Adaptability Analysis of Deep Profile Control and Flooding Formula System in Water Injection Oilfield

2021 ◽  
Keyword(s):  
Water Injection ◽  
Profile Control ◽  
Deep Profile

Novel Profile Control Treatment Using Pore-Scale Polymer Elastic Microspheres

2013 ◽  
Vol 716 ◽  
pp. 413-417 ◽  
Author(s):  
Lei Li ◽  
Xue Mei Gao ◽  
Guang Lun Lei ◽  
Xiao Dong Wei
Keyword(s):  
Aqueous Solution ◽  
Oil Recovery ◽  
Water Injection ◽  
Control Agent ◽  
Control Treatment ◽  
Pore Scale ◽  
Swelling Property ◽  
Profile Control ◽  
Heterogeneous Formation ◽  
Deep Profile

In order to solve the deep profile control problem and improve oil recovery of the oilfield, a novel profile control agent pore-scale polymer elastic microspheres (PSPEMs) was synthesized. The swelling property of PSPEMs in aqueous solution was analyzed. Core flow test and double-tube sand pack models were used for studying profile control and flooding performance of PSPEMs in oil formation. The results show that PSPEMs have good swelling property in aqueous solution with high salinity, high temperature and high pressure. Fig 5 and Fig 6 show that PSPEMs are better than polyacrylamide polymer on profile control. Table 1 indicates PSPEMs can improve water injection profile of heterogeneous formation effectively and plug the high permeable layer first. The higher the concentration of PSPEMs, the shorter the time it spends to realize profile control. The results also confirm that use proper concentration of PSPEMs, the profile control efficiency can increase enormously.

scholarly journals Preparation and Characterization of Hydrophobic-Associated Microspheres for Deep Profile Control in Offshore Oilfields

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Qin Yu ◽  
Xiangguo Lu ◽  
Yubao Jin ◽  
Cui Zhang ◽  
Kuo Liu ◽  
...  
Keyword(s):  
Aqueous Media ◽  
Influence Factors ◽  
Performance Measurements ◽  
Swelling Properties ◽  
Profile Control ◽  
Swelling Rate ◽  
Deep Profile ◽  
Plugging Performance ◽  
Rheological Performance

Microspheres have excellent sealing performances such as injectivity, bridging-off, deep migration, and deformation performances, but their plugging effects are limited by the fast swelling rate and poor viscoelasticity. In this study, we synthesized a novel modified microsphere with polymerizable surfactant monomers and cationic monomers. We investigated the influence factors on the swelling performance and rheological properties of the microspheres and explored the ways to improve the plugging performance of hydrophobic-associating microspheres. The association behaviors in aqueous media of poly(acrylamide-co-methacry loyloxyethyl trimethyl ammonium chloride-co-n-dodecyl poly(etheroxy acrylate) P(AM-DMC-DEA) are proven to be mediated by the DEA content. Moreover, the hydrophobic association interaction has a strong effect on the performance of microspheres such as swelling properties, the rheological performance, and plugging properties. The swelling properties of microsphere studies exhibited the slow swelling rate. The rheological performance measurements showed significant improvements; yield stress, and creep compliance increased rapidly from 404 to 2060 Pa and 3.89 × 10−4 to 1.41 × 10−2 1/Pa, respectively, with DEA content in microspheres rising from 0.0% to 0.22%. The plugging properties of microspheres were enhanced by the slow swelling performance and good viscoelasticity.

An Experimental Research on Enhanced Oil Recovery Using Local Polymers

2021 ◽  
Author(s):  
Abiola Oyatobo ◽  
Amalachukwu Muoghalu ◽  
Chinaza Ikeokwu ◽  
Wilson Ekpotu
Keyword(s):  
Enhanced Oil Recovery ◽  
Experimental Research ◽  
Oil Recovery ◽  
Capital Investment ◽  
Oil And Gas ◽  
Produced Water ◽  
Water Injection ◽  
Gum Arabic ◽  
Oil And Gas Industry ◽  
Profile Control

Abstract Ineffective methods of increasing oil recovery have been one of the challenges, whose solutions are constantly sought after in the oil and gas industry as the number of under-produced reservoirs increases daily. Water injection is the most extended technology to increase oil recovery, although excessive water production can pose huge damage ranging from the loss of the well to an increase in cost and capital investment requirement of surface facilities to handle the produced water. To mitigate these challenges and encourage the utilization of local contents, locally produced polymers were used in polymer flooding as an Enhanced Oil Recovery approach to increase the viscosity of the injected fluids for better profile control and reduce cost when compared with foreign polymers as floppan. Hence this experimental research was geared towards increasing the efficiency of oil displacement in sandstone reservoirs using locally sourced polymers in Nigeria and also compared the various polymers for optimum efficiency. Starch, Ewedu, and Gum Arabic were used in flooding an already obtained core samples and comparative analysis of this shows that starch yielded the highest recovery due to higher viscosity value as compared to Ewedu with the lowest mobility ratio to Gum Arabic. Finally, the concentration of Starch or Gum Arabic should be increased for optimum recovery.

scholarly journals Experimental Research on the Optimization and Evaluation of the Polymer/Chromium-Ion Deep Profile Control System for the Fractured Low-Permeability Reservoirs

Processes ◽  
2020 ◽  
Vol 8 (9) ◽  
pp. 1021
Author(s):  
Daiyin Yin ◽  
Shuang Song ◽  
Qi Xu ◽  
Kai Liu
Keyword(s):  
Molecular Weight ◽  
Control System ◽  
High Molecular Weight ◽  
Low Molecular Weight ◽  
Low Permeability ◽  
Chromium Ion ◽  
Oil Displacement ◽  
Profile Control ◽  
Deep Profile ◽  
Plugging Performance

The matrix/fracture conductivity of a fractured low-permeability reservoir is variable, and its heterogeneity is serious. When carrying out deep profile control measures, it is difficult to inject under the premise of ensuring the plugging effect. According to the characteristics of the fractured low-permeability reservoir in Chaoyanggou Oilfield, the polymer/chromium ion deep profile control system was optimized via a viscosity evaluation experiment, liquidity experiment and oil displacement experiment. The experimental results show that the high molecular weight main agent/low concentration system and low molecular weight main agent/high concentration system can meet the gel strength requirement. The evaluation results of the injection ability and plugging performance of the fractured low-permeability core show that a high molecular weight profile control system is difficult to inject, while a low molecular weight profile control system has a poor plugging performance and high cost after simulated shear. Therefore, the formulation of the profile control system was determined to be a polymer with a molecular weight of 16 million g·mol−1 as the main agent with a concentration of 1000–1500 mg·L−1. As assisting agents, the concentrations of thiourea, NaCl and NaHCO3 were 900 mg·L−1, 800 mg·L−1 and 700 mg·L−1, respectively. The plugging rate of the system was 87.6%, and the resistance coefficient was 19.2. Finally, a fractured low-permeability core model with parallel long cores was designed, and the optimal profile control system was used for the core oil-displacement experiment. Compared with the water-flooding experiment, the plugging rate can be increased by 6.9–8.0%.

Study of crosslinked copolymer nanospheres with temperature resistance, salinity resistance, and deep profile control

2017 ◽  
Vol 134 (40) ◽  
pp. 45131 ◽  
Author(s):  
Ming Zhou ◽  
Xincheng Nie ◽  
Lei Zhou ◽  
Liutong Hou ◽  
Jinzhou Zhao ◽  
...  
Keyword(s):  
Temperature Resistance ◽  
Profile Control ◽  
Deep Profile ◽  
Salinity Resistance

Study on Influence of Injection Method on the Effect of Oil Displacement of Nanometer Microspheres

2013 ◽  
Vol 734-737 ◽  
pp. 1272-1275
Author(s):  
Ji Hong Zhang ◽  
Zhi Ming Zhang ◽  
Xi Ling Chen ◽  
Qing Bin He ◽  
Jin Feng Li
Keyword(s):  
Oil Recovery ◽  
Experimental Result ◽  
Displacement Efficiency ◽  
Oil Displacement ◽  
Profile Control ◽  
Oil Displacement Efficiency ◽  
Injection Methods ◽  
The One ◽  
Deep Profile ◽  
Enhance Oil Recovery

Nanometer microspheres injection is a new deep profile control technology. Nanometer microspheres could inflate with water, resulting in plugging step by step in reservoirs, which could improve the swept efficiency in the reservoir and enhance oil recovery. By using non-homogeneous rectangular core, oil displacement efficiency experiment was conducted for studying the influence of different injection methods on the effect of injection nanometer microspheres. The experimental result shows that, compared with development effect of single-slug injection or triple-slug injection, the one of double-slug injection is better. Nanometer microspheres can enhance oil recovery significantly in medium and low permeability reservoir.

Improvement Research of Organic Phenolic Gel being Used to be an Organic Deep Profile Control Agent

2014 ◽  
Vol 908 ◽  
pp. 46-50
Author(s):  
Yu Li Liu ◽  
Yi Qin
Keyword(s):  
Crosslinking Agent ◽  
Gelation Time ◽  
High Water ◽  
Salt Resistance ◽  
Control Agent ◽  
Water Soluble ◽  
Water Control ◽  
Profile Control ◽  
Weak Gel ◽  
Deep Profile

Organic phenolic gel is commonly used to be a deep profile control agent which applies to use in the high water cut oilfields where heterogeneity is severe, improve the contradiction of inter-reservoir layer and inner layer, expand water sweeping zone, and achieve the purpose of stable oil production and water control. Organic phenolic weak gel is mainly affected by the concentration of each component and reaction temperature. In this paper, formaldehyde was replaced by urotropin, which is not only delaying the gelation time, but also avoiding pollution. In addition, a water-soluble phenolic resin oligomer has been synthesized by the method of two-step alkali catalysis with appropriate mole ratio as an auxiliary crosslinking agent. Considering the concentration of each reactant as the factor, the orthogonal experiments have been designed to optimize the traditional organic HPAM-phenolic weak gel. We have found that the optimized weak gel has a better stability, longer gelation time, better salt resistance and environment friendly. It can better meet the needs of oilfield deep profile control.

Sign in / Sign up

Export Citation Format

Share Document