scholarly journals Measurement-based modeling of daytime and nighttime oxidation of atmospheric mercury

Author(s):  
Maor Gabay ◽  
Mordechai Peleg ◽  
Erick Fredj ◽  
Eran Tas

Abstract. Accurate characterization of gaseous elemental mercury (GEM) chemical oxidation pathways and their kinetics is critically important for assessing the transfer of atmospheric mercury to bioaquatic systems. Recent comprehensive field measurements have suggested that the nitrate radical (NO3) plays a role in efficient nighttime oxidation of GEM, and that the role of the hydroxyl radical (OH) as a GEM oxidant has been underestimated. We used the CAABA/MECCA chemical box model and additional kinetic calculations to analyze these measurement results, in order to investigate the nighttime and daytime oxidation of GEM. We assumed a second-order reaction for the NO3 induced nighttime oxidation of GEM. Our analysis demonstrated that nighttime oxidation of GEM has to be included in the model to account for the measured variations in nighttime reactive gaseous mercury (RGM) concentration. A lower limit and best-fit rate constant for GEM nighttime oxidation are provided. To the best of our knowledge, this is the first time that a rate for nighttime oxidation of GEM has been determined based on field measurements. Our analysis further indicates that OH has a much more important role in GEM oxidation than commonly considered. A lower-limit rate constant for the OH–RGM reaction is provided.

2010 ◽  
Vol 10 (10) ◽  
pp. 4661-4672 ◽  
Author(s):  
A. S. Cole ◽  
A. Steffen

Abstract. Gaseous elemental mercury (GEM) measurements at Alert, Canada, from 1995 to 2007 were analyzed for statistical time trends and for correlations with meteorological and climate data. A significant decreasing trend in annual GEM concentration is reported at Alert, with an estimated slope of −0.0086 ng m−3 yr−1 (−0.6% yr−1) over this 13-year period. It is shown that there has been a shift in the month of minimum mean GEM concentration from May to April due to a change in the timing of springtime atmospheric mercury depletion events (AMDEs). These AMDEs are found to decrease with increasing local temperature within each month, both at Alert and at Amderma, Russia. These results support the temperature dependence suggested by previous experimental results and theoretical kinetic calculations on both bromine generation and mercury oxidation and highlight the potential for changes in Arctic mercury chemistry with climate. A correlation between total monthly AMDEs at Alert and the Polar/Eurasian Teleconnection Index was observed only in March, perhaps due to higher GEM inputs in early spring in those years with a weak polar vortex. A correlation of AMDEs at Alert with wind direction supports the origin of mercury depletion events over the Arctic Ocean, in agreement with a previous trajectory study of ozone depletion events. Interannual variability in total monthly depletion event frequency at Alert does not appear to correlate significantly with total or first-year northern hemispheric sea ice area or with other major teleconnection patterns. Nor do AMDEs at either Alert or Amderma correlate with local wind speed, as might be expected if depletion events are sustained by stable, low-turbulence atmospheric conditions. The data presented here – both the change in timing of depletion events and their relationship with temperature – can be used as additional constraints to improve the ability of models to predict the cycling and deposition of mercury in the Arctic.


2009 ◽  
Vol 9 (6) ◽  
pp. 27167-27194
Author(s):  
A. S. Cole ◽  
A. Steffen

Abstract. Gaseous elemental mercury (GEM) measurements at Alert, Canada, from 1995 to 2007 were analyzed for statistical time trends and for correlations with meteorological and climate data. A significant decreasing trend in annual GEM concentration is reported at Alert, with an estimated slope of −0.0086 ng m−3 yr−1 (−0.6% yr−1) over this 13-year period. It is shown that there has been a shift in the month of minimum mean GEM concentration from May to April due to a change in the timing of springtime atmospheric mercury depletion events (AMDEs). These AMDEs are found to decrease with increasing local temperature within each month, both at Alert and at Amderma, Russia. These results agree with the temperature dependence suggested by previous experimental results and theoretical kinetic calculations and highlight the potential for changes in Arctic mercury chemistry with climate. A correlation between total monthly AMDEs at Alert and the Polar/Eurasian Teleconnection Index was observed only in March, perhaps due to higher GEM inputs in early spring in those years with a weak polar vortex. A correlation of AMDEs at Alert with wind direction supports the origin of mercury depletion events over the Arctic Ocean, in agreement with a previous trajectory study of ozone depletion events. Interannual variability in total monthly depletion event frequency at Alert does not appear to correlate significantly with total or first-year northern hemispheric sea ice area or with other major teleconnection patterns. Nor do AMDEs at either Alert or Amderma correlate with local wind speed, as might be expected if depletion events are sustained by stable, low-turbulence atmospheric conditions. The data presented here – both the change in timing of depletion events and their relationship with temperature – can be used as additional constraints to improve the ability of global models to predict the cycling and deposition of mercury in the Arctic.


2008 ◽  
Vol 8 (23) ◽  
pp. 7165-7180 ◽  
Author(s):  
Z.-Q. Xie ◽  
R. Sander ◽  
U. Pöschl ◽  
F. Slemr

Abstract. Atmospheric mercury depletion events (AMDEs) during polar springtime are closely correlated with bromine-catalyzed tropospheric ozone depletion events (ODEs). To study gas- and aqueous-phase reaction kinetics and speciation of mercury during AMDEs, we have included mercury chemistry into the box model MECCA (Module Efficiently Calculating the Chemistry of the Atmosphere), which enables dynamic simulation of bromine activation and ODEs. We found that the reaction of Hg with Br atoms dominates the loss of gaseous elemental mercury (GEM). To explain the experimentally observed synchronous depletion of GEM and O3, the reaction rate of Hg+BrO has to be much lower than that of Hg+Br. The synchronicity is best reproduced with rate coefficients at the lower limit of the literature values for both reactions, i.e. kHg+Br≈3×10−13 and kHg+BrO≤1×10−15 cm3 molecule−1 s−1, respectively. Throughout the simulated AMDEs, BrHgOBr was the most abundant reactive mercury species, both in the gas phase and in the aqueous phase. The aqueous-phase concentrations of BrHgOBr, HgBr2, and HgCl2 were several orders of magnitude larger than that of Hg(SO3)22−. Considering chlorine chemistry outside depletion events (i.e. without bromine activation), the concentration of total divalent mercury in sea-salt aerosol particles (mostly HgCl42−) was much higher than in dilute aqueous droplets (mostly Hg(SO3)22−), and did not exhibit a diurnal cycle (no correlation with HO2 radicals).


2016 ◽  
Author(s):  
Qianqian Hong ◽  
Zhouqing Xie ◽  
Cheng Liu ◽  
Feiyue Wang ◽  
Pinhua Xie ◽  
...  

Abstract. Long-term continuous measurements of speciated atmospheric mercury were conducted at Hefei, a mid-latitude inland city in east central China, from July 2013 to June 2014. The mean concentrations (± standard deviation) of gaseous elemental mercury (GEM), reactive gaseous mercury (RGM) and particle-bound mercury (PBM) were 3.95 ± 1.93 ng m−3, 2.49 ± 2.41 pg m−3 and 23.3 ± 90.8 pg m−3, respectively, during non-haze days, and 4.74 ± 1.62 ng m−3, 4.32 ± 8.36 pg m−3 and 60.2 ± 131.4 pg m−3, respectively, during haze days. Potential source contribution function (PSCF) analysis suggested that the atmospheric mercury pollution during haze days was caused primarily by local mercury emissions, instead of via long-range mercury transport. In addition, the disadvantageous diffussion during haze days will also enhance the level of atmospheric mercury. Compared to the GEM and RGM, change in PBM was more sensitive to the haze pollution. The mean PBM concentration during haze days was 2.5 times that during non-haze days due to elevated concentrations of particulate matter. A remarkable seasonal trend in PBM was observed with concentration decreasing in the following order in response to the frequency of haze days: autumn, winter, spring, summer. A distinct diurnal relationship was found between GEM and RGM during haze days, with the peak values of RGM coinciding with the decline in GEM. Using HgOH as an intermediate product during GEM oxidation, our results suggest that NO2 aggregation with HgOH could explain the enhanced production of RGM during the daytime in haze days. Increasing level of NOx will potentially accelerate the oxidation of GEM despite the decrease of solar radiation.


2010 ◽  
Vol 7 (6) ◽  
pp. 537 ◽  
Author(s):  
Anne L. Soerensen ◽  
Henrik Skov ◽  
Matthew S. Johnson ◽  
Marianne Glasius

Environmental context Mercury is a neurotoxin that bioaccumulates in the aquatic food web. Atmospheric emissions from urban areas close to the coast could cause increased local mercury deposition to the ocean. Our study adds important new data to the current limited knowledge on atmospheric mercury emissions and dynamics in coastal urban areas. Abstract Approximately 50% of primary atmospheric mercury emissions are anthropogenic, resulting from e.g. emission hotspots in urban areas. Emissions from urban areas close to the coast are of interest because they could increase deposition loads to nearby coastal waters as well as contribute to long range transport of mercury. We present results from measurements of gaseous elemental mercury (GEM) and reactive gaseous mercury (RGM) in 15 coastal cities and their surrounding marine boundary layer (MBL). An increase of 15–90% in GEM concentration in coastal urban areas was observed compared with the remote MBL. Strong RGM enhancements were only found in two cities. In urban areas with statistically significant GEM/CO enhancement ratios, slopes between 0.0020 and 0.0087 ng m–3 ppb–1 were observed, which is consistent with other observations of anthropogenic enhancement. The emission ratios were used to estimate GEM emissions from the areas. A closer examination of data from Sydney (Australia), the coast of Chile, and Valparaiso region (Chile) in the southern hemisphere, is presented.


2007 ◽  
Vol 7 (4) ◽  
pp. 10837-10931 ◽  
Author(s):  
A. Steffen ◽  
T. Douglas ◽  
M. Amyot ◽  
P. Ariya ◽  
K. Aspmo ◽  
...  

Abstract. It was discovered in 1995 that, during the spring time, unexpectedly low concentrations of gaseous elemental mercury (GEM) occurred in the Arctic air. This was surprising for a pollutant known to have a long residence time in the atmosphere; however conditions appeared to exist in the Arctic that promoted this depletion of mercury (Hg). This phenomenon is termed atmospheric mercury depletion events (AMDEs) and its discovery has revolutionized our understanding of the cycling of Hg in Polar Regions while stimulating a significant amount of research to understand its impact to this fragile ecosystem. Shortly after the discovery was made in Canada, AMDEs were confirmed to occur throughout the Arctic, sub-Artic and Antarctic coasts. It is now known that, through a series of photochemically initiated reactions involving halogens, GEM is converted to a more reactive species and is subsequently associated to particles in the air and/or deposited to the polar environment. AMDEs are a means by which Hg is transferred from the atmosphere to the environment that was previously unknown. In this article we review the history of Hg in Polar Regions, the methods used to collect Hg in different environmental media, research results of the current understanding of AMDEs from field, laboratory and modeling work, how Hg cycles around the environment after AMDEs, gaps in our current knowledge and the future impacts that AMDEs may have on polar environments. The research presented has shown that while considerable improvements in methodology to measure Hg have been made the main limitation remains knowing the speciation of Hg in the various media. The processes that drive AMDEs and how they occur are discussed. As well, the roles that the snow pack, oceans, fresh water and the sea ice play in the cycling of Hg are presented. It has been found that deposition of Hg from AMDEs occurs at marine coasts and not far inland and that a fraction of the deposited Hg does not remain in the same form in the snow. Kinetic studies undertaken have demonstrated that bromine is the major oxidant depleting Hg in the atmosphere. Modeling results demonstrate that there is a significant deposition of Hg to Polar Regions as a result of AMDEs. Models have also shown that Hg is readily transported to the Arctic from source regions, at times during springtime when this environment is actively transforming Hg from the atmosphere to the snow and ice surfaces. The presence of significant amounts of methyl Hg in snow in the Arctic surrounding AMDEs is important because this species is the link between the environment and impacts to wildlife and humans. Further, much work on methylation and demethylation processes have occurred but are not yet fully understood. Recent changes in the climate and sea ice cover in Polar Regions are likely to have strong effects on the cycling of Hg in this environment; however more research is needed to understand Hg processes in order to formulate meaningful predictions of these changes. Mercury, Atmospheric mercury depletion events (AMDE), Polar, Arctic, Antarctic, Ice


2016 ◽  
Author(s):  
Z. Ye ◽  
H. Mao ◽  
C.-J. Lin ◽  
S. Y. Kim

Abstract. A box model incorporating a state-of-the-art chemical mechanism for atmospheric mercury (Hg) cycling was developed to investigate oxidation of gaseous elemental mercury (GEM) at three locations in the northeastern United States: Appledore Island (marine), Thompson Farm (coastal, rural), and Pack Monadnock (inland, rural, elevated). The chemical mechanism improved model's ability to simulate the formation of gaseous oxidized mercury (GOM) at the study sites. At the coastal and inland sites, GEM oxidation was predominated by O3 and OH, contributing 80–99 % of total GOM production during daytime. H2O2 initiated GEM oxidation was significant (~ 33 % of the total GOM) at the inland site during nighttime. In the marine boundary layer (MBL), Br and BrO were dominant GEM oxidants contributing ~ 70 % of the total GOM production during mid-day, while O3 dominated GEM oxidation (50–90 % of GOM production) over the remaining day. Following the production of HgBr from GEM + Br, HgBr was oxidized by BrO, HO2, OH, ClO, and IO to form Hg(II) brominated GOM species. However, under atmospheric conditions, the prevalent GEM oxidants in the MBL could be Br / BrO or O3 / OH depending on Br and BrO mixing ratios. Relative humidity and products of the CH3O2 + BrO reaction possibly affected significantly the mixing ratios of Br or BrO radicals and subsequently GOM formation. Gas-particle partitioning could be potentially important in the production of GOM as well as Br and BrO at the marine site.


2019 ◽  
Vol 12 (2) ◽  
pp. 1207-1217 ◽  
Author(s):  
Matthieu B. Miller ◽  
Sarrah M. Dunham-Cheatham ◽  
Mae Sexauer Gustin ◽  
Grant C. Edwards

Abstract. Reactive mercury (RM), the sum of both gaseous oxidized Hg and particulate bound Hg, is an important component of the global atmospheric mercury cycle, but measurement currently depends on uncalibrated operationally defined methods with large uncertainty and demonstrated interferences and artifacts. Cation exchange membranes (CEMs) provide a promising alternative methodology for quantification of RM, but method validation and improvements are ongoing. For the CEM material to be reliable, uptake of gaseous elemental mercury (GEM) must be negligible under all conditions and RM compounds must be captured and retained with high efficiency. In this study, the performance of CEM material under exposure to high concentrations of GEM (1.43×106 to 1.85×106 pg m−3) and reactive gaseous mercury bromide (HgBr2 ∼5000 pg m−3) was explored using a custom-built mercury vapor permeation system. Quantification of total permeated Hg was measured via pyrolysis at 600 ∘C and detection using a Tekran® 2537A. Permeation tests were conducted over 24 to 72 h in clean laboratory air, with absolute humidity levels ranging from 0.1 to 10 g m−3 water vapor. GEM uptake by the CEM material averaged no more than 0.004 % of total exposure for all test conditions, which equates to a non-detectable GEM artifact for typical ambient air sample concentrations. Recovery of HgBr2 on CEM filters was on average 127 % compared to calculated total permeated HgBr2 based on the downstream Tekran® 2537A data. The low HgBr2 breakthrough on the downstream CEMs (< 1 %) suggests that the elevated recoveries are more likely related to suboptimal pyrolyzer conditions or inefficient collection on the Tekran® 2537A gold traps.


2008 ◽  
Vol 8 (6) ◽  
pp. 1445-1482 ◽  
Author(s):  
A. Steffen ◽  
T. Douglas ◽  
M. Amyot ◽  
P. Ariya ◽  
K. Aspmo ◽  
...  

Abstract. It was discovered in 1995 that, during the spring time, unexpectedly low concentrations of gaseous elemental mercury (GEM) occurred in the Arctic air. This was surprising for a pollutant known to have a long residence time in the atmosphere; however conditions appeared to exist in the Arctic that promoted this depletion of mercury (Hg). This phenomenon is termed atmospheric mercury depletion events (AMDEs) and its discovery has revolutionized our understanding of the cycling of Hg in Polar Regions while stimulating a significant amount of research to understand its impact to this fragile ecosystem. Shortly after the discovery was made in Canada, AMDEs were confirmed to occur throughout the Arctic, sub-Artic and Antarctic coasts. It is now known that, through a series of photochemically initiated reactions involving halogens, GEM is converted to a more reactive species and is subsequently associated to particles in the air and/or deposited to the polar environment. AMDEs are a means by which Hg is transferred from the atmosphere to the environment that was previously unknown. In this article we review Hg research taken place in Polar Regions pertaining to AMDEs, the methods used to collect Hg in different environmental media, research results of the current understanding of AMDEs from field, laboratory and modeling work, how Hg cycles around the environment after AMDEs, gaps in our current knowledge and the future impacts that AMDEs may have on polar environments. The research presented has shown that while considerable improvements in methodology to measure Hg have been made but the main limitation remains knowing the speciation of Hg in the various media. The processes that drive AMDEs and how they occur are discussed. As well, the role that the snow pack and the sea ice play in the cycling of Hg is presented. It has been found that deposition of Hg from AMDEs occurs at marine coasts and not far inland and that a fraction of the deposited Hg does not remain in the same form in the snow. Kinetic studies undertaken have demonstrated that bromine is the major oxidant depleting Hg in the atmosphere. Modeling results demonstrate that there is a significant deposition of Hg to Polar Regions as a result of AMDEs. Models have also shown that Hg is readily transported to the Arctic from source regions, at times during springtime when this environment is actively transforming Hg from the atmosphere to the snow and ice surfaces. The presence of significant amounts of methyl Hg in snow in the Arctic surrounding AMDEs is important because this species is the link between the environment and impacts to wildlife and humans. Further, much work on methylation and demethylation processes has occurred but these processes are not yet fully understood. Recent changes in the climate and sea ice cover in Polar Regions are likely to have strong effects on the cycling of Hg in this environment; however more research is needed to understand Hg processes in order to formulate meaningful predictions of these changes.


2016 ◽  
Vol 16 (5) ◽  
pp. 3061-3076 ◽  
Author(s):  
David S. McLagan ◽  
Maxwell E. E. Mazur ◽  
Carl P. J. Mitchell ◽  
Frank Wania

Abstract. Because gaseous elemental mercury (GEM) is distributed globally through the atmosphere, reliable means of measuring its concentrations in air are important. Passive air samplers (PASs), designed to be cheap, simple to operate, and to work without electricity, could provide an alternative to established active sampling techniques in applications such as (1) long-term monitoring of atmospheric GEM levels in remote regions and in developing countries, (2) atmospheric mercury source identification and characterization through finely resolved spatial mapping, and (3) the recording of personal exposure to GEM. An effective GEM PAS requires a tightly constrained sampling rate, a large and stable uptake capacity, and a sensitive analytical technique. None of the GEM PASs developed to date achieve levels of accuracy and precision sufficient for the reliable determination of background concentrations over extended deployments. This is due to (1) sampling rates that vary due to meteorological factors and manufacturing inconsistencies, and/or (2) an often low, irreproducible and/or unstable uptake capacity of the employed sorbents. While we identify shortcomings of existing GEM PAS, we also reveal potential routes to overcome those difficulties. Activated carbon and nanostructured metal surfaces hold promise as effective sorbents. Sampler designs incorporating diffusive barriers should be able to notably reduce the influence of wind on sampling rates.


Sign in / Sign up

Export Citation Format

Share Document