Ultra High Performance Fiber Reinforced Concrete Behavior under Static and High Velocity Impact

2016 ◽  
Vol 711 ◽  
pp. 171-178 ◽  
Author(s):  
Christophe Pontiroli ◽  
Benjamin Erzar ◽  
Eric Buzaud

To evaluate the vulnerability of ultra-high performance fiber reinforced concrete (UHPFRC) infrastructure to rigid projectile penetration, CEA-Gramat has led since few years an experimental and numerical research program in collaboration with French universities. During the penetration process, concrete is subjected to extreme conditions of pressure and strain-rate. Plasticity mechanisms as well as dynamic tensile and/or shear damages are activated during the tunneling phase and the cratering of the concrete target. Each mechanism has been investigated independently at the laboratory scale and the role of steel fibers has been specially analyzed to understand their influence on the macroscopic behavior. In parallel, some improvements have been introduced into the concrete model developed by Pontiroli, Rouquand and Mazars (PRM model), especially to take into account the fibers contribution in the tensile fracture process. The capabilities of the PRM model have been illustrated by performing numerical simulations of material characterization experiments. Next step will be to assess the concrete model to simulate projectile penetration into UHPFRC concrete structures.

Author(s):  
Igor Chilin ◽  

Приведены результаты исследований и выполнена оценка влияния технологических факторов на реологические свойства самоуплотняющихся сталефибробетонных смесей, определены кратковременные и длительные физико-механические и деформативные характеристики сверхвысокопрочного сталефибробетона, включая определение его фактической морозостойкости.


Buildings ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 63
Author(s):  
Anna L. Mina ◽  
Michael F. Petrou ◽  
Konstantinos G. Trezos

The scope of this paper is to investigate the performance of ultra-high performance fiber reinforced concrete (UHPFRC) concrete slabs, under projectile impact. Mixture performance under impact loading was examined using bullets with 7.62 mm diameter and initial velocity 800 m/s. The UHPFRC, used in this study, consists of a combination of steel fibers of two lengths: 6 mm and 13 mm with the same diameter of 0.16 mm. Six composition mixtures were tested, four UHPFRC, one ultra-high performance concrete (UHPC), without steel fibers, and high strength concrete (HSC). Slabs with thicknesses of 15, 30, 50, and 70 mm were produced and subjected to real shotgun fire in the field. Penetration depth, material volume loss, and crater diameter were measured and analyzed. The test results show that the mixture with a combination of 3% 6 mm and 3% of 13 mm length of steel fibers exhibited the best resistance to projectile impact and only the slabs with 15 mm thickness had perforation. Empirical models that predict the depth of penetration were compared with the experimental results. This material can be used as an overlay to buildings or to construct small precast structures.


Sign in / Sign up

Export Citation Format

Share Document