Analysis of Physical and Chemical Properties of XLPE Insulation for Long Term Running Cable

2018 ◽  
Vol 922 ◽  
pp. 186-191
Author(s):  
Tao Zhang ◽  
Shi Chao Nie ◽  
Ze Hua Pan ◽  
Zhi Wei Li ◽  
Nai Kui Gao ◽  
...  
Keyword(s):  
Mechanical Property ◽  
High Temperature ◽  
Chemical Properties ◽  
Insulation Material ◽  
Physical And Chemical Properties ◽  
Term Operation ◽  
Physical And Chemical ◽  
Xlpe Insulation ◽  
And Chemical Properties

High temperature caused by copper core would have a certain impact on the performance of XLPE insulation during the long running process of the cable. In this paper, the XLPE/PVC cable running for 17years was investigated by using thermal analysis, microstructure analysis, mechanical property analysis and dielectric properties analysis. The influences of long-term operation for the physical and chemical properties of cable insulation are analyzed by the performance of the insulation material. DSC results indicated that position of shoulder peak would characterize the thermal history of material and express the crystal size distribution of XLPE indirectly. Mechanical property test results showed that effect of long term high temperature would decrease the elongation at break and breaking strength of XLPE. SEM results showed that the effect of long term high temperature increased the average size of crystal and the distribution of the crystal became concentrated, meanwhile it verified the relevant conclusion of DSC.

Influence of Regeneration Condition on Physical and Chemical Properties of High Temperature Coal Gas Desulfurization Sorbent

2014 ◽  
Vol 521 ◽  
pp. 658-661
Author(s):  
Lei Yang ◽  
Shang Guan Ju ◽  
Yu Kun Gao ◽  
Yan Hui Hu
Keyword(s):  
High Temperature ◽  
Circulatory System ◽  
Chemical Properties ◽  
Space Velocity ◽  
Physical And Chemical Properties ◽  
Coal Gas ◽  
Regeneration Condition ◽  
Atmosphere Temperature ◽  
Physical And Chemical ◽  
And Chemical Properties

Physical and chemical properties are closely related to desulfurization, regeneration performance and cycle stability for high temperature coal gas desulfurizer. This review focuses on influence rules of changes in regeneration atmosphere, temperature and space velocity on physical and chemical properties. A large number of experimental researches have shown that regeneration atmosphere, regeneration temperature, space velocity have an important influence on mechanical strength, active component and texture change for high temperature coal gas desulfurizer. The different regeneration atmosphere obviously results in different active ingredients for desulfurization sorbent after regeneration, and regeneration at a higher regeneration temperature will easily cause desulfurizer sintering, as well as small regeneration space velocity can lead to the formation of sulfates. In order to make the circulatory system of sulfidation-regeneration-sulfidation need to the requirements in industrial application, the further research of influence rules of regeneration condition on physical and chemical properties will be crucial.

scholarly journals Tillage and no-tillage effects on physical and chemical properties of an Argiaquoll soil under long-term crop rotation in Buenos Aires, Argentina

2020 ◽  
Vol 8 (2) ◽  
pp. 185-194 ◽  
Author(s):  
Ana Clara Sokolowski ◽  
Barbara Prack McCormick ◽  
Javier De Grazia ◽  
José E. Wolski ◽  
Hernán A. Rodríguez ◽  
...  
Keyword(s):  
Crop Rotation ◽  
Buenos Aires ◽  
Chemical Properties ◽  
Physical And Chemical Properties ◽  
No Tillage ◽  
Physical And Chemical ◽  
And Chemical Properties

Sugarcane Biochar for Agricultural Use Produced in Different Conditions of Pyrolysis

2019 ◽  
pp. 1-8
Author(s):  
Juliany Barbosa de Pinho ◽  
Aloisio Bianchini ◽  
Pedro Silvério Xavier Pereira ◽  
Letycia Cunha Nunes ◽  
Rodrigo Fernandes Daros ◽  
...  
Keyword(s):  
Chemical Properties ◽  
Exchange Capacity ◽  
Raw Material ◽  
Physical And Chemical Properties ◽  
Oxidizing Atmosphere ◽  
Different Temperatures ◽  
Agricultural Use ◽  
Physical And Chemical ◽  
And Chemical Properties

From the pyrolysis process, biochar is a carbon rich and recalcitrant organic material with potential for long term carbon sequestration because of its aromatic structure. However, the physical and chemical properties of the biochar vary due to the diversity of raw material and the conditions of production. The present study aimed to evaluate the biochar from the sugarcane bagasse at different temperatures and under two conditions of pyrolysis. The biochar was produced at two final temperatures 200°C (1 hour); 250°C (1h) and 250°C (2h), with pyrolysis of an oxidizing and non-oxidizing atmosphere for both. PH, cation exchange capacity (CTC), carbon content (C), Nitrogen (N), hydrogen (H), H:C, C:N and ash ratios were evaluated. The contents of C, H, N and the atomic ratios H:C and C:N were higher in Biochar produced in a non-oxidizing atmosphere (BNO). However, the content of ash, pH and CTC were higher in Biochar produced in oxidizing atmospheres (BO). One can conclude the direct influence of the pyrolysis condition.

scholarly journals THE EFFECT OF LONG-TERM INTAKE OF ATORVASTATIN AND 1-CHOLECALCIFEROL ON THE PHYSICAL AND CHEMICAL PROPERTIES OF LIPOPROTEIN BLOOD COMPLEXES OF LABORATORY RATS

2017 ◽  
pp. 49-52
Author(s):  
S. S. Osuchuk ◽  
O. S. Yakovleva
Keyword(s):  
Chemical Properties ◽  
Intragastric Administration ◽  
Physical And Chemical Properties ◽  
Laboratory Rats ◽  
Combined Application ◽  
Term Administration ◽  
Physical And Chemical ◽  
Positive Effect ◽  
And Chemical Properties

Object: to study the physical and chemical properties of the lipoprotein complexes of rats` blood in the long-term administration of statins and vitamin D. Material and methods. The experiment was performed on 4 experimental groups of rats for 90 days: 1 - intact; 2 - placebo; 3 - intragastric administration of atorvastatin; 4 - intragastric administration of atorvastatin with α-calcidol. The lipoprotein blood complexes were isolated by the method of differential ultracentrifugation. The microflow and microviscosity of the lipoprotein complexes were determined using pyrene. Results. The placebo group revealed an increase of the micropolarity of the total lipid pool of VLDL and a decrease of the microviscosity of the annulary pool of LDL and HDL. The administration of atorvastatin reduces the microviscosity of HDL. The combined application of atorvastatin and α-calcidol reduces the microviscosity of HDL. Conclusion. We have drawn a conclusion about the complex effect of stress, atorvastatin, and α-calcidol on the physical and chemical properties of the lipoprotein blood complexes and a conclusion about the positive effect of atorvastatin and α-calcidol on the microviscosity of HDL.

Radiation Damage in Materials – Effects of Disorder

2009 ◽  
Vol 1193 ◽  
Author(s):  
Karl R. Whittle ◽  
Mark G. Blackford ◽  
Gregory R. Lumpkin ◽  
Katherine L. Smith ◽  
Nestor J. Zaluze
Keyword(s):  
Critical Temperature ◽  
Radiation Damage ◽  
Chemical Properties ◽  
Waste Form ◽  
Physical And Chemical Properties ◽  
Long Term Stability ◽  
Effects Of Disorder ◽  
Physical And Chemical ◽  
And Chemical Properties

AbstractRadiation damage and the effect on physical and chemical properties is an important component in the prediction of the long-term stability of waste form materials. As part of the ongoing goal of increasing the accuracy of long-term predictions of radiation damage, two types of material, based on proposed materials with a waste form application have been irradiated. Results have shown that Y2TiO5 (Y2.67Ti1.33O6.67), and Yb2TiO5 (Yb2.67Ti1.33O6.67), both of which are non-stoichiometric, disordered pyrochlore-based compounds, behave significantly different to the stoichiometric, ordered pyrochlore equivalent. For example the critical temperature, the temperature above which materials remain crystalline during irradiation, is found to decrease from the ordered equivalents, e.g. Y2Ti2O7. ⁡ A second material based on La2TiO5 has been found to behave differently to both La2/3TiO3 and La2Ti2O7, with a change in Tc of ∼ 200 K.

Sign in / Sign up

Export Citation Format

Share Document