZ402CIII oil group.

scholarly journals Optimization Design of Injection Strategy for Surfactant-Polymer Flooding Process in Heterogeneous Reservoir under Low Oil Prices

Energies ◽  
2019 ◽  
Vol 12 (19) ◽  
pp. 3789 ◽  
Author(s):  
He ◽  
Chen ◽  
Yu ◽  
Wen ◽  
Liu
Keyword(s):  
Oil Recovery ◽  
Oil Prices ◽  
Water Flooding ◽  
Fractional Flow ◽  
Simultaneous Injection ◽  
Oil Distribution ◽  
Remaining Oil ◽  
Remaining Oil Distribution ◽  
Incremental Oil Recovery ◽  
Injection Strategies

Surfactant–polymer (SP) flooding has significant potential to enhance oil recovery after water flooding in mature reservoirs. However, the economic benefit of the SP flooding process is unsatisfactory under low oil prices. Thus, it is necessary to reduce the chemical costs and improve SP flooding efficiency to make SP flooding more profitable. Our goal was to maximize the incremental oil recovery of the SP flooding process after water flooding by using the equal chemical consumption cost to ensure the economic viability of the SP flooding process. Thus, a systematic study was carried out to investigate the SP flooding process under different injection strategies by conducting parallel sand pack flooding experiments to optimize the SP flooding design. Then, the comparison of the remaining oil distribution after water flooding and SP flooding under different injection strategies was studied. The results demonstrate that the EOR efficiency of the SP flooding process under the alternating injection of polymer and surfactant–polymer (PASP) is higher than that of conventional simultaneous injection of surfactant and polymer. Moreover, as the alternating cycle increases, the incremental oil recovery increases. Based on the analysis of fractional flow, incremental oil recovery, and remaining oil distribution when compared with the conventional simultaneous injection of surfactant and polymer, the alternating injection of polymer and surfactant–polymer (PASP) showed better sweep efficiency improvement and recovered more remaining oil trapped in the low permeability zone. Thus, these findings could provide insights into designing the SP flooding process under low oil prices.

Microbial Diversity Analysis of Reservoirs after Polymer Flooding in Daqing Oil Field at the Earlier Stage of Microbial Profile Modification

2010 ◽  
Vol 113-116 ◽  
pp. 835-839
Author(s):  
Yong Hong Huang ◽  
Guo Ling Ren ◽  
Hong Mei Yuan ◽  
Li Wei ◽  
Xiao Lin Wu ◽  
...  
Keyword(s):  
Microbial Community ◽  
Oil Recovery ◽  
Polymer Flooding ◽  
Oil Field ◽  
Gene Clone ◽  
16S Rdna Gene ◽  
Uncultured Bacterium ◽  
Profile Modification ◽  
Microbial Profile ◽  
Daqing Oil Field

To gain a better understanding of the mechanism and technology of microbial enhanced oil recovery, microbial community structure and diversity of reservoirs after polymer flooding in Daqing oil field at the Earlier Stage of microbial profile modification were studied. 16S rDNA gene clone library was used to assess the structure and diversity of microbial community. The results showed that the dominant microbes of the earlier stage of microbial profile modification are uncultured bacterium, comprising 88.6% of library clones. The cultured strains are composed of Epsilonproteobacteria(5.7%) , Gammaproteobacteria(4.7%) and Firmicutes (1%). Among the Epsilonproteobacteria, Sulfuricurvum accounts for 4.7% of the cultured strains of library clones and Arcobacter accounts for 1%. Besides, the dominant communities also include Pseudomonas and Moorella.

Study on Remaining Oil Distribution After Polymer Flooding

2010 ◽  
Author(s):  
Jiecheng Cheng ◽  
Jianguang Wei ◽  
Kaoping Song ◽  
Peihui Han
Keyword(s):  
Polymer Flooding ◽  
Oil Distribution ◽  
Remaining Oil ◽  
Remaining Oil Distribution
Sign in / Sign up

Export Citation Format

Share Document