scholarly journals Monitoring and Control System of Discomfort in Disability, Bed Rest People and Surgical Patients

2008 ◽  
Vol 60 ◽  
pp. 164-169
Author(s):  
M.A.F. Carvalho ◽  
F.B.N. Ferreira ◽  
H. Carvalho ◽  
José Gerardo Rocha ◽  
L.B. Martins ◽  
...  
Keyword(s):  
Bed Rest ◽  
Healthy Person ◽  
Surgical Patients ◽  
Monitoring And Control ◽  
Monitoring And Control System ◽  
The People ◽  
Welfare Quality ◽  
Support Surfaces ◽  
And Control

Project aims to develop a system that allows to provide to the People with Special Needs (PSN) a relief to the level of the sensitive perception of discomfort, assuring greater independence, welfare, quality of life, prevention of illnesses/wounds, through the development of textile and polymers applications (cushions, mattresses and mattresses overlays) with functions of monitoring and control of pressure in the body's areas in contact with the support surfaces. In this group of PSN will be enclosed the people with serious motor limitations conditioning their mobility/deambulation, such as bed rest people, patients under effect of sedatives or anaesthesia during long surgeries (intra and post operative), patients and users in general of wheelchairs. These people have, for the most part of the cases, a commitment of sensitivity in the body's areas in contact with the support surfaces, or its motor capacity does not allow them to move regularly of position autonomously, as it would do a healthy person unconsciously. Then, insufficient sanguineous irrigation occurs as result of pressure exceeding too long the tissue capillary pressure depriving tissues of oxygen and essential nutrients, owing to ischemia and hypoxia, which then causes the pressure ulcers (PU) development.

scholarly journals Monitoring and Control System of Discomfort in Disability, Bed Rest People and Surgical Patients

2008 ◽  
pp. 164-169 ◽  
Author(s):  
M.A.F. Carvalho ◽  
F.B.N. Ferreira ◽  
H. Carvalho ◽  
José Gerardo Rocha ◽  
L.B. Martins ◽  
...  
Keyword(s):  
Control System ◽  
Bed Rest ◽  
Surgical Patients ◽  
Monitoring And Control ◽  
Monitoring And Control System ◽  
And Control

Development of Improved Liming Process based on Automated pH Monitoring and Control System

2021 ◽  
Vol 116 (6) ◽  
Author(s):  
N. Vedaraman ◽  
Kota Srinivas ◽  
D. Krishnamoorthy ◽  
V. Aparna ◽  
V. P. Anand ◽  
...  
Keyword(s):  
Ph Monitoring ◽  
Nonlinear Behaviour ◽  
Monitoring And Control ◽  
Time Data ◽  
Monitoring And Control System ◽  
Ph Values ◽  
Monitoring And Control Systems ◽  
Spent Liquor ◽  
And Control

The control of pH of a process plays an important role in many chemical or biological reactions. The monitoring and control of pH of processes like wastewater treatment, manufacturing food and leather making facilitate to reduce pollution and improve the quality of the final product. The focus of this study is to optimize the usage of lime and recycling of spent liquor through continuous monitoring system of pH to achieve near zero residue from liming operation. But the challenges are nonlinear behaviour of the system and frequent fouling of pH sensors. The system developed monitors the pH values and controls the cycling time and the addition of lime as per the user set profile. The real time data of pH values in the process is logged on to the PC for further analysis. The efficacy of the system developed was validated at lab level and can be easily scaled up for implementation in industries. The results showed that the effluent from leather making can be minimized by adopting automated pH monitoring and control systems.

scholarly journals Survey on Design and Implementation of Indoor Environment Monitoring and control system

2018 ◽  
Vol 7 (04) ◽  
pp. 23808-23816
Author(s):  
Hashi Haris
Keyword(s):  
Internet Of Things ◽  
Indoor Environment ◽  
Home Automation ◽  
Environment Monitoring ◽  
Monitoring And Control ◽  
Monitoring And Control System ◽  
Iot Devices ◽  
And Control ◽  
The Internet Of Things

The ideology of the Internet of things has emerged due to the consolidation of multiple technologies. IoT devices are a part of the larger concept of  home automation, also known as domotics. The application of Internet of Things in indoor environment monitoring and control has become a major area as people paying more attention to quality of environment. Intelligent solutions are proposed by studying key technologies of IoT. The system provides a new application for IoT.

Development of Monitoring and Control System for Laser Remanufacturing

2010 ◽  
Vol 44-47 ◽  
pp. 81-85 ◽  
Author(s):  
Xiao Dong Hu ◽  
Fan Zhi Kong ◽  
Jian Hua Yao
Keyword(s):  
Control System ◽  
Control Method ◽  
Test Results ◽  
Monitoring And Control ◽  
Fuzzy Pid Control ◽  
Monitoring And Control System ◽  
Software Interface ◽  
And Control ◽  
Stable Flow

In order to monitor the process of laser remanufacturing and control the quality of remanufacturing, a monitoring and control system for laser remanufacturing was constructed with its hardware and software. The schedule of the system including signal condition, software interface, sampling and control method, was introduced. Infra-red thermometer with dynamic aiming device was designed to track the molten pool location. Photoelectric sensor was developed to measure the flow of powder. The contrast test results show that the fuzzy PID control system for powder feeding could achieve stable flow.

Design and Realization of Automatic Control System in Process of Plasma Extraction

2013 ◽  
Vol 456 ◽  
pp. 555-558
Author(s):  
Wei Ren ◽  
Yan Wang
Keyword(s):  
Control System ◽  
Pid Control ◽  
Extraction Process ◽  
Monitoring And Control ◽  
Monitoring And Control System ◽  
Biological Technology ◽  
And Control ◽  
Design Ideas ◽  
Plasma Extraction

The temperature is an important technical index of the plasma extraction process, which directly affects the quality of plasma products. This paper describes the key technology of temperature monitoring and control system, the system design ideas, hardware structure, and software function. The system uses PID control theory. It can monitor 46 temperature points and control the temperature. This system has been successfully applied to Tangshan Huakai Biological Technology Co., Ltd.. The practice shows that the system has good performance, and identified by Tangshan Institute of Metrology and Measurement.

DEVELOPMENT OF COMPUTERIZED MONITORING AND CONTROL SYSTEM OF THE MOBILE ROBOT’S POSITIONING ON LARGE FERROMAGNETIC SURFACES BASED ON INTELLIGENT TECHNIQUES. COMPLEX OF TASKS OF MONITORING AND AUTOMATIC CONTROL OF MOBILE

2019 ◽  
pp. 37-47
Author(s):  
Yao Yueqin ◽  
Oleksiy Kozlov ◽  
Oleksandr Gerasin ◽  
Galyna Kondratenko
Keyword(s):  
Automatic Control ◽  
Point Of View ◽  
Monitoring And Control ◽  
Large Area ◽  
Monitoring And Control System ◽  
Technical Parameters ◽  
Automatic Control Systems ◽  
Current State ◽  
Computerized Monitoring ◽  
And Control

Analysis and formalization of the monitoring and automatic control tasks of the MR for the movement and execution of various types of technological operations on inclined and vertical ferromagnetic surfaces are obtained. Generalized structure of mobile robotic complex is shown with main subsystems consideration. Critical analysis of the current state of the problem of development of universal structures of mobile robots (MRs) for the various types of technological operations execution and elaborations of computerized systems for monitoring and control of MR movement is done. In particular, wheeled, walked and crawler type MRs with pneumatic, vacuum-propeller, magnetic and magnetically operated clamping devices to grip with vertical and ceiling surfaces are reviewed. The constructive features of the crawler MR with magnetic clamping devices capable of moving along sloping ferromagnetic surfaces are considered. The basic technical parameters of the MR are shown for the further synthesis of computerized monitoring and automatic control systems. Formalization of the tasks of monitoring and control of the MR positioning at the processing of large area ferromagnetic surfaces is considered from the point of view of control theory.

DEVELOPMENT OF COMPUTERIZED MONITORING AND CONTROL SYSTEM OF THE MOBILE ROBOT’S POSITIONING ON LARGE FERROMAGNETIC SURFACES BASED ON INTELLIGENT TECHNIQUES. AUTOMATION OF THE MONITORING AND CONTROL PROCESSES OF MOBILE ROBOT FOR PROCESSING OF LARGE INCLINED SURFACES

2019 ◽  
pp. 41-48
Author(s):  
Yan Guojun ◽  
Oleksiy Kozlov ◽  
Oleksandr Gerasin ◽  
Galyna Kondratenko
Keyword(s):  
Control System ◽  
Mobile Robot ◽  
Functional Structure ◽  
Monitoring And Control ◽  
Technological Parameters ◽  
Monitoring And Control System ◽  
Inclined Surfaces ◽  
Computerized Monitoring ◽  
And Control ◽  
Tracked Mobile Robot

The article renders the special features of the design of a tracked mobile robot (MR) for moving over inclined ferromagnetic surfaces while performing specified technological operations. There is conducted a synthesis of the functional structure and selective technological parameters (such as control coordinates) of the computerized monitoring and control system (CMCS) intended for use with this MR. Application of the CMCS with the proposed functional structure allows substantially increasing the accuracy of the MR monitoring and control, which in turn provides for a considerable enhancement in the quality and economic efficiency of the operations on processing of large ferromagnetic surfaces.

Sign in / Sign up

Export Citation Format

Share Document