Finite Element Analysis of the Effect of Particle Shape on the Thermal Conductivity in Diamond/Cu Composites

2014 ◽  
Vol 788 ◽  
pp. 689-692
Author(s):  
Hong Guo ◽  
Yuan Yuan Han ◽  
Xi Min Zhang ◽  
Fa Zhang Yin ◽  
Ye Ming Fan ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Finite Element Method ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Thermal Resistance ◽  
Particle Shape ◽  
Finite Element Calculation ◽  
Element Calculation ◽  
Element Analysis ◽  
Result Show

The effect of diamond shape on the thermal conductivity of diamond/Cu composites was studied by combine finite element method with the tests. The finite element result show that the thermal conductivity of the hexoctahedron diamond/Cu composites and the square diamond/Cu composites is 819 W/m·K and 1013 W/m·K respectively. And the testing results indicate that the thermal conductivity of the single hexoctahedron diamond/Cu composites and the hexoctahedron mixed with the square diamond/Cu composites is 659W/m·K and 720 W/m·K respectively. The testing results consist with the finite element calculation. Under the same circumstances, more {100} faces can bring in less overall thermal resistance in the composites thus improve the thermal conductivity of the composites. The results show that using square diamond particles helps to improve the thermal conductivity of diamond/Cu composites.

Finite Element Analysis of Tianerya Trench-Buried Inverted Siphon

2013 ◽  
Vol 804 ◽  
pp. 320-324
Author(s):  
Xiang Zan Xie
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Finite Element Calculation ◽  
Construction Process ◽  
Element Calculation ◽  
Element Analysis ◽  
Operational Process ◽  
Inverted Siphon ◽  
Calculation Results ◽  
Calculation Software

This paper adopts universal finite element calculation software to carry out finite element analysis for Tianerya trench-buried inverted siphon. Researching variation law of the inverted siphons stress and displacement in construction process and operational process. The calculation results further shown design schemes rationality and safety. The analysis results provide a certain reference for design of trench-buried inverted siphon structure.

The Study of ANSYS-Based Finite Element Calculation Model for Push-Back Rack

2013 ◽  
Vol 712-715 ◽  
pp. 1111-1115
Author(s):  
Bei Li ◽  
Zhuan Wang ◽  
Yi Li Wang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Calculation Model ◽  
Finite Element Calculation ◽  
Element Calculation ◽  
Element Analysis ◽  
Modeling And Analysis ◽  
The Finite Element Analysis ◽  
Load Characteristics ◽  
Calculating Model

A kind of calculating model was proposed according to the structure and load characteristics of push-back rack. On the basis of study on modeling and analysis technology using ANSYS, the finite element analysis of push-back rack was realized, which can provide reference to the design and calculation of push-back rack.

Research on Finite Element Analysis of Nanping Inverted Siphon Engineering

2013 ◽  
Vol 394 ◽  
pp. 353-356
Author(s):  
Dongy Yu Ji
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Finite Element Calculation ◽  
Construction Process ◽  
Element Calculation ◽  
Force Analysis ◽  
Element Analysis ◽  
Inverted Siphon ◽  
Calculation Results ◽  
Calculation Software

This paper adopts universal finite element calculation software to carry out force analysis for Nanping trench-buried inverted siphon,computer is applied in analysis of trench-buried inverted siphon. Deducing variation law of the inverted siphons stress and displacement in construction process and operational process. The calculation results further shown design schemes rationality and safety. which provide reliable reference of design and construction for the trench-buried inverted siphon.

Experimental Study and Finite Element Analysis of Concrete Simple Supported Beams Strengthened with Externally Prestressed CFRP Tendons

2013 ◽  
Vol 405-408 ◽  
pp. 1017-1021
Author(s):  
Feng Xu ◽  
Le Huang
Keyword(s):  
Finite Element Analysis ◽  
Experimental Study ◽  
Finite Element ◽  
Engineering Application ◽  
Finite Element Calculation ◽  
Test Results ◽  
Element Calculation ◽  
Flexural Capacity ◽  
Element Analysis ◽  
Stress Changes

The concrete simple supported beams were strengthened by an innovative device mainly includes oblique screws and linear CFRP tendons. A static experimental study and finite element analysis were conducted to research the flexural capacity and stress changes of CFRP tendons of strengthened beams, and the contrastive analysis was explored between finite element calculation results and test results. The results indicate that the strengthen system can significantly improve the flexural capacity of concrete beams, there is basically a linear relationship between the stress increment of CFRP tendon and the deflection of midspan section, and the finite element calculation value is in agreement with the test results. Based on this, the stress of concrete near holes was analysed using finite element method (FEM), which can provide a reference for practical engineering application.

Finite Element Analysis of Woven Fabric Laminates Structural Strength

2013 ◽  
Vol 785-786 ◽  
pp. 199-203 ◽  
Author(s):  
Gang Tong ◽  
Tong Fei Liu
Keyword(s):  
Experimental Data ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Finite Element Model ◽  
Structural Strength ◽  
Element Model ◽  
Finite Element Calculation ◽  
Woven Fabric ◽  
Element Calculation ◽  
Element Analysis

The characteristics of the woven fabric laminates structure is described. The steps and method of building the woven fabric laminates structure finite element model in MSC Patran is provided. The accuracy of this method is verified by a group of finite element calculation and experimental data.

Tire Cornering Simulation Using an Explicit Finite Element Analysis Code

1998 ◽  
Vol 26 (2) ◽  
pp. 109-119 ◽  
Author(s):  
M. Koishi ◽  
K. Kabe ◽  
M. Shiratori
Keyword(s):  
Finite Element Method ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Test System ◽  
Experimental Results ◽  
The Finite Element Method ◽  
Element Analysis ◽  
Explicit Finite Element ◽  
Explicit Finite Element Analysis ◽  
Element Method

Abstract The finite element method has been used widely in tire engineering. Most tire simulations using the finite element method are static analyses, because tires are very complex nonlinear structures. Recently, transient phenomena have been studied with explicit finite element analysis codes. In this paper, the authors demonstrate the feasibility of tire cornering simulation using an explicit finite element code, PAM-SHOCK. First, we propose the cornering simulation using the explicit finite element analysis code. To demonstrate the efficiency of the proposed simulation, computed cornering forces for a 175SR14 tire are compared with experimental results from an MTS Flat-Trac Tire Test System. The computed cornering forces agree well with experimental results. After that, parametric studies are conducted by using the proposed simulation.

Finite Element Analysis of the Forging Process for Half-Shaft Bushing

2009 ◽  
Vol 16-19 ◽  
pp. 1248-1252
Author(s):  
Chun Dong Zhu ◽  
Man Chun Zhang ◽  
Lin Hua
Keyword(s):  
Finite Element Method ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Numerical Calculation ◽  
Two Dimensional ◽  
Element Analysis ◽  
Forging Process ◽  
Die Life ◽  
Dimensional Finite Element ◽  
Forging Force

As an important forged part of an automobile, the inner hole of the half-shaft bushing must be formed directly. However, the process requires many steps, and how the forging, or deformation, is spread over the production steps directly affects the die life and forging force required. In this paper, the three steps involved in directly forging a half shaft bushing's inner hole are simulated using the two-dimensional finite element method. Further more, we improve the forging process. From numerical calculation, the improved necessary forging force is found to be only half the original force, and the die life is doubled.

Sign in / Sign up

Export Citation Format

Share Document