scholarly journals LES study on turbulent dust deposition and its dependence on atmospheric boundary-layer stability

2021 ◽  
Author(s):  
Xin Yin ◽  
Cong Jiang ◽  
Yaping Shao ◽  
Ning Huang ◽  
Jie Zhang
Keyword(s):  
Boundary Layer ◽  
Shear Stress ◽  
Atmospheric Boundary Layer ◽  
Dust Emission ◽  
Boundary Layer Stability ◽  
Surface Shear Stress ◽  
Dust Deposition ◽  
Surface Shear ◽  
Eddy Simulation ◽  
Large Eddy

Abstract. It is increasingly recognized that atmospheric boundary-layer stability (ABLS) plays an important role in aeolian processes. While the effects of ABLS on dust emission have been documented in several studies, those on dust deposition are less well studied. By means of large-eddy simulation, we investigate how ABLS influences the probability distribution of surface shear stress and hence dust deposition. Statistical analysis of the model results reveals that the shear stress can be well approximated by using a Weibull distribution and the ABLS influences on dust deposition can be estimated by considering the shear stress fluctuations. The model-simulated dust depositions are compared with the predictions of a dust-deposition scheme and measurements, and the findings are then used to improve the dust-deposition scheme. This research represents a further step towards developing dust schemes that account for the stochastic nature of dust processes.

scholarly journals Experimental study of wall boundary conditions for large-eddy simulation

2001 ◽  
Vol 446 ◽  
pp. 309-320 ◽  
Author(s):  
IVAN MARUSIC ◽  
GARY J. KUNKEL ◽  
FERNANDO PORTÉ-AGEL
Keyword(s):  
Boundary Layer ◽  
Boundary Condition ◽  
Shear Stress ◽  
Wall Shear Stress ◽  
Large Eddy Simulation ◽  
Boundary Conditions ◽  
Streamwise Velocity ◽  
New Model ◽  
Eddy Simulation ◽  
Large Eddy

An experimental investigation was conducted to study the wall boundary condition for large-eddy simulation (LES) of a turbulent boundary layer at Rθ = 3500. Most boundary condition formulations for LES require the specification of the instantaneous filtered wall shear stress field based upon the filtered velocity field at the closest grid point above the wall. Three conventional boundary conditions are tested using simultaneously obtained filtered wall shear stress and streamwise and wall-normal velocities, at locations nominally within the log region of the flow. This was done using arrays of hot-film sensors and X-wire probes. The results indicate that models based on streamwise velocity perform better than those using the wall-normal velocity, but overall significant discrepancies were found for all three models. A new model is proposed which gives better agreement with the shear stress measured at the wall. The new model is also based on the streamwise velocity but is formulated so as to be consistent with ‘outer-flow’ scaling similarity of the streamwise velocity spectra. It is therefore expected to be more generally applicable over a larger range of Reynolds numbers at any first-grid position within the log region of the boundary layer.

scholarly journals Large-eddy simulation of turbulent flows over an urban building array with the ABLE-LBM and comparison with 3D MRI observed data sets

2020 ◽  
Author(s):  
Yansen Wang ◽  
Michael J. Benson
Keyword(s):  
Boundary Layer ◽  
Kinetic Energy ◽  
Large Eddy Simulation ◽  
Atmospheric Boundary Layer ◽  
Validation Study ◽  
Tall Building ◽  
Turbulent Wind ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Building Array

Abstract In this article we describe the details of an ABLE-LBM (Atmospheric Boundary Layer Environment-Lattice Boltzmann Model) validation study for urban building array turbulent flow simulations. The ABLE-LBM large-eddy simulation results were compared with a set of 3D magnetic resonance image (MRI) velocimetry data. The ABLE-LBM simulations used the same building layout and Reynolds numbers operated in the laboratory water channel. The building set-up was an evenly spaced orthogonal array of cubic buildings (height = H) with a central tall building (height = 3H) in the second row. Two building orientations, angled with 0°and 45° wind directions, were simulated with ABLE-LBM. The model produced horizontal and vertical fields of time-averaged velocity fields and compared well with the experimental results. The model also produced urban canyon flows and vortices at front and lee sides and over building tops that were similar in strength and location to the laboratory studies. The turbulent kinetic energy associated with these two wind directions were also presented in this simulation study. It is shown that the building array arrangement, especially the tall building, has a great effect on turbulent wind fields. There is a Karman vortex street on the lee side of the tall building. High turbulent intensity areas are associated with the vortex shedding motions at building edges. In addition, the wind direction is a very important factor for turbulent wind and kinetic energy distribution. This validation study indicated that ABLE-LBM is a viable simulation model for turbulent atmospheric boundary layer flows in the urban building array. The computational speed of ABLE-LBM using the GPU has shown that real-time LES simulation is realizable for a computational domain with several millions grid points.

Large-Eddy Simulation of the Atmospheric Boundary Layer

2020 ◽  
Vol 177 (2-3) ◽  
pp. 541-581 ◽  
Author(s):  
Rob Stoll ◽  
Jeremy A. Gibbs ◽  
Scott T. Salesky ◽  
William Anderson ◽  
Marc Calaf
Keyword(s):  
Boundary Layer ◽  
Large Eddy Simulation ◽  
Atmospheric Boundary Layer ◽  
Eddy Simulation ◽  
Large Eddy
Sign in / Sign up

Export Citation Format

Share Document