scholarly journals Inter-calibrating SMMR brightness temperatures over continental surfaces

2020 ◽  
Author(s):  
Samuel Favrichon ◽  
Carlos Jimenez ◽  
Catherine Prigent
Keyword(s):  
Land Surface ◽  
Microwave Remote Sensing ◽  
Calibration Method ◽  
Diurnal Cycles ◽  
Brightness Temperatures ◽  
Linear Correction ◽  
Long Time ◽  
Microwave Imager ◽  
Microwave Radiometers ◽  
Global Precipitation

Abstract. Microwave remote sensing can be used to monitor the time evolution of some key parameters over land, such as land surface temperature or surface water extent. Observations are made with instrument such as the Scanning Microwave Multichannel Radiometer (SMMR) before 1987, the Special Sensor Microwave/Imager (SSM/I) and the following Special Sensor Microwave Imager/Sounder (SSMIS) from 1987 and still operating, to the more recent Global Precipitation Mission Microwave Imager (GMI). As these instruments differ on some of their characteristics and use different calibration schemes, they need to be inter-calibrated before long time series products can be derived from the observations. Here an inter-calibration method is designed to remove major inconsistencies between the SMMR and other microwave radiometers for the 18 GHz and 37 GHz channels over continental surfaces. Because of a small overlap in observations and a ~6 h difference in overpassing times between SMMR and SSM/I, GMI was chosen as a reference despite the lack of a common observing period. The diurnal cycles from three years of GMI brightness temperatures are first calculated, and then used to evaluate SMMR differences. Based on a statistical analysis of the differences, a simple linear correction is implemented to calibrate SMMR on GMI. This correction is shown to also reduce the biases between SMMR and SSM/I, and can then be applied to SMMR observations to make them more coherent with existing data record of microwave brightness temperatures over continental surfaces.

scholarly journals Inter-calibrating SMMR brightness temperatures over continental surfaces

2020 ◽  
Vol 13 (10) ◽  
pp. 5481-5490
Author(s):  
Samuel Favrichon ◽  
Carlos Jimenez ◽  
Catherine Prigent
Keyword(s):  
Land Surface ◽  
Microwave Remote Sensing ◽  
Calibration Method ◽  
Diurnal Cycles ◽  
Brightness Temperatures ◽  
Linear Correction ◽  
Long Time ◽  
Microwave Imager ◽  
Microwave Radiometers ◽  
Global Precipitation

Abstract. Microwave remote sensing can be used to monitor the time evolution of some key parameters over land, such as land surface temperature or surface water extent. Observations are made with instruments, such as the Scanning Microwave Multichannel Radiometer (SMMR) before 1987, the Special Sensor Microwave/Imager (SSM/I) and the subsequent Special Sensor Microwave Imager/Sounder (SSMIS) from 1987 and still operating, and the more recent Global Precipitation Measurement Microwave Imager (GMI). As these instruments differ on some of their characteristics and use different calibration schemes, they need to be inter-calibrated before long-time-series products can be derived from the observations. Here an inter-calibration method is designed to remove major inconsistencies between the SMMR and other microwave radiometers for the 18 and 37 GHz channels over continental surfaces. Because of a small overlap in observations and a ∼6 h difference in overpassing times between SMMR and SSM/I, GMI was chosen as a reference despite the lack of a common observing period. The diurnal cycles from 3 years of GMI brightness temperatures are first calculated and then used to evaluate SMMR differences. Based on a statistical analysis of the differences, a simple linear correction is implemented to calibrate SMMR on GMI. This correction is shown to also reduce the biases between SMMR and SSM/I, and can then be applied to SMMR observations to make them more coherent with existing data records of microwave brightness temperatures over continental surfaces.

Advanced Rain/No-Rain Classification Methods for Microwave Radiometer Observations over Land

2008 ◽  
Vol 47 (11) ◽  
pp. 3016-3029 ◽  
Author(s):  
Shinta Seto ◽  
Takuji Kubota ◽  
Nobuhiro Takahashi ◽  
Toshio Iguchi ◽  
Taikan Oki
Keyword(s):  
Brightness Temperature ◽  
Land Surface ◽  
Microwave Radiometer ◽  
Tropical Rainfall Measuring Mission ◽  
Rain Gauge ◽  
Retrieval Algorithm ◽  
Microwave Imager ◽  
Microwave Radiometers ◽  
Trmm Microwave Imager ◽  
Global Precipitation

Abstract Seto et al. developed rain/no-rain classification (RNC) methods over land for the Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI). In this study, the methods are modified for application to other microwave radiometers. The previous methods match TMI observations with TRMM precipitation radar (PR) observations, classify the TMI pixels into rain pixels and no-rain pixels, and then statistically summarize the observed brightness temperature at the no-rain pixels into a land surface brightness temperature database. In the modified methods, the probability distribution of brightness temperature under no-rain conditions is derived from unclassified TMI pixels without the use of PR. A test with the TMI shows that the modified (PR independent) methods are better than the RNC method developed for the Goddard profiling algorithm (GPROF; the standard algorithm for the TMI) while they are slightly poorer than corresponding previous (PR dependent) methods. M2d, one of the PR-independent methods, is applied to observations from the Advanced Microwave Scanning Radiometer for Earth Observing Satellite (AMSR-E), is evaluated for a matchup case with PR, and is evaluated for 1 yr with a rain gauge dataset in Japan. M2d is incorporated into a retrieval algorithm developed by the Global Satellite Mapping of Precipitation project to be applied for the AMSR-E. In latitudes above 30°N, the rain-rate retrieval is compared with a rain gauge dataset by the Global Precipitation Climatology Center. Without a snow mask, a large amount of false rainfall due to snow contamination occurs. Therefore, a simple snow mask using the 23.8-GHz channel is applied and the threshold of the mask is optimized. Between 30° and 60°N, the optimized snow mask forces the miss of an estimated 10% of the total rainfall.

scholarly journals Detecting cloud contamination in passive microwave satellite measurements over land

2019 ◽  
Vol 12 (3) ◽  
pp. 1531-1543 ◽  
Author(s):  
Samuel Favrichon ◽  
Catherine Prigent ◽  
Carlos Jimenez ◽  
Filipe Aires
Keyword(s):  
Surface Temperature ◽  
Land Surface ◽  
Cloud Formation ◽  
Temperature Estimation ◽  
Near Surface ◽  
Brightness Temperatures ◽  
Infrared Imager ◽  
Microwave Imager ◽  
Successive Generations ◽  
Global Precipitation

Abstract. Remotely sensed brightness temperatures from passive observations in the microwave (MW) range are used to retrieve various geophysical parameters, e.g. near-surface temperature. Cloud contamination, although less of an issue at MW than at visible to infrared wavelengths, may adversely affect retrieval quality, particularly in the presence of strong cloud formation (convective towers) or precipitation. To limit errors associated with cloud contamination, we present an index derived from stand-alone MW brightness temperature observations, which measure the probability of residual cloud contamination. The method uses a statistical neural network model trained with the Global Precipitation Microwave Imager (GMI) observations and a cloud classification from Meteosat Second Generation-Spinning Enhanced Visible and Infrared Imager (MSG-SEVIRI). This index is available over land and ocean and is developed for multiple frequency ranges to be applicable to successive generations of MW imagers. The index confidence increases with the number of available frequencies and performs better over the ocean, as expected. In all cases, even for the more challenging radiometric signatures over land, the model reaches an accuracy of ≥70 % in detecting contaminated observations. Finally an application of this index is shown that eliminates grid cells unsuitable for land surface temperature estimation.

scholarly journals Optimization of Cloud-Radiation Databases for Passive Microwave Precipitation Retrievals over Ocean

2016 ◽  
Vol 33 (8) ◽  
pp. 1649-1671 ◽  
Author(s):  
Eun-Kyoung Seo ◽  
Sung-Dae Yang ◽  
Mircea Grecu ◽  
Geun-Hyeok Ryu ◽  
Guosheng Liu ◽  
...  
Keyword(s):  
Tropical Rainfall Measuring Mission ◽  
Optimization Method ◽  
Passive Microwave ◽  
Brightness Temperatures ◽  
Precipitation Measurement ◽  
Microwave Imager ◽  
Microwave Radiometers ◽  
Trmm Microwave Imager ◽  
Global Precipitation Measurement ◽  
Global Precipitation

AbstractUsing Tropical Rainfall Measuring Mission (TRMM) observations from storms collected over the oceans surrounding East Asia, during summer, a method of creating physically consistent cloud-radiation databases to support satellite radiometer retrievals is introduced. In this method, vertical profiles of numerical model-simulated cloud and precipitation fields are optimized against TRMM radar and radiometer observations using a hybrid empirical orthogonal function (EOF)–one-dimensional variational (1DVAR) approach.The optimization is based on comparing simulated to observed radar reflectivity profiles and the corresponding passive microwave observations at the frequencies of the TRMM Microwave Imager (TMI) instrument. To minimize the discrepancies between the actual and the synthetic observations, the simulated cloud and precipitation profiles are optimized by adjusting the contents of the hydrometeors. To reduce the dimension of the hydrometeor content profiles in the optimization, multivariate relations among hydrometeor species are used.After applying the optimization method to modify the simulated clouds, the optimized cloud-radiation database has a joint distribution of reflectivity and associated brightness temperatures that is considerably closer to that observed by TRMM PR and TMI, especially at 85 GHz. This implies that the EOF–1DVAR approach can generate profiles with realistic distributions of frozen hydrometeors, such as snow and graupel. This approach may be similarly adapted to operate with the variety and capabilities of the passive microwave radiometers that compose the Global Precipitation Measurement (GPM) constellation. Furthermore, it can be extended to other oceanic regions and seasons.

Combined Radar and Radiometer Analysis of Precipitation Profiles for a Parametric Retrieval Algorithm

2005 ◽  
Vol 22 (7) ◽  
pp. 909-929 ◽  
Author(s):  
Hirohiko Masunaga ◽  
Christian D. Kummerow
Keyword(s):  
A Priori ◽  
Three Dimensional ◽  
Tropical Rainfall Measuring Mission ◽  
Dimensional Structure ◽  
Retrieval Algorithm ◽  
Brightness Temperatures ◽  
Precipitation Measurement ◽  
Microwave Imager ◽  
Trmm Microwave Imager ◽  
Global Precipitation

Abstract A methodology to analyze precipitation profiles using the Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI) and precipitation radar (PR) is proposed. Rainfall profiles are retrieved from PR measurements, defined as the best-fit solution selected from precalculated profiles by cloud-resolving models (CRMs), under explicitly defined assumptions of drop size distribution (DSD) and ice hydrometeor models. The PR path-integrated attenuation (PIA), where available, is further used to adjust DSD in a manner that is similar to the PR operational algorithm. Combined with the TMI-retrieved nonraining geophysical parameters, the three-dimensional structure of the geophysical parameters is obtained across the satellite-observed domains. Microwave brightness temperatures are then computed for a comparison with TMI observations to examine if the radar-retrieved rainfall is consistent in the radiometric measurement space. The inconsistency in microwave brightness temperatures is reduced by iterating the retrieval procedure with updated assumptions of the DSD and ice-density models. The proposed methodology is expected to refine the a priori rain profile database and error models for use by parametric passive microwave algorithms, aimed at the Global Precipitation Measurement (GPM) mission, as well as a future TRMM algorithms.

scholarly journals Fundamental Climate Data Records of Microwave Brightness Temperatures

2018 ◽  
Vol 10 (8) ◽  
pp. 1306 ◽  
Author(s):  
Wesley Berg ◽  
Rachael Kroodsma ◽  
Christian Kummerow ◽  
Darren McKague
Keyword(s):  
Land Surface ◽  
Surface Wind ◽  
Precipitable Water ◽  
Original Data ◽  
Climate Data ◽  
Sea Ice Extent ◽  
Brightness Temperatures ◽  
Precipitation Total ◽  
Data Record ◽  
Microwave Imager

An intercalibrated Fundamental Climate Data Record (FCDR) of brightness temperatures (Tb) has been developed using data from a total of 14 research and operational conical-scanning microwave imagers. This dataset provides a consistent 30+ year data record of global observations that is well suited for retrieving estimates of precipitation, total precipitable water, cloud liquid water, ocean surface wind speed, sea ice extent and concentration, snow cover, soil moisture, and land surface emissivity. An initial FCDR was developed for a series of ten Special Sensor Microwave/Imager (SSM/I) and Special Sensor Microwave Imager Sounder (SSMIS) instruments on board the Defense Meteorological Satellite Program spacecraft. An updated version of this dataset, including additional NASA and Japanese sensors, has been developed as part of the Global Precipitation Measurement (GPM) mission. The FCDR development efforts involved quality control of the original data, geolocation corrections, calibration corrections to account for cross-track and time-dependent calibration errors, and intercalibration to ensure consistency with the calibration reference. Both the initial SSMI(S) and subsequent GPM Level 1C FCDR datasets are documented, updated in near real-time, and publicly distributed.

scholarly journals The AMSU-Based Hydrological Bundle Climate Data Record—Description and Comparison with Other Data Sets

2018 ◽  
Vol 10 (10) ◽  
pp. 1640 ◽  
Author(s):  
Ralph Ferraro ◽  
Brian Nelson ◽  
Tom Smith ◽  
Olivier Prat
Keyword(s):  
Land Surface ◽  
Snow Water Equivalent ◽  
Precipitable Water ◽  
Climate Data ◽  
Sea Ice Concentration ◽  
Data Set ◽  
Data Record ◽  
Microwave Imager ◽  
Global Precipitation ◽  
Climate Data Record

Passive microwave measurements have been available on satellites back to the 1970s, first flown on research satellites developed by the National Aeronautics and Space Administration (NASA). Since then, several other sensors have been flown to retrieve hydrological products for both operational weather applications (e.g., the Special Sensor Microwave/Imager—SSM/I; the Advanced Microwave Sounding Unit—AMSU) and climate applications (e.g., the Advanced Microwave Scanning Radiometer—AMSR; the Tropical Rainfall Measurement Mission Microwave Imager—TMI; the Global Precipitation Mission Microwave Imager—GMI). Here, the focus is on measurements from the AMSU-A, AMSU-B, and Microwave Humidity Sounder (MHS). These sensors have been in operation since 1998, with the launch of NOAA-15, and are also on board NOAA-16, -17, -18, -19, and the MetOp-A and -B satellites. A data set called the “Hydrological Bundle” is a climate data record (CDR) that utilizes brightness temperatures from fundamental CDRs (FCDRs) to generate thematic CDRs (TCDRs). The TCDRs include total precipitable water (TPW), cloud liquid water (CLW), sea-ice concentration (SIC), land surface temperature (LST), land surface emissivity (LSE) for 23, 31, 50 GHz, rain rate (RR), snow cover (SC), ice water path (IWP), and snow water equivalent (SWE). The TCDRs are shown to be in general good agreement with similar products from other sources, such as the Global Precipitation Climatology Project (GPCP) and the Modern-Era Retrospective Analysis for Research and Applications (MERRA-2). Due to the careful intercalibration of the FCDRs, little bias is found among the different TCDRs produced from individual NOAA and MetOp satellites, except for normal diurnal cycle differences.

scholarly journals Tropical Cyclone Rain Retrievals from FY-3B MWRI Brightness Temperatures Using the Goddard Profiling Algorithm (GPROF)

2019 ◽  
Vol 36 (5) ◽  
pp. 849-864 ◽  
Author(s):  
Ruanyu Zhang ◽  
Christian D. Kummerow ◽  
David L. Randel ◽  
Paula J. Brown ◽  
Wesley Berg ◽  
...  
Keyword(s):  
Tropical Cyclone ◽  
A Priori ◽  
Dual Frequency ◽  
Ancillary Data ◽  
Light Rain ◽  
Brightness Temperatures ◽  
The Mean ◽  
Microwave Imager ◽  
Rain Rates ◽  
Global Precipitation

AbstractThis study focuses on the tropical cyclone rainfall retrieval using FY-3B Microwave Radiation Imager (MWRI) brightness temperatures (Tbs). The GPROF, a fully parametric approach based on the Bayesian scheme, is adapted for use by the MWRI sensor. The MWRI GPROF algorithm is an ocean-only scheme used to estimate rain rates and hydrometeor vertical profiles. An a priori database is constructed from MWRI simulated Tbs, the GPM Microwave Imager (GMI) and Dual-Frequency Precipitation Radar (DPR) combined data, and ancillary data resulting in about 100 000 rainfall profiles. The performance of MWRI retrievals is consistent with DPR observations, even though MWRI retrievals slightly overestimate low rain rates and underestimate high rain rates. The total bias of MWRI retrievals is less than 13% of the mean rain rate of DPR precipitation. Statistical comparisons over GMI GPROF, GMI Hurricane GPROF (HGPROF), and MWRI GPROF retrievals show MWRI GPROF retrievals are consistent in terms of spatial distribution and rain estimates for TCs compared with the other two estimates. In terms of the global precipitation, the mean rain rates at different distances from best track locations for five TC categories are used to identify substantial differences between mean MWRI and GMI GPROF retrievals. After correcting the biases between MWRI and GMI retrievals, the performance of MWRI retrievals shows slight overestimate for light rain rates while underestimating rain rates near the eyewall for category 4 and 5 only.

scholarly journals Analysis of the Global Microwave Polarization Data of Clouds

2018 ◽  
Vol 32 (1) ◽  
pp. 3-13 ◽  
Author(s):  
Xiping Zeng ◽  
Gail Skofronick-Jackson ◽  
Lin Tian ◽  
Amber E. Emory ◽  
William S. Olson ◽  
...  
Keyword(s):  
Weather Prediction ◽  
Radar Data ◽  
Ice Crystals ◽  
Ice Particles ◽  
Precipitation Measurement ◽  
Wave Imaging ◽  
Microwave Imager ◽  
Climate Analysis ◽  
Microwave Radiometers ◽  
Global Precipitation

Abstract Information about the characteristics of ice particles in clouds is necessary for improving our understanding of the states, processes, and subsequent modeling of clouds and precipitation for numerical weather prediction and climate analysis. Two NASA passive microwave radiometers, the satellite-borne Global Precipitation Measurement (GPM) Microwave Imager (GMI) and the aircraft-borne Conical Scanning Millimeter-Wave Imaging Radiometer (CoSMIR), measure vertically and horizontally polarized microwaves emitted by clouds (including precipitating particles) and Earth’s surface below. In this paper, GMI (or CoSMIR) data are analyzed with CloudSat (or aircraft-borne radar) data to find polarized difference (PD) signals not affected by the surface, thereby obtaining the information on ice particles. Statistical analysis of 4 years of GMI and CloudSat data, for the first time, reveals that optically thick clouds contribute positively to GMI PD at 166 GHz over all the latitudes and their positive magnitude of 166-GHz GMI PD varies little with latitude. This result suggests that horizontally oriented ice crystals in thick clouds are common from the tropics to high latitudes, which contrasts the result of Cloud–Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) that horizontally oriented ice crystals are rare in optically thin ice clouds.

Daily Rainfall Estimate by Emissivity Temporal Variation from 10 Satellites

2021 ◽  
Author(s):  
Yalei You ◽  
S. Joseph Munchak ◽  
Christa Peters-Lidard ◽  
Sarah Ringerud
Keyword(s):  
Temporal Variation ◽  
Low Frequency ◽  
Daily Rainfall ◽  
Passive Microwave ◽  
Advanced Technology ◽  
Precipitation Measurement ◽  
Comparable Performance ◽  
Microwave Imager ◽  
Microwave Radiometers ◽  
Global Precipitation

AbstractRainfall retrieval algorithms for passive microwave radiometers often exploits the brightness temperature depression due to ice scattering at high frequency channels (≥ 85 GHz) over land. This study presents an alternate method to estimate the daily rainfall amount using the emissivity temporal variation (i.e., Δe) under rain-free conditions at low frequency channels (19, 24 and 37 GHz). Emissivity is derived from 10 passive microwave radiometers, including the Global Precipitation Measurement (GPM) Microwave Imager (GMI), the Advanced Microwave Scanning Radiometer 2 (AMSR2), three Special Sensor Microwave Imager/Sounder (SSMIS), the Advanced Technology Microwave Sounder (ATMS), and four Advanced Microwave Sounding Unit-A (AMSU-A). Four different satellite combination schemes are used to derive the Δe for daily rainfall estimates. They are all-10-satellites, 5-imagers, 6-satellites with very different equator crossing times, and GMI-only. Results show that Δe from all-10-satellites has the best performance with a correlation of 0.60 and RMSE of 6.52 mm, comparing with the integrated multi-satellite retrievals (IMERG) final run product. The 6-satellites scheme has comparable performance with all-10-satellites scheme. The 5-imagers scheme performs noticeably worse with a correlation of 0.49 and RMSE of 7.28 mm, while the GMI-only scheme performs the worst with a correlation of 0.25 and RMSE of 11.36 mm. The inferior performance from the 5-imagers and GMI-only schemes can be explained by the much longer revisit time, which cannot accurately capture the emissivity temporal variation.

Sign in / Sign up

Export Citation Format

Share Document