Application of Hartmann Acoustic Generator in Source of Underwater Pyrotechnic Combustion

2013 ◽  
Vol 787 ◽  
pp. 638-643
Author(s):  
Jie Li ◽  
Hua Guan ◽  
Dong Ming Song ◽  
Qi Wang ◽  
Jun Du ◽  
...  
Keyword(s):  
Sound Pressure Level ◽  
Sound Pressure ◽  
Acoustic Radiation ◽  
Structural Parameters ◽  
Resonant Cavity ◽  
Experimental Studies ◽  
Combustion Products ◽  
Pressure Level ◽  
Radiation Characteristics ◽  
Acoustic Frequency

In order to investigate acoustic radiation characteristics of underwater pyrotechnic combustion, Hartmann acoustic generator was applied and its main structural parameters effecting acoustic radiation characteristics were studied by using underwater acoustic measurement system. Experimental studies have shown that, when Hartmann acoustic generator was applied, the sound pressure level of underwater pyrotechnic combustion increased significantly because of the strengthening of turbulence degree. The distance between the nozzle and the resonant cavity is an important factor of affecting acoustic radiation characteristics of Hartmann acoustic generator. When the resonant cavity was placed in the unstable pressure area, it could stimulate strong sound waves. On account of the resistance of the water, the combustion products speed of reaching resonant cavity drooped and the collision strength between the feedback combustion products and the newly generated products reduced. So when the distance was larger, the SPL(sound pressure level) was smaller. The SPL of underwater pyrotechnic combustion increased and the acoustic frequency moved to the low frequency with the depth of resonant cavity increased, which is consistent with the acoustic characteristics of Hartmann acoustic generator applied in air.

scholarly journals Effects of pipe casing structure on acoustic emission characteristics of underwater pyrotechnic combustion

2019 ◽  
Vol 39 (1) ◽  
pp. 149-157
Author(s):  
Jie Li ◽  
Jun Du ◽  
Xian Chen ◽  
Yanli Wang
Keyword(s):  
Sound Pressure Level ◽  
Sound Pressure ◽  
Acoustic Radiation ◽  
Structural Characteristics ◽  
Bubble Formation ◽  
Pressure Level ◽  
Radiation Characteristics ◽  
Acoustic Testing ◽  
Gas Volume ◽  
Broadband Sound

In order to investigate the acoustic radiation characteristics of underwater, a pipe casing was introduced and the effects of its main structural characteristics on underwater combustion acoustic radiation were studied by acoustic testing. The results show that the addition of the pipe casing significantly increased the sound pressure level of underwater pyrotechnic combustion, especially the peak of sound pressure level that was increased by 15.9 dB from 155.5 to 171.4 dB at the frequency of 125 and 100 Hz. But the addition of the pipe casing had little effect on the frequency. These results indicated that adding a pipe casing is effective for improving sound pressure level in underwater pyrotechnic combustion. An increase in nozzle diameter from 10 to 12.5 mm resulted in an increase of gas volume, so the peak of sound pressure level and broadband sound pressure level is higher. Changing the pipe casing direction to vertical downward will make the bubble formation period shorter, which will generate more bubbles and strong wake; the interaction between bubbles and wake results in a higher intensity of turbulence, which accounts for the coalescence and breakup of bubbles in the fluid. Besides, changing the diameter of pipe casing can be used to lower the frequency of underwater noise.

Interaction between Strong Sound Waves and Cloud Droplets: Theoretical Analysis

2021 ◽  
Author(s):  
Ying-Hui Jia ◽  
Fang-Fang Li ◽  
Kun Fang ◽  
Guang-Qian Wang ◽  
Jun Qiu
Keyword(s):  
Sound Wave ◽  
Sound Pressure Level ◽  
Sound Pressure ◽  
Sound Field ◽  
Pressure Level ◽  
Velocity Variation ◽  
Time Range ◽  
Sound Waves ◽  
Cloud Droplets ◽  
Acoustic Frequency

AbstractRecently strong sound wave was proposed to enhance precipitation. The theoretical basis of this proposal has not been effectively studied either experimentally or theoretically. Based on the microscopic parameters of atmospheric cloud physics, this paper solved the complex nonlinear differential equation to show the movement characteristics of cloud droplets under the action of sound waves. The motion process of individual cloud droplet in a cloud layer in the acoustic field is discussed as well as the relative motion between two cloud droplets. The effects of different particle sizes and sound field characteristics on particle motion and collision are studied to analyze the dynamic effects of thunder-level sound waves on cloud droplets. The amplitude of velocity variation has positive correlation with Sound Pressure Level (SPL) and negative correlation with the frequency of the surrounding sound field. Under the action of low-frequency sound waves with sufficient intensity, individual cloud droplets could be forced to oscillate significantly. The droplet smaller than 40μm can be easily driven by sound waves of 50 Hz and 123.4 dB. The calculation of the collision process of two droplets reveals that the disorder of motion for polydisperse droplets is intensified, resulting in the broadening of the collision time range and spatial range. When the acoustic frequency is less than 100Hz (@ 123.4dB) or the Sound Pressure Level (SPL) is greater than 117.4dB (@ 50Hz), the sound wave can affect the collision of cloud droplets significantly. This study provides theoretical perspective of acoustic effect to the microphysics of atmospheric clouds.

Investigation on collision-coalescence of droplets under the synergistic effect of charge and sound waves: orthogonal design optimization

2021 ◽  
Author(s):  
Fuyou He ◽  
li jiawei_hust ◽  
Chuan Li ◽  
Pengyu Wang ◽  
Zutao Wang ◽  
...  
Keyword(s):  
Sound Pressure Level ◽  
Sound Pressure ◽  
Orthogonal Design ◽  
Pressure Level ◽  
Collision Probability ◽  
Droplet Growth ◽  
Sound Waves ◽  
Growth Ratio ◽  
Acoustic Frequency ◽  
The Impact

Abstract As an efficient approach to improve the visibility, defogging technology is essential for the operation of ports and airports. This paper proposes a new and hybrid defogging technology, i.e. electric–acoustic defogging method. Specifically, the droplets are charged by corona discharge, which is beneficial to overcome the hydrodynamic interaction force to improve the droplet collision efficiency. Meanwhile, sound waves (especially acoustic turbulence) promote the relative movement of droplets to increase the collision probability. In this study, the effects of acoustic frequency ( f ), sound pressure level (SPL), and voltage (V) on the droplet growth ratio were studied by orthogonal design analysis. The results of difference analysis and multi-factor variance analysis show that frequency and sound pressure level are the dominant factors that affect the collision of droplets, and the effect of voltage is relatively weak. And f = 400 Hz, SPL = 132 dB, and V = -7.2 kV are the optimal parameters in our experiment. In addition, we further studied the impact of single factor on droplet growth ratio. The results show that there is an optimal frequency of 400 Hz. That is, the impact of frequency is non-linear. The droplet growth ratio increases with sound pressure level and voltage level. The new technology proposed in this paper can provide a new approach for defogging in open space.

Experimental investigation on noise radiation characteristics of pulse detonation turbine engine

2016 ◽  
Vol 231 (2) ◽  
pp. 254-264
Author(s):  
Xiqiao Huang ◽  
Zhuo Guo ◽  
Kai Liu ◽  
Moqi Li ◽  
Longxi Zheng
Keyword(s):  
Sound Pressure Level ◽  
Sound Pressure ◽  
Single Pulse ◽  
Pressure Level ◽  
Radiation Characteristics ◽  
Two Phase ◽  
Turbine Engine ◽  
Noise Radiation ◽  
Pulse Detonation ◽  
Radial Turbine

The noise radiation characteristics of two-phase pulse detonation combustor and pulse detonation turbine engine were investigated under different operating frequencies utilizing gasoline as fuel and air as oxidizer. The sound pressure data of noise radiation were presented for both single-pulse detonation combustor tube and pulse detonation turbine engine. The experimental results implied that the peak sound pressure level of PDTE exit with inner diameter being 60 mm was about 157 dB under the operating frequencies which varied from 5 Hz to 25 Hz, while the peak sound pressure level of single-pulse detonation combustor tube exit was about 170 dB under the same condition. The far-field jet-noise measurements of the pulse detonation turbine engine showed that radial turbine interacting with the pulse detonation combustor could decrease the peak sound pressure level of pulse detonation combustor with the maximum acoustic attenuation being approximately 14.2 dB for the current test conditions, which could be contributed to the energy extraction by the radial turbine from the pulse detonation combustor exhaust flow. The sound pressure level of both pulse detonation combustor and pulse detonation turbine engine exit was function of directivity angle from the exhaust centerline. In all the experiments, the equivalence ratio of gasoline/air mixture and the fill fraction were 1.2 and 1.0, respectively.

Contributions of Voice and Nonverbal Communication to Perceived Masculinity–Femininity for Cisgender and Transgender Communicators

2020 ◽  
Vol 63 (4) ◽  
pp. 931-947
Author(s):  
Teresa L. D. Hardy ◽  
Carol A. Boliek ◽  
Daniel Aalto ◽  
Justin Lewicke ◽  
Kristopher Wells ◽  
...  
Keyword(s):  
Fundamental Frequency ◽  
Sound Pressure Level ◽  
Sound Pressure ◽  
Vocal Tract ◽  
Presentation Mode ◽  
Pressure Level ◽  
Presentation Modes ◽  
Audiovisual Stimuli ◽  
Vocal Tract Resonance ◽  
Point Light

Purpose The purpose of this study was twofold: (a) to identify a set of communication-based predictors (including both acoustic and gestural variables) of masculinity–femininity ratings and (b) to explore differences in ratings between audio and audiovisual presentation modes for transgender and cisgender communicators. Method The voices and gestures of a group of cisgender men and women ( n = 10 of each) and transgender women ( n = 20) communicators were recorded while they recounted the story of a cartoon using acoustic and motion capture recording systems. A total of 17 acoustic and gestural variables were measured from these recordings. A group of observers ( n = 20) rated each communicator's masculinity–femininity based on 30- to 45-s samples of the cartoon description presented in three modes: audio, visual, and audio visual. Visual and audiovisual stimuli contained point light displays standardized for size. Ratings were made using a direct magnitude estimation scale without modulus. Communication-based predictors of masculinity–femininity ratings were identified using multiple regression, and analysis of variance was used to determine the effect of presentation mode on perceptual ratings. Results Fundamental frequency, average vowel formant, and sound pressure level were identified as significant predictors of masculinity–femininity ratings for these communicators. Communicators were rated significantly more feminine in the audio than the audiovisual mode and unreliably in the visual-only mode. Conclusions Both study purposes were met. Results support continued emphasis on fundamental frequency and vocal tract resonance in voice and communication modification training with transgender individuals and provide evidence for the potential benefit of modifying sound pressure level, especially when a masculine presentation is desired.

Case study: Theoretical calculation model and variable condition analysis research on the water-splashing noise for natural draft wet cooling towers

2020 ◽  
Vol 68 (2) ◽  
pp. 137-145
Author(s):  
Yang Zhouo ◽  
Ming Gao ◽  
Suoying He ◽  
Yuetao Shi ◽  
Fengzhong Sun
Keyword(s):  
Theoretical Model ◽  
Sound Pressure Level ◽  
Water Droplet ◽  
Water Distribution ◽  
Sound Pressure ◽  
Cooling Tower ◽  
Distribution Patterns ◽  
Calculation Model ◽  
Pressure Level ◽  
Cooling Towers

Based on the basic theory of water droplets impact noise, the generation mechanism and calculation model of the water-splashing noise for natural draft wet cooling towers were established in this study, and then by means of the custom software, the water-splashing noise was studied under different water droplet diameters and water-spraying densities as well as partition water distribution patterns conditions. Comparedwith the water-splashing noise of the field test, the average difference of the theoretical and the measured value is 0.82 dB, which validates the accuracy of the established theoretical model. The results based on theoretical model showed that, when the water droplet diameters are smaller in cooling tower, the attenuation of total sound pressure level of the water-splashing noise is greater. From 0 m to 8 m away from the cooling tower, the sound pressure level of the watersplashing noise of 3 mm and 6 mm water droplets decreases by 8.20 dB and 4.36 dB, respectively. Additionally, when the water-spraying density becomes twice of the designed value, the sound pressure level of water-splashing noise all increases by 3.01 dB for the cooling towers of 300 MW, 600 MW and 1000 MW units. Finally, under the partition water distribution patterns, the change of the sound pressure level is small. For the R s/2 and Rs/3 partition radius (Rs is the radius of water-spraying area), when the water-spraying density ratio between the outer and inner zone increases from 1 to 3, the sound pressure level of water-splashing noise increases by 0.7 dB and 0.3 dB, respectively.

Sign in / Sign up

Export Citation Format

Share Document