scholarly journals Pengaruh Geometri Pahat Variabel Helix Angle Pada Parameter Mesin Cnc Milling Vertikal Berbasis Mikrokontroler Terhadap Nilai Getaran Chatter

2020 ◽  
Vol 1 (2) ◽  
pp. 62-71
Author(s):  
Festo Andre Hardinsi ◽  
Oyong Novareza ◽  
Achmad As’ad Sonief
Keyword(s):  
Feed Rate ◽  
Helix Angle ◽  
Machining Process ◽  
Depth Of Cut ◽  
Cnc Milling ◽  
Chatter Vibration ◽  
Vibration Acceleration ◽  
Slot Milling ◽  
Excited Vibration ◽  
Variable Helix

Abstrak Objektif. Getaran yang sering terjadi pada pengerjaan proses produksi menggunakan permesinan CNC milling merupakan hal yang sangat penting untuk diperhitungkan. Getaran ini dapat menyebabkan perubahan dimensi dan mempengaruhi tingkat kualitas benda kerja yang dihasilkan, sehingga efek getaran chatter atau self-excited vibration  pada proses pengerjaan produksi menjadi masalah utama dalam proses permesinan milling. Nilai getaran chatter ditentukan menggunakan grafik SLD secara ekperimental untuk mengetahui batas antara chatter free dan chatter occurs. Material and Metode. Material yang digunakan dalam penelitian ini adalah Stanless steel 304, dengan menggunakan sensor MPU 6050 yang terhubung pada mikrokontroler Arduino Uno menggunakan software LabVIEW 2019 student edition yang digunakan untuk mengidentifikasi nilai acceleration getaran chatter. Besar nilai acceleration diukur menggunakan FFT menggunakan software DIAdem 2019 student. Metode yang digunakan dalam penelitian ini adalah dalam bentuk eksperimental, dengan geometri pahat Variabel Helix Angle (VHA) 2 variasi sudut yaitu 40/42 (Derajat), Spindel Speed sebesar 2000,2500,3000 (RPM) , Axial Depth Of Cut sebesar 0.5, 1.0, 1.5 (mm), dan Feed Rate sebesar 100, 125 dan 150 (mm/s). Hasil. Hasil pada Grafik Stability Lobe Diagram yang didapatkan pada proses permesinan slot milling menggunakan pahat variable helix angle 40/42 derajat dengan feed rate 150 mm/mnt memiliki  chatter free yang lebih tinggi dibandingkan dengan feed rate 100 dan 125 mm/mnt. Kesimpulan.  Dari hasil yang didapatkan bahwa semakin tinggi nilai feed rate maka nilai acceleration getaran chatter semakin rendah. Untuk pengembangan dalam penelitian selanjutkan maka perlu dilakukan pemilihan parameter geometri pahat dengan variasi 3 sudut mata pahat untuk mengetahui nilai getaran chatter yang signifikan. Abstrack Objective.Vibration that often occurs in the production process using CNC milling is very important to be taken into account. This is vibration can cause dimensional changes and affect the level of quality of the workpiece produced. Therefore, effect of chatter vibration or self-excited vibration on production process becomes a major problem in the milling machining process. Chatter vibration values ​​can be determined using experimental SLD for determine boundary between free chatter and chatter occur. Materials and Methods .The material used in this study is stanless steel 304, using the MPU 6050 sensor connected to Arduino Uno mikrokontroler using LabVIEW 2019 student edition software that is used to identify chatter vibration acceleration. Acceleration is measured using FFT using  2019 student DIAdem software. The method used is experimental, geometry Variable Helix Angle 2 angular 40/42 (Degrees), Spindel Speed ​​of 2000,2500,3000 (RPM), Axial Depth Of Cut of 0.5, 1.0, 1.5 (mm), and Feed Rate of 100, 125 and 150 (mm / s). Results. Results in the Graph Lobe Stability Diagram obtained in  slot milling machining process using a variable helix angle of 40/42 degrees with  feed rate of 150 mm / min have higher chatter free compared to feed rates of 100 and 125 mm / min. Conclusion. The results show that  higher the value of  feed rate, chatter vibration acceleration value is lower. For further development in research, it is necessary to select  tool geometry parameters with variations of 3 tool eye angle to determine  chatter vibration significant

scholarly journals OPTIMIZATION OF VARIABEL HELIX ANGLE PARAMETERS IN CNC MILLING OF CHATTER AND SURFACE ROUGHNES USING TAGUCHI METHOD

2021 ◽  
Vol 9 (1) ◽  
pp. 35-44
Author(s):  
Festo Andre Hardinsi ◽  
◽  
Oyong Novareza ◽  
Achmad As'ad Sonief
Keyword(s):  
Surface Roughness ◽  
Taguchi Method ◽  
Feed Rate ◽  
Helix Angle ◽  
Spindle Speed ◽  
Depth Of Cut ◽  
Cnc Milling ◽  
Excited Vibration ◽  
Optimal Value ◽  
Variable Helix

In the manufacturing industries, the main problem in process of operating CNC milling machine was chatter effect (self-excited vibration) which increases the quality of the surface roughness. In this study is to determine optimal value of parameters for chatter and surface roughness. The chatter measured using accelerometer MPU-6050 with Arduino by software LabVIEW-2019 based on peaks-FFT value and the surface roughness measured by SJ-301 tester. The research parameters like variable helix angle, spindle speed, feed rate, and depth of cut using stainless steel 304 by Taguchi method. The optimum parameters value obtained are variable helix 35/38 degrees, spindle speed 3000 RPM, feed rate 150 mm/min and depth of cut 0.4 mm. Based on ANOVA value, the variable helix angle and depth of cut are found to be significant for chatter and surface roughness. The depth of cut was high contribution by ANOVA chatter by 93.84% and surface roughness by 91.93%.

scholarly journals Chatter Vibration Comparison Between Normal Helix Angle and Variable Helix Angle in End Milling Process Based on Spectrum Analysis

2020 ◽  
Vol 11 (3) ◽  
pp. 531-536
Author(s):  
Achmad As'ad Sonief ◽  
◽  
Arda Nur Fauzan ◽  
Fachry Azlan ◽  
Muhammad Aziz Bashori
Keyword(s):  
Spectrum Analysis ◽  
Cutting Tool ◽  
End Milling ◽  
Helix Angle ◽  
Depth Of Cut ◽  
Chatter Vibration ◽  
Machining Processes ◽  
Chatter Vibrations ◽  
Excited Vibration ◽  
Variable Helix

Chatter vibration in machining processes is often found in cutting processes which will decrease the machining efficiency and the surface quality of the products. Chatter is a relative vibration of the cutting tool and workpiece caused by the fluctuation of cutting force that is concerned to be a self-excited vibration. The variable Helix Angle Cutting tool which has pitch angle variation will also inflict different tooth passing frequencies on the flute that stand contiguous and trim the resonance frequency. This research aims to compare chatter vibrations that occurred between Normal Helix Angle and Variable Helix Angle cutting tool based on spectrum analysis on cutting parameter variety (depth of cut; rotation speed; feed rate milling). The outcome is spectrum analysis can detect the chatter phenomenon, measure the natural frequency (38-42 Hz), and also compare chatter vibrations between two tools appropriately.

scholarly journals OPTIMATION PARAMETERS OF CNC MILLING PROGRAMMING MACHINE ON THE PROCESS TIME AND ITS EFFECT ON THE EFFICIENCY

2019 ◽  
Vol 3 (2) ◽  
pp. 62 ◽  
Author(s):  
Lydia Anggraini ◽  
Ivan Junixsen
Keyword(s):  
Feed Rate ◽  
Processing Time ◽  
Operation Time ◽  
Machining Process ◽  
Process Time ◽  
Depth Of Cut ◽  
Machining Parameters ◽  
Cnc Milling ◽  
Optimal Processing ◽  
Optimization Parameters

The problems revealed in this research is about Optimization parameters of CNC milling programing machine on the process time and its effect on the efficiency. The purpose of this research are to know the effect of feed rate, depth of cut, and maximum stepdown on processing time in CNC milling programming and searching for the best machining parameters that yield optimal processing time on CNC milling programming. The result can be in the simulation of machining distance or operation time, length of feed step or feed cut length, and length of step without feeding or fast traverse length. Experiment result data is used for see the influence, and contribution of each parameter to the machining process time, also the contribution of the optimized parameters for each process that makes the CNC milling machining process time, and cost will be more efficient.

scholarly journals Penerapan Metode Taguchi untuk Optimasi Setting Parameter CNC Milling Terhadap Kekasaran Permukaan Material

2020 ◽  
Vol 2 (2) ◽  
pp. 49-60
Author(s):  
Farizi Rachman Farizi Rachman ◽  
Bayu Wiro K ◽  
Tri Andi Setiawan ◽  
Pradita Nurkholies
Keyword(s):  
Feed Rate ◽  
Base Plate ◽  
Spindle Speed ◽  
Depth Of Cut ◽  
Cnc Milling ◽  
End Mill

Industri manufaktur di Indonesia semakin meningkat seiring dengan tingkat kebutuhan manusia yang beraneka ragam dan memicu berkembangnya teknologi, salah satunya industri proses permesinan atau machining. Kualitas produk yang baik dapat dilihat dari tingkat kekasaran permukaannya karena kekasaran permukaan dapat mempengaruhi performa yang berkaitan dengan aspek fungsional dari produk. Pada penelitian ini telah dilakukan optimasi setting parameter CNC milling terhadap kekasaran permukaan pada material S50C dengan end mill HSS diameter 8 mm. Material S50C banyak digunakan dalam manufaktur mesin seperti mekanis base plate, roda gigi, standart punch head dan komponen mesin lainnya. Penelitian ini menggunakan metode Taguchi. Parameter yang digunakan yaitu spindle speed, Feed rate dan depth of cut dengan cairan pendingin sebagai variabel konstan. Parameter optimum untuk mendapatkan nillai kekasaran yang rendah yaitu spindle speed 1100 rpm, feed rate 46 mm/min dan depth of cut 0.5 mm. Dengan taraf signifikansi 0.1 menunjukkan bahwa spindle speed berpengaruh secara signifikan dengan kontribusi 38.42% diikuti feed rate dengan kontribusi 34.16%.

Characterisation, Performance and Optimisation of Nanocellulose Metalworking Fluid (MWF) for Green Machining Process

2021 ◽  
Vol 18 (4) ◽  
pp. 9188-9207
Author(s):  
Mahendran Samykano ◽  
J. Kananathan ◽  
K. Kadirgama ◽  
A. K. Amirruddin ◽  
D. Ramasamy ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Surface Roughness ◽  
Tool Wear ◽  
Feed Rate ◽  
Cutting Speed ◽  
Machining Process ◽  
Alumina Nanoparticles ◽  
Working Fluid ◽  
Depth Of Cut ◽  
Nanoparticle Concentration

The present research attempts to develop a hybrid coolant by mixing alumina nanoparticles with cellulose nanocrystal (CNC) into ethylene glycol-water (60:40) and investigate the viability of formulated hybrid nanocoolant (CNC-Al2O3-EG-Water) towards enhancing the machining behavior. The two-step method has been adapted to develop the hybrid nanocoolant at various volume concentrations (0.1, 0.5, and 0.9%). Results indicated a significant enhancement in thermal properties and tribological behaviour of the developed hybrid coolant. The thermal conductivity improved by 20-25% compared to the metal working fluid (MWF) with thermal conductivity of 0.55 W/m℃. Besides, a reduction in wear and friction coefficient was observed with the escalation in the nanoparticle concentration. The machining performance of the developed hybrid coolant was evaluated using Minimum Quantity Lubrication (MQL) in the turning of mild steel. A regression model was developed to assess the deviations in the tool flank wear and surface roughness in terms of feed, cutting speed, depth of the cut, and nanoparticle concentration using Response Surface Methodology (RSM). The mathematical modeling shows that cutting speed has the most significant impact on surface roughness and tool wear, followed by feed rate. The depth of cut does not affect surface roughness or tool wear. Surface roughness achieved 24% reduction, 39% enhancement in tool length of cut, and 33.33% improvement in tool life span. From this, the surface roughness was primarily affected by spindle cutting speed, feed rate, and then cutting depth while utilising either conventional water or composite nanofluid as a coolant. The developed hybrid coolant manifestly improved the machining behaviour.

Variable Helix Cutter Design to Suppress Regenerative Effect

2019 ◽  
Author(s):  
Norikazu Suzuki ◽  
Rikiya Ishiguro ◽  
Tomoki Morita ◽  
Eiji Shamoto
Keyword(s):  
Design Methodology ◽  
Design Method ◽  
Simultaneous Optimization ◽  
Axial Position ◽  
Depth Of Cut ◽  
Chatter Vibration ◽  
Major Mechanism ◽  
Variable Helix ◽  
Cutter Design ◽  
Regeneration Factor

Abstract Regeneration is a major mechanism to generate self-excited chatter vibration in cutting. Variable helix cutters are useful to suppress regeneration. Although simultaneous optimization of pitch/helix angles is significantly important, there is no practical design methodology to optimize the variable helix cutter geometry so far. In order to attain robust regeneration suppression, a new design method of variable helix cutters is proposed in the present study. The pitch angles vary along axial position due to disagreement of the helix angles. Because of this nature, regeneration can be suppressed in a robust manner with respect to changes of chatter frequency and/or spindle speed. The proposed design satisfies robustness against axial depth of cut variations. Optimal pitch/helix angles are formulated on the basis of distinctive relationship between the cutter geometry and “Regeneration Factor (RF)”, which is an index to quantify influence of regeneration in the process. Through analytical investigations, it is confirmed that regeneration can be suppressed effectively by the proposed method, resulting in significant chatter stability increase. Low immersion milling experiment verified significant stability and robustness of the proposed variable helix design.

Tool-Workpiece Temperature for Continuous and Interrupted Cutting of ASSAB 760 Steel with Dry Machining Process

2012 ◽  
Vol 476-478 ◽  
pp. 392-396
Author(s):  
M. Azuddin
Keyword(s):  
Feed Rate ◽  
Thermal Imaging ◽  
Temperature Increase ◽  
Cutting Speed ◽  
Machining Process ◽  
Depth Of Cut ◽  
Workpiece Temperature ◽  
Speed Increase ◽  
Interrupted Cutting ◽  
Imaging Camera

Temperature generated on the tool-workpiece has significant effect on the cutting performance. This paper present the tool-workpiece temperature result recorded by thermal imaging camera with various cutting parameter applied. The machining was done on ASSAB 720 steel workpiece for continuous and interrupted cutting. Generally, as the cutting speed, feed rate and depth of cut increases, the tool-workpiece temperature for both continuous and interrupted cutting will increase. Specifically, cutting speed increase from 250m/min to 350 m/min, tool-workpiece temperature increase about 25% at each increment level. The tool-workpiece temperature increase about 16% when the feed rate increases from 0.1 mm/rev to 0.2mm/rev. While, 27% increment was recorded when feed rate increase to 0.4 mm/rev. With the increase of depth of cut, the tool-workpiece temperature recorded an increment between 50oC to 65oC for both continuous and interrupted cutting.

Assessment of the Cutting Tooling Effect on Turning Chatter

2013 ◽  
Vol 433-435 ◽  
pp. 2101-2106
Author(s):  
Joon Hwang ◽  
Ey Hyoun Jeong ◽  
Eui Sik Chung ◽  
Steven Y. Liang
Keyword(s):  
Cutting Forces ◽  
Cutting Speed ◽  
Tool Geometry ◽  
Depth Of Cut ◽  
Nonlinear Phenomenon ◽  
Chatter Vibration ◽  
Machining Performance ◽  
Dynamic Component ◽  
Excited Vibration ◽  
Overhang Length

Machining performance is often limited by chatter vibration at the tool-workpiece interface. Chatter is a type of machining self-excited vibration which originates from the variation in cutting forces and the flexibility of the machine tool structure. Machining chatter is an inherently nonlinear phenomenon that is affected by many parameters such as cutting conditions, tool geometry, cutting speed, feed rate, depth of cut, overhang length of tool, clamping condition of workpiece. This study presents experimental approach for investigation of effects of various cutting tool geometry on the onset of chatter. In turning process, measured cutting force signal and triaxial accelerometer signal was used to know the characteristics of chatter vibration. The static and dynamic component of cutting forces reflect onset of chatter vibration. Proper selection of tooling is an important parameter in terms of chatter elimination in machining.

Chatter Investigation in Titanium Milling

2014 ◽  
Vol 1019 ◽  
pp. 318-324
Author(s):  
Jean Claude Fwamba ◽  
Lerato Crescelda Tshabalala ◽  
Cebo Philani Ntuli ◽  
Isaac Tlhabadira
Keyword(s):  
Feed Rate ◽  
End Milling ◽  
Processing Condition ◽  
Weight Ratio ◽  
Dimensional Accuracy ◽  
Milling Process ◽  
Machining Process ◽  
Depth Of Cut ◽  
Machining Performance ◽  
Chatter Vibrations

<span><p align="LEFT"><span><span style="font-family: Times New Roman;" face="Times New Roman">Titanium and its alloys have been experiencing extensive development over the past few decades. They have found wide applications in the aerospace, biomedical and automotive industries owing to their good strength-to-weight ratio and high corrosion resistance. Machining performance is often limited by chatter vibrations at the tool-workpiece interface. Chatter is an abnormal tool behaviour which is one of the most critical problems in the machining process and must be avoided to improve the dimensional accuracy and surface quality of the finished product. This research aims at investigating chatter trends in the end milling process and to identify machine parameters that have effects on chatter during machining. The machine parameters investigated include axial feed rate, spindle revolute speed and depth of cut. In this research, experimental data was collected using sensors to analyze the existence of chatter vibrations on each processing condition. This research showed that the combination of the machine parameters, feed rate and spindle speed within certain proportions has an influence on machine vibrations during end milling and if not managed properly, may lead to chatter. </span></span></p> <p align="LEFT"></p>

Stability prediction of milling process with variable pitch and variable helix cutters

2013 ◽  
Vol 228 (2) ◽  
pp. 281-293 ◽  
Author(s):  
Gang Jin ◽  
Qichang Zhang ◽  
Shuying Hao ◽  
Qizhi Xie
Keyword(s):  
Helix Angle ◽  
Milling Process ◽  
Force Model ◽  
Stability Prediction ◽  
Chatter Vibration ◽  
Variable Pitch ◽  
Tool Geometries ◽  
Variable Helix ◽  
Piecewise Continuous ◽  
The Stability

The use of variable pitch or helix cutters is a known means to prevent chatter vibration during milling. In this article, an alternative method based on an improved semi-discretization method is proposed to predict the stability of variable pitch or variable helix milling. In order to consider the effect of distributed system delays attributed to helix variation, the average delays were calculated for each flute after the engaged cutting flutes were divided into a finite number of axial elements. Meanwhile, a straightforward integral force model, which can consider the piecewise continuous regions of the cutting that describe the helix angle is used to determine the cutting force. Through comparisons with prior works, time-domain simulations, and cutting tests, the proposed approach was verified. In addition, the method was applied to examine the effect of tool geometries on stability trends. Several phenomena for certain combinations of pitch and helix angles are shown and explained.

Sign in / Sign up

Export Citation Format

Share Document