scholarly journals Seasonal variation in vertical volatile compounds air concentrations within a remote hemiboreal mixed forest

2012 ◽  
Vol 12 (9) ◽  
pp. 3909-3926 ◽  
Author(s):  
S. M. Noe ◽  
K. Hüve ◽  
Ü. Niinemets ◽  
L. Copolovici
Keyword(s):  
Forest Canopy ◽  
Mixed Forest ◽  
Oxidation Reactions ◽  
Aerosol Formation ◽  
Forest Canopies ◽  
Air Chemistry ◽  
Anthropogenic Contributions ◽  
One Year ◽  
Winter Time ◽  
The Vertical Distribution

Abstract. The vertical distribution of ambient biogenic volatile organic compounds (BVOC) concentrations within a hemiboreal forest canopy was investigated over a period of one year. Variability in temporal and spatial isoprene concentrations, ranging from 0.1 to 7.5 μg m−3, can be mainly explained by biogenic emissions from deciduous trees. Monoterpene concentrations exceeded isoprene largely and ranged from 0.01 to 140 μg m−3 and during winter time anthropogenic contributions are likely. Variation in monoterpene concentrations were found to be largest right above the ground and the vertical profiles suggest a weak mixing leading to terpene accumulation in the lower canopy. Exceptionally high values were recorded during a heat wave in July 2010 with very high midday temperatures above 30 °C for several weeks. During summer months, monoterpene exceeded isoprene concentrations 6-fold and during winter 12-fold. During summer months, dominance of α-pinene in the lower and of limonene in the upper part of the canopy was observed, both accounting for up to 70% of the total monoterpene concentration. During wintertime, Δ3-carene was the dominant species, accounting for 60% of total monoterpene concentration in January. Possible biogenic monoterpene sources beside the foliage are the leaf litter, the soil and also resins exuding from stems. In comparison, the hemiboreal mixed forest canopy showed similar isoprene but higher monoterpene concentrations than the boreal forest and lower isoprene but substantially higher monoterpene concentrations than the temperate mixed forest canopies. These results have major implications for simulating air chemistry and secondary organic aerosol formation within and above hemiboreal forest canopies. Possible effects of in-cartridge oxidation reactions are discussed as our measurement technique did not include oxidant scavenging. A comparison between measurements with and without scavenging oxidants is presented.

scholarly journals Seasonal variation in vertical volatile compounds air concentrations within a remote hemiboreal mixed forest

2011 ◽  
Vol 11 (5) ◽  
pp. 14607-14635
Author(s):  
S. M. Noe ◽  
K. Hüve ◽  
Ü. Niinemets ◽  
L. Copolovici
Keyword(s):  
Forest Canopy ◽  
Mixed Forest ◽  
Aerosol Formation ◽  
Forest Canopies ◽  
Relative Contribution ◽  
Air Chemistry ◽  
Ambient Concentrations ◽  
Anthropogenic Contributions ◽  
One Year ◽  
Winter Time

Abstract. The vertical distribution of ambient biogenic volatile organic compounds (BVOC) concentrations within a hemiboreal forest canopy was investigated over a period of one year. Variability in temporal and spatial isoprene concentrations can be mainly explained by biogenic emissions from deciduous trees, ranging from 0.1 to 7.5 μg m−3. Monoterpene concentrations exceeded isoprene largely and ranged from 0.01 to 140 μg m−3 and during winter time anthropogenic contributions are likely. Variation in monoterpene concentrations found to be largest right above the ground and the vertical profile suggest a weak mixing leading to terpene accumulation in the lower canopy. Exceptionally high values were recorded during a heat wave in July 2010 with very high midday temperatures above 30 °C for several weeks. During summer months, monoterpene exceeded isoprene concentrations 6-fold and during winter 12-fold. The relative contribution of diverse monoterpene species to the ambient concentrations revealed a dominance of α-pinene in the lower and of limonene in the upper part of the canopy, both accounting for up to 70 % of the total monoterpene concentration during summer months. The main contributing monoterpene during wintertime was Δ3-carene accounting for 60 % of total monoterpene concentration in January. Possible biogenic monoterpene sources beside the foliage are the leaf litter, the soil and also resins exuding from stems. In comparison, the hemiboreal mixed forest canopy showed similar isoprene but higher monoterpene concentrations than the boreal forest and lower isoprene but substantially higher monoterpene concentrations than the temperate mixed forest canopies. These results have major implications for simulating air chemistry and secondary organic aerosol formation within and above hemiboreal forest canopies.

scholarly journals Forest Canopy Can Efficiently Filter Trace Metals in Deposited Precipitation in a Subalpine Spruce Plantation

Forests ◽  
2019 ◽  
Vol 10 (4) ◽  
pp. 318 ◽  
Author(s):  
Siyi Tan ◽  
Hairong Zhao ◽  
Wanqin Yang ◽  
Bo Tan ◽  
Kai Yue ◽  
...  
Keyword(s):  
Trace Metals ◽  
Human Disturbance ◽  
Forest Canopy ◽  
Subalpine Forest ◽  
Forest Canopies ◽  
Closed Canopy ◽  
Filtering Efficiency ◽  
One Year ◽  
The One ◽  
Filtering Effect

Trace metals can enter natural regions with low human disturbance through atmospheric circulation; however, little information is available regarding the filtering efficiency of trace metals by forest canopies. In this study, a representative subalpine spruce plantation was selected to investigate the net throughfall fluxes of eight trace metals (Fe, Mn, Cu, Zn, Al, Pb, Cd and Cr) under a closed canopy and gap-edge canopy from August 2015 to July 2016. Over the one-year observation, the annual fluxes of Al, Zn, Fe, Mn, Cu, Cd, Cr and Pb in the deposited precipitation were 7.29 kg·ha−1, 2.30 kg·ha−1, 7.02 kg·ha−1, 0.16 kg·ha−1, 0.19 kg·ha−1, 0.06 kg·ha−1, 0.56 kg·ha−1 and 0.24 kg·ha−1, respectively. The annual net throughfall fluxes of these trace metals were −1.73 kg·ha−1, −0.90 kg·ha−1, −1.68 kg·ha−1, 0.03 kg·ha−1, −0.03 kg·ha−1, −0.02 kg·ha−1, −0.09 kg·ha−1 and −0.08 kg·ha−1, respectively, under the gap-edge canopy and 1.59 kg·ha−1, −1.13 kg·ha−1, −1.65 kg·ha−1, 0.10 kg·ha−1, −0.04 kg·ha−1, −0.03 kg·ha−1, −0.26 kg·ha−1 and −0.15 kg·ha−1, respectively, under the closed canopy. The closed canopy displayed a greater filtering effect of the trace metals from precipitation than the gap-edge canopy in this subalpine forest. In the rainy season, the net filtering ratio of trace metals ranged from −66.01% to 89.05% for the closed canopy and from −52.32% to 33.09% for the gap-edge canopy. In contrast, the net filtering ratio of all trace metals exceeded 50.00% for the closed canopy in the snowy season. The results suggest that most of the trace metals moving through the forest canopy are filtered by canopy in the subalpine forest.

scholarly journals INVESTIGATION OF FOREST CANOPY DENSITY CHANGES IN HYRCANIAN FOREST RESOURCES DURING 1987 TO 2002 USING REMOTE SENSING TECHNOLOGY

2019 ◽  
Vol XLII-4/W18 ◽  
pp. 1031-1034
Author(s):  
M. Taefi Feijani ◽  
S. Azadnejad ◽  
S. Homayouni ◽  
M. Moradi
Keyword(s):  
Time Series ◽  
Forest Canopy ◽  
Spectral Band ◽  
Mixed Forest ◽  
Canopy Density ◽  
Rate Of Growth ◽  
Sensing Technology ◽  
Forest Canopy Density ◽  
Annual Time Series ◽  
Forest Lands

Abstract. Forest canopy density (FCD) of seventeen protected areas of the Caspian Hyrcanian mixed forest are studied here. A modified version of FCD mapper based on spectral band fusion and customized threshold calibration that is optimized for Hyrcanian forests is used for this purpose. In this project, the results of applying the FCD model on three time series of satellite images have been analysed. This classification is based on the FAO standard and consist of four categories such as no-forest, thin, semi-dense and dense. These images, taken with TM and ETM sensors, belong to three-time series between 1987 and 2002. The results of this study indicate that the rate of growth or destruction of forests has been investigated in the regions. Then, using tables and diagrams of variations, the rate of growth or destruction of forest lands in the corresponding period in each class is determined. The FCD model has the ability to study the canopy loading classes in the annual time series.

scholarly journals Linking Meteorology, Turbulence, and Air Chemistry in the Amazon Rain Forest

2016 ◽  
Vol 97 (12) ◽  
pp. 2329-2342 ◽  
Author(s):  
Jose D. Fuentes ◽  
Marcelo Chamecki ◽  
Rosa Maria Nascimento dos Santos ◽  
Celso Von Randow ◽  
Paul C. Stoy ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Surface Layer ◽  
Vertical Distribution ◽  
Rain Forest ◽  
Forest Canopy ◽  
Cloud Condensation Nuclei ◽  
Chemical Species ◽  
Chemical Transformations ◽  
Condensation Nuclei ◽  
The Vertical Distribution

Abstract We describe the salient features of a field study whose goals are to quantify the vertical distribution of plant-emitted hydrocarbons and their contribution to aerosol and cloud condensation nuclei production above a central Amazonian rain forest. Using observing systems deployed on a 50-m meteorological tower, complemented with tethered balloon deployments, the vertical distribution of hydrocarbons and aerosols was determined under different boundary layer thermodynamic states. The rain forest emits sufficient reactive hydrocarbons, such as isoprene and monoterpenes, to provide precursors of secondary organic aerosols and cloud condensation nuclei. Mesoscale convective systems transport ozone from the middle troposphere, enriching the atmospheric boundary layer as well as the forest canopy and surface layer. Through multiple chemical transformations, the ozone-enriched atmospheric surface layer can oxidize rain forest–emitted hydrocarbons. One conclusion derived from the field studies is that the rain forest produces the necessary chemical species and in sufficient amounts to undergo oxidation and generate aerosols that subsequently activate into cloud condensation nuclei.

scholarly journals Simulating ozone dry deposition at a boreal forest with a multi-layer canopy deposition model

2017 ◽  
Vol 17 (2) ◽  
pp. 1361-1379 ◽  
Author(s):  
Putian Zhou ◽  
Laurens Ganzeveld ◽  
Üllar Rannik ◽  
Luxi Zhou ◽  
Rosa Gierens ◽  
...  
Keyword(s):  
Boreal Forest ◽  
Dry Deposition ◽  
Forest Canopy ◽  
Small Contribution ◽  
Chemical Production ◽  
Deposition Model ◽  
Ambient Relative Humidity ◽  
Soil Uptake ◽  
Dry Deposition Model ◽  
The Vertical Distribution

Abstract. A multi-layer ozone (O3) dry deposition model has been implemented into SOSAA (a model to Simulate the concentrations of Organic vapours, Sulphuric Acid and Aerosols) to improve the representation of O3 concentration and flux within and above the forest canopy in the planetary boundary layer. We aim to predict the O3 uptake by a boreal forest canopy under varying environmental conditions and analyse the influence of different factors on total O3 uptake by the canopy as well as the vertical distribution of deposition sinks inside the canopy. The newly implemented dry deposition model was validated by an extensive comparison of simulated and observed O3 turbulent fluxes and concentration profiles within and above the boreal forest canopy at SMEAR II (Station to Measure Ecosystem–Atmosphere Relations II) in Hyytiälä, Finland, in August 2010. In this model, the fraction of wet surface on vegetation leaves was parametrised according to the ambient relative humidity (RH). Model results showed that when RH was larger than 70 % the O3 uptake onto wet skin contributed ∼ 51 % to the total deposition during nighttime and ∼ 19 % during daytime. The overall contribution of soil uptake was estimated about 36 %. The contribution of sub-canopy deposition below 4.2 m was modelled to be ∼ 38 % of the total O3 deposition during daytime, which was similar to the contribution reported in previous studies. The chemical contribution to O3 removal was evaluated directly in the model simulations. According to the simulated averaged diurnal cycle the net chemical production of O3 compensated up to ∼ 4 % of dry deposition loss from about 06:00 to 15:00 LT. During nighttime, the net chemical loss of O3 further enhanced removal by dry deposition by a maximum ∼ 9 %. Thus the results indicated an overall relatively small contribution of airborne chemical processes to O3 removal at this site.

Multi-angular observation of forest canopy reflectance based on a hyperspectral UAV imaging platform

2020 ◽  
Author(s):  
Feng Qiu ◽  
Qian Zhang
Keyword(s):  
Forest Canopy ◽  
Vegetation Indices ◽  
Canopy Structure ◽  
Distribution Patterns ◽  
Background Information ◽  
Canopy Reflectance ◽  
Bidirectional Reflectance ◽  
Forest Canopies ◽  
Ground Distance ◽  
Observation Method

<p>Forest canopy reflectance varies with solar and observation geometries and shows distinct anisotropic characteristics. The bidirectional reflectance distribution function (BRDF) of forest canopies is influenced by canopy structure, leaf biochemistry and background reflectance. Multi-angular remote sensing observations of forest canopies provide much more information about canopy structure and background information compared with the nadir observations. The development of unmanned aerial vehicle (UAV) provides great opportunities for multi-angular observations in forests. We developed a solid method to obtained bidirectional reflectance of forest canopies based on a hyperspectral UAV imaging platform in this study. With this multi-angular observation method, we obtained canopy reflectance images with the view zenith angle (VZA) varying from 60° (forward) to 60° (backward) at fixed interval (10°), as well as the hotspot and darkspot images in the principle plane in conifer forests. Since the single pixel with very high spatial resolution (around 10 cm) in the UAV images are not representative for the study of the whole forest canopy, several pixels in the central of each images were selected and averaged to determine the canopy reflectance. Variations of the averaged reflectance with ground distance represented by the selected pixels were analyzed and the optimum ground distance for study the multi-angular forest canopy reflectance was determined. The observed canopy reflectance peaks at the hotspot and clear images of the hotspot are observed. The sensitivities of canopy reflectance to VZAs vary with spectral bands. The reflectance at red bands near 680 nm are most sensitive to VZA. Some common used vegetation indices, such as NDVI, EVI, MTCI, PRI, also vary greatly with VZAs and demonstrate different spatial distribution patterns. The observations fit well with the 4-Scale geometric-optical model simulations. The multi-angular observation methods based on UAV platform have the advantages of efficient and effective in multi-angular observation with higher flexibility in VZA adjustment and lower cost, compared with the airborne or spaceborne sensors. This multi-angular observation method is very useful for study the BRDF and canopy structural and biochemical characteristics of forests and has great potential in forestry and ecological studies.</p>

scholarly journals Comparison of Seven Inversion Models for Estimating Plant and Woody Area Indices of Leaf-on and Leaf-off Forest Canopy Using Explicit 3D Forest Scenes

2018 ◽  
Vol 10 (8) ◽  
pp. 1297 ◽  
Author(s):  
Jie Zou ◽  
Yinguo Zhuang ◽  
Francesco Chianucci ◽  
Chunna Mai ◽  
Weimu Lin ◽  
...  
Keyword(s):  
Forest Canopy ◽  
Estimation Algorithm ◽  
Area Ratio ◽  
Forest Canopies ◽  
Tree Species Composition ◽  
Area Index ◽  
Inversion Model ◽  
Segment Size ◽  
Clumping Index ◽  
Index Estimation

Optical methods require model inversion to infer plant area index (PAI) and woody area index (WAI) of leaf-on and leaf-off forest canopy from gap fraction or radiation attenuation measurements. Several inversion models have been developed previously, however, a thorough comparison of those inversion models in obtaining the PAI and WAI of leaf-on and leaf-off forest canopy has not been conducted so far. In the present study, an explicit 3D forest scene series with different PAI, WAI, phenological periods, stand density, tree species composition, plant functional types, canopy element clumping index, and woody component clumping index was generated using 50 detailed 3D tree models. The explicit 3D forest scene series was then used to assess the performance of seven commonly used inversion models to estimate the PAI and WAI of the leaf-on and leaf-off forest canopy. The PAI and WAI estimated from the seven inversion models and simulated digital hemispherical photography images were compared with the true PAI and WAI of leaf-on and leaf-off forest scenes. Factors that contributed to the differences between the estimates of the seven inversion models were analyzed. Results show that both the factors of inversion model, canopy element and woody component projection functions, canopy element and woody component estimation algorithms, and segment size are contributed to the differences between the PAI and WAI estimated from the seven inversion models. There is no universally valid combination of inversion model, needle-to-shoot area ratio, canopy element and woody component clumping index estimation algorithm, and segment size that can accurately measure the PAI and WAI of all leaf-on and leaf-off forest canopies. The performance of the combinations of inversion model, needle-to-shoot area ratio, canopy element and woody component clumping index estimation algorithm, and segment size to estimate the PAI and WAI of leaf-on and leaf-off forest canopies is the function of the inversion model as well as the canopy element and woody component clumping index estimation algorithm, segment size, PAI, WAI, tree species composition, and plant functional types. The impact of canopy element and woody component projection function measurements on the PAI and WAI estimation of the leaf-on and leaf-off forest canopy can be reduced to a low level (<4%) by adopting appropriate inversion models.

Sign in / Sign up

Export Citation Format

Share Document