scholarly journals Evaluating the sensitivity of radical chemistry and ozone formation to ambient VOCs and NO<sub><i>x</i></sub> in Beijing

2021 ◽  
Vol 21 (3) ◽  
pp. 2125-2147
Author(s):  
Lisa K. Whalley ◽  
Eloise J. Slater ◽  
Robert Woodward-Massey ◽  
Chunxiang Ye ◽  
James D. Lee ◽  
...  
Keyword(s):  
Propagation Rate ◽  
Chemical Mechanism ◽  
Ozone Production ◽  
Peroxy Radicals ◽  
Atom Concentration ◽  
Mixing Ratios ◽  
Budget Analysis ◽  
Order Of Magnitude ◽  
Atom Chemistry ◽  
Cl Atom

Abstract. Measurements of OH, HO2, complex RO2 (alkene- and aromatic-related RO2) and total RO2 radicals taken during the integrated Study of AIR Pollution PROcesses in Beijing (AIRPRO) campaign in central Beijing in the summer of 2017, alongside observations of OH reactivity, are presented. The concentrations of radicals were elevated, with OH reaching up to 2.8×107moleculecm-3, HO2 peaking at 1×109moleculecm-3 and the total RO2 concentration reaching 5.5×109moleculecm-3. OH reactivity (k(OH)) peaked at 89 s−1 during the night, with a minimum during the afternoon of ≈22s-1 on average. An experimental budget analysis, in which the rates of production and destruction of the radicals are compared, highlighted that although the sources and sinks of OH were balanced under high NO concentrations, the OH sinks exceeded the known sources (by 15 ppbv h−1) under the very low NO conditions (<0.5 ppbv) experienced in the afternoons, demonstrating a missing OH source consistent with previous studies under high volatile organic compound (VOC) emissions and low NO loadings. Under the highest NO mixing ratios (104 ppbv), the HO2 production rate exceeded the rate of destruction by ≈50ppbvh-1, whilst the rate of destruction of total RO2 exceeded the production by the same rate, indicating that the net propagation rate of RO2 to HO2 may be substantially slower than assumed. If just 10 % of the RO2 radicals propagate to HO2 upon reaction with NO, the HO2 and RO2 budgets could be closed at high NO, but at low NO this lower RO2 to HO2 propagation rate revealed a missing RO2 sink that was similar in magnitude to the missing OH source. A detailed box model that incorporated the latest Master Chemical Mechanism (MCM3.3.1) reproduced the observed OH concentrations well but over-predicted the observed HO2 under low concentrations of NO (<1 ppbv) and under-predicted RO2 (both the complex RO2 fraction and other RO2 types which we classify as simple RO2) most significantly at the highest NO concentrations. The model also under-predicted the observed k(OH) consistently by ≈10s-1 across all NOx levels, highlighting that the good agreement for OH was fortuitous due to a cancellation of missing OH source and sink terms in its budget. Including heterogeneous loss of HO2 to aerosol surfaces did reduce the modelled HO2 concentrations in line with the observations but only at NO mixing ratios <0.3 ppbv. The inclusion of Cl atoms, formed from the photolysis of nitryl chloride, enhanced the modelled RO2 concentration on several mornings when the Cl atom concentration was calculated to exceed 1×104atomscm-3 and could reconcile the modelled and measured RO2 concentrations at these times. However, on other mornings, when the Cl atom concentration was lower, large under-predictions in total RO2 remained. Furthermore, the inclusion of Cl atom chemistry did not enhance the modelled RO2 beyond the first few hours after sunrise and so was unable to resolve the modelled under-prediction in RO2 observed at other times of the day. Model scenarios, in which missing VOC reactivity was included as an additional reaction that converted OH to RO2, highlighted that the modelled OH, HO2 and RO2 concentrations were sensitive to the choice of RO2 product. The level of modelled to measured agreement for HO2 and RO2 (both complex and simple) could be improved if the missing OH reactivity formed a larger RO2 species that was able to undergo reaction with NO, followed by isomerisation reactions reforming other RO2 species, before eventually generating HO2. In this work an α-pinene-derived RO2 species was used as an example. In this simulation, consistent with the experimental budget analysis, the model underestimated the observed OH, indicating a missing OH source. The model uncertainty, with regards to the types of RO2 species present and the radicals they form upon reaction with NO (HO2 directly or another RO2 species), leads to over an order of magnitude less O3 production calculated from the predicted peroxy radicals than calculated from the observed peroxy radicals at the highest NO concentrations. This demonstrates the rate at which the larger RO2 species propagate to HO2, to another RO2 or indeed to OH needs to be understood to accurately simulate the rate of ozone production in environments such as Beijing, where large multifunctional VOCs are likely present.

scholarly journals Comparisons of observed and modeled OH and HO2concentrations during the ambient measurement period of the HOxComp field campaign

2012 ◽  
Vol 12 (5) ◽  
pp. 2567-2585 ◽  
Author(s):  
Y. Kanaya ◽  
A. Hofzumahaus ◽  
H.-P. Dorn ◽  
T. Brauers ◽  
H. Fuchs ◽  
...  
Keyword(s):  
Atmospheric Chemistry ◽  
Chemical Mechanism ◽  
Ozone Production ◽  
High Yield ◽  
Base Case ◽  
Peroxy Radicals ◽  
Field Campaign ◽  
Mixing Ratios ◽  
Measurement Mode ◽  
Single Instrument

Abstract. A photochemical box model constrained by ancillary observations was used to simulate OH and HO2 concentrations for three days of ambient observations during the HOxComp field campaign held in Jülich, Germany in July 2005. Daytime OH levels observed by four instruments were fairly well reproduced to within 33% by a base model run (Regional Atmospheric Chemistry Mechanism with updated isoprene chemistry adapted from Master Chemical Mechanism ver. 3.1) with high R2 values (0.72–0.97) over a range of isoprene (0.3–2 ppb) and NO (0.1–10 ppb) mixing ratios. Daytime HO2(*) levels, reconstructed from the base model results taking into account the sensitivity toward speciated RO2 (organic peroxy) radicals, as recently reported from one of the participating instruments in the HO2 measurement mode, were 93% higher than the observations made by the single instrument. This also indicates an overprediction of the HO2 to OH recycling. Together with the good model-measurement agreement for OH, it implies a missing OH source in the model. Modeled OH and HO2(*) could only be matched to the observations by addition of a strong unknown loss process for HO2(*) that recycles OH at a high yield. Adding to the base model, instead, the recently proposed isomerization mechanism of isoprene peroxy radicals (Peeters and Müller, 2010) increased OH and HO2(*) by 28% and 13% on average. Although these were still only 4% higher than the OH observations made by one of the instruments, larger overestimations (42–70%) occurred with respect to the OH observations made by the other three instruments. The overestimation in OH could be diminished only when reactive alkanes (HC8) were solely introduced to the model to explain the missing fraction of observed OH reactivity. Moreover, the overprediction of HO2(*) became even larger than in the base case. These analyses imply that the rates of the isomerization are not readily supported by the ensemble of radical observations. One of the measurement days was characterized by low isoprene concentrations (∼0.5 ppb) and OH reactivity that was well explained by the observed species, especially before noon. For this selected period, as opposed to the general behavior, the model tended to underestimate HO2(*). We found that this tendency is associated with high NOx concentrations, suggesting that some HO2 production or regeneration processes under high NOx conditions were being overlooked; this might require revision of ozone production regimes.

scholarly journals OH and HO<sub>2</sub> radical chemistry in a midlatitude forest: Measurements and model comparisons

2019 ◽  
Author(s):  
Michelle L. Lew ◽  
Pamela S. Rickly ◽  
Brandon P. Bottorff ◽  
Sofia Sklaveniti ◽  
Thierry Léonardis ◽  
...  
Keyword(s):  
Atmospheric Chemistry ◽  
Global Climate ◽  
Oxidation Products ◽  
Chemical Mechanism ◽  
Ozone Production ◽  
Peroxy Radicals ◽  
Mixing Ratios ◽  
Photolysis Rates ◽  
Model Predictions ◽  
Ho2 Radical

Abstract. Reactions of the hydroxyl (OH) and peroxy radicals (HO2 and RO2) play a central role in the chemistry of the atmosphere. In addition to controlling the lifetimes of many trace gases important to issues of global climate change, OH radical reactions initiate the oxidation of volatile organic compounds (VOCs) which can lead to the production of ozone and secondary organic aerosols in the atmosphere. Previous measurements of these radicals in forest environments characterized by high mixing ratios of isoprene and low mixing ratios of nitrogen oxides (NOx) have shown serious discrepancies with modeled concentrations. These results bring into question our understanding of the atmospheric chemistry of isoprene and other biogenic VOCs under low NOx conditions. During the summer of 2015, OH and HO2 radical concentrations as well as total OH reactivity were measured using Laser-Induced Fluorescence - Fluorescence Assay by Gas Expansion (LIF-FAGE) techniques as part of the Indiana Radical, Reactivity and Ozone Production Intercomparison (IRRONIC). This campaign took place in a forested area near the Indiana University, Bloomington campus characterized by high mixing ratios of isoprene and low mixing ratios of NOx. Supporting measurements of photolysis rates, VOCs, NOx, and other species were used to constrain a zero-dimensional box model based on the Regional Atmospheric Chemistry Mechanism (RACM2) and the Master Chemical Mechanism (MCM). Using an OH chemical scavenger technique, the study revealed the presence of an interference with the LIF-FAGE measurements of OH that increased with both ambient concentrations of ozone and temperature. Subtraction of the interference resulted in measured OH concentrations that were in better agreement with model predictions, although the model still underestimated the measured concentrations, likely due to an underestimation of the concentration of NO at this site. Measurements of HO2 radical concentrations during the campaign included a fraction of isoprene-based peroxy radicals (HO2* = HO2 + αRO2) and were found to agree with model predictions. On average, the measured reactivity was consistent with that calculated from measured OH sinks to within 20 %, with modeled oxidation products accounting for the missing reactivity, although significant missing reactivity (approximately 40 % of the total measured reactivity) was observed on some days.

scholarly journals Global tropospheric effects of aromatic chemistry with the SAPRC-11 mechanism implemented in GEOS-Chem

2018 ◽  
Author(s):  
Yingying Yan ◽  
David Cabrera-Perez ◽  
Jintai Lin ◽  
Andrea Pozzer ◽  
Lu Hu ◽  
...  
Keyword(s):  
Production Efficiency ◽  
Chemical Species ◽  
Oxidation Products ◽  
Chemical Mechanism ◽  
Ozone Production ◽  
Peroxy Radicals ◽  
Mixing Ratios ◽  
Regional Effects ◽  
Source Regions ◽  
Remote Troposphere

Abstract. The GEOS-Chem model has been updated with the SAPRC-11 aromatics chemical mechanism, with the purpose of evaluating global and regional effects of the most abundant aromatics (benzene, toluene, xylenes) on the chemical species important for tropospheric oxidation capacity. The model evaluation based on surface and aircraft observations indicates good agreement for aromatics and ozone. A comparison between scenarios in GEOS-Chem with simplified aromatic chemistry (as in the standard setup, with no ozone formation from related peroxy radicals or recycling of NOx) and with the SAPRC-11 scheme reveals relatively slight changes in ozone, hydroxyl radical, and nitrogen oxides on a global mean basis (1–4 %), although remarkable regional differences (5–20 %) exist near the source regions. NOx decreases over the source regions and increases in the remote troposphere, due mainly to more efficient transport of peroxyacetyl nitrate (PAN), which is increased with the SAPRC aromatic chemistry. Model ozone mixing ratios with the updated aromatic chemistry increase by up to 5 ppb (more than 10 %), especially in industrially polluted regions. The ozone change is partly due to the direct influence of aromatic oxidation products on ozone production rates, and in part to the altered spatial distribution of NOx that enhances the tropospheric ozone production efficiency. Improved representation of aromatics is important to simulate the tropospheric oxidation.

scholarly journals Global tropospheric effects of aromatic chemistry with the SAPRC-11 mechanism implemented in GEOS-Chem version 9-02

2019 ◽  
Vol 12 (1) ◽  
pp. 111-130 ◽  
Author(s):  
Yingying Yan ◽  
David Cabrera-Perez ◽  
Jintai Lin ◽  
Andrea Pozzer ◽  
Lu Hu ◽  
...  
Keyword(s):  
Production Efficiency ◽  
Chemical Species ◽  
Oxidation Products ◽  
Chemical Mechanism ◽  
Ozone Production ◽  
Peroxy Radicals ◽  
Mixing Ratios ◽  
Earth Observing System ◽  
Source Regions ◽  
Remote Troposphere

Abstract. The Goddard Earth Observing System with chemistry (GEOS-Chem) model has been updated with the State-wide Air Pollution Research Center version 11 (SAPRC-11) aromatics chemical mechanism, with the purpose of evaluating global and regional effects of the most abundant aromatics (benzene, toluene, xylenes) on the chemical species important for tropospheric oxidation capacity. The model evaluation based on surface and aircraft observations indicates good agreement for aromatics and ozone. A comparison between scenarios in GEOS-Chem with simplified aromatic chemistry (as in the standard setup, with no ozone formation from related peroxy radicals or recycling of NOx) and with the SAPRC-11 scheme reveals relatively slight changes in ozone, the hydroxyl radical, and nitrogen oxides on a global mean basis (1 %–4 %), although remarkable regional differences (5 %–20 %) exist near the source regions. NOx decreases over the source regions and increases in the remote troposphere, due mainly to more efficient transport of peroxyacetyl nitrate (PAN), which is increased with the SAPRC aromatic chemistry. Model ozone mixing ratios with the updated aromatic chemistry increase by up to 5 ppb (more than 10 %), especially in industrially polluted regions. The ozone change is partly due to the direct influence of aromatic oxidation products on ozone production rates, and in part to the altered spatial distribution of NOx that enhances the tropospheric ozone production efficiency. Improved representation of aromatics is important to simulate the tropospheric oxidation.

scholarly journals Understanding in situ ozone production in the summertime through radical observations and modelling studies during the Clean air for London project (ClearfLo)

2017 ◽  
Author(s):  
Lisa K. Whalley ◽  
Daniel Stone ◽  
Rachel Dunmore ◽  
Jacqueline Hamilton ◽  
James R. Hopkins ◽  
...  
Keyword(s):  
Peroxy Radical ◽  
Box Model ◽  
Chemical Mechanism ◽  
Ozone Production ◽  
Peroxy Radicals ◽  
Sink Term ◽  
Modelling Studies ◽  
Order Of Magnitude ◽  
Clean Air

Abstract. Measurements of OH, HO2, RO2i (alkene and aromatic related RO2) and total RO2 radicals taken during the ClearfLo campaign in central London in the summer of 2012 are presented. A photostationary steady-state calculation of OH which considered measured OH reactivity as the OH sink term and the measured OH sources (of which HO2+NO reaction and HONO photolysis dominated) compared well with the observed levels of OH. Comparison with calculations from a detailed box model utilising the Master Chemical Mechanism v3.2, however, highlighted a substantial discrepancy between radical observations under lower NOx conditions ([NO]  3 ppbv) the box model increasingly under-predicted total [RO2]. The modelled and observed HO2 were in agreement, however, under elevated NO concentrations ranging from 7–15 ppbv. The model uncertainty under low NO conditions leads to more ozone production predicted using modelled peroxy radical concentrations (~ 3 ppbv hr−1) versus ozone production from peroxy radicals measured (~ 1 ppbv hr−1). Conversely, ozone production derived from the predicted peroxy radicals is up to an order of magnitude lower than from the observed peroxy radicals as [NO] increases beyond 7 ppbv due to the model under-prediction of RO2 under these conditions.

scholarly journals OH and HO<sub>2</sub> radical chemistry in a midlatitude forest: measurements and model comparisons

2020 ◽  
Vol 20 (15) ◽  
pp. 9209-9230
Author(s):  
Michelle M. Lew ◽  
Pamela S. Rickly ◽  
Brandon P. Bottorff ◽  
Emily Reidy ◽  
Sofia Sklaveniti ◽  
...  
Keyword(s):  
Atmospheric Chemistry ◽  
Global Climate ◽  
Oxidation Products ◽  
Chemical Mechanism ◽  
Ozone Production ◽  
Daily Maximum ◽  
Peroxy Radicals ◽  
Mixing Ratios ◽  
Photolysis Rates ◽  
Model Predictions

Abstract. Reactions of the hydroxyl (OH) and peroxy (HO2 and RO2) radicals play a central role in the chemistry of the atmosphere. In addition to controlling the lifetimes of many trace gases important to issues of global climate change, OH radical reactions initiate the oxidation of volatile organic compounds (VOCs) which can lead to the production of ozone and secondary organic aerosols in the atmosphere. Previous measurements of these radicals in forest environments characterized by high mixing ratios of isoprene and low mixing ratios of nitrogen oxides (NOx) (typically less than 1–2 ppb) have shown serious discrepancies with modeled concentrations. These results bring into question our understanding of the atmospheric chemistry of isoprene and other biogenic VOCs under low NOx conditions. During the summer of 2015, OH and HO2 radical concentrations, as well as total OH reactivity, were measured using laser-induced fluorescence–fluorescence assay by gas expansion (LIF-FAGE) techniques as part of the Indiana Radical Reactivity and Ozone productioN InterComparison (IRRONIC). This campaign took place in a forested area near Indiana University's Bloomington campus which is characterized by high mixing ratios of isoprene (average daily maximum of approximately 4 ppb at 28 ∘C) and low mixing ratios of NO (diurnal average of approximately 170 ppt). Supporting measurements of photolysis rates, VOCs, NOx, and other species were used to constrain a zero-dimensional box model based on the Regional Atmospheric Chemistry Mechanism (RACM2) and the Master Chemical Mechanism (MCM 3.2), including versions of the Leuven isoprene mechanism (LIM1) for HOx regeneration (RACM2-LIM1 and MCM 3.3.1). Using an OH chemical scavenger technique, the study revealed the presence of an interference with the LIF-FAGE measurements of OH that increased with both ambient concentrations of ozone and temperature with an average daytime maximum equivalent OH concentration of approximately 5×106 cm−3. Subtraction of the interference resulted in measured OH concentrations of approximately 4×106 cm−3 (average daytime maximum) that were in better agreement with model predictions although the models underestimated the measurements in the evening. The addition of versions of the LIM1 mechanism increased the base RACM2 and MCM 3.2 modeled OH concentrations by approximately 20 % and 13 %, respectively, with the RACM2-LIM1 mechanism providing the best agreement with the measured concentrations, predicting maximum daily OH concentrations to within 30 % of the measured concentrations. Measurements of HO2 concentrations during the campaign (approximately a 1×109 cm−3 average daytime maximum) included a fraction of isoprene-based peroxy radicals (HO2*=HO2+αRO2) and were found to agree with model predictions to within 10 %–30 %. On average, the measured reactivity was consistent with that calculated from measured OH sinks to within 20 %, with modeled oxidation products accounting for the missing reactivity, however significant missing reactivity (approximately 40 % of the total measured reactivity) was observed on some days.

scholarly journals Comparisons of observed and modeled OH and HO<sub>2</sub> concentrations during the ambient measurement period of the HO<sub>x</sub>Comp field campaign

2011 ◽  
Vol 11 (10) ◽  
pp. 28851-28894 ◽  
Author(s):  
Y. Kanaya ◽  
A. Hofzumahaus ◽  
H.-P. Dorn ◽  
T. Brauers ◽  
H. Fuchs ◽  
...  
Keyword(s):  
Atmospheric Chemistry ◽  
Chemical Mechanism ◽  
Ozone Production ◽  
Peroxy Radicals ◽  
Field Campaign ◽  
Mixing Ratios ◽  
Measurement Mode ◽  
Master Chemical Mechanism ◽  
Regeneration Processes ◽  
Measurement Period

Abstract. A photochemical box model constrained by ancillary observations was used to simulate OH and HO2 concentrations for three days of ambient observations during the HOxComp field campaign held in Jülich, Germany in July 2005. OH and HO2 levels, observed by four and three instruments, respectively, were fairly well reproduced to within 33% by a base model run (Regional Atmospheric Chemistry Mechanism with updated isoprene chemistry adapted from Master Chemical Mechanism ver. 3.1) with high R2 values (0.72–0.97) over a range of isoprene (0.3–2 ppb) and NO (0.1–10 ppb) mixing ratios. Adding isomerization of isoprene peroxy radicals to the model increased OH and HO2 by 43% and 48% on average. Although these are still only 15% and 21% higher than the observations made by one of the instruments, larger overestimations (>60%) occurred with respect to the observations made by the other three instruments, suggesting that the rates of the isomerization were not readily supported by the ensemble of radical observations. These model runs tend to underestimate observed OH reactivity which may be explained by unmeasured hydrocarbon species. By selecting hydrocarbon types to be added to the model in amounts that accounted for the missing fractions of observed OH reactivity, the gaps between HOx observations and model results with and without isomerization could be individually diminished to within uncertainty levels. In this case, however, the HO2/OH ratio rose on addition of hydrocarbons and diverged from observations. In the case where we used modeled HO2(*), taking into account the sensitivity toward speciated RO2 (organic peroxy) radicals, as recently reported from one of the participating instruments in the HO2 measurement mode, the model's overestimation for HO2 became evident (by factors of more than 1.8). These results strongly indicated that more loss processes for peroxy radicals were necessary to explain the observations. One of the measurement days was characterized by low isoprene concentrations (~0.5 ppb) and OH reactivity that was well explained by the observed species, especially before noon. For this selected period, as opposed to the general behavior, the model tended to underestimate HO2 (and HO2(*)) with respect to observations made by the three instruments. We found that this tendency is associated with high NOx concentrations, suggesting that some HO2 production or HO2 regeneration processes under high NOx conditions were being overlooked; this might require revision of ozone production regimes.

scholarly journals Impact of a new condensed toluene mechanism on air quality model predictions in the US

2010 ◽  
Vol 3 (4) ◽  
pp. 2291-2314
Author(s):  
G. Sarwar ◽  
K. W. Appel ◽  
A. G. Carlton ◽  
R. Mathur ◽  
K. Schere ◽  
...  
Keyword(s):  
Air Quality ◽  
Los Angeles ◽  
Production Efficiency ◽  
Sensitivity Study ◽  
Chemical Mechanism ◽  
Ozone Production ◽  
Daily Maximum ◽  
Air Quality Model ◽  
Quality Model ◽  
Mixing Ratios

Abstract. A new condensed toluene mechanism is incorporated into the Community Multiscale Air Quality Modeling system. Model simulations are performed using the CB05 chemical mechanism containing the existing (base) and the new toluene mechanism for the western and eastern US for a summer month. With current estimates of tropospheric emission burden, the new toluene mechanism increases monthly mean daily maximum 8-h ozone by 1.0–3.0 ppbv in Los Angeles, Portland, Seattle, Chicago, Cleveland, northeastern US, and Detroit compared to that with the base toluene chemistry. It reduces model mean bias for ozone at elevated observed ozone mixing ratios. While the new mechanism increases predicted ozone, it does not enhance ozone production efficiency. Sensitivity study suggests that it can further enhance ozone if elevated toluene emissions are present. While changes in total fine particulate mass are small, predictions of in-cloud SOA increase substantially.

scholarly journals Measurements of OH and HO<sub>2</sub> concentrations during the MCMA-2006 field campaign – Part 2: Model comparison and radical budget

2009 ◽  
Vol 9 (18) ◽  
pp. 6655-6675 ◽  
Author(s):  
S. Dusanter ◽  
D. Vimal ◽  
P. S. Stevens ◽  
R. Volkamer ◽  
L. T. Molina ◽  
...  
Keyword(s):  
Model Comparison ◽  
Chemical Species ◽  
Propagation Rate ◽  
Daily Basis ◽  
Chemical Mechanism ◽  
Atmospheric Models ◽  
Field Campaign ◽  
Mixing Ratios ◽  
Field Campaigns ◽  
Test Current

Abstract. Measurements of hydroxyl (OH) and hydroperoxy (HO2) radicals were made during the Mexico City Metropolitan Area (MCMA) field campaign as part of the MILAGRO (Megacity Initiative: Local and Global Research Observations) project during March 2006. These measurements provide a unique opportunity to test current models of atmospheric ROx (OH + HO2 + RO2) photochemistry under polluted conditions. A zero-dimensional box model based on the Regional Atmospheric Chemical Mechanism (RACM) was constrained by 10-min averages of 24 J-values and the concentrations of 97 chemical species. Several issues related to the ROx chemistry under polluted conditions are highlighted in this study: (i) Measured concentrations of both OH and HO2 were underpredicted during morning hours on a median campaign basis, suggesting a significant source of radicals is missing from current atmospheric models under polluted conditions, consistent with previous urban field campaigns. (ii) The model-predicted HO2/OH ratios underestimate the measurements for NO mixing ratios higher than 5 ppb, also consistent with previous urban field campaigns. This suggests that under high NOx conditions, the HO2 to OH propagation rate may be overestimated by the model or a process converting OH into HO2 may be missing from the chemical mechanism. On a daily basis (08:40 a.m.–06:40 p.m.), an analysis of the radical budget indicates that HONO photolysis, HCHO photolysis, O3-alkene reactions and dicarbonyls photolysis are the main radical sources. O3 photolysis contributes to less than 6% of the total radical production.

scholarly journals Peroxy radical chemistry and the control of ozone photochemistry at Mace Head, Ireland during the summer of 2002

2006 ◽  
Vol 6 (8) ◽  
pp. 2193-2214 ◽  
Author(s):  
Z. L. Fleming ◽  
P. S. Monks ◽  
A. R. Rickard ◽  
D. E. Heard ◽  
W. J. Bloss ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Production Rate ◽  
Marine Boundary Layer ◽  
Strong Dependence ◽  
Peroxy Radical ◽  
Chemical Mechanism ◽  
Ozone Production ◽  
Peroxy Radicals ◽  
Night Time ◽  
Model Measurement

Abstract. Peroxy radical (HO2+ΣRO2) measurements, using the PEroxy Radical Chemical Amplification (PERCA) technique at the North Atlantic Marine Boundary Layer EXperiment (NAMBLEX) at Mace Head in summer 2002, are presented and put into the context of marine, boundary-layer chemistry. A suite of other chemical parameters (NO, NO2, NO3, CO, CH4, O3, VOCs, peroxides), photolysis frequencies and meteorological measurements, are used to present a detailed analysis of the role of peroxy radicals in tropospheric oxidation cycles and ozone formation. Under the range of conditions encountered the peroxy radical daily maxima varied from 10 to 40 pptv. The diurnal cycles showed an asymmetric shape typically shifted to the afternoon. Using a box model based on the master chemical mechanism the average model measurement agreement was 2.5 across the campaign. The addition of halogen oxides to the model increases the level of model/measurement agreement, apparently by respeciation of HOx. A good correlation exists between j(HCHO).[HCHO] and the peroxy radicals indicative of the importance of HCHO in the remote atmosphere as a HOx source, particularly in the afternoon. The peroxy radicals showed a strong dependence on [NO2] with a break point at 0.1 ppbv, where the radicals increased concomitantly with the reactive VOC loading, this is a lower value than seen at representative urban campaigns. The HO2/(HO2+ΣRO2) ratios are dependent on [NOx] ranging between 0.2 and 0.6, with the ratio increasing linearly with NOx. Significant night-time levels of peroxy radicals were measured up to 25 pptv. The contribution of ozone-alkenes and NO3-alkene chemistry to night-time peroxy radical production was shown to be on average 59 and 41%. The campaign mean net ozone production rate was 0.11±0.3 ppbv h-1. The ozone production rate was strongly dependent on [NO] having linear sensitivity (dln(P(O3))/dln(NO)=1.0). The results imply that the N(O3) (the in-situ net photochemical rate of ozone production/destruction) will be strongly sensitive in the marine boundary layer to small changes in [NO] which has ramifications for changing NOx loadings in the European continental boundary layer.

Sign in / Sign up

Export Citation Format

Share Document