scholarly journals Development and Performance Evaluation of an Improved Thermal Performance Wood Stove using Skirt

2021 ◽  
Vol 28 (1) ◽  
pp. 93-102
Author(s):  
I. Ajunwa ◽  
C.O. Folayan ◽  
G.Y. Pam ◽  
S. Abubakar ◽  
M.J. Iorpenda ◽  
...  
Keyword(s):  
Energy Source ◽  
Performance Evaluation ◽  
Fuel Consumption ◽  
Thermal Performance ◽  
Thermal Efficiency ◽  
Heat Energy ◽  
Specific Fuel Consumption ◽  
Wood Stove ◽  
Water Boiling Test ◽  
And Performance

The importance of heat energy source from wood to humanity cannot be over emphasised since many depend on it for their heating needs. In this work, a wood stove was designed, constructed and tested without a skirt and with a detachable skirt of height 120 mm (same height as the pot used for the experiment) to ascertain the influence of the skirt on the stove in terms of thermal performance in a water boiling test. Thermal efficiency and specific fuel consumption were evaluated. It was found that the stove tested without a skirt gave an average thermal efficiency of 31.33% and an average specific fuel consumption of 0.14 kg/l. When tested with a skirt, however, the stove gave an average thermal efficiency of 38.65% and an average specific fuel consumption of 0.09 kg/l. This signifies an improvement in thermal performance by the use of skirt on the stove designed. Keywords: Humanity, Globally, Detachable-skirt, Thermal performance, Wood stove.

Turbocharged spark-ignition engine performance prediction in various inlet charged air temperatures fueled with gasoline–ethanol blends

2020 ◽  
pp. 146808742093171
Author(s):  
Reza Farzam ◽  
Bahram Jafari ◽  
Fateme Kalaki
Keyword(s):  
Fuel Consumption ◽  
Air Temperature ◽  
Thermal Efficiency ◽  
Engine Performance ◽  
Spark Ignition Engine ◽  
Specific Fuel Consumption ◽  
Brake Specific Fuel Consumption ◽  
Brake Torque ◽  
Combustion Duration ◽  
And Performance

In this research, the effect of alternative fuels and the inlet charged air temperature is numerically investigated on the performance of a turbocharged spark-ignition engine. For this purpose, a one-dimensional engine and turbocharger model is created in an engine simulation and performance analysis software and validated with former experimental results. Then, the model is run with four fuel types, including two gasoline types with different octane numbers and two ethanol–gasoline blend fuels—E25 and E85. In each case, the inlet charged air temperature is changed from cold to hot condition and performance characteristics such as the spark advance timing, brake torque, brake-specific fuel consumption and thermal efficiency, emissions and the ignition delay and combustion duration are obtained from simulation results. The results illustrate that by decreasing the inlet charged air temperature, the spark timing is more advanced due to less knock and the brake torque increases. Also, the brake-specific fuel consumption and the brake NOx and CO2 decrease and thermal efficiency increases in all fuel types. The results also demonstrate that in higher ethanol percent in blend fuels, all engine performance characteristics improve except brake-specific fuel consumption; as changing the fuel at constant fuel-to-air equivalence ratio from E25 to E85 in various revolutions per minute causes a 5.8% increase in the brake torque, 1.06% increase in the thermal efficiency, 43% and 3.9% decrease in the brake NOx and CO2 and 5.8 °CA decrease in the combustion duration, on average; while the brake-specific fuel consumption and the peak pressure increase 29% and 20%, respectively.

Exergy analysis of a turboprop engine at different flight altitude and speeds using novel consideration

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Ali Dinc ◽  
Yousef Gharbia
Keyword(s):  
Fuel Consumption ◽  
Thermal Efficiency ◽  
Exergy Efficiency ◽  
Specific Fuel Consumption ◽  
Flight Altitude ◽  
Fuel Flow ◽  
Turboprop Engine ◽  
Shaft Power ◽  
Two Parameters ◽  
The Relationship

Abstract In this study, exergy efficiency calculations of a turboprop engine were performed together with main performance parameters such as shaft power, specific fuel consumption, fuel flow, thermal efficiency etc., for a range of flight altitude (0–14 km) and flight speeds (0–0.6 Mach). A novel exergy efficiency formula was derived in terms of specific fuel consumption and it is shown that these two parameters are inversely proportional to each other. Moreover, a novel exergy efficiency and thermal efficiency relation was also derived. The relationship showed that these two parameters are linearly proportional to each other. Exergy efficiency of the turboprop engine was found to be in the range of 23–33%. Thermal efficiency of the turboprop engine was found to be around 25–35%. Exergy efficiency is higher at higher speeds and altitude where the specific fuel consumption is lower. Conversely, exergy efficiency of the engine is lower for lower speeds and altitude where the specific fuel consumption is higher.

scholarly journals Control of Exhaust Emissions Using Piston Coating on Two-StrokeSI Engines with Gasoline Blends

2021 ◽  
Vol 8 (1) ◽  
pp. H16-H20
Author(s):  
A.V.N.S. Kiran ◽  
B. Ramanjaneyulu ◽  
M. Lokanath M. ◽  
S. Nagendra ◽  
G.E. Balachander
Keyword(s):  
Fuel Consumption ◽  
Thermal Efficiency ◽  
Internal Combustion Engines ◽  
Fossil Fuels ◽  
Engine Performance ◽  
Exhaust Emissions ◽  
Specific Fuel Consumption ◽  
Thermal Barrier ◽  
Piston Crown ◽  
Barrier Coating

An increase in fuel utilization to internal combustion engines, variation in gasoline price, reduction of the fossil fuels and natural resources, needs less carbon content in fuel to find an alternative fuel. This paper presents a comparative study of various gasoline blends in a single-cylinder two-stroke SI engine. The present experimental investigation with gasoline blends of butanol and propanol and magnesium partially stabilized zirconium (Mg-PSZ) as thermal barrier coating on piston crown of 100 µm. The samples of gasoline blends were blended with petrol in 1:4 ratios: 20 % of butanol and 80 % of gasoline; 20 % of propanol and 80 % of gasoline. In this work, the following engine characteristics of brake thermal efficiency (BTH), specific fuel consumption (SFC), HC, and CO emissions were measured for both coated and non-coated pistons. Experiments have shown that the thermal efficiency is increased by 2.2 % at P20. The specific fuel consumption is minimized by 2.2 % at P20. Exhaust emissions are minimized by 2.0 % of HC and 2.4 % of CO at B20. The results strongly indicate that the combination of thermal barrier coatings and gasoline blends can improve engine performance and reduce exhaust emissions.

scholarly journals EXPERIMENTAL ANALYSIS OF THE COMBUSTION CHAMBER COATED WITH Mo AND Al2O3-TiO2 IN A DIESEL ENGINE

2021 ◽  
Vol 55 (4) ◽  
Author(s):  
Murugan Kuppusamy ◽  
Thirumalai Ramanathan ◽  
Udhayakumar Krishnavel ◽  
Seenivasan Murugesan
Keyword(s):  
Combustion Chamber ◽  
Fuel Consumption ◽  
Thermal Efficiency ◽  
Performance Test ◽  
Ceramic Powder ◽  
Specific Fuel Consumption ◽  
Emission Characteristic ◽  
Powder Materials ◽  
Brake Specific Fuel Consumption ◽  
Brake Thermal Efficiency

The effect of thermal-barrier coatings (TBCs) reduces fuel consumption, effectively improving the engine efficiency. This research focused on a TBC with a thickness of 300 µm insulating the combustion chamber of a direct ignition (DI) engine. The piston crown, inlet and exhaust-valve head were coated using air-plasma-spray coating. Ceramic powder materials such as molybdenum (Mo) and aluminum oxide titanium dioxide (Al2O3-TiO2) were used. A performance test of the engine with the coated combustion chamber was carried out to investigate the brake power, brake thermal efficiency, volumetric efficiency, brake specific fuel consumption and air-fuel ratio. Also, an emission-characteristic test was carried out to investigate the emissions of unburned hydrocarbon (HC), carbon monoxide (CO), nitrogen oxides (NO, NO2, NO3) and smoke opacity (SO). The results reveal that the brake thermal efficiency and brake specific fuel consumption show significant increases because of these coating materials. The effect of the Al2O3-TiO2 coating significantly reduces the HC and CO engine emissions.

CI Engine Model Predictive Control With Availability Destruction Minimization

2018 ◽  
Author(s):  
Muataz Abotabik ◽  
Richard T. Meyer
Keyword(s):  
Energy Source ◽  
Model Predictive Control ◽  
Fuel Consumption ◽  
Predictive Control ◽  
Alternative Fuels ◽  
Combustion Engine ◽  
Tracking Error ◽  
Specific Fuel Consumption ◽  
Nox Emissions ◽  
Compression Ignition Engine

Major interests in the automotive industry include the use of alternative fuels and reduced fuel usage to address fuel supply security concerns and regulatory requirements. The majority of previous internal combustion engine (ICE) control strategies consider only the First Law of Thermodynamics (FLT). However, FLT is not able to distinguish losses in work potential due to irreversibilities, e.g., up to 25% of fuel exergy may be lost to irreversibilities. To account for these losses, the Second Law of Thermodynamics (SLT) is applicable. The SLT is used to identify the quality of an energy source via availability since not all the energy in a particular energy source is available to produce work; therefore optimal control that includes availability may be another path toward reduced fuel use. Herein, Model Predictive Control (MPC) is developed for both FLT and SLT approaches where fuel consumption is minimized in the former and availability destruction in the latter. Additionally, both include minimization of load tracking error. The controls are evaluated in the simulation of a single cylinder naturally aspirated compression ignition engine that is fueled with either 20% biodiesel and 80% diesel blend or diesel only. Control simulations at a constant engine speed and changing load profile show that the SLT approach results in higher SLT efficiency, reduced specific fuel consumption, and decreased NOx emissions. Further, compared to use of diesel only, use of the biodiesel blend resulted in less SLT efficiency, higher specific fuel consumption, and lower NOx emissions.

Impact of Oxidation Inhibitors on Performance and Emission Characteristics of a Low Heat Rejection Engine

2017 ◽  
Vol 8 (4) ◽  
Author(s):  
P.S. Kumar ◽  
S.A. Kannan ◽  
A. Kumar ◽  
K.A.V. Geethan
Keyword(s):  
Combustion Chamber ◽  
Fuel Consumption ◽  
Thermal Efficiency ◽  
Specific Fuel Consumption ◽  
Nox Emission ◽  
Emission Characteristics ◽  
Brake Thermal Efficiency ◽  
Heat Rejection ◽  
Oxidation Inhibitors ◽  
Low Heat Rejection Engine

In this study, for the first time analysis of a low heat rejection engine was carried out along with the addition of oxidation inhibitors. If the combustion chamber components of the engine such as piston, cylinder head, and inlet and outlet valves are insulated with a thermal barrier material, then the engine will be referred as low heat rejection engine. In this study yttria stabilized zirconia was coated on the combustion chamber components for a thickness of about 150 microns. Then the analysis of performance parameters such as brake thermal efficiency and specific fuel consumption and emission characteristics such as emission of carbon monoxide, hydrocarbon and nitrogen oxide was carried out in single cylinder four stroke diesel engine with electrical loading using diesel and pongamia methyl ester as the fuels. The major problem associated with the usage of biodiesels and low heat rejection engine is the increased NOX emission than the normal engine operated with the diesel. This problem has been overcome by the usage of oxidation inhibitors such as ethyl hexyl nitrate (EHN), tert-butyl hydroquinone (TBHQ). The results showed that addition of oxidation inhibitors leads to increase in brake thermal efficiency, reduced specific fuel consumption and reduced NOX emission.

The Comparative Trail Research on the Performance of a Diesel Engine Fuelled with Diesel Fuel and Biodiesel/Diesel Blended Fuel

2011 ◽  
Vol 142 ◽  
pp. 103-106
Author(s):  
Wen Ming Cheng ◽  
Hui Xie ◽  
Gang Li
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Diesel Fuel ◽  
Thermal Efficiency ◽  
Specific Fuel Consumption ◽  
Brake Specific Fuel Consumption ◽  
Brake Thermal Efficiency ◽  
Series Of Experiments ◽  
Blended Fuel ◽  
Load Conditions

This paper discusses the brake specific fuel consumption and brake thermal efficiency of a diesel engine using cottonseed biodiesel blended with diesel fuel. A series of experiments were conducted for the various blends under varying load conditions at a speed of 1500 rpm and 2500 rpm and the results were compared with the neat diesel. From the results, it is found that the brake specific fuel consumption of cottonseed biodiesel is slightly higher than that of diesel fuel at different engine loads and speeds, with this increase being higher the higher the percentage of the biodiesel in the blend. And the brake thermal efficiency of cottonseed biodiesel is nearly similar to that of diesel fuel at different engine loads and speeds. From the investigation, it is concluded that cottonseed biodiesl can be directly used in diesel engines without any modifications, at least in small blending ratios.

scholarly journals Development of Electrically Aerated Stove for Pyrolyzed Briquettes

2020 ◽  
pp. 37-43
Author(s):  
O. K. Fadele ◽  
M. B. Usman ◽  
O. C. Ariyo ◽  
U. U. Emeghara ◽  
D. O. Adelani ◽  
...  
Keyword(s):  
Combustion Chamber ◽  
Burning Rate ◽  
Fuel Consumption ◽  
Power Output ◽  
Thermal Efficiency ◽  
Thermal Parameters ◽  
Specific Fuel Consumption ◽  
Mean Values ◽  
Wood Shavings ◽  
The Mean

In this study, an electrically aerated stove was developed using locally available materials. The performance of the stove was evaluated by utilizing briquettes produced from pyrolyzed jatropha shell and Eucalyptus camadulensis wood shavings. Thermal parameters such as thermal efficiency, power output, specific fuel consumption and burning rate were determined. The mean values obtained for the thermal efficiency, power output, specific fuel consumption and burning rate were 7.62 %, 1685 J/s, 0.2377 g/g, 330.90 g/hr respectively. The performance of the briquette stove was considered to not be suboptimal. The thermal efficiency can further be improved by proper insulation and adequate utilization of the heat generated in the combustion chamber.

scholarly journals Design and Performance Evaluation of Supplemental Air Supplied Charcoal Stove

2015 ◽  
Vol 54 ◽  
pp. 1-10
Author(s):  
Segun R. Bello ◽  
M.A. Onilude ◽  
T.A. Adegbulugbe
Keyword(s):  
Performance Evaluation ◽  
Thermal Efficiency ◽  
Residential Buildings ◽  
Power Input ◽  
Performance Comparison ◽  
Performance Characteristics ◽  
Experimental Setup ◽  
Test Procedures ◽  
Air Supply ◽  
And Performance

Improved charcoal stoves are known to generally develop high thermal efficiencies, but most generate appreciable level of gas emissions which has made them unsuitable for use within residential buildings. In order to eliminate this constraint, a supplemental air supply power pack was introduced to improve charcoal stove thermal and aesthetic performance. This paper described the experimental setup, test procedures and results showing optimized performance. Comparison between performance characteristics shows the air aspirated stove and other improved charcoal stove showed more than 20% increased efficiency, power input of 2.26 kW (0.691Kw/hr) and overall thermal efficiency of 36.74% for the improved stove, the stove is thermally efficient more than the traditional stove.

Sign in / Sign up

Export Citation Format

Share Document