scholarly journals Comparing Sentinel-1, Sentinel-2, and Landsat-8 data in the early recognition of irrigated areas in central Italy

2021 ◽  
Vol 52 (4) ◽  
Author(s):  
Lorenzo Vergni ◽  
Alessandra Vinci ◽  
Francesca Todisco ◽  
Francesco Saverio Santaga ◽  
Marco Vizzari
Keyword(s):  
Remote Sensing ◽  
Random Forest ◽  
Early Recognition ◽  
Central Italy ◽  
Climatic Conditions ◽  
Data Sources ◽  
Landsat 8 ◽  
Irrigation Season ◽  
Precipitation Data ◽  
Sentinel 2

This study evaluated the effectiveness of various remote sensing (RS) data (Sentinel-1, Sentinel-2, and Landsat 8) in the early recognition of irrigated areas in a densely cultivated area of central Italy. The study was based on crop data collected on more than 2000 plots in 2016 and 2017, characterized by quite different climatic conditions. The different RS data sources were used both alone and combined and with precipitation to define corresponding random forest (RF) classifiers whose overall accuracy (OA) was assessed by gradually increasing the number of available features from the beginning of the irrigation season. All tested RF classifiers reach stable OAs (OA 0.9) after 7-8 weeks from the start of the irrigation season. The performance of the radar indexes slightly improves when used in combination with precipitation data, but three weeks of features are required to obtain OA above 80%. The optical indices alone (Sentinel-2 and Landsat 8) reach OA ≈85% in the first week of observation. However, they are ineffective in cloudy conditions or when rainfed and irrigated fields have similar vigour. The most effective and robust indices are those based on combined sources (radar, optical, and meteorological), allowing OAs of about 92% and 96% at the beginning and in the middle of the irrigation season, respectively.

scholarly journals Comparison of Machine Learning Algorithms for Wildland-Urban Interface Fuelbreak Planning Integrating ALS and UAV-Borne LiDAR Data and Multispectral Images

Drones ◽  
2020 ◽  
Vol 4 (2) ◽  
pp. 21 ◽  
Author(s):  
Francisco Rodríguez-Puerta ◽  
Rafael Alonso Ponce ◽  
Fernando Pérez-Rodríguez ◽  
Beatriz Águeda ◽  
Saray Martín-García ◽  
...  
Keyword(s):  
Machine Learning ◽  
Remote Sensing ◽  
Random Forest ◽  
Learning Algorithms ◽  
Remote Sensing Data ◽  
Machine Learning Algorithms ◽  
Data Sources ◽  
Lidar Data ◽  
Sensing Data ◽  
Sentinel 2

Controlling vegetation fuels around human settlements is a crucial strategy for reducing fire severity in forests, buildings and infrastructure, as well as protecting human lives. Each country has its own regulations in this respect, but they all have in common that by reducing fuel load, we in turn reduce the intensity and severity of the fire. The use of Unmanned Aerial Vehicles (UAV)-acquired data combined with other passive and active remote sensing data has the greatest performance to planning Wildland-Urban Interface (WUI) fuelbreak through machine learning algorithms. Nine remote sensing data sources (active and passive) and four supervised classification algorithms (Random Forest, Linear and Radial Support Vector Machine and Artificial Neural Networks) were tested to classify five fuel-area types. We used very high-density Light Detection and Ranging (LiDAR) data acquired by UAV (154 returns·m−2 and ortho-mosaic of 5-cm pixel), multispectral data from the satellites Pleiades-1B and Sentinel-2, and low-density LiDAR data acquired by Airborne Laser Scanning (ALS) (0.5 returns·m−2, ortho-mosaic of 25 cm pixels). Through the Variable Selection Using Random Forest (VSURF) procedure, a pre-selection of final variables was carried out to train the model. The four algorithms were compared, and it was concluded that the differences among them in overall accuracy (OA) on training datasets were negligible. Although the highest accuracy in the training step was obtained in SVML (OA=94.46%) and in testing in ANN (OA=91.91%), Random Forest was considered to be the most reliable algorithm, since it produced more consistent predictions due to the smaller differences between training and testing performance. Using a combination of Sentinel-2 and the two LiDAR data (UAV and ALS), Random Forest obtained an OA of 90.66% in training and of 91.80% in testing datasets. The differences in accuracy between the data sources used are much greater than between algorithms. LiDAR growth metrics calculated using point clouds in different dates and multispectral information from different seasons of the year are the most important variables in the classification. Our results support the essential role of UAVs in fuelbreak planning and management and thus, in the prevention of forest fires.

Landscape Change in the Steppe of Algeria South-West Using Remote Sensing

2018 ◽  
Vol 18 (1) ◽  
pp. 41-52
Author(s):  
Tayeb Sitayeb ◽  
Ishak Belabbes
Keyword(s):  
Remote Sensing ◽  
Social Systems ◽  
Bare Soil ◽  
Climatic Conditions ◽  
Landscape Dynamics ◽  
Landsat 8 ◽  
Natural Ecosystems ◽  
Stipa Tenacissima ◽  
Steppe Species ◽  
Sparse Vegetation

Abstract Landscape dynamics is the result of interactions between social systems and the environment, these systems evolving significantly over time. climatic conditions and biophysical phenomena are the main factors of landscape dynamics. Also, currently man is responsible for most changes affecting natural ecosystems. The objective of this work is to study the dynamics of a typical landscape of western Algeria in time and space, and to map the distribution of vegetation groups constitute the vegetation cover of this ecosystem. as well as using a method of monitoring the state of a fragile ecosystem by remote sensing to understand the processes of changes in this area. The steppe constitutes a large arid area, with little relief, covered with low and sparse vegetation. it lies between the annual isohyets of 100 to 400 mm, subjected to a very old human exploitation with an activity of extensive breeding of sheep, goats, and camels. Landsat satellite data were used to mapping vegetation groups in the Mecheria Steppe at a scale of 1: 300,000. Then, a comparison was made between the two maps obtained by a classification of Landsat-8 sensor Operational Land Imager (OLI) acquired on March 18, 2014, and Landsat-5 sensor Thematic Mapper (TM) acquired on April 25, 1987. The results obtained show the main changes affecting the natural distribution of steppe species, a strong change in land occupied by the Stipa tenacissima steppe with 65% of change, this steppe is replaced by Thymelaea microphylla, Salsola vermiculata, lygeum spartum and Peganum harmala steppe. an absence from the steppe Artemisia herba-alba that has also been replaced by the same previous steppes species. The groups with Quercus ilex and Juniperus phoenicea are characterized by a strong regression that was lost 60% of its global surface and transformed by steppe to stipa tenacissima and bare soil.

Random Forest (RF) and Artificial Neural Network (ANN) Algorithms for LULC Mapping

2020 ◽  
Vol 38 (4A) ◽  
pp. 510-514
Author(s):  
Tay H. Shihab ◽  
Amjed N. Al-Hameedawi ◽  
Ammar M. Hamza
Keyword(s):  
Neural Network ◽  
Remote Sensing ◽  
Artificial Neural Network ◽  
Random Forest ◽  
Satellite Image ◽  
Landsat 8 ◽  
Optical Remote Sensing ◽  
Data Set ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

In this paper to make use of complementary potential in the mapping of LULC spatial data is acquired from LandSat 8 OLI sensor images are taken in 2019.  They have been rectified, enhanced and then classified according to Random forest (RF) and artificial neural network (ANN) methods. Optical remote sensing images have been used to get information on the status of LULC classification, and extraction details. The classification of both satellite image types is used to extract features and to analyse LULC of the study area. The results of the classification showed that the artificial neural network method outperforms the random forest method. The required image processing has been made for Optical Remote Sensing Data to be used in LULC mapping, include the geometric correction, Image Enhancements, The overall accuracy when using the ANN methods 0.91 and the kappa accuracy was found 0.89 for the training data set. While the overall accuracy and the kappa accuracy of the test dataset were found 0.89 and 0.87 respectively.

scholarly journals STUDY ON REMOTE SENSING MONITORING MODEL OF AGRICULTURAL DROUGHT BASED ON RANDOM FOREST DEVIATION CORRECTION

2021 ◽  
pp. 413-422
Author(s):  
Shao Li ◽  
Xia Xu
Keyword(s):  
Remote Sensing ◽  
Random Forest ◽  
Remote Sensing Data ◽  
Agricultural Drought ◽  
Data Sources ◽  
Drought Monitoring ◽  
Monitoring Methods ◽  
Large Area ◽  
Sensing Data ◽  
Monitoring Model

Using remote sensing data to monitor large area drought is one of the important methods of drought monitoring at present. However, the traditional remote sensing drought monitoring methods mainly focus on monitoring single drought response factors such as soil moisture or vegetation status, and the research on comprehensive multi-factor drought monitoring is limited. In order to improve the ability to resist drought events, this paper takes Henan Province of China as an example, takes multi-source remote sensing data as data sources, considers various disaster-causing factors, adopts random forest method to model, and explores the method of regional remote sensing comprehensive drought monitoring using various remote sensing data sources. Compared with neural network, classification regression tree and linear regression, the performance of random forest is more stable and tolerant to noise and outliers. In order to provide a new method for comprehensive assessment of regional drought, a comprehensive drought monitoring model was established based on multi-source remote sensing data, which comprehensively considered the drought factors such as soil water stress, vegetation growth status and meteorological precipitation profit and loss in the process of drought occurrence and development.

In-season crop classification using optical remote sensing with random forest over irrigated agricultural fields in Australia

2021 ◽  
Author(s):  
Zitian Gao ◽  
Danlu Guo ◽  
Dongryeol Ryu ◽  
Andrew Western
Keyword(s):  
Random Forest ◽  
Water Use ◽  
Landsat 8 ◽  
Irrigation Season ◽  
Yield Estimation ◽  
Cropping Season ◽  
Crop Type ◽  
Eastern Australia ◽  
Crop Classification ◽  
Type Classification

<p>Timely classification of crop types is critical for agronomic planning in water use and crop production. However, crop type mapping is typically undertaken only after the cropping season, which precludes its uses in later-season water use planning and yield estimation. This study aims 1) to understand how the accuracy of crop type classification changes within cropping season and 2) to suggest the earliest time that it is possible to achieve reliable crop classification. We focused on three main summer crops (corn/maize, cotton and rice) in the Coleambally Irrigation Area (CIA), a major irrigation district in south-eastern Australia consisting of over 4000 fields, for the period of 2013 to 2019. The summer irrigation season in the CIA is from mid-August to mid-May and most farms use surface irrigation to support the growth of summer crops. We developed models that combine satellite data and farmer-reported information for in-season crop type classification. Monthly-averaged Landsat spectral bands were used as input to Random Forest algorithm. We developed multiple models trained with data initially available at the start of the cropping season, then later using all the antecedent images up to different stages within the season. We evaluated the model performance and uncertainty using a two-fold cross validation by randomly choosing training vs. validation periods. Results show that the classification accuracy increases rapidly during the first three months followed by a marginal improvement afterwards. Crops can be classified with a User’s accuracy above 70% based on the first 2-3 months after the start of the season. Cotton and rice have higher in-season accuracy than corn/maize. The resulting crop maps can be used to support activities such as later-season system scale irrigation decision-making or yield estimation at a regional scale.</p><p>Keywords: Landsat 8 OLI, in-season, multi-year, crop type, Random Forest</p>

scholarly journals Retrieving Total and Inorganic Suspended Sediments in Amazon Floodplain Lakes: A Multisensor Approach

2019 ◽  
Vol 11 (15) ◽  
pp. 1744 ◽  
Author(s):  
Daniel Maciel ◽  
Evlyn Novo ◽  
Lino Sander de Carvalho ◽  
Cláudio Barbosa ◽  
Rogério Flores Júnior ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Atmospheric Correction ◽  
Suspended Sediments ◽  
Floodplain Lakes ◽  
Empirical Modeling ◽  
Landsat 8 ◽  
Amazon Floodplain ◽  
The Impact ◽  
Sentinel 2

Remote sensing imagery are fundamental to increasing the knowledge about sediment dynamics in the middle-lower Amazon floodplains. Moreover, they can help to understand both how climate change and how land use and land cover changes impact the sediment exchange between the Amazon River and floodplain lakes in this important and complex ecosystem. This study investigates the suitability of Landsat-8 and Sentinel-2 spectral characteristics in retrieving total (TSS) and inorganic (TSI) suspended sediments on a set of Amazon floodplain lakes in the middle-lower Amazon basin using in situ Remote Sensing Reflectance (Rrs) measurements to simulate Landsat 8/OLI (Operational Land Imager) and Sentinel 2/MSI (Multispectral Instrument) bands and to calibrate/validate several TSS and TSI empirical algorithms. The calibration was based on the Monte Carlo Simulation carried out for the following datasets: (1) All-Dataset, consisting of all the data acquired during four field campaigns at five lakes spread over the lower Amazon floodplain (n = 94); (2) Campaign-Dataset including samples acquired in a specific hydrograph phase (season) in all lakes. As sample size varied from one season to the other, n varied from 18 to 31; (3) Lake-Dataset including samples acquired in all seasons at a given lake with n also varying from 17 to 67 for each lake. The calibrated models were, then, applied to OLI and MSI scenes acquired in August 2017. The performance of three atmospheric correction algorithms was also assessed for both OLI (6S, ACOLITE, and L8SR) and MSI (6S, ACOLITE, and Sen2Cor) images. The impact of glint correction on atmosphere-corrected image performance was assessed against in situ glint-corrected Rrs measurements. After glint correction, the L8SR and 6S atmospheric correction performed better with the OLI and MSI sensors, respectively (Mean Absolute Percentage Error (MAPE) = 16.68% and 14.38%) considering the entire set of bands. However, for a given single band, different methods have different performances. The validated TSI and TSS satellite estimates showed that both in situ TSI and TSS algorithms provided reliable estimates, having the best results for the green OLI band (561 nm) and MSI red-edge band (705 nm) (MAPE < 21%). Moreover, the findings indicate that the OLI and MSI models provided similar errors, which support the use of both sensors as a virtual constellation for the TSS and TSI estimate over an Amazon floodplain. These results demonstrate the applicability of the calibration/validation techniques developed for the empirical modeling of suspended sediments in lower Amazon floodplain lakes using medium-resolution sensors.

scholarly journals Synergistic Use of Radar Sentinel-1 and Optical Sentinel-2 Imagery for Crop Mapping: A Case Study for Belgium

2018 ◽  
Vol 10 (10) ◽  
pp. 1642 ◽  
Author(s):  
Kristof Van Tricht ◽  
Anne Gobin ◽  
Sven Gilliams ◽  
Isabelle Piccard
Keyword(s):  
Remote Sensing ◽  
Random Forest ◽  
Satellite Remote Sensing ◽  
Random Forest Classifier ◽  
Optical Observations ◽  
Optical Data ◽  
Crop Monitoring ◽  
Crop Types ◽  
Optical Imagery ◽  
Sentinel 2

A timely inventory of agricultural areas and crop types is an essential requirement for ensuring global food security and allowing early crop monitoring practices. Satellite remote sensing has proven to be an increasingly more reliable tool to identify crop types. With the Copernicus program and its Sentinel satellites, a growing source of satellite remote sensing data is publicly available at no charge. Here, we used joint Sentinel-1 radar and Sentinel-2 optical imagery to create a crop map for Belgium. To ensure homogenous radar and optical inputs across the country, Sentinel-1 12-day backscatter mosaics were created after incidence angle normalization, and Sentinel-2 normalized difference vegetation index (NDVI) images were smoothed to yield 10-daily cloud-free mosaics. An optimized random forest classifier predicted the eight crop types with a maximum accuracy of 82% and a kappa coefficient of 0.77. We found that a combination of radar and optical imagery always outperformed a classification based on single-sensor inputs, and that classification performance increased throughout the season until July, when differences between crop types were largest. Furthermore, we showed that the concept of classification confidence derived from the random forest classifier provided insight into the reliability of the predicted class for each pixel, clearly showing that parcel borders have a lower classification confidence. We concluded that the synergistic use of radar and optical data for crop classification led to richer information increasing classification accuracies compared to optical-only classification. Further work should focus on object-level classification and crop monitoring to exploit the rich potential of combined radar and optical observations.

scholarly journals Garlic and Winter Wheat Identification Based on Active and Passive Satellite Imagery and the Google Earth Engine in Northern China

2020 ◽  
Vol 12 (21) ◽  
pp. 3539
Author(s):  
Haifeng Tian ◽  
Jie Pei ◽  
Jianxi Huang ◽  
Xuecao Li ◽  
Jian Wang ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Winter Wheat ◽  
Satellite Imagery ◽  
Remote Sensing Data ◽  
Northern China ◽  
Google Earth ◽  
Kappa Coefficient ◽  
Landsat 8 ◽  
Winter Crops ◽  
Sentinel 2

Garlic and winter wheat are major economic and grain crops in China, and their boundaries have increased substantially in recent decades. Updated and accurate garlic and winter wheat maps are critical for assessing their impacts on society and the environment. Remote sensing imagery can be used to monitor spatial and temporal changes in croplands such as winter wheat and maize. However, to our knowledge, few studies are focusing on garlic area mapping. Here, we proposed a method for coupling active and passive satellite imagery for the identification of both garlic and winter wheat in Northern China. First, we used passive satellite imagery (Sentinel-2 and Landsat-8 images) to extract winter crops (garlic and winter wheat) with high accuracy. Second, we applied active satellite imagery (Sentinel-1 images) to distinguish garlic from winter wheat. Third, we generated a map of the garlic and winter wheat by coupling the above two classification results. For the evaluation of classification, the overall accuracy was 95.97%, with a kappa coefficient of 0.94 by eighteen validation quadrats (3 km by 3 km). The user’s and producer’s accuracies of garlic are 95.83% and 95.85%, respectively; and for the winter wheat, these two accuracies are 97.20% and 97.45%, respectively. This study provides a practical exploration of targeted crop identification in mixed planting areas using multisource remote sensing data.

scholarly journals Isolation Forests to Evaluate Class Separability and the Representativeness of Training and Validation Areas in Land Cover Classification

2019 ◽  
Vol 11 (24) ◽  
pp. 3000 ◽  
Author(s):  
Francisco Alonso-Sarria ◽  
Carmen Valdivieso-Ros ◽  
Francisco Gomariz-Castillo
Keyword(s):  
Remote Sensing ◽  
Random Forest ◽  
Land Cover ◽  
Classification Accuracy ◽  
Land Cover Classification ◽  
Landsat 8 ◽  
Commission Errors ◽  
Class Separability ◽  
Isolation Forest

Supervised land cover classification from remote sensing imagery is based on gathering a set of training areas to characterise each of the classes and to train a predictive model that is then used to predict land cover in the rest of the image. This procedure relies mainly on the assumptions of statistical separability of the classes and the representativeness of the training areas. This paper uses isolation forests, a type of random tree ensembles, to analyse both assumptions and to easily correct lack of representativeness by digitising new training areas where needed to improve the classification of a Landsat-8 set of images with Random Forest. The results show that the improved set of training areas after the isolation forest analysis is more representative of the whole image and increases classification accuracy. Besides, the distribution of isolation values can be useful to estimate class separability. A class separability parameter that summarises such distributions is proposed. This parameter is more correlated to omission and commission errors than other separability measures such as the Jeffries–Matusita distance.

Sign in / Sign up

Export Citation Format

Share Document