The market segment of additive manufacturing is showing an annual growth of more than ten percent, with extrusion-based processes being the larger segment of the market. The scope of use is limited to secondary structures. Equipment manufacturers try to guarantee constant material characteristics by closed systems. The characteristic values are up to 50% below the ones from injection molding. The processing of high-performance polymers with reinforcing fibers is an additional challenge. Further development requires an opening of the material and manufacturing systems. The guidelines and standardization for this are still missing. For this reason, a functional analysis (FA) according to TRIZ ("theory of the resolution of invention-related tasks") is performed within this study. This identifies the undesired functions and quantifies their coupling with process components and parameters. In the FA, the manufactured part is the target component in order to address its quality. This way the FA identifies five undesirable functions in the process. These are: deform, cool, weaken, swell and shape. For hightemperature thermoplastics, thermal shrinkage is the primary cause of geometric tolerance. Therefore, the deformation is largely dependent on the cooling mechanism. For a detailed analysis, the polymer melt is further disassembled. The results are six sub-components. The weakening is mainly due to the physical phase of the voids, which exists during the entire processing. The breakdown comprises physical fields such as stress, temperature and flow. These determine the output properties as well as the bonding between the layers. The associated functions are the swelling and shaping. In order to generate broadly applicable standardizations, research questions for further investigation are derived from this study.
Design and Manufacture of Optimized Continuous Composite Fiber Filament Using Additive Manufacturing Systems
