scholarly journals Evidence for a significant proportion of Secondary Organic Aerosol from isoprene above a maritime tropical forest

2011 ◽  
Vol 11 (3) ◽  
pp. 1039-1050 ◽  
Author(s):  
N. H. Robinson ◽  
J. F. Hamilton ◽  
J. D. Allan ◽  
B. Langford ◽  
D. E. Oram ◽  
...  
Keyword(s):  
Secondary Organic Aerosol ◽  
Significant Proportion ◽  
Organic Aerosol ◽  
Oxidation Products ◽  
Emission Region ◽  
Experimental Chamber ◽  
Mass Spectral ◽  
Aerosol Mass ◽  
Isoprene Oxidation ◽  
Highly Correlated

Abstract. Isoprene is the most abundant non-methane biogenic volatile organic compound (BVOC), but the processes governing secondary organic aerosol (SOA) formation from isoprene oxidation are only beginning to become understood and selective quantification of the atmospheric particulate burden remains difficult. Organic aerosol above a tropical rainforest located in Danum Valley, Borneo, Malaysia, a high isoprene emission region, was studied during Summer 2008 using Aerosol Mass Spectrometry and offline detailed characterisation using comprehensive two dimensional gas chromatography. Observations indicate that a substantial fraction (up to 15% by mass) of atmospheric sub-micron organic aerosol was observed as methylfuran (MF) after thermal desorption. This observation was associated with the simultaneous measurements of established gas-phase isoprene oxidation products methylvinylketone (MVK) and methacrolein (MACR). Observations of MF were also made during experimental chamber oxidation of isoprene. Positive matrix factorisation of the AMS organic mass spectral time series produced a robust factor which accounts for an average of 23% (0.18 μg m−3), reaching as much as 53% (0.50 μg m−3) of the total oraganic loading, identified by (and highly correlated with) a strong MF signal. Assuming that this factor is generally representative of isoprene SOA, isoprene derived aerosol plays a significant role in the region. Comparisons with measurements from other studies suggest this type of isoprene SOA plays a role in other isoprene dominated environments, albeit with varying significance.

scholarly journals Evidence for a significant proportion of Secondary Organic Aerosol from isoprene above a maritime tropical forest

2010 ◽  
Vol 10 (11) ◽  
pp. 25545-25576 ◽  
Author(s):  
N. H. Robinson ◽  
J. F. Hamilton ◽  
J. D. Allan ◽  
B. Langford ◽  
D. E. Oram ◽  
...  
Keyword(s):  
Secondary Organic Aerosol ◽  
Significant Proportion ◽  
Organic Aerosol ◽  
Oxidation Products ◽  
Emission Region ◽  
Experimental Chamber ◽  
Mass Spectral ◽  
Aerosol Mass ◽  
Isoprene Oxidation ◽  
Highly Correlated

Abstract. Isoprene is the most abundant non-methane biogenic volatile organic compound (BVOC), but the processes governing secondary organic aerosol (SOA) formation from isoprene oxidation are only beginning to become understood and selective quantification of the atmospheric particulate burden remains difficult. Organic aerosol above a tropical rainforest located in Danum Valley, Borneo, Malaysia, a high isoprene emission region, was studied during Summer 2008 using Aerosol Mass Spectrometry and offline detailed characterisation using comprehensive two dimensional gas chromatography. Observations indicate that a substantial fraction (up to 15% by mass) of atmospheric sub-micron organic aerosol was observed as methylfuran (MF) after thermal desorption. This observation was associated with the simultaneous measurements of established gas-phase isoprene oxidation products methylvinylketone (MVK) and methacrolein (MACR). Observations of MF were also made during experimental chamber oxidation of isoprene. Positive matrix factorisation of the AMS organic mass spectral time series produced a robust factor which accounts for an average of 23% (0.18 μg m−3), reaching as much as 53% (0.50 μg m−3) of the total oraganic loading, identified by (and highly correlated with) a strong MF signal. Assuming that this factor is generally representative of isoprene SOA, isoprene derived aerosol plays a significant role in the region. Comparisons with measurements from other studies suggest this type of isoprene SOA plays a role in other isoprene dominated environments, albeit with varying significance.

scholarly journals Isoprene oxidation by nitrate radical: alkyl nitrate and secondary organic aerosol yields

2009 ◽  
Vol 9 (2) ◽  
pp. 8857-8902 ◽  
Author(s):  
A. W. Rollins ◽  
A. Kiendler-Scharr ◽  
J. Fry ◽  
T. Brauers ◽  
S. S. Brown ◽  
...  
Keyword(s):  
First Generation ◽  
Secondary Organic Aerosol ◽  
Model Simulation ◽  
Effective Rate Constant ◽  
Organic Aerosol ◽  
Effective Rate ◽  
Oxidation Products ◽  
Alkyl Nitrates ◽  
Alkyl Nitrate ◽  
Isoprene Oxidation

Abstract. Alkyl nitrates and secondary organic aerosol (SOA) produced during the oxidation of isoprene by nitrate radicals has been observed in the SAPHIR chamber. We find the yield of nitrates is 70±8% from the isoprene+NO3 reaction, and the yield for secondary dinitrates produced in the reaction of primary isoprene nitrates with NO3 is 40±20%. We find an effective rate constant for reaction of NO3 with the group of first generation oxidation products to be 7×10−14 cm3 s−1. At the low total organic aerosol concentration in the chamber (max ≈0.6 μg m−3) we observed a mass yield (ΔSOA mass/Δisoprene mass) of 2% for the entire 16 h experiment. However a comparison of the timing of the observed SOA production to a box model simulation of first and second generation oxidation products shows that the yield from the first generation products was <0.2% while the further oxidation of the initial products leads to a yield of 10% (defined as ΔSOA/Δisoprene2x where Δisoprene2x is the mass of isoprene which reacted twice with NO3). The SOA yield of 10% is consistent with equilibrium partitioning of highly functionalized C5 products of isoprene oxidation.

scholarly journals Characterization of a real-time tracer for isoprene epoxydiols-derived secondary organic aerosol (IEPOX-SOA) from aerosol mass spectrometer measurements

2015 ◽  
Vol 15 (20) ◽  
pp. 11807-11833 ◽  
Author(s):  
W. W. Hu ◽  
P. Campuzano-Jost ◽  
B. B. Palm ◽  
D. A. Day ◽  
A. M. Ortega ◽  
...  
Keyword(s):  
Mass Spectrometer ◽  
Secondary Organic Aerosol ◽  
Transport Model ◽  
Organic Aerosol ◽  
Oxidation Products ◽  
Chemical Transport Model ◽  
Aerosol Mass Spectrometer ◽  
Aerosol Mass ◽  
Multiple Field

Abstract. Substantial amounts of secondary organic aerosol (SOA) can be formed from isoprene epoxydiols (IEPOX), which are oxidation products of isoprene mainly under low-NO conditions. Total IEPOX-SOA, which may include SOA formed from other parallel isoprene oxidation pathways, was quantified by applying positive matrix factorization (PMF) to aerosol mass spectrometer (AMS) measurements. The IEPOX-SOA fractions of organic aerosol (OA) in multiple field studies across several continents are summarized here and show consistent patterns with the concentration of gas-phase IEPOX simulated by the GEOS-Chem chemical transport model. During the Southern Oxidant and Aerosol Study (SOAS), 78 % of PMF-resolved IEPOX-SOA is accounted by the measured IEPOX-SOA molecular tracers (2-methyltetrols, C5-Triols, and IEPOX-derived organosulfate and its dimers), making it the highest level of molecular identification of an ambient SOA component to our knowledge. An enhanced signal at C5H6O+ (m/z 82) is found in PMF-resolved IEPOX-SOA spectra. To investigate the suitability of this ion as a tracer for IEPOX-SOA, we examine fC5H6O (fC5H6O= C5H6O+/OA) across multiple field, chamber, and source data sets. A background of ~ 1.7 ± 0.1 ‰ (‰ = parts per thousand) is observed in studies strongly influenced by urban, biomass-burning, and other anthropogenic primary organic aerosol (POA). Higher background values of 3.1 ± 0.6 ‰ are found in studies strongly influenced by monoterpene emissions. The average laboratory monoterpene SOA value (5.5 ± 2.0 ‰) is 4 times lower than the average for IEPOX-SOA (22 ± 7 ‰), which leaves some room to separate both contributions to OA. Locations strongly influenced by isoprene emissions under low-NO levels had higher fC5H6O (~ 6.5 ± 2.2 ‰ on average) than other sites, consistent with the expected IEPOX-SOA formation in those studies. fC5H6O in IEPOX-SOA is always elevated (12–40 ‰) but varies substantially between locations, which is shown to reflect large variations in its detailed molecular composition. The low fC5H6O (< 3 ‰) reported in non-IEPOX-derived isoprene-SOA from chamber studies indicates that this tracer ion is specifically enhanced from IEPOX-SOA, and is not a tracer for all SOA from isoprene. We introduce a graphical diagnostic to study the presence and aging of IEPOX-SOA as a triangle plot of fCO2 vs. fC5H6O. Finally, we develop a simplified method to estimate ambient IEPOX-SOA mass concentrations, which is shown to perform well compared to the full PMF method. The uncertainty of the tracer method is up to a factor of ~ 2, if the fC5H6O of the local IEPOX-SOA is not available. When only unit mass-resolution data are available, as with the aerosol chemical speciation monitor (ACSM), all methods may perform less well because of increased interferences from other ions at m/z 82. This study clarifies the strengths and limitations of the different AMS methods for detection of IEPOX-SOA and will enable improved characterization of this OA component.

Secondary organic aerosol yields from cloud-processing of isoprene oxidation products

2008 ◽  
Vol 35 (2) ◽  
Author(s):  
Barbara Ervens ◽  
Annmarie G. Carlton ◽  
Barbara J. Turpin ◽  
Katye E. Altieri ◽  
Sonia M. Kreidenweis ◽  
...  
Keyword(s):  
Secondary Organic Aerosol ◽  
Organic Aerosol ◽  
Oxidation Products ◽  
Cloud Processing ◽  
Isoprene Oxidation ◽  
Isoprene Oxidation Products

scholarly journals Investigating the use of secondary organic aerosol as seed particles in simulation chamber experiments

2011 ◽  
Vol 11 (12) ◽  
pp. 5917-5929 ◽  
Author(s):  
J. F. Hamilton ◽  
M. Rami Alfarra ◽  
K. P. Wyche ◽  
M. W. Ward ◽  
A. C. Lewis ◽  
...  
Keyword(s):  
Mass Spectrometry ◽  
Secondary Organic Aerosol ◽  
Organic Aerosol ◽  
Oxidation Products ◽  
Ion Cyclotron Resonance ◽  
Photo Oxidation ◽  
Seed Particles ◽  
Aerosol Mass ◽  
Seed Aerosol ◽  
Limonene Oxidation

Abstract. The use of β-caryophyllene secondary organic aerosol particles as seeds for smog chamber simulations has been investigated. A series of experiments were carried out in the Manchester photochemical chamber as part of the Aerosol Coupling in the Earth System (ACES) project to study the effect of seed particles on the formation of secondary organic aerosol (SOA) from limonene photo-oxidation. Rather than use a conventional seed aerosol containing ammonium sulfate or diesel particles, a method was developed to use in-situ chamber generated seed particles from β-caryophyllene photo-oxidation, which were then diluted to a desired mass loading (in this case 4–13 μg m−3). Limonene was then introduced into the chamber and oxidised, with the formation of SOA seen as a growth in the size of oxidised organic seed particles from 150 to 325 nm mean diameter. The effect of the partitioning of limonene oxidation products onto the seed aerosol was assessed using aerosol mass spectrometry during the experiment and the percentage of m/z 44, an indicator of degree of oxidation, increased from around 5 to 8 %. The hygroscopicity of the aerosol also changed, with the growth factor for 200 nm particles increasing from less than 1.05 to 1.25 at 90 % RH. The detailed chemical composition of the limonene SOA could be extracted from the complex β-caryophyllene matrix using two-dimensional gas chromatography (GC × GC) and liquid chromatography coupled to mass spectrometry. High resolution Fourier Transform Ion Cyclotron Resonance Mass Spectrometry (FTICR-MS) was used to determine exact molecular formulae of the seed and the limonene modified aerosol. The average O:C ratio was seen to increase from 0.32 to 0.37 after limonene oxidation products had condensed onto the organic seed.

scholarly journals Secondary organic aerosol production from pinanediol, a semi-volatile surrogate for first-generation oxidation products of monoterpenes

2018 ◽  
Vol 18 (9) ◽  
pp. 6171-6186 ◽  
Author(s):  
Penglin Ye ◽  
Yunliang Zhao ◽  
Wayne K. Chuang ◽  
Allen L. Robinson ◽  
Neil M. Donahue
Keyword(s):  
Organic Compounds ◽  
First Generation ◽  
Secondary Organic Aerosol ◽  
Organic Aerosol ◽  
Particle Formation ◽  
Oxidation Products ◽  
Basis Set ◽  
New Particle Formation ◽  
Aerosol Mass ◽  
Volatile Precursor

Abstract. We have investigated the production of secondary organic aerosol (SOA) from pinanediol (PD), a precursor chosen as a semi-volatile surrogate for first-generation oxidation products of monoterpenes. Observations at the CLOUD facility at CERN have shown that oxidation of organic compounds such as PD can be an important contributor to new-particle formation. Here we focus on SOA mass yields and chemical composition from PD photo-oxidation in the CMU smog chamber. To determine the SOA mass yields from this semi-volatile precursor, we had to address partitioning of both the PD and its oxidation products to the chamber walls. After correcting for these losses, we found OA loading dependent SOA mass yields from PD oxidation that ranged between 0.1 and 0.9 for SOA concentrations between 0.02 and 20 µg m−3, these mass yields are 2–3 times larger than typical of much more volatile monoterpenes. The average carbon oxidation state measured with an aerosol mass spectrometer was around −0.7. We modeled the chamber data using a dynamical two-dimensional volatility basis set and found that a significant fraction of the SOA comprises low-volatility organic compounds that could drive new-particle formation and growth, which is consistent with the CLOUD observations.

scholarly journals Phase partitioning and volatility of secondary organic aerosol components formed from α-pinene ozonolysis and OH oxidation: the importance of accretion products and other low volatility compounds

2015 ◽  
Vol 15 (14) ◽  
pp. 7765-7776 ◽  
Author(s):  
F. D. Lopez-Hilfiker ◽  
C. Mohr ◽  
M. Ehn ◽  
F. Rubach ◽  
E. Kleist ◽  
...  
Keyword(s):  
Organic Compounds ◽  
Mass Spectrometer ◽  
Secondary Organic Aerosol ◽  
Organic Aerosol ◽  
Oxidation Products ◽  
Negative Ion ◽  
Ionization Mass ◽  
Particle Phase ◽  
Vapor Pressures ◽  
Aerosol Mass

Abstract. We measured a large suite of gas- and particle-phase multi-functional organic compounds with a Filter Inlet for Gases and AEROsols (FIGAERO) coupled to a high-resolution time-of-flight chemical ionization mass spectrometer (HR-ToF-CIMS) developed at the University of Washington. The instrument was deployed on environmental simulation chambers to study monoterpene oxidation as a secondary organic aerosol (SOA) source. We focus here on results from experiments utilizing an ionization method most selective towards acids (acetate negative ion proton transfer), but our conclusions are based on more general physical and chemical properties of the SOA. Hundreds of compounds were observed in both gas and particle phases, the latter being detected by temperature-programmed thermal desorption of collected particles. Particulate organic compounds detected by the FIGAERO–HR-ToF-CIMS are highly correlated with, and explain at least 25–50 % of, the organic aerosol mass measured by an Aerodyne aerosol mass spectrometer (AMS). Reproducible multi-modal structures in the thermograms for individual compounds of a given elemental composition reveal a significant SOA mass contribution from high molecular weight organics and/or oligomers (i.e., multi-phase accretion reaction products). Approximately 50 % of the HR-ToF-CIMS particle-phase mass is associated with compounds having effective vapor pressures 4 or more orders of magnitude lower than commonly measured monoterpene oxidation products. The relative importance of these accretion-type and other extremely low volatility products appears to vary with photochemical conditions. We present a desorption-temperature-based framework for apportionment of thermogram signals into volatility bins. The volatility-based apportionment greatly improves agreement between measured and modeled gas-particle partitioning for select major and minor components of the SOA, consistent with thermal decomposition during desorption causing the conversion of lower volatility components into the detected higher volatility compounds.

scholarly journals Investigating the use of secondary organic aerosol as seed particles in simulation chamber experiments

2010 ◽  
Vol 10 (10) ◽  
pp. 25117-25151
Author(s):  
J. F. Hamilton ◽  
M. Rami Alfarra ◽  
K. P. Wyche ◽  
M. W. Ward ◽  
A. C. Lewis ◽  
...  
Keyword(s):  
Mass Spectrometry ◽  
Secondary Organic Aerosol ◽  
Organic Aerosol ◽  
Oxidation Products ◽  
Ion Cyclotron Resonance ◽  
Photo Oxidation ◽  
Seed Particles ◽  
Aerosol Mass ◽  
Seed Aerosol ◽  
Limonene Oxidation

Abstract. The use of β-caryophyllene secondary organic aerosol particles as seeds for smog chamber simulations has been investigated. A series of experiments were carried out in the Manchester photochemical chamber as part of the Aerosol Coupling in the Earth System (ACES) project to study the effect of seed particles on the formation of secondary organic aerosol (SOA) from limonene photo-oxidation. Rather than use a conventional seed aerosol containing ammonium sulphate or diesel particles, a method was developed to use in situ chamber generated seed particles from β-caryophyllene photo-oxidation, which were then diluted to a desired mass loading (in this case 4–13 μg m-3). Limonene was then introduced into the chamber and oxidised, with the formation of SOA seen as a growth in the size of oxidised organic seed particles from 150 to 325 nm mean diameter. The effect of the partitioning of limonene oxidation products onto the seed aerosol was assessed using aerosol mass spectrometry during the experiment and the percentage of m/z 44, an indicator of degree of oxidation, increased from around 5 to 8%. The hygroscopicity of the aerosol also changed, with the growth factor for 200 nm particles increasing from less than 1.05 to 1.25 at 90% RH. The detailed chemical composition of the limonene SOA could be extracted from the complex β-caryophyllene matrix using two-dimensional gas chromatography (GC×GC) and liquid chromatography coupled to mass spectrometry. High resolution Fourier Transform Ion Cyclotron Resonance Mass Spectrometry (FTICR-MS) was used to determine exact molecular formulae of the seed and the limonene modified aerosol. The average O:C ratio was seen to increase from 0.32 to 0.37 after limonene oxidation products had condensed onto the organic seed.

scholarly journals Chemical evolution of secondary organic aerosol from OH-initiated heterogeneous oxidation

2010 ◽  
Vol 10 (2) ◽  
pp. 3265-3300 ◽  
Author(s):  
I. J. George ◽  
J. P. D. Abbatt
Keyword(s):  
Mass Spectra ◽  
Secondary Organic Aerosol ◽  
Organic Aerosol ◽  
Oxidation Products ◽  
Oh Radicals ◽  
Heterogeneous Oxidation ◽  
Atmospheric Aging ◽  
Aerosol Mass ◽  
Degree Of Oxidation ◽  
Aerosol Aging

Abstract. The heterogeneous oxidation of laboratory Secondary Organic Aerosol (SOA) particles by OH radicals was investigated. SOA particles, produced by reaction of α-pinene and O3, were exposed to OH radicals in a flow tube, and particle chemical composition, size, and hygroscopicity were measured to assess modifications due to oxidative aging. Aerosol Mass Spectrometer (AMS) mass spectra indicated that the degree of oxidation of SOA particles was significantly enhanced due to OH-initiated oxidation. Particle O/C ratios calculated from m/z 44 fraction from organic mass spectra rose by a maximum of ~0.04 units under equivalent atmospheric aging timescales of 2 weeks assuming a 24-h average OH concentration of 106 cm−3. Particle densities also increased with heterogeneous oxidation, consistent with the observed increase in the degree of oxidation. Minor reductions in particle size, with volume losses of up to 10%, were observed due to volatilization of oxidation products. The SOA particles became slightly more CCN active with an increase in the κ hygroscopicity parameter of up to a factor of two for the equivalent of 2 weeks of OH atmospheric exposure. These results indicate that OH heterogeneous oxidation of typical SOA proceeds sufficiently rapidly to be an atmospherically important organic aerosol aging mechanism.

scholarly journals Phase partitioning and volatility of secondary organic aerosol components formed from α-pinene ozonolysis and OH oxidation: the importance of accretion products and other low volatility compounds

2015 ◽  
Vol 15 (4) ◽  
pp. 4463-4494 ◽  
Author(s):  
F. D. Lopez-Hilfiker ◽  
C. Mohr ◽  
M. Ehn ◽  
F. Rubach ◽  
E. Kleist ◽  
...  
Keyword(s):  
Organic Compounds ◽  
Mass Spectrometer ◽  
Secondary Organic Aerosol ◽  
Organic Aerosol ◽  
Oxidation Products ◽  
Negative Ion ◽  
Ionization Mass ◽  
Particle Phase ◽  
Vapor Pressures ◽  
Aerosol Mass

Abstract. We measured a large suite of gas and particle phase multi-functional organic compounds with a Filter Inlet for Gases and AEROsols (FIGAERO) coupled to a high-resolution time-of-flight chemical ionization mass spectrometer (HR-ToF-CIMS) developed at the University of Washington. The instrument was deployed on environmental simulation chambers to study monoterpene oxidation as a secondary organic aerosol (SOA) source. We focus here on results from experiments utilizing an ionization method most selective towards acids (acetate negative ion proton transfer), but our conclusions are based on more general physical and chemical properties of the SOA. Hundreds of compounds were observed in both gas and particle phases, the latter being detected upon temperature programmed thermal desorption of collected particles. Particulate organic compounds detected by the FIGAERO HR-ToF-CIMS are highly correlated with, and explain at least 25–50% of, the organic aerosol mass measured by an Aerodyne Aerosol Mass Spectrometer (AMS). Reproducible multi-modal structures in the thermograms for individual compounds of a given elemental composition reveal a significant SOA mass contribution from large molecular weight organics and/or oligomers (i.e. multi-phase accretion reaction products). Approximately 50% of the HR-ToF-CIMS particle phase mass is associated with compounds having effective vapor pressures 4 or more orders of magnitude lower than commonly measured monoterpene oxidation products. The relative importance of these accretion-type and other extremely low volatility products appears to vary with photochemical conditions. We present a desorption temperature based framework for apportionment of thermogram signals into volatility bins. The volatility-based apportionment greatly improves agreement between measured and modeled gas–particle partitioning for select major and minor components of the SOA, consistent with thermal decomposition during desorption causing the conversion of lower volatility components into the detected higher volatility compounds.

Sign in / Sign up

Export Citation Format

Share Document