Using remote sensing evapotranspiration solely calibrating hydrology model for predicting runoff time series in ungauged regions

2020 ◽  
Author(s):  
Yongqiang Zhang
Keyword(s):  
Remote Sensing ◽  
Land Surface ◽  
Hydrological Model ◽  
International Association ◽  
Remote Sensing Data ◽  
Water Source ◽  
Annual Runoff ◽  
Runoff Prediction ◽  
Predictions In Ungauged Basins ◽  
Parameter Values

<p>It is important yet challenging to predict runoff in data sparse regions or ungauged regions, majority of which belong to headwater catchments that are normally the major water source for middle and lower river reaches. There are numerous studies carried out since the launch of the Predictions in Ungauged Basins (PUB) initiative by the International Association of Hydrological Sciences (IAHS) in 2003. Most runoff prediction studies rely on modelling approaches via two steps. The first step is to calibrate the hydrological model against observed streamflow at the gauged catchments. The second step is regionalization in which the set of calibrated parameter values from a suitable donor catchment is used for predicting runoff in a targeted ungauged catchment. The major challenge of this approach is that when the gauged catchments are sparsely distributed or little available, it is hard to get sensible regionalization results. This study develops a new approach to calibrate a hydrological model purely against remote sensed actual evapotranspiration data obtained from 8-day and 500 m resolution PML-V2 products and the calibrated parameters can be directly used for runoff prediction across global land surface. This approach has been successfully used for predicting daily, monthly and annual runoff in Australia and southeastern Tibetan Plateau. This is an exciting research domain for hydrologists to pursue since remote sensing data is accumulated in a fast-increasing rate, and will provide researchers an unprecedent opportunity.</p>

scholarly journals Uncertainty reduction and parameters estimation of a~distributed hydrological model with ground and remote sensing data

2014 ◽  
Vol 11 (6) ◽  
pp. 6215-6271
Author(s):  
F. Silvestro ◽  
S. Gabellani ◽  
R. Rudari ◽  
F. Delogu ◽  
P. Laiolo ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Land Surface ◽  
Hydrological Model ◽  
Hydrological Cycle ◽  
Remote Sensing Data ◽  
Hydrologic Model ◽  
Parameters Estimation ◽  
State Variables ◽  
Test Bed ◽  
Sensing Data

Abstract. During the last decade the opportunity and usefulness of using remote sensing data in hydrology, hydrometeorology and geomorphology has become even more evident and clear. Satellite based products often provide the advantage of observing hydrologic variables in a distributed way while offering a different view that can help to understand and model the hydrological cycle. Moreover, remote sensing data are fundamental in scarce data environments. The use of satellite derived DTM, which are globally available (e.g. from SRTM as used in this work), have become standard practice in hydrologic model implementation, but other types of satellite derived data are still underutilized. In this work, Meteosat Second Generation Land Surface Temperature (LST) estimates and Surface Soil Moisture (SSM) available from EUMETSAT H-SAF are used to calibrate the Continuum hydrological model that computes such state variables in a prognostic mode. This work aims at proving that satellite observations dramatically reduce uncertainties in parameters calibration by reducing their equifinality. Two parameter estimation strategies are implemented and tested: a multi-objective approach that includes ground observations and one solely based on remotely sensed data. Two Italian catchments are used as the test bed to verify the model capability in reproducing long-term (multi-year) simulations.

scholarly journals Spatial pattern evaluation of a calibrated national hydrological model – a remote sensing based diagnostic approach

2017 ◽  
Author(s):  
Gorka Mendiguren ◽  
Julian Koch ◽  
Simon Stisen
Keyword(s):  
Remote Sensing ◽  
Spatial Pattern ◽  
Spatial Patterns ◽  
Hydrological Model ◽  
Remote Sensing Data ◽  
Driving Mechanism ◽  
Distributed Hydrological Model ◽  
Eof Analysis ◽  
Sensing Data ◽  
Spatio Temporal

Abstract. Distributed hydrological models are traditionally evaluated against discharge stations, emphasizing the temporal and neglecting the spatial component of a model. The present study widens the traditional paradigm by highlighting spatial patterns of evapotranspiration (ET), a key variable at the land-atmosphere interface, obtained from two different approaches at the national scale of Denmark. The first approach is based on a national water resources model (DK-model), using the MIKE-SHE model code, and the second approach utilizes a two source energy balance model (TSEB) driven mainly by satellite remote sensing data. The main hypothesis of the study is that while both approaches are essentially estimates, the spatial patterns of the remote sensing based approach are explicitly driven by observed land surface temperature and therefore represent the most direct spatial pattern information of ET; enabling its use for distributed hydrological model evaluation. Ideally the hydrological model simulation and remote sensing based approach should present similar spatial patterns and driving mechanism of ET. However, the spatial comparison showed that the differences are significant and indicating insufficient spatial pattern performance of the hydrological model. The differences in spatial patterns can partly be explained by the fact that the hydrological model is configured to run in 6 domains that are calibrated independently from each other, as it is often the case for large scale multi-basin calibrations. Furthermore, the model incorporates predefined temporal dynamics of Leaf Area Index (LAI), root depth (RD) and Crop coefficient (Kc) for each land cover type. This zonal approach of model parametrization ignores the spatio-temporal complexity of the natural system. To overcome this limitation, the study features a modified version of the DK-Model in which LAI, RD, and KC are empirically derived using remote sensing data and detailed soil property maps in order to generate a higher degree of spatio-temporal variability and spatial consistency between the 6 domains. The effects of these changes are analyzed by using the empirical orthogonal functions (EOF) analysis to evaluate spatial patterns. The EOF-analysis shows that including remote sensing derived LAI, RD and KC in the distributed hydrological model adds spatial features found in the spatial pattern of remote sensing based ET.

Study on the Application and Comparative Analysis of Land Surface Temperature Retrieval Method Based on Multi-Sensor Remote Sensing Data

2014 ◽  
Vol 1010-1012 ◽  
pp. 1276-1279 ◽  
Author(s):  
Yin Tai Na
Keyword(s):  
Remote Sensing ◽  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Remote Sensing Data ◽  
Sensing Data ◽  
Advantages And Disadvantages ◽  
Urban Heat ◽  
Split Window Algorithm ◽  
Temperature Retrieval

The three commonly used remote sensing land surface temperature retrieval methods are described, namely single-window algorithm, split window algorithm and multi-channel algorithm, which have their advantages and disadvantages. The land surface temperature (LST) of study area was retrieved with multi-source remote sensing data. LST of study area was retrieved with the split window algorithm on January 10, 2003 and November 19, 2003 which is comparatively analyzed with the LST result of ETM+data with the single-window algorithm and the LST result of ASTER data with multi channel algorithm in the same period. The results show that land surface temperature of different land features are significantly different, where the surface temperature of urban land is the highest, and that of rivers and lakes is the lowest, followed by woodland. It is concluded that the expansion of urban green space and protection of urban water can prevent or diminish the urban heat island.

MONITORING THERMAL POLLUTION SOURCES IN VORONEZH (RUSSIA) USING REMOTE SENSING DATA

2021 ◽  
pp. 54-65
Author(s):  
Дмитрий Владимирович Сарычев ◽  
Ирина Владимировна Попова ◽  
Семен Александрович Куролап
Keyword(s):  
Remote Sensing ◽  
Land Surface ◽  
Remote Sensing Data ◽  
Urban Heat Islands ◽  
Landsat 8 ◽  
Heat Islands ◽  
Land Surface Temperatures ◽  
Treatment Facilities ◽  
Urban Heat ◽  
Industrial Zones

Рассмотрены вопросы мониторинга теплового загрязнения окружающей среды в городах. Представлена методика отбора спектрозональных спутниковых снимков, их обработки и интерпретации полученных результатов. Для оценки городского острова тепла были использованы снимки с космического аппарата Landsat 8 TIRS. На их основе построены карты пространственной структуры острова тепла города Воронежа за летний и зимний периоды. Определены тепловые аномалии и выявлено 11 основных техногенных источников теплового загрязнения в г. Воронеже, установлена их принадлежность к промышленным зонам предприятий, а также к очистным гидротехническим сооружениям. Поверхностные температуры данных источников в среднем были выше фоновых температур приблизительно на 6° зимой и на 15,5° С летом. Синхронно со спутниковой съемкой были проведены наземные контрольные тепловизионные измерения температур основных подстилающих поверхностей в г. Воронеже. Полученные данные показали высокую сходимость космических и наземных измерений, на основании чего сделан вывод о надежности используемых данных дистанционного зондирования Земли в мониторинговых наблюдениях теплового загрязнения городской среды. Результаты работ могут найти применение в городском планировании и медицинской экологии. The study deals with the remote sensing and monitoring of urban heat islands. We present a methodology of multispectral satellite imagery selection and processing. The study bases on the freely available Landsat 8 TIRS data. We used multitemporal thermal band combinations to make maps of the urban heat island of Voronezh (Russia) during summer and winter periods. That let us identify 11 artificial sources of heat in Voronezh. All of them turned out to be allocated within industrial zones of plants and water treatment facilities. Land surface temperatures (LST) of these sources were approximately 6° and 15.5° C above the background temperatures in winter and summer, respectively. To prove the remotely sensed temperatures we conducted ground control measurements of LST of different surface types at the satellite revisit moments. Our results showed a significant correlation between the satellite and ground-based measurements, so the maps we produced in this study should be robust. They are of use in urban planning and medical ecology studies.

scholarly journals Utilization of Multi-Temporal Microwave Remote Sensing Data within a Geostatistical Regionalization Approach for the Derivation of Soil Texture

2020 ◽  
Vol 12 (16) ◽  
pp. 2660
Author(s):  
Philip Marzahn ◽  
Swen Meyer
Keyword(s):  
Remote Sensing ◽  
Soil Texture ◽  
Land Surface ◽  
Temporal Frequency ◽  
Management Strategies ◽  
Remote Sensing Data ◽  
Microwave Remote Sensing ◽  
Test Site ◽  
Soil Parameters ◽  
Sensing Data

Land Surface Models (LSM) have become indispensable tools to quantify water and nutrient fluxes in support of land management strategies or the prediction of climate change impacts. However, the utilization of LSM requires soil and vegetation parameters, which are seldom available in high spatial distribution or in an appropriate temporal frequency. As shown in recent studies, the quality of these model input parameters, especially the spatial heterogeneity and temporal variability of soil parameters, has a strong effect on LSM simulations. This paper assesses the potential of microwave remote sensing data for retrieving soil physical properties such as soil texture. Microwave remote sensing is able to penetrate in an imaged media (soil, vegetation), thus being capable of retrieving information beneath such a surface. In this study, airborne remote sensing data acquired at 1.3 GHz and in different polarization is utilized in conjunction with geostatistics to retrieve information about soil texture. The developed approach is validated with in-situ data from different field campaigns carried out over the TERENO test-site “North-Eastern German Lowland Observatorium”. With the proposed approach a high accuracy of the retrieved soil texture with a mean RMSE of 2.42 (Mass-%) could be achieved outperforming classical deterministic and geostatistical approaches.

Sign in / Sign up

Export Citation Format

Share Document