Electrification and Automation of Manual Gearbox Technology to Reduce Fuel Consumption and CO2-Emissions of Passenger Cars

2019 ◽  
Author(s):  
Andre Uhle
2018 ◽  
Vol 197 ◽  
pp. 208-217 ◽  
Author(s):  
Robert Prinz ◽  
Raffaele Spinelli ◽  
Natascia Magagnotti ◽  
Johanna Routa ◽  
Antti Asikainen

2022 ◽  
Vol 14 (2) ◽  
pp. 103-110
Author(s):  
Olha Sakno ◽  
◽  
Ievgen Medvediev ◽  
Peter Eliseyev ◽  
Serhii Tsymbal ◽  
...  

Uncertainty of data during environmental monitoring prevents with confidently and objectively assessing the current condition of the environment, the influence of factors affecting the fuel consumption of vehicles during operation. In addition, it creates a serious problem in assessing the dynamics of this condition, especially when it comes to relatively small levels of pollution that are on the verge of the sensitivity of systems and devices in the car. It is precisely these tasks that include the determination of atmospheric pollution by emissions from road transport in conditions of variable weather and climatic conditions, carrying out routine maintenance, changing a configuration of an engine or transmission. The article discusses: a) factors related to the characteristics and vehicle systems, with the maintenance of vehicles. This category focuses on fuel consumption and CO2 emissions, which depend on the technical and operational characteristics of the vehicle, its weight and aerodynamics, tires and auxiliary systems, the quality and timeliness of maintenance and repairs; b) factors related to the environment and traffic conditions (weather conditions, road morphology and traffic conditions); c) factors related to a driver of a vehicle (driver qualifications, driving style). Optimization of factors related to vehicle systems and their characteristics has been performed; by using fuel of optimum quality and driving efficiently, you can achieve savings in fuel (financial) consumption and CO2 emissions. The article proposes the solution to a complex problem of managing the transport process while minimizing fuel consumption and CO2 emissions from passenger cars, depending on the road and climatic conditions and the driver's qualifications, based on the theory of fuzzy sets. This approach made it possible to largely compensate for the lack of objective information about the process due to its uncertainty by subjective expert data.


2013 ◽  
Vol 10 (2) ◽  
pp. 174-182

One efficient way to control the CO2 emissions from the transport sector is the replacement of gasoline passenger cars by Diesel ones, which emit less CO2. This can be more effective in Finland, where the Diesel penetration is only 13.6%, which is very low compared to the other member countries of the European Union. The benefit in CO2 emitted from the new passenger cars is studied in the case of an increased Diesel penetration in this country, after several scenarios using the current and estimated future passenger car registrations and the fuel consumption. The results show that, in the case of new passenger cars, a CO2 benefit of more than 2.6% can be achieved, if a Diesel penetration higher than 30% occurs in the case of the current fleet. If the penetration reaches 50%, this benefit reaches 5.9%. Future total CO2 emissions from transport sector will increase significantly and can be partially controlled by the introduction of Diesel passenger cars or the replacement of heavy passenger cars by lighter ones.


2018 ◽  
Author(s):  
Γεώργιος Τριανταφυλλόπουλος

Στα πλαίσια της παρούσας διατριβής αποτυπώθηκαν οι εκπομπές και η κατανάλωση καυσίμου πολλών οχημάτων σε διάφορες συνθήκες οδήγησης και διερευνήθηκαν οι τεχνολογίες μείωσής τους. Η επίπτωση συμβατικών τεχνολογιών μείωσης κατανάλωσης εξετάστηκε με μοντελοποιήσεις κύκλων οδήγησης NEDC, WLTP, CADC σε ένα βενζινοκίνητο και ένα πετρελαιοκίνητο όχημα χρησιμοποιώντας την πλατφόρμα AVL Cruise. Οι τεχνολογίες που εξετάστηκαν περιλαμβάνουν ανάκτηση ενέργειας φρεναρίσματος, σύστημα start-stop, μείωση μάζας οχήματος, μείωση αεροδυναμικών αντιστάσεων, μείωση αντιστάσεων κύλισης, αλλαγές στο κιβώτιο ταχυτήτων και βελτιώσεις στην απόδοση του κινητήρα. Κάθε τεχνολογία έχει διαφορετική επίδραση σε κάθε κύκλο οδήγησης, ενώ η συνολική μείωση κατανάλωσης καυσίμου και εκπομπών CO2 που επιτεύχθηκε συνδυάζοντας όλες τις τεχνολογίες ήταν της τάξης του 12-14%. Όσον αφορά τις τεχνολογίες μείωσης ρύπων, εξετάστηκε η δυνατότητα μείωσης των εκπομπών NOx ενός Euro 6b ντίζελ οχήματος. Αρχικά μετρήθηκαν κατά RDE οι εκπομπές NOx και βρέθηκαν 5 φορές περισσότερες από το όριο των 80mg/km. H λειτουργία του κινητήρα του οχήματος προσομοιώθηκε σε εργαστηριακή πέδη, όπου εγκαταστάθηκε ένας πανομοιότυπος κινητήρας. Σε αυτόν έγιναν τροποποιήσεις στο σύστημα μετεπεξεργασίας καυσαερίων, με κύρια αλλαγή την αντικατάσταση του συστήματος LNT με σύστημα SCR. Οι τροποποιήσεις μείωσαν στις εκπομπές NOx κατά 90%, επιτυγχάνοντας συμμόρφωση με τα Euro 6 όρια, χωρίς να επιβαρύνουν την κατανάλωση καυσίμου. Στη συνέχεια εξετάστηκε η επίδραση των συνθηκών οδήγησης στις εκπομπές και την κατανάλωση καυσίμου. Συγκεκριμένα διερευνήθηκε η λειτουργία τριών Euro 6 ντίζελ σε κύκλους οδήγησης NEDC, WLTP, CADC και στο δρόμο σε κανονικά δρομολόγια εντός RDE νομοθεσίας και σε άλλα πιο δυναμικά. Η στρατηγική μείωσης των εκπομπών και των τριών οχημάτων φαίνεται να στοχεύει αποκλειστικά τον κύκλο NEDC, καθώς στα σημεία λειτουργίας εκτός του NEDC η χρήση αντιρρυπαντικών συστημάτων ελαχιστοποιείται. Οι εκπομπές κατά τον WLTP ήταν πιο κοντά στις εκπομπές που μετρήθηκαν σε πραγματικές συνθήκες, ωστόσο, το εύρος λειτουργίας του κινητήρα κατά τη μέτρηση στον δρόμο ήταν μεγαλύτερο από το εύρος κατά τις εργαστηριακές συνθήκες. Επιπλέον, τα επίπεδα εκπομπών NOx αυξάνονται δραματικά κατά την οδήγηση του οχήματος με πιο δυναμικό τρόπο, εκτός των προδιαγραφών του RDE κανονισμού. Τέλος, πραγματοποιήθηκαν μετρήσεις εκπομπών στο δρόμο σε ένα στόλο οχτώ οχημάτων, δύο ντίζελ, ένα βενζινοκίνητο, ένα όχημα φυσικού αερίου, ένα υγραεριοκίνητο, ένα υβριδικό και δύο παλαιότερα βενζινοκίνητα που έχουν μετατραπεί σε υγραεριοκίνητα. Κανένας τύπος καυσίμου/κινητήρα δεν είχε χαμηλές εκπομπές CO2, CO και NOx σε όλο το φάσμα των πραγματικών συνθηκών λειτουργίας. Ωστόσο αξίζει να σημειωθεί ότι τα παλαιότερα οχήματα υγραερίου-βενζίνης είχαν τις χειρότερες επιδόσεις εκπομπών, το όχημα με φυσικό αέριο είχε τις χαμηλότερες εκπομπές CO2 και ότι το υβριδικό είχε τις χαμηλότερες εκπομπές ρύπων CO και NOx συνδυαστικά. Όσον αφορά τους συμβατικούς τύπους οχημάτων, τα ντίζελ είχαν πολύ υψηλές εκπομπές NOx, ενώ τα βενζινοκίνητα σε δυναμικές συνθήκες οδήγησης, είχαν εξαιρετικά υψηλές εκπομπές CO φτάνοντας τις 35 φορές πάνω από τα νομοθετημένα όρια.


2016 ◽  
Vol 179 ◽  
pp. 1152-1165 ◽  
Author(s):  
D. Tsokolis ◽  
S. Tsiakmakis ◽  
A. Dimaratos ◽  
G. Fontaras ◽  
P. Pistikopoulos ◽  
...  

2019 ◽  
Vol 9 (1) ◽  
pp. 2-11
Author(s):  
Marina Efthymiou ◽  
Frank Fichert ◽  
Olaf Lantzsch

Abstract. The paper examines the workload perceived by air traffic control officers (ATCOs) and pilots during continuous descent operations (CDOs), applying closed- and open-path procedures. CDOs reduce fuel consumption and noise emissions. Therefore, they are supported by airports as well as airlines. However, their use often depends on pilots asking for CDOs and controllers giving approval and directions. An adapted NASA Total Load Index (TLX) was used to measure the workload perception of ATCOs and pilots when applying CDOs at selected European airports. The main finding is that ATCOs’ workload increased when giving both closed- and open-path CDOs, which may have a negative impact on their willingness to apply CDOs. The main problem reported by pilots was insufficient distance-to-go information provided by ATCOs. The workload change is important when considering the use of CDOs.


2021 ◽  
Vol 13 (13) ◽  
pp. 7011
Author(s):  
Abdulaziz A. Alotaibi ◽  
Naif Alajlan

Numerous studies addressed the impacts of social development and economic growth on the environment. This paper presents a study about the inclusive impact of social and economic factors on the environment by analyzing the association between carbon dioxide (CO2) emissions and two socioeconomic indicators, namely, Human Development Index (HDI) and Legatum Prosperity Index (LPI), under the Environmental Kuznets Curve (EKC) framework. To this end, we developed a two-stage methodology. At first, a multivariate model was constructed that accurately explains CO2 emissions by selecting the appropriate set of control variables based on model quality statistics. The control variables include GDP per capita, urbanization, fossil fuel consumption, and trade openness. Then, quantile regression was used to empirically analyze the inclusive relationship between CO2 emissions and the socioeconomic indicators, which revealed many interesting results. First, decreasing CO2 emissions was coupled with inclusive socioeconomic development. Both LPI and HDI had a negative marginal relationship with CO2 emissions at quantiles from 0.2 to 1. Second, the EKC hypothesis was valid for G20 countries during the study period with an inflection point around quantile 0.15. Third, the fossil fuel consumption had a significant positive relation with CO2 emissions, whereas urbanization and trade openness had a negative relation during the study period. Finally, this study empirically indicates that effective policies and policy coordination on broad social, living, and economic dimensions can lead to reductions in CO2 emissions while preserving inclusive growth.


Sign in / Sign up

Export Citation Format

Share Document