Numerical Investigation of Natural Convection of Nanofluids in L-Shaped Enclosures

2013 ◽  
Vol 849 ◽  
pp. 391-396
Author(s):  
Nor Azwadi Che Sidik ◽  
Arman Safdari
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Transfer Rate ◽  
Flow Behavior ◽  
Cu Nanoparticles ◽  
Numerical Investigations ◽  
Flow And Heat Transfer ◽  
Water Based

This paper presents numerical investigations of the thermal and fluid flow behavior in an L-shaped of cavity filled with nanofluid. For this purpose, five different water based Cu nanoparticles were selected with concentration of 1%, 3% and 5% were used. Effects of the presence of nanoparticles on the thermal and fluid flow in the enclosure were investigated in different Rayleigh number (Ra = 103, 104 and 105). Results show that the characteristic of flow and heat transfer are mainly dependent on the dimensionless Rayleigh number. We also found that the presence of nanoparticle enhances the heat transfer rate in the enclosure.

Numerical Investigation of 2-D Free Convection of Nanofluid in L-Shaped Enclosure

2013 ◽  
Vol 315 ◽  
pp. 433-437
Author(s):  
Nor Azwadi Che Sidik ◽  
Arman Safdari
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Rayleigh Number ◽  
Free Convection ◽  
Transfer Rate ◽  
Flow Behavior ◽  
Numerical Investigations ◽  
Flow And Heat Transfer ◽  
Vertical Walls ◽  
Higher Temperature

This paper presents numerical investigations of the thermal and fluid flow behavior in an L-shaped of cavity filled with nanofluid. The left and bottom walls are heated to higher temperature than the horizontal upper and right vertical walls. The results show that the characteristic of flow and heat transfer are critically dependent on the dimensionless Rayleigh number. We also found that the presence of nanoparticle enhances the heat transfer rate in the enclosure.

scholarly journals Effect of Fin Length and Location on Natural Convection Heat Transfer in a Wavy Cavity

2020 ◽  
Vol 7 (3) ◽  
Author(s):  
M. Fayz-Al-Asad ◽  
M. J. H. Munshi ◽  
M.M.A. Sarker
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Fluid Flow ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Flow Structure ◽  
Model Parameters ◽  
Flow And Heat Transfer ◽  
Wavy Cavity ◽  
Fin Length

The present study aims to analyze the natural convection flow and heat transfer in a wavy cavity with a single horizontal fin attached to its hot wall. Galerkin weighted residual finite element technique has been employed to solve the governing nonlinear dimensionless equations. The effects of model parameters like Rayleigh number, fin length and location on the fluid flow and heat transfer are investigated. The obtained results are exhibited graphically in terms of flow structure, temperature dispersion, velocity field, fin effectiveness, local Nusselt number, and average Nusselt number. It is observed that the different fin length and location have a substantial effect on flow structure and temperature field. Fin effectiveness is also studied and the highest fin effectiveness was found at fin length (L = 0.75). Besides, it is also found that the mean Nusselt number increases significantly with the increase of Rayleigh number and fin length. Wavy cavity becomes more effective on heat transfer behaviors and fluid flow than that of a square cavity.

Natural convection in a triangular cavity filled with a micropolar fluid

2017 ◽  
Vol 27 (2) ◽  
pp. 504-515 ◽  
Author(s):  
Mikhail Sheremet ◽  
Teodor Grosan ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Prandtl Number ◽  
Micropolar Fluid ◽  
Content Type ◽  
Viscosity Parameter ◽  
Flow And Heat Transfer ◽  
Wide Range

Purpose The purpose of this paper is to study steady natural convection flow and heat transfer in a triangular cavity filled with a micropolar fluid. Design/methodology/approach It is assumed that the left inclined wall is heated, whereas the other walls are cooled and maintained at constant temperatures. All four walls of the cavity are assumed to be rigid and impermeable. The micropolar fluid is considered to satisfy the Boussinesq approximation. The governing equations and boundary conditions are solved using the finite difference method of the second order accuracy over a wide range of the Rayleigh number, Prandtl number, vortex viscosity parameter and two values of micro-gyration parameter, namely, strong concentration (n = 0) and week concentration (n = 0.5). Findings The results are presented in the form of streamlines, isotherms, vorticity contours and variations of average Nusselt number and fluid flow rate depending on the Rayleigh number, Prandtl number, vortex viscosity parameter and micro-gyration parameter. The flow field and temperature distribution in the cavity are affected by these parameters. The heat transfer rate into the cavity is decreasing upon the raise of the vortex viscosity parameter. Originality/value This work studies the effects of vortex viscosity parameter and micro-gyration parameter in a triangular cavity filled with a micropolar fluid on the fluid flow and heat transfer. This study might be useful to flows of biological fluids in thin vessels, polymeric suspensions, liquid crystals, slurries, colloidal suspensions, exotic lubricants; for the design of solar collectors, room ventilation systems and electronic cooling systems; and so on.

scholarly journals A RANS K-? SIMULATION OF 2D TURBULENT NATURAL CONVECTION IN AN ENCLOSURE WITH HEATING SOURCES

2019 ◽  
Vol 20 (1) ◽  
pp. 229-244
Author(s):  
Mehdi Ahmadi ◽  
Seyed Ali Agha Mirjalily ◽  
Seyed Amir Abbas Oloomi
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Kinetic Energy ◽  
Aspect Ratio ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Turbulent Natural Convection ◽  
Cold Source ◽  
Thermal Sources

ABSTRACT: This study is conducted to investigate turbulent natural convection flow in an enclosure with thermal sources using the low-Reynolds number (LRN) k-? model. This enclosure has a cold source with temperature Tc and a hot source with temperature Th as thermal sources, other walls of the enclosure are adiabatic. The aim of this study is to predict the effect of change in Rayleigh number, repositioning of cold and hot sources, and thermal sources aspect ratio on the flow field, temperature, and rate of heat transfer. To achieve this aim, the equations of continuity, momentum, energy, turbulent kinetic energy, and kinetic energy dissipation are employed in the case of 2D turbulence with constant thermo-physical properties except the density in the buoyancy term (Boussinesq approximation). To numerically solve these equations, the finite volume method and SIMPLE algorithm are used. According to the modeling results, the most optimal temperature distribution in the enclosure is seen when the hot source is below the cold source. With decreasing distance between hot and cold sources, heat transfer rate increases. The maximal heat transfer rate is derived via study of the heating sources aspect ratio. In constant positions of cold and hot sources on a wall, the heat transfer rate increases with increasing Rayleigh number (Ra=109-1011). ABSTAK: Kajian ini dijalankan bagi mengkaji perubahan semula jadi aliran perolakan dalam tempat tertutup dengan sumber haba menggunakan model k-? nombor Reynolds-rendah (LRN). Bekas tertutup ini mempunyai dua sumber haba iaitu sumber sejuk dengan suhu Tc dan sumber panas dengan suhu Th, manakala dinding lain bekas ini adalah adiabatik. Tujuan kajian ini adalah bagi mengesan perubahan nombor Rayleigh, mengubah sumber sejuk dan panas dan nisbah sumber haba kepada kawasan aliran, suhu dan halaju perubahan haba. Bagi mencapai tujuan tersebut, persamaan sambungan, momentum, tenaga, tenaga kinetik perolakan, dan pengurangan tenaga kinetik telah dilaksanakan dalam kes perolakan 2D dengan sifat fizikal-haba berterusan (malar) kecuali isipadu terma keapungan (anggaran Boussinesq). Bagi menyelesaikan persamaan ini secara berangka, kaedah isipadu terhad dan algorithma MUDAH telah digunakan. Berdasarkan keputusan model, suhu distribusi optimal dalam bekas tertutup dilihat apabila sumber panas adalah kurang daripada sumber sejuk. Dengan pengurangan jarak antara sumber panas dan sejuk, kadar pertukaran haba meningkat. Kadar pertukaran haba maksima telah diperoleh melalui kajian nisbah  aspek sumber pemanasan. Kadar pertukaran haba bertambah dengan bertambahnya nombor Rayleigh  (Ra=109-1011), pada posisi tetap sumber sejuk dan panas pada dinding bekas.

Fluid flow and heat transfer of a stratified system during natural convection – influence of chamfered corners

2019 ◽  
Vol 29 (2) ◽  
pp. 470-486 ◽  
Author(s):  
Alireza Rahimi ◽  
Aravindhan Surendar ◽  
Aygul Z. Ibatova ◽  
Abbas Kasaeipoor ◽  
Emad Hasani Malekshah
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Natural Convection ◽  
Entropy Generation ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Three Dimensional ◽  
Immiscible Fluids ◽  
Content Type ◽  
Flow And Heat Transfer

Purpose This paper aims to investigate the three-dimensional natural convection and entropy generation in the rectangular cuboid cavities included by chamfered triangular partition made by polypropylene. Design/methodology/approach The enclosure is filled by multi-walled carbon nanotubes (MWCNTs)-H2O nanofluid and air as two immiscible fluids. The finite volume approach is used for computation. The fluid flow and heat transfer are considered with combination of local entropy generation due to fluid friction and heat transfer. Moreover, a numerical method is developed based on three-dimensional solution of Navier–Stokes equations. Findings Effects of side ratio of triangular partitions (SR = 0.5, 1 and 2), Rayleigh number (103 < Ra < 105) and solid volume fraction (f = 0.002, 0.004 and 0.01 Vol.%) of nanofluid are investigated on both natural convection characteristic and volumetric entropy generation. The results show that the partitions can be a suitable method to control fluid flow and energy consumption, and three-dimensional solutions renders more accurate results. Originality/value The originality of this work is to study the three-dimensional natural convection and entropy generation of a stratified system.

Sign in / Sign up

Export Citation Format

Share Document