scholarly journals Formulation and evaulation of triazolam odts by direct compression forselection & optimization of super disintegrates

2021 ◽  
pp. 36-45
Author(s):  
Sudhakar Kancharla ◽  
Prachetha Kolli ◽  
Dr.K.Venkata Gopaiah
Keyword(s):  
Geriatric Patients ◽  
Methyl Cellulose ◽  
The Other ◽  
Direct Compression ◽  
Solvent Casting ◽  
Compression Method ◽  
Casting Method ◽  
Disintegration Time ◽  
Sodium Starch Glycolate ◽  
Croscarmellose Sodium

Oral Disintegrating Tablets of Triazolam were formulated with an aim to improve the versatility, patient compliance, and accurate dosing. The formulations ere developed with an objective to use by the pediatric and geriatric patients. Triazolam Oral Disintegrating Tablets were prepared by direct compression method using cross povidone, croscarmellose sodium, sodium starch  glycolate and combinations of CP+CCS, and CP + SSG as super disintegrates exhibited good pre-formulation and tableting properties of three super disintegrates, the formulation contained combination of CP + CCS showed better performance in terms of disintegration time when compared to other formulations. Order of the super disintegrates activity is as follows. (CP + CCS) > (CP + SSG) > CP > CCS >SSG The formulation F15 was found to be the best among all twenty Triazolam ODT formulations because it has exhibited faster disintegration time (17.66 sec) when compared to the other formulations and it showed 99.87±0.18% drug release at the end of 25 min. Triazolam Oral Disintegrating Films were prepared by solvent casting method using different grades of Hydroxypropyl Methyl Cellulose like HPMC – E15, HPMC – 5cps, HPMC – 50cps. Based on disintegration and dissolution results it was concluded that the formulation F15 contained CP 5% + CCS 5% was the best formulation among all otherformulations.

Formulation and Evaluation of Sumatriptan Succinate Fast Disintegrating Films and Tablets

2013 ◽  
Vol 6 (2) ◽  
pp. 2087-2096
Author(s):  
Y. Shravan Kumar ◽  
R Gowthami ◽  
Sujitha H ◽  
Nagaraju T ◽  
Rajashekar M ◽  
...  
Keyword(s):  
In Vitro Dissolution ◽  
Direct Compression ◽  
Solvent Casting ◽  
Compression Method ◽  
Casting Method ◽  
Disintegration Time ◽  
Sumatriptan Succinate ◽  
Film Forming ◽  
Fast Disintegrating Tablets

Sumatriptan succinate is a 5-HT1B/1D receptor agonist which has well established efficacy in treating migraine. The main objective of the study was to formulate Oral Fast Disintegrating Films (ODF) and Oral Fast Disintegrating Tablets (ODT) to achieve a better dissolution rate and further improving the bioavailability of the drug.  ODFs were prepared by solvent casting method using film forming polymers like HPMC – E15,5cps,50cps in different ratios & prepared batches of films were evaluated for the drug content, film thickness, disintegration time  and in vitro dissolution studies. Among the prepared formulation F7 containing HPMC – 50cps (drug: polymer ratios = 1:1) was found to be best formulations which releases 98.2±1.1of the drug within 17±0.02 sec. ODTs prepared by direct compression method using in different concentrations of super-disintegrants. The prepared formulation T12 (combination of disintegrants) containing CP + CCS (6%) was considered to be the best formulation, which releases up to 100±0.38% of the drug in 23±0.75 sec, respectively. Based on these results, it is suggested that ODFs have faster disintegration time and drug release than ODTs.  

scholarly journals Formulation, Characterization and In-vitro Evaluation of Cetrizine HCL Oral Disintegrating Tablets

1970 ◽  
Vol 7 (5) ◽  
pp. 19-24
Author(s):  
HARITHA PASUPULATI ◽  
Y PHALGUNA ◽  
SANDHYA RUDRA
Keyword(s):  
Bulk Density ◽  
Direct Compression ◽  
Compression Method ◽  
Disintegration Time ◽  
Sodium Starch Glycolate ◽  
Weight Variation ◽  
Wetting Time ◽  
Croscarmellose Sodium ◽  
In Vitro Disintegration

The main objective of this work is to formulate and evaluate Cetirizine HCl MFDT’s using different concentrations of superdisintegrants like croscarmellose sodium (CCS), sodium starch glycolate (SSG) and their combinations in different ratios. The in vitro disintegration time of Cetrizine Hcl prepared by direct compression method by super disintegrates were found to be in the range of 18 to 11sec fulfilling the official requirements. The bulk density and tapped bulk density for the entire formulation blend varied from 0.508 gm/cc to 0.5438 gm/cc and 0.5941 to 0.6408 respectively. The friability was found in all designed formulations in the range 0.42 to 0.74% to be well within the approved range (<1%). The weight variation was found in all designed formulation in the range 97 to 102 mg. The wetting time were found to be in the range of 11 to 18sec. Water absorption ratio for all the formulations found in the range 11 to 16%.combination of sodium starch glycolate and cross carmellose sodium (6% of 25%-ssg&75%ccs)) promotes dissolution rate of drug release when compared to formulation of SSG & CCS alone. It may be due to capillary and wicking mechanism of SSG & CCS.   Keywords:   

scholarly journals FORMULATION AND EVALUATION OF FAST DISSOLVING FILMS OF ELETRIPTAN HYDROBROMIDE

2017 ◽  
Vol 9 (2) ◽  
pp. 59
Author(s):  
K. Pallavi ◽  
T. Pallavi
Keyword(s):  
Drug Release ◽  
Xanthan Gum ◽  
Guar Gum ◽  
Methyl Cellulose ◽  
Synthetic Polymers ◽  
Locust Bean Gum ◽  
Solvent Casting ◽  
Casting Method ◽  
Disintegration Time ◽  
Locust Bean

Objective: The main aim of the present research was to develop an oral fast dissolving polymeric film (FDF) with good mechanical properties, faster disintegration and dissolution when placed on the tongue.Methods: Eletriptan hydrobromide is prescribed for the treatment of mild to a moderate migraine. The polymers selected for preparing films were Pullulan, Maltodextrin (MDX), Acacia, Sodium alginate (SA), Locust bean gum (LBG), Guar gum (GG), Xanthan gum (XG), Polyvinyl alcohol (PVA), Polyvinyl pyrrolidine (PVP), Hydroxyl propyl methyl cellulose (HPMC) E5, and HPMC E15. Twelve sets of films FN1–FN12 were prepared by solvent casting method with Pullulan and combination of Acacia, MDX, SA, LBG, GG, XG, PVA, PVP, HPMC E5 and HPMC E15. Five sets of films FS1–FS5 were prepared using synthetic polymers like PVA, PVP, HPMC E5 and HPMC E15.Results: From all the prepared polymer formulations, FN2, FN8, and FS3 were selected based on disintegration time, and drug release and amongst this three FN2 was optimised based on its disintegration time (D. T). The percent drug release of the optimised film was compared with the percent release of the pure drug.Conclusion: The optimised formulation had a D. T of 16 s and a percent drug release of 97.5% in 10 min in pH 6.8 phosphate buffer and 100.6% drug release in 10 min in 0.1N HCl.

scholarly journals DESIGN, OPTIMIZATION AND EVALUATION OF ACECLOFENAC FAST DISSOLVING TABLETS EMPLOYING STARCH VALERATE–A NOVEL SUPERDISINTEGRANT

2021 ◽  
pp. 168-176
Author(s):  
R. SANTOSH KUMAR ◽  
SHAMBHAVI KANDUKURI ◽  
M. RAMYA ◽  
B. KUSUMA LATHA
Keyword(s):  
Factorial Design ◽  
Immediate Release ◽  
Compression Method ◽  
Disintegration Time ◽  
23 Factorial Design ◽  
Sodium Starch Glycolate ◽  
Wetting Time ◽  
Croscarmellose Sodium ◽  
Dissolution Efficiency

Objective: To synthesize, characterize and evaluate starch valerate as a superdisintegrant in the formulation of aceclofenac fast dissolving tablets by employing 23 factorial design. Methods: Starch valerate was synthesized and its physical and micromeritic properties were performed to evaluate it. The fast dissolving tablet of aceclofenac was prepared by employing starch valerate as a superdisintegrant in different proportions in each case by direct compression method using 23 factorial design for evaluation of tablet parameters like disintegration and dissolution efficiency in 5 min. Results: The starch valerate prepared was found to be fine, amorphous and free flowing. Starch valerate exhibited good swelling in water with swelling index (125.2%). The study of starch valerate was shown by fourier transform infrared spectra (FTIR). The drug content (200±5%), hardness (3.5–4 kg/sq. cm), and friability (<0.15%) has been effective with regard to all the formulated fast dissolving tablets employing starch valerate. The disintegration time of all the formulated tablets was found to be in the range of 14±0.04 to 25.7±0.02 sec. The optimized formulation F4 had the least disintegration time i.e., 12.8±0.02 sec. The wetting time of the tablets was found to be in the range of 76±0.21 to 217±0.17s. The In vitro wetting time was less (i.e., 28±0.02s) in optimized formulation F4. The water absorption ratio of the formulated tablets was found to be in the range of 46±0.12 to 100±0.27%. The percent drug dissolved in the optimized formulation F8 was found to be 99.93% in 5 min. Conclusion: Starch valerate, when combined with sodium starch glycolate, croscarmellose sodium, with aceclofenac, was found to be an effective super disintegrant which improved the dissolution efficiency and could therefore be used in the formulation of quick dissolving tablets to provide immediate release of the contained drug within 5 min.

scholarly journals Formulation and Evaluation of Rapimelt Tablet of Anti-Vertigo Drug (Lorazepam)

2020 ◽  
Vol 13 (4) ◽  
pp. 341-349
Author(s):  
B. M. Kadu ◽  
S. Bhasme ◽  
R. D. Bawankar ◽  
D. R. Mundhada
Keyword(s):  
Rapid Onset ◽  
Dissolution Time ◽  
Direct Compression ◽  
Compression Method ◽  
Onset Of Action ◽  
Disintegration Time ◽  
Sodium Starch Glycolate ◽  
Ft Ir ◽  
Wetting Time ◽  
Mouth Feel

A. Rapimelt tablet of Lorazepam was prepared by direct compression method using Indion 414, Cross Carmellose Sodium and sodium starch glycolate as superdisintegrants with aim to get rapid onset of action, improve bioavailability and to give pleasant taste and better mouth feel. The tablets prepared were evaluated for various parameters like various density parameters, thickness, hardness, friability, disintegration time, wetting time and invitro dissolution time and were found to be within limits as per Indian Pharmacopoeia. FT-IR spectra of physical mixture of Lorazepam with Indion 414showedretention of basic peaks of Lorazepam. The developed formulation of Lorazepam batch F5 (10% Indion 414) showed good palatability and dispersed within 30 seconds as compared to Crosscarmellose Sodium batches F1-F3 and Sodium starch glycolate batches F6-F9.

scholarly journals Stability studies of hydralazine hydrochloride orodispersible formulations

2020 ◽  
Vol 11 (1) ◽  
pp. 75-86
Author(s):  
Muthukumar ◽  
Sundaraganapathy R ◽  
Sankar C ◽  
Sundaramoorthy C ◽  
Yuvaraja K R
Keyword(s):  
Thin Films ◽  
Age Groups ◽  
Direct Compression ◽  
Solvent Casting ◽  
Compression Method ◽  
Casting Method ◽  
Onset Of Action ◽  
Solid Dosage ◽  
Sublimation Method ◽  
Hydralazine Hydrochloride

Solid dosage forms also have a impervious difficulties in patients especially for geriatric and paediatric patients.Dysphagia is common among all age groups. Orodispersible formulations (Fast  dissolving tablets & Fast dissolving oral thin films) constitute an inventive dosage form that overcome the problems swallowing and provides speedy onset of action. The objective of present study was to formulate orodispersible formulations of Hydralazine HCL by different methods (Direct compression method, Sublimation method and solvent casting method). Based on physiochemical evaluations F9 (Direct compression method),SF9 (Sublimation method) for Fast dissolving tablets and H2 formulations (Solvent casting method) for Fast dissolving oral thin films were found optimized formula.The optimized formula were kept for stability under long term, accelerated and intermediate conditions for the study period of six months as per ICH guidelines.Based on stability reports the H2 formulations (Fast dissolving oral thin films) got a better drug release than Fast dissolving tablets.

scholarly journals OPTIMIZATION OF STARCH CROTONATE AS A NOVEL SUPERDISINTEGRANT IN THE FORMULATION OF FAST DISSOLVING TABLETS THROUGH 23 FACTORIAL DESIGN

2021 ◽  
pp. 247-256
Author(s):  
A. HARI OM PRAKASH RAO ◽  
SANTOSH KUMAR RADA ◽  
SHAMBHAVI KANDUKURI
Keyword(s):  
Factorial Design ◽  
Immediate Release ◽  
Compression Method ◽  
Disintegration Time ◽  
23 Factorial Design ◽  
Sodium Starch Glycolate ◽  
Wetting Time ◽  
Croscarmellose Sodium ◽  
Dissolution Efficiency

Objective: To synthesize, characterize and evaluate starch crotonate as a superdisintegrant in the formulation of Piroxicam fast dissolving tablets by employing 23 factorial design. Methods: Starch crotonate was synthesized and its physical and micromeritic properties were performed to evaluate it. The fast dissolving tablet of Piroxicam were prepared by employing starch crotonate as a superdisintegrant in different proportions in each case by direct compression method using 23 factorial design. Results: The starch chrotonate prepared was found to be fine, free flowing and amorphous. Starch crotonate exhibited good swelling in water with swelling index (50%). The study of starch crotonate was shown by fourier transform infrared spectra (FTIR). The drug content (100±5%), hardness (3.6–4 kg/sq. cm), and friability (<0.15%) have been effective with regard to all the formulated fast dissolving tablets employing starch crotonate. The disintegration time of all the formulated tablets was found to be in the range of 18±03 to 66±03 sec. The optimized formulation F8 had the least disintegration time i.e., 18±03 sec. The wetting time of the tablets was found to be in the range of 49.92±0.11 to 140±0.18s. The In vitro wetting time was less (i.e., 74±0.37s) in optimized formulation F8. The water absorption ratio of the formulated tablets was found to be in the range of 27.58±0.01 to 123.07±0.33%. The percent drug dissolved in the optimized formulation F8 was found to be 99.83% in 10 min. Conclusion: Starch crotonate, when combined with sodium starch glycolate, croscarmellose sodium, with Piroxicam was found to be an effective super disintegrant which improved the dissolution efficiency and could therefore be used in the formulation of quick dissolving tablets to provide immediate release of the contained drug within 10 min.

scholarly journals Overcoming Poor Solubility of Dimenhydrinate: Development, Optimization and Evaluation of Fast Dissolving Oral Film

2018 ◽  
Vol 8 (4) ◽  
pp. 721-725 ◽  
Author(s):  
Yuvraj Govindrao Jadhav ◽  
Upendra Chandrakant Galgatte ◽  
Pravin Digambar Chaudhari
Keyword(s):  
Pediatric Population ◽  
Solvent Casting ◽  
Casting Method ◽  
Polyethylene Glycol 400 ◽  
Disintegration Time ◽  
Surface Ph ◽  
Peg 400 ◽  
Sodium Saccharin ◽  
Croscarmellose Sodium ◽  
Oral Films

Purpose: To develop fast dissolving oral film to address vomiting and nausea in pediatric population. Methods: Oral films of Dimenhydrinate were prepared by solvent casting method by using hydroxypropylmethyl cellulose E5 (HPMC E5), polyethylene glycol 400 (PEG 400) and croscarmellose sodium. Solubility of dimenhydrinate was enhanced by ethanol as a co-solvent. To make dimenhydrinate palatable sodium saccharin and peppermint oil were used. All films were evaluated for mechanical parameters, surface pH, morphology, disintegration time and percent dissolution. Results: Films were smooth, acceptable and white in colour. For optimized batch, drug content (99.106%), disintegration time (25 sec), dissolution (99.10% in 210 sec), surface pH (6.81) were acceptable. Conclusion: Optimized batch, due to its potential to deliver through fast dissolving film, can be developed for clinical use.

scholarly journals OPTIMIZATION OF STARCH GLYCOLATE AS NOVEL SUPERDISINTEGRANT IN THE FORMULATION OF GLIPIZIDE FAST DISSOLVING TABLETS THROUGH 23FACTORIAL DESIGN

2021 ◽  
pp. 244-251
Author(s):  
A. HARI OM PRAKASH RAO ◽  
R. SANTOSH KUMAR ◽  
SHAMBHAVI KANDUKURI ◽  
M. RAMYA
Keyword(s):  
Direct Compression ◽  
Factorial Designs ◽  
Therapeutic Action ◽  
Compression Method ◽  
Disintegration Time ◽  
23 Factorial Design ◽  
Sodium Starch Glycolate ◽  
Wetting Time ◽  
Dissolution Efficiency

Objective: To synthesize, characterize and evaluate starch glycolate as a superdisintegrant in the formulation of Glipizide fast dissolving tablets by employing 23 factorial designs. Methods: Starch glycolate was prepared and its physical and micromeritic properties were performed to evaluate it. The fast dissolving tablet of Glipizide was prepared by employing starch crotonate as a superdisintegrant in different proportions in each case by direct compression method using 23 factorial design for the evaluation of tablet parameters like disintegration and dissolution efficiency in 5 min. Results: The starch glycolate prepared was found to be fine, free-flowing and amorphous. Starch glycolate exhibited good swelling in water with a swelling index (10%). The study of starch glycolate was shown by fourier transform infrared spectra (FTIR). The drug content (100±5%), hardness (3.5–4 kg/sq. cm), and friability (<0.15%) was been effective with regard to all the formulated fast dissolving tablets employing starch glycolate. The disintegration time of all the formulated tablets was found to be in the range of 13±0.015 to 180±0.014 sec. The optimized formulation F8 had the least disintegration time i.e., 13±0.015 sec. The wetting time of the tablets was found to be in the range of 8±0.015 to 95±0.013 sec. The In vitro wetting time was less (i.e., 8±0.015s) in optimized formulation F8. The water absorption ratio of the formulated tablets was found to be in the range of 75±0.012 to 150±0.014%. The percent drug dissolved in the optimized formulation F8 was found to be 99.95% in 5 min. Conclusion: Starch glycolate was an efficient superdisintegrant for fast-dissolving tablets. The disintegration and dissolution efficiency of the fast dissolving tablets of glipizide was good and depended on the concentration of superdisintegrant employed i.e., starch glycolate, sodium starch glycolate, crospovidone. The formulated fast dissolving tablets of glipizide exhibited good dissolution efficiency in 5 min which can be used for the fast therapeutic action of glipizide.

scholarly journals FORMULATION AND EVALUATION OF FAST DISSOLVING TABLET OF APREPITANT BY USING NATURAL AND SYNTHETIC SUPERDISINTEGRANTS

2019 ◽  
pp. 64-71
Author(s):  
RAJNI BALA ◽  
SHAILESH SHARMA ◽  
IKGPTU
Keyword(s):  
Compression Method ◽  
Onset Of Action ◽  
Disintegration Time ◽  
Sodium Starch Glycolate ◽  
First Pass Metabolism ◽  
First Pass ◽  
Croscarmellose Sodium ◽  
Improve Patient ◽  
Pass Metabolism ◽  
Natural And Synthetic

Objective: The present study was aimed to formulate fast dissolving tablets (FDTs) of Aprepitant (APT) using natural and synthetic superdisintegrants with the desired onset of action, increased bioavailability by reducing the frequency of dosage and also reduce the first-pass metabolism of the drug. Methods: In this research, the gum isolated from cordia dichotoma was investigated as super disintegrants in fast dissolving tablets (FDTs). The aprepitant tablets were prepared separately using cordia dichotoma (natural), sodium starch glycolate and croscarmellose sodium (synthetic) as superdisintegrants by direct compression method. The tablets were evaluated for various precompression and post-compression parameters. Results: The optimized formulation (APT F3) of cordia dichotoma (8%) showed satisfactory physicochemical properties, minimum disintegration time (34 seconds) and highest dissolution rate (86.52%) in 10 min than the other synthetic superdisintegrants. Also, the pharmacokinetic study of the optimized formulation showed effective results as compared with marketed product of aprepitant. Conclusion: The developed formulation can improve the onset of action as well as improve patient compliance.

Sign in / Sign up

Export Citation Format

Share Document