scholarly journals STUDY OF PHASES IN CRYSTALLINE SENTENCES

2020 ◽  
Vol 2 (1) ◽  
pp. 26-29
Author(s):  
Oyewole Dipeolu
Keyword(s):  
Solid Solution ◽  
Phase Equilibrium ◽  
Physical Properties ◽  
Necessary Conditions ◽  
The Other ◽  
Molar Ratios ◽  
Limited Solid Solution ◽  
Calcium Molybdate ◽  
Electro Negativity ◽  
High Electronegativity

The objective of the study was to study the phases in the crystalline sentence of calcium molybdate with sodium metafanadat on the basis of phase equilibrium in binary sentence. For this sutyd, different mixtures are prepared based on different molar ratios and investigation is made about these different mixture physical properties. Finally, the study also draw a phase balanced chart for the studied substances. For methodology adopted, nine samples were prepared. The results shows that to form a solid solution as dissolving sodium metafandate in calcium molybdate up to 40% of sodium metafanadate and form a solid solution in this sentence confirms that the necessary conditions to form a soid solution. It is concluded that for difference less than 15%, unlimited solid solution is formed; whereas, for difference above 15%, limited solid solution is formed. Our conclusion also shows that these two elements solubility is limited where one possesses the characteristic of high electronegativity, while, the other possess the characteristic of low electro negativity.

OLIN ALLOY C4252

Alloy Digest ◽  
2004 ◽  
Vol 53 (8) ◽  
Keyword(s):  
Solid Solution ◽  
Physical Properties ◽  
Tensile Properties

Abstract Olin Alloy C4252 is a dispersion and solid-solution strengthened alloy developed for use in the electronic and automotive connector market. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. Filing Code: CU-720. Producer or source: Olin Brass.

OLIN ALLOY C5218

Alloy Digest ◽  
2004 ◽  
Vol 53 (6) ◽  
Keyword(s):  
Solid Solution ◽  
Physical Properties ◽  
Tensile Properties ◽  
Bend Strength ◽  
Bronze Alloy ◽  
Solid Solution Strengthening ◽  
Solution Strengthening

Abstract Olin Alloy C5218 is a phosphor bronze alloy given both dispersion- and solid-solution strengthening for applications in the automotive connector market. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength. Filing Code: CU-715. Producer or source: Olin Brass.

HAYNES STELLITE ALLOY No. 98M2

Alloy Digest ◽  
1960 ◽  
Vol 9 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Physical Properties ◽  
Room Temperature ◽  
Base Alloy ◽  
Heat Treating ◽  
The Other ◽  
Stellite Alloy ◽  
Cobalt Base Alloy ◽  
Cobalt Base

Abstract HAYNES STELLITE 98M2 Alloy is a cobalt-base alloy having higher compressive strength and higher hardness than all the other cobalt-base alloys at room temperature and in the red heat range. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on heat treating, machining, and joining. Filing Code: Co-22. Producer or source: Haynes Stellite Company.

INCONEL ALLOY 601

Alloy Digest ◽  
1970 ◽  
Vol 19 (4) ◽  
Keyword(s):  
Solid Solution ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Heat Treating ◽  
Solid Solution Alloy ◽  
Process Industries ◽  
Inconel Alloy ◽  
Nickel Chromium

Abstract INCONEL Alloy 601 is a nickel-chromium solid-solution alloy with excellent high-temperature properties which make it attractive for many application in aerospace and process industries. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-152. Producer or source: Huntington Alloy Products Division, An INCO Company.

STOODY 4

Alloy Digest ◽  
1977 ◽  
Vol 26 (4) ◽  
Keyword(s):  
Solid Solution ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Heat Treating ◽  
Tungsten Alloy ◽  
High Temperature Strength ◽  
Cobalt Chromium ◽  
Temperature Performance

Abstract STOODY 4 is a cobalt-chromium-tungsten alloy with excellent high-temperature strength and excellent resistance to corrosion. This alloy derives its high-temperature strength from the high tungsten-to-carbon ratio which allows a large percentage of tungsten to remain in solid solution. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Co-75. Producer or source: WRAP Division, Stoody Company.

PYROMET 538

Alloy Digest ◽  
1970 ◽  
Vol 19 (12) ◽  
Keyword(s):  
Solid Solution ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Oxidation Resistance ◽  
Heat Treating ◽  
Temperature Performance ◽  
Technology Corporation ◽  
Carpenter Technology Corporation

Abstract PYROMET 538 is a solid-solution strengthened, austenitic alloy with a desirable combination of strength, corrosion resistance, oxidation resistance, and economy. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-247. Producer or source: Carpenter Technology Corporation.

PHASE EQUILIBRIUM IN THE AS2TE3-TM2TE3 SYSTEM.

2020 ◽  
Vol 5 (8(77)) ◽  
pp. 65-68
Author(s):  
Teymur Mammad Ilyasly ◽  
Rahman Hasanaga Fatullazade ◽  
Zakir Islam Ismailov ◽  
Nigar Nadir Jafarova
Keyword(s):  
Thermal Analysis ◽  
Solid Solution ◽  
Differential Thermal Analysis ◽  
Phase Equilibrium ◽  
Physicochemical Properties ◽  
Thermal Effects ◽  
Isothermal Annealing ◽  
Intermediate Phase ◽  
Physicochemical Analysis ◽  
Two Phases

The synthesis of alloys of the system was carried out stepwise in rotary furnaces. The synthesis mode was selected based on the physicochemical properties of the elementary components. For homogenization, the alloys were subjected to isothermal annealing at 750 and 1275 K, depending on the Tm2Te3 concentration, for 250 h after homogenization of the alloys, they were subjected to physicochemical analysis. The results of differential thermal analysis showed that reversible thermal effects are observed in the alloys of the system. In alloys in a 1: 1 ratio, a new intermediate phase is formed with a composition corresponding to the TmAsTe3 compound. The homogeneity area is observed in the concentration range 52.5-47.5. It was found that in the concentration range 98.5-52.5 Tm2Te3 there are two phases - a mixture of β and of the solid solution, and in the concentration range of 47.51 mol% Tm2Te3 phases and α are in equilibrium. ) 66 The eutectic has coordinates of 11.5 mol Tm2Te3 at a temperature of 575 K.

Binding of lead and copper(II) cations to hemicelluloses of rye bran

1986 ◽  
Vol 51 (10) ◽  
pp. 2250-2258 ◽  
Author(s):  
Rudolf Kohn ◽  
Zdena Hromádková ◽  
Anna Ebringerová
Keyword(s):  
Uronic Acid ◽  
Equilibrium Solution ◽  
Glucuronic Acid ◽  
The Other ◽  
Carboxyl Groups ◽  
Stoichiometric Ratio ◽  
Molar Ratios ◽  
Free Ions ◽  
Uronic Acid Content ◽  
The Relationship

Several fractions of acid hemicelluloses isolated from rye bran were characterized by molar ratios of saccharides (D-Xyl, L-Ara, D-Glc, D-Gal) and 4-O-methyl-D-glucuronic acid and protein content. Binding of Pb2+ and Cu2+ ions to these acid polysaccharides was considered according to function (M)b = f([M2+]f), expressing the relationship between the amount of metal (M)b bound to 1 g of the substance and the concentration of free ions [M2+]f in the equilibrium solution and according to the association degree β of these cations with carboxyl groups of uronic acid at a stoichiometric ratio of both components in the system under investigation. Acid hemicelluloses contained only a very small portion of uronic acid ((COOH) 0.05-0.18 mmol g-1); the model polysaccharide, 4-O-methyl-D-glucurono-D-xylan of beech, was substantially richer in uronic acid content ((COOH) 0.73 mmol g-1). Consequently, the amount of lead and copper bound to acid hemicelluloses is very small ((M)b 0.017-0.025 mmol g-1) at [M2+]f = 0.10 mmol l-1. On the other hand, much greater amount of cations ((M)f 0.09-0.10 mmol g-1) was bound to the glucuronoxylan. The association degree β was like with the majority of samples (β = 0.31-0.38). The amount of lead and copper(II) bound to acid hemicelluloses from rye bran is several times lower than that bound to dietary fiber isolated from vegetables (cabbage, carrot), rich in pectic substances.

scholarly journals IX. The electric conductivity of nitric acid

1898 ◽  
Vol 191 ◽  
pp. 365-398 ◽  
Keyword(s):  
Nitric Acid ◽  
Physical Properties ◽  
Nitrous Acid ◽  
Internal Resistance ◽  
The Other ◽  
Reasonable Degree ◽  
Mineral Acids ◽  
Artificial Illumination ◽  
The Subject ◽  
Deep Green

Of the commoner mineral acids the chemical changes of Nitric Acid, from their evident complexity, have formed the subject of numerous memoirs, while those of sulphuric acid, from their assumed simplicity, have been to some degree neglected; on the other hand, the physical properties of the latter have been studied with considerable elaboration, while those of the former have been passed over, doubtless on account of the corrosive nature of the acid and the difficulty of preparing and preserving it in a reasonable degree of purity. Further, with certain exceptions, the alterations in physical properties induced by the products of reduction, be they nitrogen peroxide or nitrous acid, either singly or conjointly, have attracted but little attention, though it is a common matter of observation that the current intensity of a Grove’s or other cell containing nitric acid remains constant, even though the fuming acid, originally colourless or red, has become of a deep green tint. It is more than probable that of the factors of Ohm’s law, both the E. M. F. and internal resistance are continually varying. At the earliest stages of the enquiry it was found that the passage of a few bubbles of nitric oxide gas into a considerable volume of nitric acid produced an alteration of one percent, in the resistance, and the same result could be effected to a less degree by exposure to sunlight, and to a still less degree by exposure to artificial illumination. Therefore, we determined to investigate the alterations of conductivity produced by changes of concentration and temperature in samples of acid purified with necessary precautions, more especially as former workers upon the subject have either used samples of acid confessedly impure, or have been silent as to any method of purification, or have adopted no special care in dealing with a substance so susceptible of polarisation.

Sign in / Sign up

Export Citation Format

Share Document