scholarly journals Probabilistic seismic hazard maps for the North Balkan region

1999 ◽  
Vol 42 (6) ◽  
Author(s):  
R. M. W. Musson

A set of seismic hazard maps, expressed as horizontal peak ground acceleration, have been computed for a large area of Central and Eastern Europe covering the North Balkan area (Former Yugoslavia, Hungary, Romania). These are based on: a) a compound earthquake catalogue for the region; b) a seismic source model of 50 zones compiled on the basis of tectonic divisions and seismicity, and c) a probabilistic methodology using stochastic (Monte Carlo) modelling. It is found that the highest hazard in the region comes from intermediate focus earthquakes occurring in the Vrancea seismic zone; here the hazard exceeds 0.4 g at return periods of 475 years. Special account has been taken of the directional nature of attenuation from this source.

2015 ◽  
Vol 2 (2) ◽  
Author(s):  
Myo Thant ◽  
Subagyo Pramumijoyo ◽  
Heru Hendrayana ◽  
Hiroshi Kawase ◽  
Agus Darmawan Adi

The probabilistic seismic hazard maps are developed for Yogyakarta depression area. The earthquake catalog of ANSS (1970-2007) is taken into account with the complement of NEIC (USGS, 1973-2007) and the records of BMG (2000-2004). On the basis of seismicity of the area, tectonics and geological information, the seismic source zones are characterized for this area. The seismicity parameters of each seismic source are determined by applying the classical Gutenberg-Richter recurrence model, regarding the historical records. The attenuation relation for Yogyakarta depression area cannot be evaluated since the sufficient strong ground motion records are not available for this region. Therefore the attenuation relations which were developed for other territories as Europe and Japan are used for the present hazard calculation by validating, using the aftershocks records, modeling the peak ground acceleration maps for the recent event, 27 May, 2006, Yogyakarta earthquake inserting the damage area distribution pattern. The probabilistic seismic hazard maps are finally developed by using the McGuire (1976) EQRISK computer program by modifying for the present purpose. The seismic hazard maps expressed in term of peak ground acceleration are developed for the recurrence intervals of 10, 50, 100, 200 and 500 years


2020 ◽  
Vol 20 (6) ◽  
pp. 1639-1661
Author(s):  
Khalid Mahmood ◽  
Naveed Ahmad ◽  
Usman Khan ◽  
Qaiser Iqbal

Abstract. Probabilistic seismic hazard analysis of Peshawar District has been performed for a grid size of 0.01∘. The seismic sources for the target location are defined as the area polygon with uniform seismicity. The earthquake catalogue was developed based on the earthquake data obtained from different worldwide seismological networks and historical records. The earthquake events obtained at different magnitude scales were converted into moment magnitude using indigenous catalogue-specific regression relationships. The homogenized catalogue was subdivided into shallow crustal and deep-subduction-zone earthquake events. The seismic source parameters were obtained using the bounded Gutenberg–Richter recurrence law. Seismic hazard maps were prepared for peak horizontal acceleration at bedrock level using different ground motion attenuation relationships. The study revealed the selection of an appropriate ground motion prediction equation is crucial for defining the seismic hazard of Peshawar District. The inclusion of deep subduction earthquakes does not add significantly to the seismic hazard for design base ground motions. The seismic hazard map developed for shallow crustal earthquakes, including also the epistemic uncertainty, was in close agreement with the map given in the Building Code of Pakistan Seismic Provisions (2007) for a return period of 475 years on bedrock. The seismic hazard maps for other return periods i.e., 50, 100, 250, 475 and 2500 years, are also presented.


2019 ◽  
Author(s):  
Khalid Mahmood ◽  
Usman Khan ◽  
Qaiser Iqbal ◽  
Naveed Ahmad

Abstract. The probabilistic seismic hazard analysis of Peshawar District has been conducted in for a grid size of 0.01. The seismic sources for the target location are defined as the area polygon with uniform seismicity for which, the earthquake catalogues were obtained from different worldwide seismological network data. The earthquake catalogues obtained in different magnitude scale was converted into moment magnitude using regression analysis. The homogenized catalogue was then further subdivided into shallow crustal and deep subduction zone earthquake events for which, the seismic source parameters were obtained using Bounded Gutenberg-Richter Recurrence law. The seismic hazard maps were prepared in term of PGA at bedrock using the different ground motion attenuation relationships. The study shows that; the selection of appropriate ground motion prediction equation is an important factor in deciding the seismic hazard of Peshawar District. The inclusion of deep subduction earthquake does not add significantly to the seismic hazard. The calculated seismic hazard map for shallow crustal earthquake after including the epistemic uncertainty was in close agreement to that developed by BCP-2007 for a return period of 475 years on bedrock. The seismic hazard maps for other return periods i.e., 50, 100, 250, 475 and 2500 years were then prepared.


Author(s):  
Ф.Ф. Аптикаев

Задание сейсмических воздействий в отечественных строительных нормах практически не меняется в течение последних 60 лет. Накопленные эмпирические данные по сильным движениям позволяют коренным образом усовершенствовать методику расчета зданий и сооружений на сейсмостойкость. Ожидается снижение погрешностей расчета примерно вдвое. Цель работы. В последнее время много внимания уделяется проблемам построения карт сейсмической опасности в ускорениях. Однако по традиции в нашей стране такие карты оценивают сейсмическую опасность в баллах шкалы сейсмической интенсивности. В большинстве стран сейсмическая опасность оценивается именно в ускорениях. Строились такие карты и в нашей стране. В частности, карты ОСР-97 и ОСР-2012 имели вариант и в ускорениях. Построение карт сейсмической опасности в ускорениях не имеет принципиальных трудностей. Проблема в том, что ускорения не являются адекватной мерой сейсмических воздействий. Более половины века тому назад американские ученые на эмпирическом материале показали, что связь ускорений с баллами, а, следовательно, и с повреждаемостью зданий неоднозначна: шкалы сейсмической интенсивности различны для разных расстояний и грунтов. Ошибка в оценке последствий землетрясения по ускорениям грунта может достигать 2 баллов. Следовательно, расчет ожидаемых воздействий следует производить с учетом других характеристик сейсмических волн. К тому же, попытки построения карт сейсмической опасности строились без учета данных инженерной сейсмологии и с нарушениями правил теории вероятностей и поэтому обладают не только определенными достоинствами, но и серьезными недостатками. Некоторые исследователи считают, что скорости колебаний лучше коррелируются с повреждениями сооружений, по крайней мере, многоэтажных зданий и подземных трубопроводов. Методы работы. Однако анализ эмпирических данных показал, что использование ускорений, скоростей и смещений характеризуется примерно одинаковой точностью. Рассмотрены способы построения карт общего сейсмического районирования. В действующей шкале сейсмической интенсивности ГОСТ Р 57546.2017 приведены оценки корреляции повреждаемости зданий с различными параметрами сейсмических колебаний: ускорениями, скоростями, смещениями, мощностью колебаний грунта. Оценено влияние продолжительности колебаний. Результаты работы. Показано, что дальнейшее повышение надежности расчетов объектов на сейсмостойкость связана с представлением сейсмических воздействий не с амплитудами колебаний, а с энергетическими характеристиками сейсмических волн The specification of seismic effects in domestic building codes has remained practically unchanged over the past 60 years. The accumulated empirical data on strong ground notions make it possible to radically improve the methodology for calculating buildings and other structures for seismic resistance. It is expected that the calculation errors will be reduced by about half. Aim. Recently, much attention has been paid to the problems of developing seismic hazard maps in accelerations. However, by tradition in our country, such maps assess the seismic hazard in terms of the seismic intensity scale. In most countries, seismic hazard is assessed in terms of accelerations. Such maps were also built in our country. In particular, OSR-97 maps also had a variant in acceleration. The construction of seismic hazard maps in accelerations has no fundamental difficulties. The problem is that accelerations are not an adequate measure of seismic effects. More than half a century ago, American scientists, using empirical material, showed that the relationship between accelerations and points, and, consequently, with the damage to buildings, is ambiguous: the seismic intensity scales are different for different distances and grounds. The error in assessing the consequences of an earthquake in terms of ground acceleration can reach 2 points. Therefore, the calculation of the expected impacts should be based on other characteristics of the seismic waves. In addition, attempts to construct seismic hazard maps were built without taking into account the data of engineering seismology and with violations of the rules of probability theory and therefore have not only certain advantages, but also serious drawbacks. Some researchers believe that vibration velocities correlate better with structural damage, at least in multi-storey buildings and underground pipelines. However, the analysis of empirical data showed that the use of accelerations, velocities and displacements is characterized by approximately the same accuracy. Methods. Methods for constructing maps of general seismic zoning, which have a higher accuracy in comparison with existing maps, are considered. In the current scale of seismic intensity GOST R 57546.2017 estimates of the correlation of damage to buildings with various parameters of seismic vibrations are given: accelerations, velocities, displacements, power of ground vibrations. The influence of the duration of the oscillations is estimated. Results. It is shown that a further increase in the reliability of calculations of objects for seismic resistance is associated with the representation of seismic effects not with vibration amplitudes, but with the energy characteristics of seismic waves


2007 ◽  
Vol 7 (5) ◽  
pp. 607-614 ◽  
Author(s):  
A. Orhan ◽  
E. Seyrek ◽  
H. Tosun

Abstract. The city of Eskişehir in inner-western Turkey has experienced a destructive earthquake with Ms=6.4 in 1956 in addition to many events with magnitudes greater than 5. It is located in a wide basin having young sedimentary units and thick alluvium soils which also include liquefiable sand materials. There is also an active fault passing beneath the city center and the groundwater level is very close to the ground surface. Approximately 600 thousand people are living in the province of Eskişehir. Therefore, the city and its vicinity have a high risk, when earthquake hazard is considered. This paper summarizes the probabilistic seismic hazard analysis (PSHA) which was performed for the province of Eskişehir and introduces seismic hazard maps produced by considering earthquakes with magnitude Ms≥4.0 occurred during the last 100-years and a seismic model composed of four seismic sources. The results of PSHA show that the average peak ground acceleration (PGA) for the city center is 0.40 g for 10 percent probability of exceedance in 50 years, for rock site. The seismic hazard maps were obtained by means of a program of Geographic Information System.


2007 ◽  
Vol 23 (1) ◽  
pp. 1-19 ◽  
Author(s):  
Eid Al-Tarazi ◽  
Eric Sandvol

Three models were used to produce three probabilistic hazard maps for the Jordan–Dead Sea transform (DST). No seismic source zones were proposed. Models I and II are based on spatially smoothed historical and instrumentally recorded earthquakes. Model I used the data with magnitudes greater than 3.0 for the time period 1900 to 2003, while Model II used data with the magnitude range between 5.0 and 7.0 for the time period 2100 B.C. to A.D. 2003. Model III is the weighted model that is based on characteristic earthquakes that occurred along each major fault in the last ∼4,100 years. To assess the peak ground acceleration (PGA), three different attenuation equations were used. The resulting hazard maps represent 10% probability of being exceeded in 50 years, which corresponds to a return period of 475 years. The maximum PGA value was 350 cm/sec2 for the northernmost part of the DST, namely, between latitudes 35.5° and 36.5° N, and the southwestern part of Cyprus. In the regions of maximum expected ground motion, there is general agreement between the results of this study and those of previous studies that used the seismic source zones. However, peak ground accelerations predicted in this study are typically 10–20% less than those of previous studies. We believe this study represents an improvement on prior seismic hazard evaluations for the region. In addition to the updated input data, we believe that, by integrating three models, a more robust estimate of the hazard is provided.


1996 ◽  
Vol 86 (5) ◽  
pp. 1372-1381 ◽  
Author(s):  
Tianqing Cao ◽  
Mark D. Petersen ◽  
Michael S. Reichle

Abstract We analyzed the historical seismicity in southern California to develop a rational approach for calculating the seismic hazard from background seismicity of magnitude 6.5 or smaller. The basic assumption for the approach is that future earthquakes will be clustered spatially near locations of historical mainshocks of magnitudes equal to or greater than 4. We analyzed the declustered California seismicity catalog to compute the rate of earthquakes on a grid and then smoothed these rates to account for the spatial distribution of future earthquakes. To find a suitable spatial smoothing function, we studied the distance (r) correlation for southern California earthquakes and found that they follow a 1/rµ power-law relation, where µ increases with magnitude. This result suggests that larger events are more clustered in space than smaller earthquakes. Assuming the seismicity follows the Gutenberg-Richter distribution, we calculated peak ground accelerations (PGA) for 10% probability of exceedance in 50 yr. PGA estimates range between 0.25 and 0.35 g across much of southern California. These ground-motion levels are generally less than half the levels of hazard that are obtained using the entire seismic source model that also includes geologic and geodetic data. We also calculated the overall uncertainty for the hazard map using a Monte Carlo method and found that the coefficient of variation is about 0.24 ± 0.01 for much of the region.


2001 ◽  
Vol 17 (3) ◽  
pp. 399-415 ◽  
Author(s):  
Jamal A. Abdalla ◽  
Yahia E-A. Mohamedzein ◽  
A. Abdel Wahab

This paper presents seismic hazard assessment and seismic zoning of Sudan and its vicinity based on probabilistic approach. The area studied lies between 22° E- 45° E and 0° - 24° N. Tectonics of Sudan and its vicinity is first reviewed. An updated NOAA catalogue, containing both historical and instrumental events and covering the period from 700 A.D. to 1993 is then used. Seismic source regions are modeled and relationships between earthquake magnitude and earthquake frequency are established. A modified attenuation relation is used. Seismic hazard assessment is then carried out for 60 km interval grid points. Seismic hazard maps of the studied area based on peak ground acceleration (PGA) for 10% probability of exceedance for time-spans of 50, 100, 200 and 250 years are presented. The results showed that the PGA ranges from 0.02g for low seismic activity regions to around 0.62g for high seismic activity regions. A seismic zone map is also shown for 475 years return period.


2015 ◽  
Vol 31 (1_suppl) ◽  
pp. S59-S84 ◽  
Author(s):  
Sanaz Rezaeian ◽  
Mark D. Petersen ◽  
Morgan P. Moschetti

The National Seismic Hazard Maps (NSHMs) are an important component of seismic design regulations in the United States. This paper compares hazard using the new suite of ground motion models (GMMs) relative to hazard using the suite of GMMs applied in the previous version of the maps. The new source characterization models are used for both cases. A previous paper ( Rezaeian et al. 2014 ) discussed the five NGA-West2 GMMs used for shallow crustal earthquakes in the Western United States (WUS), which are also summarized here. Our focus in this paper is on GMMs for earthquakes in stable continental regions in the Central and Eastern United States (CEUS), as well as subduction interface and deep intraslab earthquakes. We consider building code hazard levels for peak ground acceleration (PGA), 0.2-s, and 1.0-s spectral accelerations (SAs) on uniform firm-rock site conditions. The GMM modifications in the updated version of the maps created changes in hazard within 5% to 20% in WUS; decreases within 5% to 20% in CEUS; changes within 5% to 15% for subduction interface earthquakes; and changes involving decreases of up to 50% and increases of up to 30% for deep intraslab earthquakes for most U.S. sites. These modifications were combined with changes resulting from modifications in the source characterization models to obtain the new hazard maps.


Sign in / Sign up

Export Citation Format

Share Document