scholarly journals Evaluating model parameterizations of submicron aerosol scattering and absorption with in situ data from ARCTAS 2008

2016 ◽  
Vol 16 (14) ◽  
pp. 9435-9455 ◽  
Author(s):  
Matthew J. Alvarado ◽  
Chantelle R. Lonsdale ◽  
Helen L. Macintyre ◽  
Huisheng Bian ◽  
Mian Chin ◽  
...  
Keyword(s):  
Optical Properties ◽  
Size Distribution ◽  
Aerosol Size Distribution ◽  
Visible Radiation ◽  
Submicron Aerosol ◽  
In Situ Data ◽  
Aerosol Absorption ◽  
Aerosol Scattering ◽  
The Impact

Abstract. Accurate modeling of the scattering and absorption of ultraviolet and visible radiation by aerosols is essential for accurate simulations of atmospheric chemistry and climate. Closure studies using in situ measurements of aerosol scattering and absorption can be used to evaluate and improve models of aerosol optical properties without interference from model errors in aerosol emissions, transport, chemistry, or deposition rates. Here we evaluate the ability of four externally mixed, fixed size distribution parameterizations used in global models to simulate submicron aerosol scattering and absorption at three wavelengths using in situ data gathered during the 2008 Arctic Research of the Composition of the Troposphere from Aircraft and Satellites (ARCTAS) campaign. The four models are the NASA Global Modeling Initiative (GMI) Combo model, GEOS-Chem v9-02, the baseline configuration of a version of GEOS-Chem with online radiative transfer calculations (called GC-RT), and the Optical Properties of Aerosol and Clouds (OPAC v3.1) package. We also use the ARCTAS data to perform the first evaluation of the ability of the Aerosol Simulation Program (ASP v2.1) to simulate submicron aerosol scattering and absorption when in situ data on the aerosol size distribution are used, and examine the impact of different mixing rules for black carbon (BC) on the results. We find that the GMI model tends to overestimate submicron scattering and absorption at shorter wavelengths by 10–23 %, and that GMI has smaller absolute mean biases for submicron absorption than OPAC v3.1, GEOS-Chem v9-02, or GC-RT. However, the changes to the density and refractive index of BC in GC-RT improve the simulation of submicron aerosol absorption at all wavelengths relative to GEOS-Chem v9-02. Adding a variable size distribution, as in ASP v2.1, improves model performance for scattering but not for absorption, likely due to the assumption in ASP v2.1 that BC is present at a constant mass fraction throughout the aerosol size distribution. Using a core-shell mixing rule in ASP overestimates aerosol absorption, especially for the fresh biomass burning aerosol measured in ARCTAS-B, suggesting the need for modeling the time-varying mixing states of aerosols in future versions of ASP.

scholarly journals Evaluating Model Parameterizations of Submicron Aerosol Scattering and Absorption with In Situ Data from ARCTAS 2008

2016 ◽  
Author(s):  
M. J. Alvarado ◽  
C. R. Lonsdale ◽  
H. L. Macintyre ◽  
H. Bian ◽  
M. Chin ◽  
...  
Keyword(s):  
Optical Properties ◽  
Size Distribution ◽  
Aerosol Size Distribution ◽  
Visible Radiation ◽  
Submicron Aerosol ◽  
In Situ Data ◽  
Aerosol Absorption ◽  
Aerosol Scattering ◽  
The Impact

Abstract. Accurate modeling of the scattering and absorption of ultraviolet and visible radiation by aerosols is essential for accurate simulations of atmospheric chemistry and climate. Closure studies using in situ measurements of aerosol scattering and absorption can be used to evaluate and improve models of aerosol optical properties without interference from model errors in aerosol emissions, transport, chemistry, or deposition rates. Here we evaluate the ability of four externally mixed, fixed size distribution parameterizations used in global models to simulate submicron aerosol scattering and absorption at three wavelengths using in situ data gathered during the 2008 Arctic Research of the Composition of the Troposphere from Aircraft and Satellites (ARCTAS) campaign. The four models are the NASA Global Modeling Initiative (GMI) Combo model, GEOS-Chem v9-02, the baseline configuration of a version of GEOS-Chem with online radiative transfer calculations (called GC-RT), and the Optical Properties of Aerosol and Clouds (OPAC v3.1) package. We also use the ARCTAS data to perform the first evaluation of the ability of the Aerosol Simulation Program (ASP v2.1) to simulate submicron aerosol scattering and absorption when in situ data on the aerosol size distribution is used, and examine the impact of different mixing rules for black carbon (BC) on the results. We find that the GMI model tends to overestimate submicron scattering and absorption at shorter wavelengths by 10–23 %, and that GMI has smaller absolute mean biases for submicron absorption than OPAC v3.1, GEOS-Chem v9-02, or GC-RT. However, the changes to the density and refractive index of BC in GC-RT improve the simulation of submicron aerosol absorption at all wavelengths relative to GEOS-Chem v9-02. Adding in situ size distribution information, as in ASP v2.1, improves model performance for scattering but not for absorption, likely due to the assumption in ASP v2.1 that BC is present at a constant mass fraction through out the aerosol size distribution. Using a core-shell mixing state in ASP overestimates aerosol absorption, especially for the fresh biomass burning aerosol measured in ARCTAS-B, suggesting the need for time-varying mixing states in future versions of ASP.

scholarly journals Impact of aerosol size distribution on extinction and spectral dependence of radiances measured by the OMPS Limb profiler instrument

2018 ◽  
Author(s):  
Zhong Chen ◽  
Pawan K. Bhartia ◽  
Robert Loughman ◽  
Peter Colarco
Keyword(s):  
Size Distribution ◽  
Spectral Dependence ◽  
Aerosol Size Distribution ◽  
Retrieval Algorithm ◽  
In Situ Data ◽  
Aerosol Scattering ◽  
Scattering Phase ◽  
Scattering Phase Function ◽  
Scattering Index ◽  
The Impact

Abstract. The Ozone Mapping and Profiler Suite Limb Profiler (OMPS/LP) has been flying on the Suomi NPP satellite since Oct 2011. It is designed to produce ozone and aerosol vertical profiles at ~ 2 km vertical resolution over the entire sunlit globe. The current operational (V1) aerosol extinction retrieval algorithm assumes a bimodal lognormal aerosol size distribution (ASD) whose parameters were derived from in situ data taken from an aircraft. In this paper we discuss the impact on the retrieval of using an ASD derived by the Community Aerosol and Radiation Model for Atmospheres (CARMA). We find that the impact of ASD on the retrieved extinctions varies strongly with the underlying reflectivity of the scene, and the functional form of this variation is very different at different scattering angles. We also evaluate how well the two ASDs perform in explaining the spectral dependence of Aerosol Scattering Index (ASI); a dimensionless quantity that we derive from the measured radiances by subtracting out the Rayleigh contribution. ASI is easier to interpret than radiances themselves and serves as our measurement vector. The results show that even though the two ASDs produce very different aerosol scattering phase function values at small and large scattering angles, the effect of the ASD on the spectral dependence of ASI is significant only at small angles. This implies that while OMPS/LP measurements have some information to evaluate the ASDs, they are most effective only at small scattering angles, which for LP measurement geometry occur only in the northern hemisphere. Our analysis suggests that overall CARMA ASD does a better job in explaining the spectral dependence of measured ASI than the ASD used in the operational V1 algorithm.

scholarly journals Optical Properties of the Urban Aerosol Particles Obtained from Ground Based Measurements and Satellite-Based Modelling Studies

2015 ◽  
Vol 2015 ◽  
pp. 1-12 ◽  
Author(s):  
Genrik Mordas ◽  
Nina Prokopciuk ◽  
Steigvilė Byčenkienė ◽  
Jelena Andriejauskienė ◽  
Vidmantas Ulevicius
Keyword(s):  
Optical Properties ◽  
Light Scattering ◽  
Urban Environment ◽  
Size Distribution ◽  
Number Concentration ◽  
Scattering Coefficient ◽  
Dust Particles ◽  
Aerosol Size Distribution ◽  
Air Masses ◽  
The Impact

Applications of satellite remote sensing data combined with ground measurements and model simulation were applied to study aerosol optical properties as well as aerosol long-range transport under the impact of large scale circulation in the urban environment in Lithuania (Vilnius). Measurements included the light scattering coefficients at 3 wavelengths (450, 550, and 700 nm) measured with an integrating nephelometer and aerosol particle size distribution (0.5–12 μm) and number concentration (Dpa> 0.5 μm) registered by aerodynamic particle sizer. Particle number concentration and mean light scattering coefficient varied from relatively low values of 6.0 cm−3and 12.8 Mm−1associated with air masses passed over Atlantic Ocean to relatively high value of 119 cm−3and 276 Mm−1associated with South-Western air masses. Analysis shows such increase in the aerosol light scattering coefficient (276 Mm−1) during the 3rd of July 2012 was attributed to a major Sahara dust storm. Aerosol size distribution with pronounced coarse particles dominance was attributed to the presence of dust particles, while resuspended dust within the urban environment was not observed.

scholarly journals Combining airborne in situ and ground-based lidar measurements for attribution of aerosol layers

2018 ◽  
Author(s):  
Anna Nikandrova ◽  
Ksenia Tabakova ◽  
Antti Manninen ◽  
Riikka Väänänen ◽  
Tuukka Petäjä ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Size Distribution ◽  
Aerosol Size Distribution ◽  
Long Range Transport ◽  
Back Trajectories ◽  
Clear Sky ◽  
Temporal And Spatial Variability ◽  
Range Transport ◽  
Temporal And Spatial

Abstract. Understanding the distribution of aerosol layers is important for determining long range transport and aerosol radiative forcing. In this study we combine airborne in situ measurements of aerosol with data obtained by a ground-based High Spectral Resolution Lidar (HSRL) and radiosonde profiles to investigate the temporal and vertical variability of aerosol properties in the lower troposphere. The HSRL was deployed in Hyytiälä, Southern Finland, from January to September 2014 as a part of the US DoE ARM (Atmospheric Radiation Measurement) mobile facility during the BAECC (Biogenic Aerosols – Effects on Cloud and Climate) Campaign. Two flight campaigns took place in April and August 2014 with instruments measuring the aerosol size distribution from 10 nm to 10 µm at altitudes up to 3800 m. Two case studies from the flight campaigns, when several aerosol layers were identified, were selected for further investigation: one clear sky case, and one partly cloudy case. During the clear sky case, turbulent mixing ensured low temporal and spatial variability in the measured aerosol size distribution in the boundary layer whereas mixing was not as homogeneous in the boundary layer during the partly cloudy case. The elevated layers exhibited greater temporal and spatial variability in aerosol size distribution, indicating a lack of mixing. New particle formation was observed in the boundary layer during the clear sky case, and nucleation mode particles were also seen in the elevated layers that were not mixing with the boundary layer. Interpreting local measurements of elevated layers in terms of long-range transport can be achieved using back trajectories from Lagrangian models, but care should be taken in selecting appropriate arrival heights, since the modelled and observed layer heights did not always coincide. We conclude that higher confidence in attributing elevated aerosol layers with their air mass origin is attained when back trajectories are combined with lidar and radiosonde profiles.

scholarly journals Analysis of simultaneous aerosol and ocean glint retrieval using multi-angle observations

2020 ◽  
Author(s):  
Kirk Knobelspiesse ◽  
Amir Ibrahim ◽  
Bryan Franz ◽  
Sean Bailey ◽  
Robert Levy ◽  
...  
Keyword(s):  
Optical Properties ◽  
Wind Speed ◽  
Radiative Transfer ◽  
Size Distribution ◽  
Atmospheric Correction ◽  
Surface Wind ◽  
Ocean Surface ◽  
True Value ◽  
Aerosol State ◽  
The Impact

Abstract. Since early 2000, NASA's Multi-angle Imaging SpectroRadiometer (MISR) instrument has been performing remote sensing retrievals of aerosol optical properties from the polar orbiting Terra spacecraft. A noteworthy aspect of MISR observations over the ocean is that, for much of the Earth, some of the multi-angle views have contributions from solar reflection by the ocean surface (glint, or glitter), while others do not. Aerosol retrieval algorithms often discard these glint influenced observations because they can overwhelm the signal and are difficult to predict without knowledge of the (wind speed driven) ocean surface roughness. However, theoretical studies have shown that multi-angle observations of a location at geometries with and without reflected sun glint can be a rich source of information, sufficient to support simultaneous retrieval of both the aerosol state and the wind speed at the ocean surface. We are in the early stages of creating such an algorithm. In this manuscript, we describe our assessment of the appropriate level of parameterization for simultaneous aerosol and ocean surface property retrievals using sun glint. For this purpose, we use Generalized Nonlinear Retrieval Analysis (GENRA), an information content assessment (ICA) technique employing Bayesian inference, and simulations from the Ahmad-Fraser iterative radiative transfer code. We find that four parameters are suitable: aerosol optical depth (τ), particle size distribution (expressed as the fine mode fraction f of small particles in a bimodal size distribution), surface wind speed (w), and relative humidity (r, to define the aerosol water content and complex refractive index). None of these parameters define ocean optical properties, as we found that the aerosol state could be retrieved with the nine MISR near-infrared views alone, where the ocean body is black in the open ocean. We also found that retrieval capability varies with observation geometry, and that as τ increases so does the ability to determine aerosol intensive optical properties (r and f, while it decreases for w). Increases in wind speed decrease the ability to determine the true value of that parameter, but have minimal impact on retrieval of aerosol properties. We explored the benefit of excluding the two most extreme MISR view angles for which radiative transfer with the plane parallel approximation is less certain, but found no advantage in doing so. Finally, the impact of treating wind speed as a scalar parameter, rather than as a two parameter directional wind, was tested. While the simpler scalar model does contribute to overall aerosol uncertainty, it is not sufficiently large to justify the addition of another dimension to parameter space. An algorithm designed upon these principles is in development. It will be used to perform an atmospheric correction with MISR for coincident ocean color (OC) observations by the Moderate Resolution Imaging Spectroradiometer (MODIS) instrument, also on the NASA Terra spacecraft. Unlike MISR, MODIS is a single view angle instrument, but it has a more complete set of spectral channels ideal for determination of ocean optical properties. The atmospheric correction of MODIS OC data can therefore benefit from MISR aerosol retrievals. Furthermore, higher spatial resolution data from coincident MISR observations may also improve glint screening.

scholarly journals Vertical profiles of sub-micron aerosol single scattering albedo over Indian region immediately before monsoon onset and during its development: Research from the SWAAMI field campaign

2019 ◽  
Author(s):  
Mohanan R. Manoj ◽  
Sreedharan K. Satheesh ◽  
Krishnaswamy K. Moorthy ◽  
Hugh Coe
Keyword(s):  
Active Phase ◽  
Single Scattering ◽  
Single Scattering Albedo ◽  
Development Research ◽  
Aerosol Absorption ◽  
South West ◽  
Aerosol Scattering ◽  
First Time ◽  
Geographical Locations

Abstract. Vertical structures of aerosol single scattering albedo (SSA), from near the surface through the free troposphere, have been estimated for the first time at distinct geographical locations over the Indian mainland and adjoining oceans, using in-situ measurements of aerosol scattering and absorption coefficients aboard the FAAM BAe-146 aircraft during the South West Asian Aerosol Monsoon Interactions (SWAAMI) campaign from June to July 2016. These are used to examine the spatial variation of SSA profiles and also to characterize its transformation from just prior to the onset of Indian Summer Monsoon (June 2016) to its active phase (July 2016). Very strong aerosol absorption, with SSA values as low as 0.7, persisted in the lower altitudes (

scholarly journals Evaluation of Second-Hand Exposure to Electronic Cigarette Vaping under a Real Scenario: Measurements of Ultrafine Particle Number Concentration and Size Distribution and Comparison with Traditional Tobacco Smoke

Toxics ◽  
2019 ◽  
Vol 7 (4) ◽  
pp. 59 ◽  
Author(s):  
Jolanda Palmisani ◽  
Alessia Di Gilio ◽  
Laura Palmieri ◽  
Carmelo Abenavoli ◽  
Marco Famele ◽  
...  
Keyword(s):  
Size Distribution ◽  
Tobacco Smoke ◽  
Ultrafine Particles ◽  
Natural Ventilation ◽  
Ultrafine Particle ◽  
Inhalation Exposure ◽  
Number Concentration ◽  
Aerosol Size Distribution ◽  
High Temporal Resolution ◽  
The Impact

The present study aims to evaluate the impact of e-cig second-hand aerosol on indoor air quality in terms of ultrafine particles (UFPs) and potential inhalation exposure levels of passive bystanders. E-cig second-hand aerosol characteristics in terms of UFPs number concentration and size distribution exhaled by two volunteers vaping 15 different e-liquids inside a 49 m3 room and comparison with tobacco smoke are discussed. High temporal resolution measurements were performed under natural ventilation conditions to simulate a realistic exposure scenario. Results showed a systematic increase in UFPs number concentration (part cm−3) related to a 20-min vaping session (from 6.56 × 103 to 4.01 × 104 part cm−3), although this was one up to two order of magnitude lower than that produced by one tobacco cigarette consumption (from 1.12 × 105 to 1.46 × 105 part cm−3). E-cig second-hand aerosol size distribution exhibits a bimodal behavior with modes at 10.8 and 29.4 nm in contrast with the unimodal typical size distribution of tobacco smoke with peak mode at 100 nm. In the size range 6–26 nm, particles concentration in e-cig second-hand aerosol were from 2- (Dp = 25.5 nm) to 3800-fold (Dp = 9.31 nm) higher than in tobacco smoke highlighting that particles exhaled by users and potentially inhaled by bystanders are nano-sized with high penetration capacity into human airways.

Sign in / Sign up

Export Citation Format

Share Document