Hydraulic Fracturing Technology Design in Natural Fracture Reservoirs

2014 ◽  
Vol 941-944 ◽  
pp. 2521-2524
Author(s):  
Bo Cai ◽  
Yun Hong Ding ◽  
Zhou Qi Cui ◽  
Zhen Zhou Yang ◽  
Hua Shen
Keyword(s):  
Numerical Simulation ◽  
Hydraulic Fracturing ◽  
Pore Volume ◽  
Igneous Rock ◽  
Natural Fracture ◽  
Low Permeability ◽  
Fracture System ◽  
The Core ◽  
Limited Scale ◽  
Low Permeability Reservoirs

Nowadays, hydraulic fracturing has become the mainly treatment in low permeability reservoirs, but the hydraulic fracturing design technology in different reservoirs still use common methods. Natural fracture reservoirs mainly include granite reservoir, basalt reservoir and igneous rock reservoir which its hydrocarbon pore volume is fracture system. As the existing of natural fracture, hydraulic fracturing treatment always counting some problems, such as difficult sand pumping, easily screen-out and limited scale. In this paper, from the point of the reservoir characteristics, the mainly problems were analyzed and the corresponding methods were put forward .the core technique in this kind reservoir include communicating the distance nature fracture and meanwhile protecting the conductivity nature fracture. Production can reach 90% from natural fractures using numerical simulation.

scholarly journals A New Method for Artificial Core Reconstruction of a Fracture-Control Matrix Unit

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Qiang Liu ◽  
Jianjun Liu ◽  
Guihong Pei ◽  
Zhengwen Zhu ◽  
Yun Lei
Keyword(s):  
Numerical Simulation ◽  
Fractured Reservoirs ◽  
Low Permeability ◽  
Fracture System ◽  
Matrix System ◽  
The Core ◽  
Matrix Unit ◽  
The Matrix ◽  
Control Matrix ◽  
Fracture Control

The fracture-control matrix unit (F-CMU) is a special body present in low-permeability fractured reservoirs that can be distinguished by a fracture system and a matrix system. The imbibition phenomenon of the F-CMU provides the possibility for secondary development of low-permeability fractured reservoirs because of the driving force including capillary force and gravity. However, the F-CMU is difficult to obtain during the field core drilling, which has limited the development for laboratory dynamic imbibition tests. Therefore, a new F-CMU reconstruction method is proposed in this study. According to the geometry and parameters, combining laser engraving technology, the fracture system is designed and engraved. Then, the F-CMU is established using a three-dimensional (3D) printed material called polyvinyl alcohol (PVA) as fracture support material which has a faster dissolution rate and causes less damage to the core due to water being the solvent. Finally, the porosity, permeability, and wettability of the matrix system and the T2 spectra from nuclear magnetic resonance (NMR) before and after reconstruction are measured. In addition, numerical simulation calculation of F-CMU permeability is performed. The results show that the characteristic parameters of the matrix system hardly change, indicating low damage to the core. The reconstructed fracture system is found on the T2 spectra, and the fracture permeability is consistent by comparing with the experimental and numerical simulation results. The permeability of the fracture system is about 104 orders of magnitude of the matrix system, which is closer to real core and meets the requirements needed for dynamic permeability experiments.

scholarly journals A new slick water system for hydraulic fracturing in tight reservoir to enhance imbibition oil recovery

2021 ◽  
Vol 303 ◽  
pp. 01001
Author(s):  
Yu Haiyang ◽  
Ji Wenjuan ◽  
Luo Cheng ◽  
Lu Junkai ◽  
Yan Fei ◽  
...  
Keyword(s):  
Contact Angle ◽  
Interfacial Tension ◽  
Hydraulic Fracturing ◽  
Oil Recovery ◽  
Water System ◽  
Natural Fracture ◽  
Fracturing Fluid ◽  
The Core ◽  
Ultralow Permeability

In order to give full play to the role of imbibition of capillary force and enhance oil recovery of ultralow permeability sandstone reservoir after hydraulic fracturing, the mixed water fracture technology based on functional slick water is described and successfully applied to several wells in oilfield. The core of the technology is determination of influence factors of imbibition oil recovery, the development of new functional slick water system and optimization of volume fracturing parameters. The imbibition results show that it is significant effect of interfacial tension, wetting on imbibition oil recovery. The interfacial tension decreases by an order of magnitude, the imbibition oil recovery reduces by more than 10%. The imbibition oil recovery increases with the contact angle decreasing. The emulsifying ability has no obvious effect on imbibition oil recovery. The functional slick water system considering imbibition is developed based on the solution rheology and polymer chemistry. The system has introduced the active group and temperature resistant group into the polymer molecules. The molecular weight is controlled in 1.5 million. The viscosity is greater than 2mPa·s after shearing 2h under 170s-1 and 100℃. The interfacial tension could decrease to 10-2mN/m. The contact angle decreased from 58° to 22° and the core damage rate is less than 12%. The imbibition oil recovery could reach to 43%. The fracturing process includes slick water stage and linear gel stage. 10% 100 mesh ceramists and 8% temporary plugging agents are carried into the formation by functional slick water. 40-70 mesh ceramists are carried by linear gel. The liquid volume ratio is about 4:1 and the displacement is controlled at 10-12m3/min. The sand content and fracturing fluid volumes of single stage are 80m3 and 2500 m3 respectively. Compared with conventional fracturing, due to imbibition oil recovery, there is only 25% of the fracturing fluid flowback rate when the crude oil flew out. When the oil well is in normal production, about 50% of the fracturing fluid is not returned. It is useful to maintain the formation energy and slow down the production decline. The average cumulative production of vertical wells is greater than 2800t, and the effective period is more than 2 years. This technology overcoming the problem of high horizontal stress difference and lack of natural fracture has been successfully applied in Jidong Oilfield ultralow permeability reservoir. The successful application of this technology not only helps to promote the effective use of ultralow permeability reservoirs, but also helps to further clarify the role of imbibition recovery, energy storage and oil-water replacement mechanism.

Low-Damage Hydraulic Fracturing Design Technique to Exploration Wells of Erlian Basin in China

2013 ◽  
Vol 753-755 ◽  
pp. 48-52
Author(s):  
Bo Cai ◽  
Yun Hong Ding ◽  
Yuan Peng Shi ◽  
Yong Jun Lu
Keyword(s):  
Hydraulic Fracturing ◽  
Field Application ◽  
Oil Fields ◽  
Low Permeability ◽  
Consumer Market ◽  
Damage Degree ◽  
Potential Part ◽  
Fracture Damage ◽  
Low Permeability Reservoirs ◽  
Erlian Basin

In China,more and more low permeability reservoirs have become the mainly oil production potential part for the soaring consumer market. Hydraulic fracturing treatment has always been playing an important role in these low permeability reservoirs.however,some inappropricate fracturing designs and treatments may decrease the productions as a result of high damage within both formations and artifical fractures.In order to minimize reduce formation and fracture damage, we take the wells in Erlian Basin as an example to explain the low-damage hydraulic fracturing technique which had been used in many of oil fields .Through eight years step by step study and field application, a comprehensive industrialize design technology was put forward. By the application of this technique, the low-damage degree is highlighted compared to the past.As a result the performance of post-fracturing wells have remarkably improved.

scholarly journals 3D reconstruction of low-permeability heterogeneous glutenites and numerical simulation of hydraulic fracturing behavior

2015 ◽  
Vol 61 (1) ◽  
pp. 82-93 ◽  
Author(s):  
YingChun GUO ◽  
Yang JU ◽  
LianGe ZHENG ◽  
YongMing YANG ◽  
Peng LIU ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Hydraulic Fracturing ◽  
3D Reconstruction ◽  
Low Permeability

scholarly journals Improving Oil Recovery of the Heterogeneous Low Permeability Reservoirs by Combination of Polymer Hydrolysis Polyacrylamide and Two Highly Biosurfactant-Producing Bacteria

2021 ◽  
Vol 14 (1) ◽  
pp. 423
Author(s):  
Shuwen Xue ◽  
Yanhong Zhao ◽  
Chunling Zhou ◽  
Guangming Zhang ◽  
Fulin Chen ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Low Permeability ◽  
Bacterial Fermentation ◽  
The Core ◽  
Oil Displacement ◽  
Polymer Hydrolysis ◽  
Enhance Oil Recovery ◽  
Low Permeability Reservoirs ◽  
Microbial Flooding ◽  
Poly Acrylamide

Polymer hydrolysis polyacrylamide and microbes have been used to enhance oil recovery in many oil reservoirs. However, the application of this two-method combination was less investigated, especially in low permeability reservoirs. In this work, two bacteria, a rhamnolipid-producing Pseudomonas aeruginosa 8D and a lipopeptide-producing Bacillus subtilis S4, were used together with hydrolysis poly-acrylamide in a low permeability heterogeneous core physical model. The results showed that when the two bacterial fermentation liquids were used at a ratio by volumeof 1:3 (v:v), the mixture showed the optimal physicochemical properties for oil-displacement. In addition, the mixture was stable under the conditions of various temperature (20–70 °C) and salinity (0–22%). When the polymer and bacteria were mixed together, it had no significant effects in the viscosity of polymer hydrolysis polyacrylamide and the viability of bacteria. The core oil-displacement test displayed that polymer hydrolysis polyacrylamide addition followed by the bacterial mixture injection could significantly enhance oil recovery. The recovery rate was increased by 15.01% and 10.03%, respectively, compared with the sole polymer hydrolysis polyacrylamide flooding and microbial flooding. Taken together, these results suggest that the strategy of polymer hydrolysis poly-acrylamide addition followed by microbial flooding is beneficial for improving oil recovery in heterogeneous low permeability reservoirs.

scholarly journals The efficiency of gas injection into low-permeability multilayer hydrocarbon reservoirs

2021 ◽  
Vol 3 (10) ◽  
pp. 100-108
Author(s):  
Sudad H AL-Obaidi ◽  
Miel Hofmann ◽  
Falah H. Khalaf ◽  
Hiba H. Alwan
Keyword(s):  
Hydraulic Fracturing ◽  
Oil Recovery ◽  
Gas Injection ◽  
Oil Production ◽  
Recovery Factor ◽  
Low Permeability ◽  
Compositional Model ◽  
Multistage Hydraulic Fracturing ◽  
Low Permeability Reservoirs ◽  
Working Agent

The efficiency of gas injection for developing terrigenous deposits within a multilayer producing object is investigated in this article. According to the results of measurements of the 3D hydrodynamic compositional model, an assessment of the oil recovery factor was made. In the studied conditions, re-injection of the associated gas was found to be the most technologically efficient working agent. The factors contributing to the inefficacy of traditional methods of stimulating oil production such as multistage hydraulic fracturing when used to develop low-permeability reservoirs have been analyzed. The factors contributing to the inefficiency of traditional oil-production stimulation methods, such as multistage hydraulic fracturing, have been analysed when they are applied to low-permeability reservoirs. The use of a gas of various compositions is found to be more effective as a working agent for reservoirs with permeability less than 0.005 µm2. Ultimately, the selection of an agent for injection into the reservoir should be driven by the criteria that allow assessing the applicability of the method under specific geological and physical conditions. In multilayer production objects, gas injection efficiency is influenced by a number of factors, in addition to displacement, including the ratio of gas volumes, the degree to which pressure is maintained in each reservoir, as well as how the well is operated. With the increase in production rate from 60 to 90 m3 / day during the re-injection of produced hydrocarbon gas, this study found that the oil recovery factor increased from 0.190 to 0.229. The further increase in flow rate to 150 m3 / day, however, led to a faster gas breakthrough, a decrease in the amount of oil produced, and a decrease in the oil recovery factor to 0.19 Based on the results of the research, methods for stimulating the formation of low-permeability reservoirs were ranked based on their efficacy.

Sign in / Sign up

Export Citation Format

Share Document