Preliminary Investigation of Utilization of a Cellulose-Based Polymer in Enhanced Oil Recovery by Oilfield Anaerobic Microbes and its Impact on Carbon Steel Corrosion

CORROSION ◽  
10.5006/3476 ◽  
2020 ◽  
Vol 76 (8) ◽  
pp. 766-772
Author(s):  
Dongqing Yang ◽  
Ru Jia ◽  
Hasrizal Bin Abd Rahman ◽  
Tingyue Gu

Water injection increases reservoir pressure in enhanced oil recovery (EOR). Among other oilfield performance chemicals, an EOR polymer is added to the injection water to provide the viscosity necessary for effective displacement of viscous crude oil from the reservoir formation. However, these organic macromolecules may be degraded by microbes downhole, causing undesirable viscosity loss. The organic carbon utilization by the microbes promotes microbial metabolism, thus potentially exacerbating microbiologically influenced corrosion (MIC). In this preliminary laboratory investigation, 3,000 ppm (w/w) carboxymethyl cellulose sodium (CMCS), a commonly used EOR polymer, was found to be utilized by an oilfield biofilm consortium. This oilfield biofilm consortium consisted of bacteria (including that can degrade large organic molecules), sulfate-reducing bacteria (SRB), and other microorganisms. A 30-day incubation in 125 mL anaerobic vials was conducted with an artificial seawater medium without yeast extract and lactate supplements at 37°C. The polymer biodegradation led to 16% viscosity loss in the broth and a 30× higher SRB sessile cell count. Slightly increased MIC weight loss and pitting corrosion were observed on C1018 carbon steel coupons. Thus, the use of CMCS in EOR should take into the consideration of microbial degradation and its impact on MIC.

Fuel ◽  
2019 ◽  
Vol 237 ◽  
pp. 1086-1107 ◽  
Author(s):  
Cleverson Esene ◽  
Nima Rezaei ◽  
Amer Aborig ◽  
Sohrab Zendehboudi

2014 ◽  
Author(s):  
C. L. Delgadillo-Aya ◽  
M.L.. L. Trujillo-Portillo ◽  
J.M.. M. Palma-Bustamante ◽  
E.. Niz-Velasquez ◽  
C. L. Rodríguez ◽  
...  

Abstract Software tools are becoming an important ally in making decisions on the development or implementation of an enhanced oil recovery processes from the technical, financial or risk point of view. This work, can be manually developed in some cases, but becomes more efficient and precise with the help of these tools. In Ecopetrol was developed a tool to make technical and economic evaluation of enhanced oil recovery processes such as air injection, both cyclic and continuous steam injection, and steam assisted gravity drainage (SAGD) and hot water injection. This evaluation is performed using different types of analysis as binary screening, analogies, benchmarking, and prediction using analytical models and financial and risk analysis. All these evaluations are supported by a comprehensive review that has allowed initially find favorable conditions for different recovery methods evaluated, and get a probability of success based on this review. Subsequently, according to the method can be used different prediction methods, given an idea of the process behavior for a given period. Based on the prediction results, it is possible to feed the software to generate a financial assessment process, in line with cash flow previously developed that incorporates all the elements to be considered during the implementation of a project. This allows for greater support to the choice or not the application of a method. Finally the tool to evaluate the levels of risks that outlines the development of the project based on the existing internal methodology in the company, identifying the main and level of criticality and define actions for prevention, mitigation and risk elimination.


2021 ◽  
Author(s):  
Abiola Oyatobo ◽  
Amalachukwu Muoghalu ◽  
Chinaza Ikeokwu ◽  
Wilson Ekpotu

Abstract Ineffective methods of increasing oil recovery have been one of the challenges, whose solutions are constantly sought after in the oil and gas industry as the number of under-produced reservoirs increases daily. Water injection is the most extended technology to increase oil recovery, although excessive water production can pose huge damage ranging from the loss of the well to an increase in cost and capital investment requirement of surface facilities to handle the produced water. To mitigate these challenges and encourage the utilization of local contents, locally produced polymers were used in polymer flooding as an Enhanced Oil Recovery approach to increase the viscosity of the injected fluids for better profile control and reduce cost when compared with foreign polymers as floppan. Hence this experimental research was geared towards increasing the efficiency of oil displacement in sandstone reservoirs using locally sourced polymers in Nigeria and also compared the various polymers for optimum efficiency. Starch, Ewedu, and Gum Arabic were used in flooding an already obtained core samples and comparative analysis of this shows that starch yielded the highest recovery due to higher viscosity value as compared to Ewedu with the lowest mobility ratio to Gum Arabic. Finally, the concentration of Starch or Gum Arabic should be increased for optimum recovery.


Author(s):  
Mehran Sohrabi ◽  
Masoud Riazi ◽  
Mahmoud Jamiolahmady ◽  
Shaun Ireland ◽  
Christopher Brown

2013 ◽  
Author(s):  
Chiara Callegaro ◽  
Martin Bartosek ◽  
Franco Masserano ◽  
Marianna Nobili ◽  
Valerio Parasiliti Parasiliti Parracello ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document