Mobile source emissions have already accounted for a large proportion of environmental pollution, which seriously affect the symmetric characteristics of atmosphere, and automobile emissions have extremely serious deterioration of emissions under transient operation, especially particulate emissions. These factors exacerbate the asymmetry of the environment. So, the paper reports an experiment about the improvement of post injection strategy on combustion, regulated emissions (HC, CO, and NOx), and particle number emissions especially the emissions of different size particles in the transient process of an EGR diesel engine, meanwhile, the effects of post injection on the combustion of mixture are further analyzed by numerical simulation method. The test speed was 1600 r/min, and the torque increased from 5% of the maximum torque to 100%. The results indicated that the shorter the instantaneous loading time, the more severe the deterioration of particulate emissions, HC and CO emissions, but loading time has little effect on NOx emissions. The particles with the size range of 50–100 nm, 23–50 nm, and >100 nm are greatly affected by the loading process and post injection. In comparison, it has little effect on ultrafine particles with particle size of 15–23 nm and <15 nm. With the amount of post injection increased, the in-cylinder disturbance increased, and the oxygen-rich area in cylinder increased, the particle number concentration first decreased and then slightly increased. When the amount of post injection fuel is 2 mg and the main-post injection interval is 2000 us, the effects of suppressing particulate emissions are the best, for the 50–100 nm and >100 nm particles, the peak number concentration can be reduced by 25% and 50%, respectively. Due to the turbo charging lag, the peak of NOx emissions during the unloading process were slightly larger than the loading process.
Increasing Exhaust Temperature of an Idling Light-Duty Diesel Engine through Post-Injection and Intake Throttling