Research on Integrated System of Information and Function Based on Virtual Prototyping Technology

2008 ◽  
Vol 392-394 ◽  
pp. 884-890 ◽  
Author(s):  
Bingbing Yan ◽  
Fu Jun Ren ◽  
Y.C. Jiang
Keyword(s):  
Design Thinking ◽  
Virtual Prototyping ◽  
Virtual Prototype ◽  
Heterogeneous Data ◽  
Integrated System ◽  
Product Development Process ◽  
Complex Product ◽  
Component Object ◽  
Virtual Prototyping Technology ◽  
And Function

Virtual prototyping technology as a key technology for agile manufacturing can deal with multidisciplinary knowledge across different fields. In the complex product development process, the exchange between heterogeneous data in heterogeneous environment is a universal problem encountered, which increases the complexity of collaborative parallel design of virtual prototype. Taking the product models as carriers and the different function requirements as clues, the knowledge structure and expression of product information in various fields was studied. By adopting component object model technology, direct geometry access technology, behavioural modeling technology and parametric design thinking, the interaction among tools in various function units was realized, and the effective integration of information and function in multi-fields was accomplished, the parameter-driven virtual prototype architecture of complex product based on the integration of information and function was created. The feasibility of this architecture has been verified by the actual engineering. This plan provides an effective way to carry out virtual prototype projects for enterprise.

Study on the Application of Virtual Prototyping Technology to UAV Fault Diagnosis Training

2013 ◽  
Vol 347-350 ◽  
pp. 396-400
Author(s):  
Yong Kang Jiao ◽  
Xiao Min Li
Keyword(s):  
Fault Diagnosis ◽  
Design Thinking ◽  
Virtual Prototyping ◽  
Third Party ◽  
Appearance Model ◽  
Mechanism Model ◽  
Modeling Software ◽  
Virtual Prototyping Technology ◽  
Performance Capability ◽  
And Training

In accordance with the characteristic that UAV equipment is hard to realize the real fault diagnosis training, a design scheme of fault diagnosis training based on virtual prototyping is presented. The training-oriented virtual prototyping model is decomposed into two parts, appearance model and mechanism model. The design thinking and training flow of fault diagnosis training are given, and two different kinds of training modes are used to make the training much more targeted. In the end, Virtools and third-party modeling software are adopted to build the virtual environment, the verification of UAV ground control station achieves the purpose of enhancing the performance capability of maintenance man.

Modeling and Kinematics Simulation of Shearer’s Travelling Mechanism Based on Virtual Prototyping Technology

2013 ◽  
Vol 655-657 ◽  
pp. 396-399 ◽  
Author(s):  
Dan Zhang ◽  
Sheng Hai Hu ◽  
Chun Sheng Liu ◽  
Xun Tao Liu
Keyword(s):  
Angular Velocity ◽  
Dynamic Simulation ◽  
Basic Principle ◽  
Structural Design ◽  
Simulation Analysis ◽  
Virtual Prototyping ◽  
Virtual Prototype ◽  
Kinematics Simulation ◽  
Virtual Prototyping Technology

According to the basic principle of the shearer’s travelling mechanism to build the virtual prototype based on UG and ADAMS, and then carry out kinematics simulation of this virtual prototype .The error of angular velocity of every level transmission between virtual prototype and theoretic values . The results can be taken as the guideline for future structural design and dynamic simulation analysis.

The Dynamic Simulation of Vertical Planetary Wheel Sand Reclamation Equipment Based on ADAMS

2013 ◽  
Vol 397-400 ◽  
pp. 311-314 ◽  
Author(s):  
Shan Li ◽  
Yu Qi Wang ◽  
Yun Hua Zhang ◽  
Guan Yu Liu
Keyword(s):  
Dynamic Simulation ◽  
Reference Price ◽  
Virtual Prototyping ◽  
Virtual Prototype ◽  
Planetary Mill ◽  
Grinding Wheel ◽  
Combined Effects ◽  
Virtual Prototyping Technology

Vertical planetary mill is a kind of efficient grinding equipment. Due to its unique design, the materials can suffer combined effects of squeezing, shearing and grinding. this paper developed the virtual prototype of vertical planetary grinding wheel sand reclamation equipment based on virtual prototyping technology, and did the dynamic simulation with this virtual prototype. It will use ADAMS to do the dynamic simulation, and it can provide reference price for staff.

Study on Dynamic Performance of Tower Crane Based on ADAMS Multi-Flexible-Body

2012 ◽  
Vol 479-481 ◽  
pp. 1504-1509
Author(s):  
Chun Hua Zhao ◽  
Shi Jun Chen ◽  
Jin Zhang ◽  
Xian You Zhong ◽  
Nu Yan
Keyword(s):  
Fault Diagnosis ◽  
Natural Environment ◽  
Dynamic Performance ◽  
Virtual Prototyping ◽  
Virtual Prototype ◽  
System Level ◽  
Flexible Body ◽  
Tower Crane ◽  
Body Model ◽  
Virtual Prototyping Technology

When working, tower crane is affected by natural environment and is subjected to complex various loads. So it is not very easy to analyze its dynamic performance at system level. Some researchers have done some work as to simulation and analysis of tower crane, in order to study its dynamic performance. While much of their work based on grid body model but not flexible body model. This paper used SolidWorks and ADAMS to build the virtual prototype of a tower crane based on ADAMS flexible body. After the co-simulation, which joined ADAMS with SolidWorks, force of the connection between tower crane base and the strengthened section of the crane was recorded and analyzed. And so was the acceleration of the tower crane’s lifting rig. Succeeding in the application of Virtual Prototyping Technology based on ADAMS flexible body, this study can be used to direct the work, operation and fault diagnosis of tower crane, and lay a basis for further studies.

Virtual Prototype Modeling and Dynamic Simulation for a Large Pendulum

2012 ◽  
Vol 605-607 ◽  
pp. 1190-1193
Author(s):  
Wei Ming Lin ◽  
Yong Zhang ◽  
Hui Yu Xiang ◽  
Bao An Han
Keyword(s):  
Dynamic Simulation ◽  
Structure Analysis ◽  
Virtual Prototyping ◽  
Security Analysis ◽  
Virtual Prototype ◽  
Operation Conditions ◽  
Simulation Based ◽  
Virtual Prototyping Technology ◽  
Virtual Modeling ◽  
Reliable Basis

The large pendulum is a new kind of amusement devices. Virtual modeling and dynamic simulation based on virtual prototyping technology have been done for the structure analysis of the large pendulum. The speed, acceleration and load curves for each component on the large pendulum under different operation conditions have been acquired, which provides a reliable basis for further strength and security analysis. The result shows that the virtual prototype and dynamic simulation is an effective way to enhance the design reliability of the large pendulum.

An Approach to Integrated Product/Process Design via Virtual Prototyping

1997 ◽  
Author(s):  
Matthew D. Bauer ◽  
David W. Rosen
Keyword(s):  
Process Design ◽  
Optimization Problem ◽  
Development Process ◽  
Virtual Prototyping ◽  
Virtual Prototype ◽  
Process Models ◽  
Product Development Process ◽  
Product Model ◽  
Design Problems ◽  
Virtual Prototypes

Abstract With the introduction of virtual prototyping into the product development process, simultaneous product/process design is enabled. The research reported in this paper illustrates an integration of product and disassembly process design via virtual prototyping. In this context, a virtual prototype is an information model consisting of a product model and one or more process models. Virtual prototype generation is a hybrid process consisting of both automated and interactive tasks. Simultaneous product/process design is accomplished by formulating the integrated product/process design problem as a multiobjective optimization problem in which product/process requirements are evaluated via virtual prototyping. Solution of the integrated product/process design problems is achieved through the application of the MORPS algorithm. Application of the use of virtual prototypes is presented in the simultaneous product/process design of an automotive center console.

A Component-Based Meta Modeling Framework for Complex Product Virtual Prototype

2011 ◽  
Vol 346 ◽  
pp. 346-352 ◽  
Author(s):  
Tan Li ◽  
Ting Yu Lin ◽  
Xu Dong Chai ◽  
Bao Cun Hou
Keyword(s):  
Virtual Prototyping ◽  
Virtual Prototype ◽  
System Level ◽  
Modeling Framework ◽  
Complex Product ◽  
Cap Model ◽  
Meta Modeling ◽  
Level Model ◽  
High Level ◽  
Component Models

Effective reuse and integration of multidiscipline model resources is a key issue and challenge in the Virtual Prototyping for Complex Products. Based on the Meta Object Facility and Component-based Modeling, This paper proposes a new component-based Meta Modeling Framework (M2F) of Complex Product Virtual Prototyping as a solution, providing the model specifications for each abstract layer (CAP model, CIM model and High-level model) in the framework. M2F enables multi-layered abstraction of those isomerism models in Complex Product Virtual Prototype and facilitates the unified modeling, reuse and integration of models. A case study about typical complex product indicates this approach not only makes the system-level modeling of virtual prototype easy, but also improves the reusability of component models. At the end of this paper, conclusion and future works are given.

Dynamic Properties of Hydraulic Excavator’s Simulation and Analysis Based on ADAMS

2011 ◽  
Vol 55-57 ◽  
pp. 1905-1909
Author(s):  
Chun Hua Zhao ◽  
Shi Jun Chen ◽  
Xian You Zhong ◽  
Mei Yun Zhao ◽  
Zhong Qi Tan
Keyword(s):  
Dynamic Properties ◽  
Virtual Prototyping ◽  
Virtual Prototype ◽  
Hydraulic Excavator ◽  
Virtual Prototyping Technology

This paper used Pro/E and ADAMS to build the virtual prototype of a hydraulic excavator. After the co-simulation, which joined ADAMS with Pro/E, forces of the bucket’s joints were recorded. This study succeeded in the application of Virtual Prototyping Technology and laid a basis for further studies of the excavator.

Virtual Prototyping: An Approach Using VR-Techniques

1994 ◽  
Author(s):  
Fan Dai ◽  
Martin Göbel
Keyword(s):  
Computer Simulation ◽  
Data Model ◽  
Development Process ◽  
Virtual Prototyping ◽  
Virtual Prototype ◽  
Product Development Process ◽  
Product Modelling ◽  
Key Factor ◽  
Product Data Model ◽  
Realistic Visualization

Abstract Rapid prototyping is becoming a key factor in speeding up the product development process. This paper presents a concept of electronic prototyping called virtual prototyping. The idea is to integrate product modelling with computer simulation, realistic visualization and virtual reality techniques to make the product data model a virtual prototype. In contrast to physical prototypes, a virtual prototype is made very fast, can be manipulated and modified directly and the data is reusable. A preliminary implementation of our concept is available at IGD.

Sign in / Sign up

Export Citation Format

Share Document