scholarly journals On the corrosion and soiling effects on materials by air pollution in Athens, Greece

2011 ◽  
Vol 11 (23) ◽  
pp. 12039-12048 ◽  
Author(s):  
C. Tzanis ◽  
C. Varotsos ◽  
J. Christodoulakis ◽  
J. Tidblad ◽  
M. Ferm ◽  
...  

Abstract. In the frame of the European project, entitled MULTI-ASSESS, specimens of structural metals, glass, stone and concrete materials were exposed to air pollution at a station, which was installed for this purpose on a building, located in the centre of Athens. The main purpose of this project was to determine the corrosion and soiling effects of air pollution on materials. A set of the specimens was exposed in a position that was sheltered from rain and partly from wind, and another set was exposed in unsheltered positions on the roof of the above said building. In addition, other specimens were exposed at different heights on the same building, in order to investigate for the first time the corrosion and soiling effects on various materials as a function of height. For the determination of these effects, chemical analysis of the specimens was performed and basic parameters as the weight change, the layer thickness and the optical properties were calculated. Finally, the results obtained are discussed and their plausible interpretation is attempted.

2010 ◽  
Vol 10 (12) ◽  
pp. 29599-29629
Author(s):  
C. Tzanis ◽  
C. Varotsos ◽  
J. Christodoulakis ◽  
J. Tidblad ◽  
M. Ferm ◽  
...  

Abstract. In the frame of the European project, entitled MULTI-ASSESS, specimens of structural metals, glass, stone and concrete materials were exposed to air pollution at a station, which was installed for this purpose on a building, located in the centre of Athens. The main purpose of this project was to determine the corrosion and soiling effects of air pollution on materials. A set of the specimens was exposed in a position that was sheltered from rain and partly from wind, and another set was exposed in unsheltered positions on the roof of the above said building. In addition, other specimens were exposed at different heights on the same building, in order to investigate for the first time the corrosion and soiling effects on various materials as a function of height. For the determination of these effects, chemical analysis of the specimens was performed and basic parameters as the weight change, the layer thickness and the optical properties were calculated. Finally, the results obtained are discussed and their plausible interpretation is attempted.


2015 ◽  
Vol 41 (2) ◽  
pp. 41-46 ◽  
Author(s):  
Ewa Miaśkiewicz-Pęska ◽  
Mirosław Szyłak-Szydłowski

Abstract Microbiological and chemical analysis of air was carried out on the area of landfill of wastes other than inert or hazardous. The landfill covers 20 ha and 40 000 Mg of wastes is deposited annually. Municipal waste is not segregated at the landfill. The research was conducted in April, May and November 2012. Number of the psychrophilic and mesophilic bacteria and fungi was estimated by a culture-based method. Quantitative determination of sulfur compounds and meteorological and olfactrometric examinations were also carried out. Chemical analysis was conducted with a Photovac Voyager portable gas chromatograph. Air samples were collected at 5 points. The largest group of microbes were psychrophilic bacteria, especially in summer. The highest concentration of hydrogen sulfide and other odorants was found at leachate tank and landfill body. According to the Polish Standard for the assessment of atmospheric air pollution the air in the area of the landfill is classified as not contaminated and sporadically moderately contaminated. In spring and summer the number of microscopic fungi was increased also in control samples.


2018 ◽  
Vol 4 (1) ◽  
pp. 673-676
Author(s):  
Philipp Wegerich ◽  
Gehring Hartmut

AbstractThe interest of this paper is the determination of the optical properties of oxygenated (saturation above 97 %) hemoglobin in clinical relevant concentrations (ranging from 5 to 15 g/dl), dependent on the layer thickness. Furthermore the generation of a high rate data set for training with machine learning approaches was intended. With a double integrating sphere setup (laser diodes from 780 to 1310 nm) - as a well referenced method - and flow through optical cuvettes ranging from 1 to 3 mm layer thickness, the transmission (𝑀𝑇) and reflection (𝑀𝑅) values of the samples were acquired. From those the layer thickness independent absorption (𝜇𝑎) and reduced scattering coefficients (𝜇𝑠’) were calculated by the means of the Inverse Adding Doubling (IAD) algorithm. For each sample the same coefficients should result correspondingly for all cuvette thicknesses in test. This relationship serves as an internal standard in the evaluation of the collected data sets. In parallel a spectrophotometer in the range from 690 to 1000 nm recorded transmission spectra for all samples as a second reference. First, the IAD algorithm provided optical coefficients (𝜇𝑎, 𝜇𝑠’) in all measurements, with few exceptions at low hemoglobin concentrations. The resulting coefficients match independently of the layer thickness. As a main second result, a high rate data set was generated which serves for further analysis - for example with machine learning approaches.


Author(s):  
F. A. Bannister

It has recently been shown by W. Nieuwenkamp that matlockite is identical in chemical composition and crystal-structure with artificial lead fluochloride PbFC1. His conclusion is based upon powder photographs of the two substances and a fluorine determination of a specimen of matlockite from Matlock, Derbyshire. The present work was undertaken primarily to check Nieuwenkamp's interesting results. Access to an exceptionally fine suite of matlockite specimens in the British Museum collection made possible single crystal X-ray measurements, accurate optical determinations, and a new chemical analysis.


During the progress of the X-ray research on this substance by Miss Yardley, the results of which are embodied in the preceding communication, the need for a thorough reinvestigation of the crystallographic and especially the optical properties of the substance, was made very clear. The difficulty as regards the optical constants was that of preparing the properly orientated and absolutely truly plane-surfaced section-plates and 60°-prisms of this relatively soft and fragile substance, and after many attempts of a really heroic nature Miss Yardley appealed to the author, who was only too pleased to bring into service his cutting-and-grinding goniometer, with which the necessary plates and prisms were successfully prepared. The author, however, becoming very interested in the substance, has carried out also a complete goniometrical remeasurement, in the light of the new and correct setting which Miss Yardley has indicated, and a determination of the density of the crystals, so that with the optical data, now given for the first time, a revised and much more complete crystallographic description is herewith given. It agrees in every respect with the conclusions of Miss Yardley, as described in the immediately preceding communication. The only real difficulty met with, which renders the substance unusual to deal with, is the fact that no cementing material has been found which is without action on iodo-succinimide. For instance, Canada balsam and its solution in benzene (a hydrocarbon which, very fortunately, does not act on iodo-succinimide) or turpentine at once turn deep brown to black when used to cement section-plates to cover-glasses or to the little circular plates of parallel glass which the author uses in the preparation of the second surface. So that, after the first surface of a section-plate has been ground, the crystal being held as usual on the crystal holder by opticians’ hard wax, any action not mattering much here, the usual process—of cementing the crystal by this first surface on to one of the little glass discs, fitting the latter into the receptacle for it in the parallel-plate, preparing fitting of the cutting-and-grinding goniometer, and grinding the second surface without further trouble and thus making a plate as thin as may be desired—cannot be employed with iodo-succinimide. To prepare the second surface the crystal must be reset goniometrically, while held in a grip-holder instead of the usual holder carrying opticians’ wax, and then ground and polished with great care to avoid slipping in the gripper. As the substance is soft and friable this is rather a nuisance, especially, moreover, as it was desirable to be able to obtain section-plates of considerable tenuity for the purposes of Laue photographic X-ray analysis, as well as very thick ones for the study of possible optical activity. Happily, however, all these unusual difficulties were eventually overcome, and the desired results obtained.


2021 ◽  
Author(s):  
Yaser Acikbas ◽  
Matem Erdogan ◽  
Rifat Capan ◽  
Cansu Ozkaya ◽  
Yasemin Baygu ◽  
...  

Abstract Zinc(II) phthalocyanine (Zn(II)Pc) molecule was the first time prepared onto three different substrates utilizing Langmuir-Blodgett (LB) deposition technique to investigate its vapor sensing abilities and some optical properties. We utilized five different and well-known techniques to control monolayer quality of Zn(II)Pc LB film. The obtained the thickness and refractive index values for Zn(II)Pc LB film with coated at different layers vary from 3.2 to 10.9 nm and from 1.42 to 1.71, respectively. The sensing properties were investigated by exposing the Zn(II)Pc-based mass or optical sensor to some organic vapors. Kinetic results presented that this Zn(II)Pc material is a good candidate as a sensor element with a fast and reversible response for dichloromethane sensing devices.


2020 ◽  
pp. 22-38
Author(s):  
Natalia Guseva ◽  
Vitaliy Berdutin

At present, the problem of establishing disability is a point at issue in Russia. Despite the fact that medical criteria for disability are being developed very actively, high-quality methods for assessing social hallmarks are still lacking. Since disability is a phenomenon inherent in any society, each state forms a social and economic policy for people with disabilities in accordance with its level of development, priorities and opportunities. We have proposed a three-stage model, which includes a system for the consistent solution of the main tasks aimed at studying the causes and consequences of the problems encountered today in the social protection of citizens with health problems. The article shows why the existing approaches to the determination of disability and rehabilitation programs do not correspond to the current state of Russian society and why a decrease in the rate of persons recognized as disabled for the first time does not indicate an improvement in the health of the population. The authors proposed a number of measures with a view to correcting the situation according to the results of the study.


Sign in / Sign up

Export Citation Format

Share Document