What balloon soundings can tell about surface heat flux partitioning

2020 ◽  
Author(s):  
Jasper Denissen ◽  
Hendrik Wouters ◽  
René Orth ◽  
Diego Miralles ◽  
Ryan Teuling
Keyword(s):  
Heat Flux ◽  
Soil Moisture ◽  
Land Surface ◽  
Surface Heat Flux ◽  
Sensible Heat Flux ◽  
Surface Heat ◽  
Atmospheric Measurements ◽  
Flux Partitioning ◽  
Temperature And Humidity ◽  
Soil Moisture Availability

<p>The land surface can influence near-surface weather. This happens, amongst others, through the impact of soil moisture availability on surface heat fluxes: when soil moisture is unavailable in soil moisture-limited conditions, most of the available energy will be used for heating the air above the land surface (sensible heat flux). But as soil moisture increases, evapotranspiration (latent heat flux) increases, affecting the surface heat flux partitioning. At the point that ample soil moisture is available in energy-limited conditions, the surface heat flux partitioning remains unaffected by soil moisture. The atmospheric boundary layer (ABL) responds to changes in surface heat flux partitioning in particular in terms of its temperature and humidity. Based on these mechanisms, observations of boundary layer dynamics should allow to infer the large-scale land surface state.</p><p>The goal of this study is to use atmospheric measurements of temperature and humidity to estimate the surface heat flux partitioning. This is achieved by constraining an ABL model (CLASS4GL) with the vertical temperature and humidity profiles as observed by thousands of soundings of hot air balloons across the globe. In CLASS4GL, the initial soil moisture is adjusted to yield matching modelled versus observed vertical temperature and humidity profiles. By doing so, the resulting surface fluxes are inferred exclusively from atmospheric measurements.</p><p>We find that ABL’s tend to higher, warmer and drier in water-limited conditions. This largely results from changes in soil moisture availability, which mainly affects the sensible heat flux and consequently, the surface heat flux partitioning. We determine the critical soil moisture, which distinguishes between soil moisture- and energy- limited conditions, using the ratio between the sensible- and latent heat flux and independent satellite surface soil moisture.</p><p>This is the first time that balloon soundings are used globally to assess the critical soil moisture. This research will help to further improve our understanding of land-atmosphere feedbacks and foster a correct representation of land surface characteristics in Land Models and subsequently, Climate Models.</p>

scholarly journals Improving Soil Moisture and Surface Turbulent Heat Flux Estimates by Assimilation of SMAP Brightness Temperatures or Soil Moisture Retrievals and GOES Land Surface Temperature Retrievals

2020 ◽  
Vol 21 (2) ◽  
pp. 183-203 ◽  
Author(s):  
Yang Lu ◽  
Susan C. Steele-Dunne ◽  
Gabriëlle J. M. De Lannoy
Keyword(s):  
Heat Flux ◽  
Soil Moisture ◽  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Surface Heat Flux ◽  
Surface Heat ◽  
Heat Fluxes ◽  
Transfer Model ◽  
Turbulent Heat

AbstractSurface heat fluxes are vital to hydrological and environmental studies, but mapping them accurately over a large area remains a problem. In this study, brightness temperature (TB) observations or soil moisture retrievals from the NASA Soil Moisture Active Passive (SMAP) mission and land surface temperature (LST) product from the Geostationary Operational Environmental Satellite (GOES) are assimilated together into a coupled water and heat transfer model to improve surface heat flux estimates. A particle filter is used to assimilate SMAP data, while a particle smoothing method is adopted to assimilate GOES LST time series, correcting for both systematic biases via parameter updating and for short-term error via state updating. One experiment assimilates SMAP TB at horizontal polarization and GOES LST, a second experiment assimilates SMAP TB at vertical polarization and GOES LST, and a third experiment assimilates SMAP soil moisture retrievals along with GOES LST. The aim is to examine if the assimilation of physically consistent TB and LST observations could yield improved surface heat flux estimates. It is demonstrated that all three assimilation experiments improved flux estimates compared to a no-assimilation case. Assimilating TB data tends to produce smaller bias in soil moisture estimates compared to assimilating soil moisture retrievals, but the estimates are influenced by the respective bias correction approaches. Despite the differences in soil moisture estimates, the flux estimates from different assimilation experiments are in general very similar.

scholarly journals What Determines the Distribution of Shallow Convective Mass Flux through a Cloud Base?

2017 ◽  
Vol 74 (8) ◽  
pp. 2615-2632 ◽  
Author(s):  
Mirjana Sakradzija ◽  
Cathy Hohenegger
Keyword(s):  
Heat Flux ◽  
Convective Heat ◽  
Mass Flux ◽  
Surface Heat Flux ◽  
Sensible Heat Flux ◽  
Surface Heat ◽  
Cloud Base ◽  
Thermodynamic Efficiency ◽  
Tropical Ocean ◽  
Heat Cycle

Abstract The distribution of cloud-base mass flux is studied using large-eddy simulations (LESs) of two reference cases: one representing conditions over the tropical ocean and another one representing midlatitude conditions over land. To examine what sets the difference between the two distributions, nine additional LES cases are set up as variations of the two reference cases. It is found that the total surface heat flux and its changes over the diurnal cycle do not influence the distribution shape. The latter is also not determined by the level of organization in the cloud field. It is instead determined by the ratio of the surface sensible heat flux to the latent heat flux, that is, the Bowen ratio B. This ratio sets the thermodynamic efficiency of the moist convective heat cycle, which determines the portion of the total surface heat flux that can be transformed into mechanical work of convection against mechanical dissipation. The thermodynamic moist heat cycle sets the average mass flux per cloud 〈m〉, and through 〈m〉 it also controls the shape of the distribution. An expression for 〈m〉 is derived based on the moist convective heat cycle and is evaluated against LES. This expression can be used in shallow cumulus parameterizations as a physical constraint on the mass flux distribution. The similarity between the mass flux and the cloud area distributions indicates that B also has a role in shaping the cloud area distribution, which could explain its different shapes and slopes observed in previous studies.

The progress on the observation and modeling of surface heat fluxes and evapotranspiration over heterogeneous landscapes of the Third Pole region

2020 ◽  
Author(s):  
Yaoming Ma
Keyword(s):  
Heat Flux ◽  
Latent Heat Flux ◽  
Land Surface ◽  
Sensible Heat Flux ◽  
Surface Heat ◽  
Heat Fluxes ◽  
Sensible Heat ◽  
Surface Heat Fluxes ◽  
The Third ◽  
Land Surface Heat Fluxes

<p>The exchange of heat and water vapor between land surface and atmosphere over the Third Pole region (Tibetan Plateau and nearby surrounding region) plays an important role in Asian monsoon, westerlies and the northern hemisphere weather and climate systems. Supported by various agencies in the People’s Republic of China, a Third Pole Environment (TPE) observation and research Platform (TPEORP) is now implementing over the Third Pole region. The background of the establishment of the TPEORP, the establishing and monitoring plan of long-term scale (5-10 years) of it will be shown firstly. Then the preliminary observational analysis results, such as the characteristics of land surface energy fluxes partitioning and the turbulent characteristics will also been shown in this study. Then, the parameterization methodology based on satellite data and the atmospheric boundary layer (ABL) observations has been proposed and tested for deriving regional distribution of net radiation flux, soil heat flux, sensible heat flux and latent heat flux (evapotranspiration (ET)) and their variation trends over the heterogeneous landscape of the Tibetan Plateau (TP) area. To validate the proposed methodology, the ground measured net radiation flux, soil heat flux, sensible heat flux and latent heat flux of the TPEORP are compared to the derived values. The results showed that the derived land surface heat fluxes over the study areas are in good accordance with the land surface status. These parameters show a wide range due to the strong contrast of surface feature. And the estimated land surface heat fluxes are in good agreement with ground measurements, and all the absolute percent difference in less than 10% in the validation sites. The sensible heat flux has increased slightly and the latent heat flux has decreased from 2001 to 2016 over the TP. It is therefore conclude that the proposed methodology is successful for the retrieval of land surface heat fluxes and ET over heterogeneous landscape of the TP area. Further improvement of the methodology and its applying field over the whole Third Pole region and Pan-Third Pole region were also discussed.</p>

scholarly journals Estimating surface fluxes over middle and upper streams of the Heihe River Basin with ASTER imagery

2009 ◽  
Vol 6 (3) ◽  
pp. 4619-4635 ◽  
Author(s):  
W. Ma ◽  
Y. Ma ◽  
Z. Hu ◽  
B. Su ◽  
J. Wang ◽  
...  
Keyword(s):  
Heat Flux ◽  
Land Surface ◽  
Sensible Heat Flux ◽  
Surface Heat ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
Heihe River ◽  
Surface Heat Fluxes ◽  
Aster Data ◽  
Land Surface Heat Fluxes

Abstract. Surface fluxes are important boundary conditions for climatological modeling and the Asian monsoon system. Recent availability of high-resolution, multi-band imagery from the ASTER (Advanced Space-borne Thermal Emission and Reflection Radiometer) sensor has enabled us to estimate surface fluxes to bridge the gap between local scale flux measurements using micrometeorological instruments and regional scale land-atmosphere exchanges of water and heat fluxes that are fundamental for the understanding of the water cycle in the Asian monsoon system. A Surface Energy Balance System (SEBS) method based on ASTER data and field observations has been proposed and tested for deriving net radiation flux (Rn), soil heat flux (G0), sensible heat flux (H) and latent heat flux (λ E) over heterogeneous land surface in this paper. As a case study, the methodology was applied to the experimental area of the WATER (Watershed Allied Telemetry Experimental Research), located at the mid-to-upstream sections of the Heihe River, northwest China. The ASTER data of 3 May and 4 June in 2008 was used in this paper for the case of mid-to-upstream sections of the Heihe River Basin. To validate the proposed methodology, the ground-measured land surface heat fluxes (net radiation flux (Rn), soil heat flux (G0), sensible heat flux (H) and latent heat flux (λ E)) were compared to the ASTER derived values. The results show that the derived surface variables and land surface heat fluxes in different months over the study area are in good accordance with the land surface status. It is therefore concluded that the proposed methodology is successful for the retrieval of land surface heat fluxes using the ASTER data and filed observation over the study area.

scholarly journals Estimation of Land Surface Heat Fluxes Based on Landsat 7 ETM+ Data and Field Measurements over the Northern Tibetan Plateau

2019 ◽  
Vol 11 (24) ◽  
pp. 2899
Author(s):  
Nan Ge ◽  
Lei Zhong ◽  
Yaoming Ma ◽  
Meilin Cheng ◽  
Xian Wang ◽  
...  
Keyword(s):  
Heat Flux ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
Land Surface ◽  
Sensible Heat Flux ◽  
Surface Heat ◽  
Heat Fluxes ◽  
Sensible Heat ◽  
Surface Heat Fluxes ◽  
Land Surface Heat Fluxes

Land surface heat fluxes consist of the net radiation flux, soil heat flux, sensible heat flux, and latent heat flux. The estimation of these fluxes is essential to the study of energy transfer in land–atmosphere systems. In this paper, Landsat 7 ETM+ SLC-on data were applied to estimate the land surface heat fluxes on the northern Tibetan Plateau using the SEBS (surface energy balance system) model, in combination with the calculation of field measurements at CAMP/Tibet (Coordinated Enhanced Observing Period (CEOP) Asia–Australia Monsoon Project on the Tibetan Plateau) automatic weather stations based on the combinatory method (CM) for comparison. The root mean square errors between the satellite estimations and the CM calculations for the net radiation flux, soil heat flux, sensible heat flux, and latent heat flux were 49.2 W/m2, 46.3 W/m2, 68.2 W/m2, and 54.9 W/m2, respectively. The results reveal that land surface heat fluxes all present significant seasonal variability. Apart from the sensible heat flux, the satellite-estimated net radiation flux, soil heat flux, and latent heat flux exhibited a trend of summer > spring > autumn > winter. In summer, spring, autumn, and winter, respectively, the median values of the net radiation flux (631.8 W/m2, 583.0 W/m2, 404.4 W/m2, 314.3 W/m2), soil heat flux (40.9 W/m2, 37.9 W/m2, 26.1 W/m2, 20.5 W/m2), sensible heat flux (252.7 W/m2, 219.5 W/m2, 221.4 W/m2, 204.8 W/m2), and latent heat flux (320.1 W/m2, 298.3 W/m2, 142.3 W/m2, 75.5 W/m2) exhibited distinct seasonal diversity. From November to April, the in situ sensible heat flux is higher than the latent heat flux; the opposite is true between June and September, leaving May and October as transitional months. For water bodies, alpine meadows and other main underlying surface types, sensible and latent heat flux generally present contrasting and complementary spatial distributions. Due to the 15–60 m resolution of the Landsat 7 ETM+ data, the distribution of land surface heat fluxes can be used as an indicator of complex underlying surface types over the northern Tibetan Plateau.

scholarly journals Impact of Soil Moisture Data Resolution on Soil Moisture and Surface Heat Flux Estimates through Data Assimilation: A Case Study in the Southern Great Plains

2019 ◽  
Vol 20 (4) ◽  
pp. 715-730 ◽  
Author(s):  
Yang Lu ◽  
Jianzhi Dong ◽  
Susan C. Steele-Dunne
Keyword(s):  
Heat Flux ◽  
Soil Moisture ◽  
Spatial Resolution ◽  
Surface Heat Flux ◽  
Root Zone ◽  
Sampling Frequency ◽  
Surface Heat ◽  
Heat Fluxes ◽  
Soil Moisture Data ◽  
Temporal Sampling

Abstract The spatial heterogeneity and temporal variation of soil moisture and surface heat fluxes are key to many geophysical and environmental studies. It has been demonstrated that they can be mapped by assimilating soil thermal and wetness information into surface energy balance models. The aim of this work is to determine whether enhancing the spatial resolution or temporal sampling frequency of soil moisture data could improve soil moisture or surface heat flux estimates. Two experiments are conducted in an area mainly covered by grassland, and land surface temperature (LST) observations from the Geostationary Operational Environmental Satellite (GOES) mission are assimilated together with either an enhanced L-band passive soil moisture product (9 km, 2–3 days) from the Soil Moisture Active Passive (SMAP) mission or a merged product (36 km, quasi-daily) from the SMAP and the Soil Moisture Ocean Salinity (SMOS) mission. The results suggest that the availability of soil moisture observations is increased by 41% after merging data from the SMAP and the SMOS missions. A comparison with results from a previous study that assimilated a coarser SMAP soil moisture product (36 km, 2–3 days) suggests that enhancing the temporal sampling frequency of soil moisture observations leads to improved soil moisture estimates at both the surface and root zone, and the largest improvement is seen in the bias metric (0.008 and 0.007 m3 m−3 on average at the surface and root zone, respectively). Enhancing the spatial resolution, however, does not significantly improve soil moisture estimates, particularly at the surface. Surface heat flux estimates from assimilating soil moisture data of different spatial or temporal resolutions are very similar.

scholarly journals Estimating surface fluxes over the north Tibetan Plateau area with ASTER imagery

2009 ◽  
Vol 13 (1) ◽  
pp. 57-67 ◽  
Author(s):  
Weiqiang Ma ◽  
Yaoming Ma ◽  
Maoshan Li ◽  
Zeyong Hu ◽  
Lei Zhong ◽  
...  
Keyword(s):  
Heat Flux ◽  
Tibetan Plateau ◽  
Land Surface ◽  
Sensible Heat Flux ◽  
Surface Heat ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
Surface Heat Fluxes ◽  
Aster Data ◽  
Land Surface Heat Fluxes

Abstract. Surface fluxes are important boundary conditions for climatological modeling and Asian monsoon system. The recent availability of high-resolution, multi-band imagery from the ASTER (Advanced Space-borne Thermal Emission and Reflection radiometer) sensor has enabled us to estimate surface fluxes to bridge the gap between local scale flux measurements using micrometeorological instruments and regional scale land-atmosphere exchanges of water and heat fluxes that are fundamental for the understanding of the water cycle in the Asian monsoon system. A parameterization method based on ASTER data and field observations has been proposed and tested for deriving surface albedo, surface temperature, Normalized Difference Vegetation Index (NDVI), Modified Soil Adjusted Vegetation Index (MSAVI), vegetation coverage, Leaf Area Index (LAI), net radiation flux, soil heat flux, sensible heat flux and latent heat flux over heterogeneous land surface in this paper. As a case study, the methodology was applied to the experimental area of the Coordinated Enhanced Observing Period (CEOP) Asia-Australia Monsoon Project (CAMP) on the Tibetan Plateau (CAMP/Tibet), located at the north Tibetan Plateau. The ASTER data of 24 July 2001, 29 November 2001 and 12 March 2002 was used in this paper for the case of summer, winter and spring. To validate the proposed methodology, the ground-measured surface variables (surface albedo and surface temperature) and land surface heat fluxes (net radiation flux, soil heat flux, sensible heat flux and latent heat flux) were compared to the ASTER derived values. The results show that the derived surface variables and land surface heat fluxes in three different months over the study area are in good accordance with the land surface status. Also, the estimated land surface variables and land surface heat fluxes are in good accordance with ground measurements, and all their absolute percentage difference (APD) is less than 10% in the validation sites. It is therefore concluded that the proposed methodology is successful for the retrieval of land surface variables and land surface heat fluxes using the ASTER data and filed observation over the study area.

scholarly journals Estimating surface fluxes over the north Tibetan Plateau area with ASTER imagery

2008 ◽  
Vol 5 (4) ◽  
pp. 1705-1730 ◽  
Author(s):  
W. Ma ◽  
Y. Ma ◽  
M. Li ◽  
Z. Hu ◽  
L. Zhong ◽  
...  
Keyword(s):  
Heat Flux ◽  
Tibetan Plateau ◽  
Land Surface ◽  
Sensible Heat Flux ◽  
Surface Heat ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
Surface Heat Fluxes ◽  
Aster Data ◽  
Land Surface Heat Fluxes

Abstract. Surface fluxes are important boundary conditions for climatological modeling and Asian monsoon system. The recent availability of high-resolution, multi-band imagery from the ASTER (Advanced Space-borne Thermal Emission and Reflection radiometer) sensor has enabled us to estimate surface fluxes. ASTER covers a wide spectral region with 14 bands from the visible to the thermal infrared with high spatial, spectral and radiometric resolution. The spatial resolution varies with wavelength: 15 m in the visible and near-infrared (VNIR), 30 m in the short wave infrared (SWIR), and 90 m in the thermal infrared (TIR). A parameterization method based on ASTER data and field observations has been proposed and tested for deriving surface albedo, surface temperature, Normalized Difference Vegetation Index (NDVI), Modified Soil Adjusted Vegetation Index (MSAVI), vegetation coverage, Leaf Area Index (LAI), net radiation flux, soil heat flux, sensible heat flux and latent heat flux over heterogeneous land surface in this paper. As a case study, the methodology was applied to the experimental area of the Coordinated Enhanced Observing Period (CEOP) Asia-Australia Monsoon Project (CAMP) on the Tibetan Plateau (CAMP/Tibet), which located at the north Tibetan Plateau. The ASTER data of 24 July 2001, 29 November 2001 and 12 March 2002 was used in this paper for the case of summer, winter and spring. To validate the proposed methodology, the ground-measured surface variables (surface albedo and surface temperature) and land surface heat fluxes (net radiation flux, soil heat flux, sensible heat flux and latent heat flux) were compared to the ASTER derived values. The results show that the derived surface variables and land surface heat fluxes in three different months over the study area are in good accordance with the land surface status. Also, the estimated land surface variables and land surface heat fluxes are in good accordance with ground measurements, and all their absolute percent difference (APD) is less than 10% in the validation sites. It is therefore concluded that the proposed methodology is successful for the retrieval of land surface variables and land surface heat fluxes using the ASTER data and filed observation over the study area.

Sign in / Sign up

Export Citation Format

Share Document