Thermal Cyclic Behaviour of Conventional YSZ and Mullite-YSZ Thermal Barrier Coatings

2020 ◽  
Vol 405 ◽  
pp. 417-422
Author(s):  
David Jech ◽  
Pavel Komarov ◽  
Michaela Remešová ◽  
Lucie Dyčková ◽  
Karel Slámečka ◽  
...  
Keyword(s):  
High Temperature ◽  
Thermal Barrier Coatings ◽  
Phase Stability ◽  
Bond Coat ◽  
Cyclic Oxidation ◽  
Thermally Grown Oxide ◽  
Atmospheric Plasma ◽  
Thermal Barrier ◽  
Barrier Coatings ◽  
Mullite Phase

Nowadays commonly used thermal barrier coatings (TBC) are based on yttria stabilized zirconia (YSZ). Addition of mullite phase into the YSZ coating can improve resulting high temperature properties. The contribution focuses on high temperature cyclic oxidation behaviour of two TBC systems with different top coats (TC) deposited by the means of atmospheric plasma spraying. The initial mullite-YSZ powder mixture consisted of 29 vol. % of mullite and 71 vol. % of YSZ. The conventional TBC system consisted of ~ 150 µm thick NiCoCrAlYHfSi bond coat (BC) and ~ 300 µm thick YSZ top coat. The experimental mullite-YSZ (MYSZ) TBC system consisted of ~ 150 µm thick NiCoCrAlYHfSi bond coat, ~ 100 µm thick YSZ interlayer and ~ 200 µm thick mullite-YSZ top coat. The experimental TBC proved higher lifetime, durability and phase stability and also lower grow rate of thermally grown oxide (TGO) compared to conventional TBC. Lifetime, phase stability and changes in the microstructure of TBCs after the furnace cyclic oxidation test were evaluated by the means of scanning electron microscopy equipped with EDX analyzer and X-ray diffraction techniques. Oxidation kinetics of TGO was calculated based on thickness determined utilizing digital image analysis.

scholarly journals Oxidation Behavior of the Monolayered La2Zr2O7, Composite La2Zr2O7 + 8YSZ, and Double-Ceramic Layered La2Zr2O7/La2Zr2O7 + 8YSZ/8YSZ Thermal Barrier Coatings

Materials ◽  
2020 ◽  
Vol 13 (14) ◽  
pp. 3242 ◽  
Author(s):  
Anna Jasik ◽  
Grzegorz Moskal ◽  
Marta Mikuśkiewicz ◽  
Agnieszka Tomaszewska ◽  
Sebastian Jucha ◽  
...  
Keyword(s):  
Thermal Barrier Coatings ◽  
Bond Coat ◽  
Microstructural Characterization ◽  
Thermally Grown Oxide ◽  
Atmospheric Plasma ◽  
Ceramic Layer ◽  
Thermal Barrier ◽  
Equal Weight ◽  
Barrier Coatings

The degradation process of thermal barrier coatings (TBCs) such as monolayered La2Zr2O7, composite 50% La2Zr2O7 + 50% 8YSZ, and double-ceramic layer (DCL) La2Zr2O7/50% La2Zr2O7 + 50% 8YSZ/8YSZ was investigated. Coatings were deposited using the atmospheric plasma spraying (APS) process (ceramic layer and bond-coat) on the Ni-based superalloy substrate with Ni-22Cr-10Al-1Y bond-coat. The thickness of the ceramic top-coats in all cases were 300 µm. In the case of La2Zr2O7/8YSZ, the internal sublayer was built from 8YSZ powder whereas the outer from La2Zr2O7. Between both sublayers’ “composite” a 50% La2Zr2O7 + 50% 8YSZ zone was present. The “composite” 50% La2Zr2O7 + 50% 8YSZ TBC system was sprayed from two different feedstock powders with equal weight ratios. In the first part of the investigation, the microstructural characterization of the TBCs was presented. The main goals were related to the characterization of the degradation processes in different TBC systems with special emphasis on the phenomenon in the thermally grown oxide (TGO) zone related to oxidation, and the phenomenon related to phase stability in ceramic top-coats as related to temperature influence. The oxidation test was carried out in air at 1100 °C for 500 h. In the second step of the investigation, the numerical simulation of the monolayered TBC 8YSZ and La2Zr2O7 systems was analyzed from the stress distribution point of view. Additionally, the two-layered TBC coating of the DCL type was also analyzed.

Preparation of 8YSZ and Double-Ceramic-Layer La2Zr2O7/8YSZ Thermal Barrier Coatings on GH4169 Superalloy Substrates and their Static High Temperature Oxidation Behaviour

2013 ◽  
Vol 749 ◽  
pp. 617-632 ◽  
Author(s):  
Liang Wang ◽  
You Wang ◽  
Xiao Guang Sun
Keyword(s):  
High Temperature ◽  
Thermal Barrier Coatings ◽  
Bond Coat ◽  
High Temperature Oxidation ◽  
Oxidation Behaviour ◽  
Atmospheric Plasma ◽  
Ceramic Layer ◽  
Thermal Barrier ◽  
Temperature Oxidation ◽  
Barrier Coatings

Thermal barrier coatings (TBCs) are very important ceramic coating materials due to their excellent performance at high temperature. Double-ceramic-layer (DCL) La2Zr2O7 (LZ)/8YSZ TBCs, nanostructured single-ceramic-layer (SCL) 8YSZ and conventional SCL 8YSZ TBCs with the same thickness were fabricated by atmospheric plasma spraying in the present work. The static high temperature oxidation behaviour of the three as-sprayed coatings at 1000 and 1200 was investigated systematically. The results indicated that the LZ/8YSZ has higher oxidation resistance than that of SCL 8YSZ. The addition of LZ ceramic layer can increase the insulation temperature, impede the oxygen transferring to the bond coat and decrease the formation rate of the thermally grown oxide (TGO). The formation of the oxidized isolated islands in the bond-coat has decreased the effective thickness of the TGO at the bond coat/ceramic layer interface due to the depletion of the metallic elements in the bond-coat.

NONDESTRUCTIVE IMPEDANCE SPECTROSCOPY EVALUATION OF THE BOND COAT OXIDATION IN THERMAL BARRIER COATINGS

2007 ◽  
Vol 14 (05) ◽  
pp. 935-943 ◽  
Author(s):  
L. YANG ◽  
Y. C. ZHOU ◽  
W. G. MAO ◽  
Q. X. LIU
Keyword(s):  
Impedance Spectroscopy ◽  
Thermal Barrier Coatings ◽  
Bond Coat ◽  
Equivalent Circuit Model ◽  
Isothermal Oxidation ◽  
Thermally Grown Oxide ◽  
Thermal Barrier ◽  
Air Plasma ◽  
Barrier Coatings ◽  
Plasma Sprayed

In this paper, the impedance spectroscopy technique was employed to examine nondestructively the isothermal oxidation of air plasma sprayed (APS) thermal barrier coatings (TBCs) in air at 800°C. Scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX) were also used to characterize the microstructure evolution of TBCs. After oxidation, the thermally grown oxide (TGO), which was mainly composed of alumina as confirmed by EDX, formed at the upper ceramic coat/bond coat interface, the lower bond coat/substrate interface, and the bond coat. Impedance diagrams obtained from impedance measurements at room temperature were analyzed according to the equivalent circuit model proposed for the TBCs. Various observed electrical responses relating to the growth of oxides and the sintering of YSZ were explained by simulating the impedance spectra of the TBCs.

Synchrotron XRD Measurements Mapping Internal Strains of Thermal Barrier Coatings During Thermal Gradient Mechanical Fatigue Loading

2014 ◽  
Author(s):  
Kevin Knipe ◽  
Albert C. Manero ◽  
Stephen Sofronsky ◽  
John Okasinski ◽  
Jonathan Almer ◽  
...  
Keyword(s):  
High Temperature ◽  
Thermal Barrier Coatings ◽  
Mechanical Loading ◽  
Bond Coat ◽  
Thermal Gradient ◽  
Room Temperature ◽  
Material Behavior ◽  
Thermal Barrier ◽  
X Rays ◽  
Barrier Coatings

An understanding of the high temperature mechanics experienced in Thermal Barrier Coatings (TBC) during cycling conditions would be highly beneficial to extending the lifespan of the coatings. This study will present results obtained using synchrotron x-rays to measure depth resolved strains in the various layers of TBCs under thermal mechanical loading and a superposed thermal gradient. Tubular specimens, coated with Yttria Stabilized Zirconia (YSZ) and an aluminum containing nickel alloy as a bond coat both through Electron Beam - Physical Vapor Deposition (EBPVD), were subjected to external heating and controlled internal cooling generating a thermal gradient across the specimen’s wall. Temperatures at the external surface were in excess of 1000 °C. Throughout high temperature testing, 2-D high-resolution XRD strain measurements are taken at various locations through the entire depth of the coating layers. Across the YSZ a strain gradient was observed showing higher compressive strain at the interface to the bond coat than towards the surface. This behavior can be attributed to the specific microstructure of the EB-PVD-coating, which reveals higher porosity at the outer surface than at the interface to the bond coat, resulting in a lower in plane modulus near the surface. This location at the interface displays the most significant variation due to applied load at room temperature with this effect diminishing at elevated uniform temperatures. During thermal cycling with a thermal gradient and mechanical loading, the bond coat strain moves from a highly tensile state at room temperature to an initially compressive state at high temperature before relaxing to zero during the high temperature hold. The results of these experiments give insight into previously unseen material behavior at high temperature which can be used to develop an increased understanding of various failure modes and their causes.

Oxidation Behavior of Thermal Barrier Coatings on Copper Substrates

2010 ◽  
Vol 66 ◽  
pp. 74-79
Author(s):  
Jana Schloesser ◽  
Martin Bäker ◽  
Joachim Rösler ◽  
Robert Pulz
Keyword(s):  
Thermal Cycling ◽  
Thermal Barrier Coatings ◽  
Bond Coat ◽  
Thermal Protection ◽  
Rocket Engine ◽  
Copper Substrate ◽  
Thermally Grown Oxide ◽  
Substrate Material ◽  
Thermal Barrier ◽  
Barrier Coatings

In rocket engine combustion chambers, the cooling channels experience extremely high temperatures and environmental attack. Thermal protection can be provided by Thermal Barrier Coatings. Due to the need of good heat conduction, the inner combustion liner is made of copper. The performance of a standard coating system for nickel based substrates is investigated on copper substrates. Thermal cycling experiments are performed on the coated samples. Due to temperature limitations of the copper substrate material, no thermally grown oxide forms at the interface of the thermal barrier coating and the bond coat. Delamination of the coatings occurs at the interface between the substrate and the bond coat due to oxide formation of the copper at uncoated edges. In real service a totally dense coating can probably not be assured which is the reason why this failure mode is of importance. Different parameters are used for thermal cycling to understand the underlying mechanisms of delamination. Furthermore, laser heating experiments account for the high thermal gradient in real service. Pilot tests which led to a delamination of the coating at the substrate interface were performed successfully.

Interfacial Kinetics of High Temperature Oxidation in YSZ Thermal Barrier Coatings With Bond Coatings of NiCoCrAlY With 0.25% Hf

2009 ◽  
Author(s):  
Winston Soboyejo ◽  
Patrick Mensah ◽  
Ravinder Diwan
Keyword(s):  
High Temperature ◽  
Thermal Barrier Coatings ◽  
High Temperature Oxidation ◽  
Structural Evolution ◽  
Isothermal Oxidation ◽  
Thermally Grown Oxide ◽  
Thermal Barrier ◽  
Temperature Oxidation ◽  
Barrier Coatings ◽  
Thermally Grown

This paper presents the results of an experimental study of the high-temperature isothermal oxidation behavior and micro-structural evolution in plasma sprayed thermal barrier coatings (TBCs) at temperatures between 900 and 1200 °C. Two types of specimens were produced for testing. These include a standard and vertically cracked (VC) APS. High temperature oxidation has been carried out at 900, 1000, 1100 and 1200 °C. The experiments have been performed in air under isothermal conditions. At each temperature, the specimens are exposed for 25, 50, 75 and 100 hours. The corresponding microstructures and microchemistries of the TBC layers are then examined using scanning electron microscopy (SEM) and energy dispersive x-ray spectroscopy EDS. Changes in the dimensions of the thermally grown oxide (TGO) layer are determined as functions of time and temperature. The evolution of bond coat microstructures/interdiffusion zones and thermally grown oxide (TGO) layers are compared in TBCs with standard (STD) and vertically cracked (VC) microstructures.

Fundamental Coating Development Study to Improve the Isothermal Oxidation Resistance and Thermal Cycle Durability of Thermal Barrier Coatings

2006 ◽  
Vol 522-523 ◽  
pp. 247-254 ◽  
Author(s):  
Taiji Torigoe ◽  
Hidetaka Oguma ◽  
Ikuo Okada ◽  
Guo Chun Xu ◽  
Kazuhisa Fujita ◽  
...  
Keyword(s):  
High Temperature ◽  
Thermal Barrier Coatings ◽  
Gas Turbines ◽  
Turbine Blades ◽  
Atmospheric Plasma ◽  
Zirconia Ceramic ◽  
Thermal Barrier ◽  
Temperature Oxidation ◽  
Barrier Coatings ◽  
Oxidation Properties

Thermal barrier coatings(TBCs) are used in high temperature gas turbines to reduce the surface temperature of cooled metal parts such as turbine blades[1]. TBC consist of a bondcoat (e.g. MCrAlY where M is Co, Ni, CoNi, etc.) and a partially stabilized zirconia ceramic topcoat. Usually, the MCrAlY bondcoat is applied by LPPS (low pressure plasma spray) or HVOF(high velocity oxi-fuel spray). The topcoat is applied by APS (atmospheric plasma splay) or EB-PVD (electron beam-physical vapor deposition). High temperature oxidation properties, thermal barrier properties and durability of TBC are very important to increase the reliability in high temperature service. In this study, new TBC has been investigated. The new TBC consists of a two-layered bondcoat (LPPS-MCrAlY plus dense PVD overlay MCrAlY) and the EB-PVD type YSZ columnar structure topcoat. As a result of evaluation tests, it was confirmed that the new TBC had better oxidation properties and durability than a conventional TBC system.

Sign in / Sign up

Export Citation Format

Share Document