The Collection 6 MODIS aerosol products over land and ocean

Abstract. The twin Moderate resolution Imaging Spectroradiometer (MODIS) sensors have been flying on Terra since 2000 and Aqua since 2002, creating an extensive data set of global Earth observations. Here, we introduce the Collection 6 (C6) algorithm to retrieve aerosol optical depth (AOD) and aerosol size parameters from MODIS-observed spectral reflectance. While not a major overhaul from the previous Collection 5 (C5) version, there are enough changes that there are significant impacts to the products and their interpretation. The C6 aerosol data set will be created from three separate retrieval algorithms that operate over different surface types. These are the two "Dark Target" (DT) algorithms for retrieving (1) over ocean (dark in visible and longer wavelengths) and (2) over vegetated/dark-soiled land (dark in the visible), plus the "Deep Blue" (DB) algorithm developed originally for retrieving (3) over desert/arid land (bright in the visible). Here, we focus on DT-ocean and DT-land (#1 and #2). We have updated assumptions for central wavelengths, Rayleigh optical depths and gas (H2O, O3, CO2, etc.) absorption corrections, while relaxing the solar zenith angle limit (up to ≤ 84°) to increase poleward coverage. For DT-land, we have updated the cloud mask to allow heavy smoke retrievals, fine-tuned the assignments for aerosol type as function of season/location, corrected bugs in the Quality Assurance (QA) logic, and added diagnostic parameters such topographic altitude. For DT-ocean, improvements include a revised cloud mask for thin-cirrus detection, inclusion of wind speed dependence on the surface reflectance, updates to logic of QA Confidence flag (QAC) assignment, and additions of important diagnostic information. At the same time, we quantified how "upstream" changes to instrument calibration, land/sea masking and cloud masking will also impact the statistics of global AOD, and affect Terra and Aqua differently. For Aqua, all changes will result in reduced global AOD (by 0.02) over ocean and increased AOD (by 0.02) over land, along with changes in spatial coverage. We compared preliminary data to surface-based sun photometer data, and show that C6 should improve upon C5. C6 will include a merged DT/DB product over semi-arid land surfaces for reduced-gap coverage and better visualization, and new information about clouds in the aerosol field. Responding to the needs of the air quality community, in addition to the standard 10 km product, C6 will include a global (DT-land and DT-ocean) aerosol product at 3 km resolution.

Download Full-text

Improved cloud mask algorithm for FY-3A/VIRR data over the northwest region of China

Atmospheric Measurement Techniques ◽

10.5194/amt-6-549-2013 ◽

2013 ◽

Vol 6 (3) ◽

pp. 549-563 ◽

Cited By ~ 5

Author(s):

X. Wang ◽

W. Li ◽

Y. Zhu ◽

B. Zhao

Keyword(s):

Confidence Level ◽

Detection Algorithm ◽

Cloud Detection ◽

Data Set ◽

Four Seasons ◽

Moderate Resolution ◽

Moderate Resolution Imaging Spectroradiometer ◽

Land Surfaces ◽

Northwest Region ◽

Cloud Mask

Abstract. The existence of various land surfaces always leads to more difficulties in cloud detection based on satellite observations, especially over bright surfaces such as snow and deserts. To improve the cloud mask result over complex terrain, an unbiased, daytime cloud detection algorithm for the Visible and InfRared Radiometer (VIRR) on board the Chinese FengYun-3A polar-orbiting meteorological satellite is applied over the northwest region of China. The algorithm refers to the concept of the clear confidence level from Moderate Resolution Imaging Spectroradiometer (MODIS) and the unbiased structure of the CLoud and Aerosol Unbiased Decision Intellectual Algorithm (CLAUDIA). Six main channels of VIRR centered at the wavelengths of 0.455, 0.63, 0.865, 1.595, 1.36, and 10.8 μm are designed to estimate the degree of a pixel's cloud contamination judged by the clear confidence level. Based on the statistical data set during four months (January, April, July, and October) in 2010, seasonal thresholds are applied to improve the accuracy of the cloud detection results. Flags depicting snow and water are also generated by the specific threshold tests for special surfaces. As shown in image inspections, the cloud detection results over snow and deserts, adopting the proposed scheme, exhibit better correlations with true-color images than the VIRR official cloud mask results do. The performance of the proposed algorithm has been evaluated in detail for four seasons in 2011, using cloud mask products from MODIS and the ground-based observations. The evaluation is based on, overall, 47 scenes collocated with MODIS and 96 individual matchups between VIRR and the ground-based observations from two weather stations located in the research region. The quantitative validations suggest that the estimations of clear-sky regions have been greatly improved by the proposed algorithm, while a poor identification of the cirrus clouds occurs over deserts.

Download Full-text

Investigating the frequency and interannual variability in global above-cloud aerosol characteristics with CALIOP and OMI

Atmospheric Chemistry and Physics ◽

10.5194/acp-16-47-2016 ◽

2016 ◽

Vol 16 (1) ◽

pp. 47-69 ◽

Cited By ~ 13

Author(s):

R. Alfaro-Contreras ◽

J. Zhang ◽

J. R. Campbell ◽

J. S. Reid

Keyword(s):

Interannual Variability ◽

Orthogonal Polarization ◽

Cloud Detection ◽

Ozone Monitoring Instrument ◽

Data Set ◽

Moderate Resolution ◽

Resolution Imaging ◽

Moderate Resolution Imaging Spectroradiometer ◽

First Time ◽

Aerosol Index

Abstract. Seven and a half years (June 2006 to November 2013) of Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) aerosol and cloud layer products are compared with collocated Ozone Monitoring Instrument (OMI) aerosol index (AI) data and Aqua Moderate Resolution Imaging Spectroradiometer (MODIS) cloud products in order to investigate variability in estimates of biannual and monthly above-cloud aerosol (ACA) events globally. The active- (CALIOP) and passive-based (OMI-MODIS) techniques have their advantages and caveats for ACA detection, and thus both are used to derive a thorough and robust comparison of daytime cloudy-sky ACA distribution and climatology. For the first time, baseline above-cloud aerosol optical depth (ACAOD) and AI thresholds are derived and examined (AI  =  1.0, ACAOD  =  0.015) for each sensor. Both OMI-MODIS and CALIOP-based daytime spatial distributions of ACA events show similar patterns during both study periods (December–May) and (June–November). Divergence exists in some regions, however, such as Southeast Asia during June through November, where daytime cloudy-sky ACA frequencies of up to 10 % are found from CALIOP yet are non-existent from the OMI-based method. Conversely, annual cloudy-sky ACA frequencies of 20–30 % are reported over northern Africa from the OMI-based method yet are largely undetected by the CALIOP-based method. Using a collocated OMI-MODIS-CALIOP data set, our study suggests that the cloudy-sky ACA frequency differences between the OMI-MODIS- and CALIOP-based methods are mostly due to differences in cloud detection capability between MODIS and CALIOP as well as QA flags used. An increasing interannual variability of ∼  0.3–0.4 % per year (since 2009) in global monthly cloudy-sky ACA daytime frequency of occurrence is found using the OMI-MODIS-based method. Yet, CALIOP-based global daytime ACA frequencies exhibit a near-zero interannual variability. Further analysis suggests that the OMI-derived interannual variability in cloudy-sky ACA frequency may be affected by OMI row anomalies in later years. A few regions are found to have increasing slopes in interannual variability in cloudy-sky ACA frequency, including the Middle East and India. Regions with slightly negative slopes of the interannual variability in cloudy-sky ACA frequencies are found over South America and China, while remaining regions in the study show nearly zero change in ACA frequencies over time. The interannual variability in ACA frequency is not, however, statistically significant on both global and regional scales, given the relatively limited sample sizes. A longer data record of ACA events is needed in order to establish significant trends of ACA frequency regionally and globally.

Download Full-text

MODIS 3 km aerosol product: applications over land in an urban/suburban region

Atmospheric Measurement Techniques Discussions ◽

10.5194/amtd-6-1683-2013 ◽

2013 ◽

Vol 6 (1) ◽

pp. 1683-1716 ◽

Cited By ~ 6

Author(s):

L. A. Munchak ◽

R. C. Levy ◽

S. Mattoo ◽

L. A. Remer ◽

B. N. Holben ◽

...

Keyword(s):

Urban Areas ◽

High Spectral Resolution ◽

New Information ◽

Land Cover Data ◽

Moderate Resolution ◽

Resolution Imaging ◽

Moderate Resolution Imaging Spectroradiometer ◽

Langley Research Center ◽

High Spectral Resolution Lidar ◽

Error Envelope

Abstract. MODerate resolution Imaging Spectroradiometer (MODIS) instruments aboard the Terra and Aqua satellites have provided a rich dataset of aerosol information at a 10 km spatial scale. Although originally intended for climate applications, the air quality community quickly became interested in using the MODIS aerosol data. However, 10 km resolution is not sufficient to resolve local scale aerosol features. With this in mind, MODIS Collection 6 is including a global aerosol product with a 3 km resolution. Here, we evaluate the 3 km product over the Baltimore/Washington D.C., USA, corridor during the summer of 2011, by comparing with spatially dense data collected as part of the DISCOVER-AQ campaign; these data were measured by the NASA Langley Research Center airborne High Spectral Resolution Lidar (HSRL) and a network of 44 sun photometers (SP) spaced approximately 10 km apart. The HSRL instrument shows that AOD can vary by up to 0.2 within a single 10 km MODIS pixel, meaning that higher resolution satellite retrievals may help to characterize aerosol spatial distributions in this region. Different techniques for validating a high-resolution aerosol product against SP measurements are considered. Although the 10 km product is more statistically reliable than the 3 km product, the 3 km product still performs acceptably, with more than two-thirds of MODIS/SP collocations falling within the expected error envelope with high correlation (R > 0.90). The 3 km product can better resolve aerosol gradients and retrieve closer to clouds and shorelines than the 10 km product, but tends to show more significant noise especially in urban areas. This urban degradation is quantified using ancillary land cover data. Overall, we show that the MODIS 3 km product adds new information to the existing set of satellite derived aerosol products and validates well over the region, but due to noise and problems in urban areas, should be treated with some degree of caution.

Download Full-text

Test of a Modified Infrared-Only ABI Cloud Mask Algorithm for AHI Radiance Observations

Journal of Applied Meteorology and Climatology ◽

10.1175/jamc-d-16-0254.1 ◽

2016 ◽

Vol 55 (11) ◽

pp. 2529-2546 ◽

Cited By ~ 20

Author(s):

X. Zhuge ◽

X. Zou

Keyword(s):

Near Infrared ◽

Extended System ◽

Clear Sky ◽

Moderate Resolution ◽

Resolution Imaging ◽

Moderate Resolution Imaging Spectroradiometer ◽

Cloud Mask ◽

Very High ◽

Lower False Alarm Rate ◽

Infrared Channel

AbstractAssimilation of infrared channel radiances from geostationary imagers requires an algorithm that can separate cloudy radiances from clear-sky ones. An infrared-only cloud mask (CM) algorithm has been developed using the Advanced Himawari Imager (AHI) radiance observations. It consists of a new CM test for optically thin clouds, two modified Advanced Baseline Imager (ABI) CM tests, and seven other ABI CM tests. These 10 CM tests are used to generate composite CMs for AHI data, which are validated by using the Moderate Resolution Imaging Spectroradiometer (MODIS) CMs. It is shown that the probability of correct typing (PCT) of the new CM algorithm over ocean and over land is 89.73% and 90.30%, respectively and that the corresponding leakage rates (LR) are 6.11% and 4.21%, respectively. The new infrared-only CM algorithm achieves a higher PCT and a lower false-alarm rate (FAR) over ocean than does the Clouds from the Advanced Very High Resolution Radiometer (AVHRR) Extended System (CLAVR-x), which uses not only the infrared channels but also visible and near-infrared channels. A slightly higher FAR of 7.92% and LR of 6.18% occurred over land during daytime. This result requires further investigation.

Download Full-text

Evaluation of the Simard et al. 2011 Global Canopy Height Map in Boreal Forests

Remote Sensing ◽

10.3390/rs12071114 ◽

2020 ◽

Vol 12 (7) ◽

pp. 1114

Author(s):

Wei Yang ◽

Akihiko Kondoh

Keyword(s):

Boreal Forests ◽

Forest Canopy ◽

Spatial Separation ◽

Canopy Height ◽

Tree Cover ◽

Data Sets ◽

Data Set ◽

Moderate Resolution ◽

Resolution Imaging ◽

Moderate Resolution Imaging Spectroradiometer

Light detection and ranging (LiDAR) provides a state-of-the-art technique for measuring forest canopy height. Nevertheless, it may miss some forests due to its spatial separation of individual spots. A number of efforts have been made to overcome the limitation of global LiDAR datasets to generate wall-to-wall canopy height products, among which a global satellite product produced by Simard et al. (2011) (henceforth, the Simard-map) has been the most widely applied. However, the accuracy of the Simard-map is uncertain in boreal forests, which play important roles in the terrestrial carbon cycle and are encountering more extensive climate changes than the global average. In this letter, we evaluated the Simard-map in boreal forests through a literature review of field canopy height. Our comparison shows that the Simard-map yielded a significant correlation with the field canopy height (R2 = 0.68 and p < 0.001). However, remarkable biases were observed with the root mean square error (RMSE), regression slope, and intercept of 6.88 m, 0.448, and 10.429, respectively. Interestingly, we found that the evaluation results showed an identical trend with a validation of moderate-resolution imaging spectroradiometer (MODIS) tree-cover product (MOD44B) in boreal forests, which was used as a crucial input data set for generating the Simard-map. That is, both the Simard-map and MOD44B yielded an overestimation (underestimation) in the lower (upper) tails of the scatterplots between the field and satellite data sets. This indicates that the MOD44B product is the likely source of error for the estimation biases of the Simard-map. Finally, a field calibration was performed to improve the Simard-map in boreal forests by compensating for the estimation biases and discarding non-forest areas, which provided a more reliable canopy height product for future applications.

Download Full-text

Validation and Comparison of MODIS C6.1 and C6 Aerosol Products over Beijing, China

Remote Sensing ◽

10.3390/rs10122021 ◽

2018 ◽

Vol 10 (12) ◽

pp. 2021 ◽

Cited By ~ 17

Author(s):

Xinpeng Tian ◽

Qiang Liu ◽

Xiuhong Li ◽

Jing Wei

Keyword(s):

Optical Properties ◽

Urban Areas ◽

Surface Characteristics ◽

Complex Surface ◽

Deep Blue ◽

Spatial Coverage ◽

Moderate Resolution ◽

Moderate Resolution Imaging Spectroradiometer ◽

Beijing China ◽

Better Than

The operational Moderate Resolution Imaging Spectroradiometer (MODIS) Aerosol Products (APs) have provided long-term and wide-spatial-coverage aerosol optical properties across the globe, such as aerosol optical depth (AOD). However, the performance of the latest Collection 6.1 (C6.1) of MODIS APs is still unclear over urban areas that feature complex surface characteristics and aerosol models. The aim of this study was to validate and compare the performance of the MODIS C6.1 and C6 APs (MxD04, x = O for Terra, x = Y for Aqua) over Beijing, China. The results of the Dark Target (DT) and Deep Blue (DB) algorithms were validated against Aerosol Robotic Network (AERONET) ground-based observations at local sites. The retrieval uncertainties and accuracies were evaluated using the expected error (EE: ±0.05 + 15%) and the root-mean-square error (RMSE). It was found that the MODIS C6.1 DT products performed better than the C6 DT products, with a greater percentage (by about 13%–14%) of the retrievals falling within the EE. However, the DT retrievals collected from two collections were significantly overestimated in the Beijing region, with more than 64% and 48% of the samples falling above the EE for the Terra and Aqua satellites, respectively. The MODIS C6.1 DB products performed similarly to the C6 DB products, with 70%–73% of the retrievals matching within the EE and estimation uncertainties. Moreover, the DB algorithm performed much better than DT algorithm over urban areas, especially in winter where abundant missing pixels were found in DT products. To investigate the effects of factors on AOD retrievals, the variability in the assumed surface reflectance and the main optical properties applied in DT and DB algorithms are also analyzed.

Download Full-text

Snow Albedo Seasonality and Trend from MODIS Sensor and Ground Data at Johnsons Glacier, Livingston Island, Maritime Antarctica

Sensors ◽

10.3390/s19163569 ◽

2019 ◽

Vol 19 (16) ◽

pp. 3569

Author(s):

Calleja ◽

Corbea-Pérez ◽

Fernández ◽

Recondo ◽

Peón ◽

...

Keyword(s):

Moving Average ◽

Data Sets ◽

Snow Albedo ◽

Livingston Island ◽

Moderate Resolution ◽

Resolution Imaging ◽

Moderate Resolution Imaging Spectroradiometer ◽

Sky Conditions ◽

Cloud Mask

The aim of this work is to investigate whether snow albedo seasonality and trend under all sky conditions at Johnsons Glacier (Livingston Island, Antarctica) can be tracked using the Moderate Resolution Imaging Spectroradiometer (MODIS) snow albedo daily product MOD10A1. The time span is from December 2006 to February 2015. As the MOD10A1 snow albedo product has never been used in Antarctica before, we also assess the performance for the MOD10A1 cloud mask. The motivation for this work is the need for a description of snow albedo under all sky conditions (including overcast days) using satellite data with mid-spatial resolution. In-situ albedo was filtered with a 5-day windowed moving average, while the MOD10A1 data were filtered using a maximum filter. Both in-situ and MOD10A1 data follow an exponential decay during the melting season, with a maximum decay of 0.049/0.094 day−1 (in-situ/MOD10A1) for the 2006–2007 season and a minimum of 0.016/0.016 day−1 for the 2009–2010 season. The duration of the decay varies from 85 days (2007–2008) to 167 days (2013–2014). Regarding the albedo trend, both data sets exhibit a slight increase of albedo, which may be explained by an increase of snowfall along with a decrease of snowmelt in the study area. Annual albedo increases of 0.2% and 0.7% are obtained for in-situ and MOD10A1 data, respectively, which amount to respective increases of 2% and 6% in the period 2006–2015. We conclude that MOD10A1 can be used to characterize snow albedo seasonality and trend on Livingston Island when filtered with a maximum filter.

Download Full-text

Derivation of Shortwave Radiometric Adjustments for SNPP and NOAA-20 VIIRS for the NASA MODIS-VIIRS Continuity Cloud Products

Remote Sensing ◽

10.3390/rs12244096 ◽

2020 ◽

Vol 12 (24) ◽

pp. 4096 ◽

Cited By ~ 2

Author(s):

Kerry Meyer ◽

Steven Platnick ◽

Robert Holz ◽

Steve Dutcher ◽

Greg Quinn ◽

...

Keyword(s):

Optical Properties ◽

Infrared Imaging ◽

Trend Detection ◽

Adjustment Factors ◽

Moderate Resolution ◽

Resolution Imaging ◽

Water Cloud ◽

Moderate Resolution Imaging Spectroradiometer ◽

New Generation ◽

Cloud Mask

Climate studies, including trend detection and other time series analyses, necessarily require stable, well-characterized and long-term data records. For satellite-based geophysical retrieval datasets, such data records often involve merging the observational records of multiple similar, though not identical, instruments. The National Aeronautics and Space Administration (NASA) cloud mask (CLDMSK) and cloud-top and optical properties (CLDPROP) products are designed to bridge the observational records of the Moderate-resolution Imaging Spectroradiometer (MODIS) onboard NASA’s Aqua satellite and the Visible Infrared Imaging Radiometer Suite (VIIRS) onboard the joint NASA/National Oceanic and Atmospheric Administration (NOAA) Suomi National Polar-orbiting Partnership (SNPP) satellite and NOAA’s new generation of operational polar-orbiting weather platforms (NOAA-20+). Early implementations of the CLDPROP algorithms on Aqua MODIS and SNPP VIIRS suffered from large intersensor biases in cloud optical properties that were traced back to relative radiometric inconsistency in analogous shortwave channels on both imagers, with VIIRS generally observing brighter top-of-atmosphere spectral reflectance than MODIS (e.g., up to 5% brighter in the 0.67 µm channel). Radiometric adjustment factors for the SNPP and NOAA-20 VIIRS shortwave channels used in the cloud optical property retrievals are derived from an extensive analysis of the overlapping observational records with Aqua MODIS, specifically for homogenous maritime liquid water cloud scenes for which the viewing/solar geometry of MODIS and VIIRS match. Application of these adjustment factors to the VIIRS L1B prior to ingestion into the CLDMSK and CLDPROP algorithms yields improved intersensor agreement, particularly for cloud optical properties.

Download Full-text

A Geometry-Based Approach to Identifying Cloud Shadows in the VIIRS Cloud Mask Algorithm for NPOESS

Journal of Atmospheric and Oceanic Technology ◽

10.1175/2009jtecha1198.1 ◽

2009 ◽

Vol 26 (7) ◽

pp. 1388-1397 ◽

Cited By ~ 20

Author(s):

Keith D. Hutchison ◽

Robert L. Mahoney ◽

Eric F. Vermote ◽

Thomas J. Kopp ◽

John M. Jackson ◽

...

Keyword(s):

Satellite System ◽

Spectral Signatures ◽

Infrared Imager ◽

Moderate Resolution ◽

Resolution Imaging ◽

Moderate Resolution Imaging Spectroradiometer ◽

Cloud Mask ◽

New Procedures ◽

Global Datasets ◽

Operational Time

Abstract A geometry-based approach is presented to identify cloud shadows using an automated cloud classification algorithm developed for the National Polar-orbiting Operational Environmental Satellite System (NPOESS) program. These new procedures exploit both the cloud confidence and cloud phase intermediate products generated by the Visible/Infrared Imager/Radiometer Suite (VIIRS) cloud mask (VCM) algorithm. The procedures have been tested and found to accurately detect cloud shadows in global datasets collected by NASA’s Moderate Resolution Imaging Spectroradiometer (MODIS) sensor and are applied over both land and ocean background conditions. These new procedures represent a marked departure from those used in the heritage MODIS cloud mask algorithm, which utilizes spectral signatures in an attempt to identify cloud shadows. However, they more closely follow those developed to identify cloud shadows in the MODIS Surface Reflectance (MOD09) data product. Significant differences were necessary in the implementation of the MOD09 procedures to meet NPOESS latency requirements in the VCM algorithm. In this paper, the geometry-based approach used to predict cloud shadows is presented, differences are highlighted between the heritage MOD09 algorithm and new VIIRS cloud shadow algorithm, and results are shown for both these algorithms plus cloud shadows generated by the spectral-based approach. The comparisons show that the geometry-based procedures produce cloud shadows far superior to those predicted with the spectral procedures. In addition, the new VCM procedures predict cloud shadows that agree well with those found in the MOD09 product while significantly reducing the execution time as required to meet the operational time constraints of the NPOESS system.

Download Full-text

The Continuity MODIS-VIIRS Cloud Mask

Remote Sensing ◽

10.3390/rs12203334 ◽

2020 ◽

Vol 12 (20) ◽

pp. 3334 ◽

Cited By ~ 3

Author(s):

Richard A. Frey ◽

Steven A. Ackerman ◽

Robert E. Holz ◽

Steven Dutcher ◽

Zach Griffith

Keyword(s):

Infrared Imaging ◽

Cloud Fraction ◽

The Arctic ◽

Orthogonal Polarization ◽

Cloud Detection ◽

Moderate Resolution ◽

Resolution Imaging ◽

Hit Rates ◽

Moderate Resolution Imaging Spectroradiometer ◽

Cloud Mask

This paper introduces the Continuity Moderate Resolution Imaging Spectroradiometer (MODIS)-Visible Infrared Imaging Radiometer Suite (VIIRS) Cloud Mask (MVCM), a cloud detection algorithm designed to facilitate continuity in cloud detection between the MODIS (Moderate Resolution Imaging Spectroradiometer) on the Aqua and Terra platforms and the series of VIIRS (Visible Infrared Imaging Radiometer Suite) instruments, beginning with the Soumi National Polar-orbiting Partnership (SNPP) spacecraft. It is based on the MODIS cloud mask that has been operating since 2000 with the launch of the Terra spacecraft (MOD35) and continuing in 2002 with Aqua (MYD35). The MVCM makes use of fourteen spectral bands that are common to both MODIS and VIIRS so as to create consistent cloud detection between the two instruments and across the years 2000–2020 and beyond. Through comparison data sets, including collocated Aqua MODIS and Cloud-Aerosol LIdar with Orthogonal Polarization (CALIOP) from the A-Train, this study was designed to assign statistical consistency benchmarks between the MYD35 and MVCM cloud masks. It is shown that the MVCM produces consistent cloud detection results between Aqua MODIS, SNPP VIIRS, and NOAA-20 VIIRS and that the quality is comparable to the standard Aqua MODIS cloud mask. Globally, comparisons with collocated CALIOP lidar show combined clear and cloudy sky hit rates of 88.2%, 87.5%, 86.8%, and 86.8% for MYD35, MVCM Aqua MODIS, MVCM SNPP VIIRS, and MVCM NOAA-20 VIIRS, respectively, for June through until August, 2018. For the same months and in the same order for 60S–60N, hit rates are 90.7%, 90.5%, 90.1%, and 90.3%. From the time series constructed from gridded daily means of 60S–60N cloud fractions, we found that the mean day-to-day cloud fraction differences/standard deviations in percent to be 0.68/0.55, 0.94/0.64, −0.20/0.50, and 0.44/0.82 for MVCM Aqua MODIS-MVCM SNPP VIIRS day and night, and MVCM NOAA-20 VIIRS-MVCM SNPP VIIRS day and night, respectively. It is seen that the MODIS and VIIRS 1.38 µm cirrus detection bands perform similarly but with MODIS detecting slightly more clouds in the middle to high levels of the troposphere and the VIIRS detecting more in the upper troposphere above 16 km. In the Arctic, MVCM Aqua MODIS and SNPP VIIRS reported cloud fraction differences of 0–3% during the mid-summer season and −3–4% during the mid-winter.

Download Full-text