Sustainable pulpwood production from fast-growing tree plantations is needed for pulp and paper industries. To increase the pulpwood production efficiency, the anatomical characteristics and derived-wood properties of 75 trees from 15 half-sib families of Eucalyptus camaldulensis Dehnh. planted in Thailand were investigated, and then the family was classified by suitability of wood as raw material for pulp and paper products using principal component analysis and clustering. The mean values of vessel diameter, vessel frequency, fibre diameter, fibre lumen diameter, and fibre wall thickness at 2 cm from the cambium were 128 µm, 16 no./mm2, 11.1 µm, 7.1 µm, and 1.88 µm, respectively. In addition, the Runkel ratio, Luce’s shape factor, flexibility coefficient, slenderness ratio, solids factor, and wall coverage ratio (i.e., derived-wood properties) were 0.53, 0.42, 0.64, 85.3, 68 × 103 µm3, and 0.34, respectively. Significant differences in fibre diameter, fibre lumen diameter, and Runkel ratio were found among families. Although significant differences among families were not found for other anatomical characteristics and derived-wood properties, the p-values obtained by an analysis of variance test ranged from 0.050 to 0.088. Based on the results of a principal component analysis and cluster analysis, 15 families were classified into four clusters with different expected pulp and paper characteristics. The suitability of wood from E. camaldulensis half-sib families for pulp and paper can be evaluated by principal component analysis using anatomical characteristics and physical properties as variables. Based on the results, desirable pulp and paper quality may be obtained through the selection of families from this species.
EARLY SELECTION IN MATERNAL HALF-SIB FAMILIES OF HUSK TOMATO OF PUEBLA RACE