The Time-series Mid-Infrared Data Simulation for High-temporal Resolution Geostationary Satellite

2020 ◽  
Author(s):  
Kun Li ◽  
Yonggang Qian ◽  
Ning Wang ◽  
Lingling Ma ◽  
Shi Qiu ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Time Series ◽  
Land Surface ◽  
Geostationary Satellite ◽  
High Temporal Resolution ◽  
Atmospheric Parameters ◽  
Data Simulation ◽  
Mid Infrared ◽  
Directional Emissivity ◽  
Infrared Data

<p>Geostationary remote sensing satellite can provide time-series mid-infrared (MIR) data at regional scale, which plays a significant role in many applications such as environmental monitoring, fire detection and temporal change of surface parameters. Therefore more geostationary remote sensing satellite missions for earth observation are carried out and focused on directional and high-temporal resolution. Given the complex nature of the data to be expected from these missions, it is essential for a thorough preparation, which can be accomplished by simulating the image data before the actual launch. The simulation can include the top-of-atmosphere (TOA) radiance data as well as all major process parameters such as land surface temperature/emissivity and atmospheric parameters. It can be used to evaluate the capabilities of target satellite observing the earth and optimize the system according to the further analysis. In addition, the development of the data simulation will provide a considerable support for the algorithms of quantitative application.</p><p>This work addressed a method for simulating the time-series mid-infrared data of geostationary satellite based on radiative transfer model. The simulation procedure, including directional emissivity, time-series LST, time-series atmospheric parameter, sensor performance, can be shown as follows. Firstly, an empirical Bidirectional Reflectance Distribution Function (BRDF) model, i.e., the Minnaert’s model, is introduced to describe the non-Lambertian reflective behavior of land surface. Then, the directional emissivity can be calculated based on the Kirchhoff’s law with the John Hopkins University (JHU) Spectral Library as the prior knowledge. Secondly, a semi-empirical Diurnal Temperature Cycle (DTC) model with six parameters (Göttsche, F. M., and Olesen, F. S., 2001) is used to simulate the time-series LST with the interval of 15min. Thirdly, the atmospheric profiles of pressure, temperature, relative humidity (RH), and geo-potential (GP) at 0.5° latitude/longitude spatial resolutions for 8 UTC times per day provided by European Centre for Medium-Range Weather Forecasts (ECMWF) are used for atmospheric parameters. A temporal interpolation method is proposed to obtain the time-series atmospheric parameters from the ECMWF 3-hour profile. Then, the MIR spectral radiance at the top of atmosphere can be simulated by MIR radiative transfer equation with the aid of MODTRAN 5 code. Finally, by convoluting the sensor’s spectral response function, the radiance received by the sensor can be got against the instrument noise. The results show that the time-series mid-infrared data for geostationary satellite of different surface types at any angle can be well simulated using the proposed method. More comparative analysis with the geostationary satellites, such as METEOSAT, GEOS, FENGYUN, GMS etc., will be done in the future work.</p>

scholarly journals A Method for Geostationary Satellite Time-Series Thermal Infrared Data Simulation

2021 ◽  
Author(s):  
qian yonggang ◽  
kun li ◽  
Weiyuan Yao ◽  
Wan Li ◽  
Shi Qiu ◽  
...  
Keyword(s):  
Time Series ◽  
Thermal Infrared ◽  
Geostationary Satellite ◽  
Data Simulation ◽  
Infrared Data

scholarly journals A statistics-based temporal filter algorithm to map spatiotemporally continuous shortwave albedo from MODIS data

2013 ◽  
Vol 17 (6) ◽  
pp. 2121-2129 ◽  
Author(s):  
N. F. Liu ◽  
Q. Liu ◽  
L. Z. Wang ◽  
S. L. Liang ◽  
J. G. Wen ◽  
...  
Keyword(s):  
Time Series ◽  
Temporal Resolution ◽  
Land Surface ◽  
Surface Albedo ◽  
Critical Role ◽  
Radiant Energy ◽  
High Temporal Resolution ◽  
Land Surface Parameter ◽  
Temporal Filter ◽  
Moderate Resolution Imaging Spectroradiometer

Abstract. Land-surface albedo plays a critical role in the earth's radiant energy budget studies. Satellite remote sensing provides an effective approach to acquire regional and global albedo observations. Owing to cloud coverage, seasonal snow and sensor malfunctions, spatiotemporally continuous albedo datasets are often inaccessible. The Global LAnd Surface Satellite (GLASS) project aims at providing a suite of key land surface parameter datasets with high temporal resolution and high accuracy for a global change study. The GLASS preliminary albedo datasets are global daily land-surface albedo generated by an angular bin algorithm (Qu et al., 2013). Like other products, the GLASS preliminary albedo datasets are affected by large areas of missing data; beside, sharp fluctuations exist in the time series of the GLASS preliminary albedo due to data noise and algorithm uncertainties. Based on the Bayesian theory, a statistics-based temporal filter (STF) algorithm is proposed in this paper to fill data gaps, smooth albedo time series, and generate the GLASS final albedo product. The results of the STF algorithm are smooth and gapless albedo time series, with uncertainty estimations. The performance of the STF method was tested on one tile (H25V05) and three ground stations. Results show that the STF method has greatly improved the integrity and smoothness of the GLASS final albedo product. Seasonal trends in albedo are well depicted by the GLASS final albedo product. Compared with MODerate resolution Imaging Spectroradiometer (MODIS) product, the GLASS final albedo product has a higher temporal resolution and more competence in capturing the surface albedo variations. It is recommended that the quality flag should be always checked before using the GLASS final albedo product.

scholarly journals Relating Spatiotemporal Patterns of Forest Fires Burned Area and Duration to Diurnal Land Surface Temperature Anomalies

2018 ◽  
Vol 10 (11) ◽  
pp. 1777 ◽  
Author(s):  
Carmine Maffei ◽  
Silvia Alfieri ◽  
Massimo Menenti
Keyword(s):  
Remote Sensing ◽  
Time Series ◽  
Surface Temperature ◽  
Land Surface Temperature ◽  
Forest Fires ◽  
Land Surface ◽  
Fire Danger ◽  
Parametric Models ◽  
Burned Area ◽  
Informative Content

Forest fires are a major source of ecosystem disturbance. Vegetation reacts to meteorological factors contributing to fire danger by reducing stomatal conductance, thus leading to an increase of canopy temperature. The latter can be detected by remote sensing measurements in the thermal infrared as a deviation of observed land surface temperature (LST) from climatological values, that is as an LST anomaly. A relationship is thus expected between LST anomalies and forest fires burned area and duration. These two characteristics are indeed controlled by a large variety of both static and dynamic factors related to topography, land cover, climate, weather (including those affecting LST) and anthropic activity. To investigate the predicting capability of remote sensing measurements, rather than constructing a comprehensive model, it would be relevant to determine whether anomalies of LST affect the probability distributions of burned area and fire duration. This research approached the outlined knowledge gap through the analysis of a dataset of forest fires in Campania (Italy) covering years 2003–2011 against estimates of LST anomaly. An LST climatology was first computed from time series of daily Aqua-MODIS LST data (product MYD11A1, collection 6) over the longest available sequence of complete annual datasets (2003–2017), through the Harmonic Analysis of Time Series (HANTS) algorithm. HANTS was also used to create individual annual models of LST data, to minimize the effect of varying observation geometry and cloud contamination on LST estimates while retaining its seasonal variation. LST anomalies where thus quantified as the difference between LST annual models and LST climatology. Fire data were intersected with LST anomaly maps to associate each fire with the LST anomaly value observed at its position on the day previous to the event. Further to this step, the closest probability distribution function describing burned area and fire duration were identified against a selection of parametric models through the maximization of the Anderson-Darling goodness-of-fit. Parameters of the identified distributions conditional to LST anomaly where then determined along their confidence intervals. Results show that in the study area log-transformed burned area is described by a normal distribution, whereas log-transformed fire duration is closer to a generalized extreme value (GEV) distribution. The parameters of these distributions conditional to LST anomaly show clear trends with increasing LST anomaly; significance of this observation was verified through a likelihood ratio test. This confirmed that LST anomaly is a covariate of both burned area and fire duration. As a consequence, it was observed that conditional probabilities of extreme events appear to increase with increasing positive deviations of LST from its climatology values. This confirms the stated hypothesis that LST anomalies affect forest fires burned area and duration and highlights the informative content of time series of LST with respect to fire danger.

scholarly journals Harmonizing Multi-Source Remote Sensing Images for Summer Corn Growth Monitoring

2019 ◽  
Vol 11 (11) ◽  
pp. 1266 ◽  
Author(s):  
Mingzheng Zhang ◽  
Dehai Zhu ◽  
Wei Su ◽  
Jianxi Huang ◽  
Xiaodong Zhang ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Time Series ◽  
Kalman Filter ◽  
Spatial Resolution ◽  
Temporal Resolution ◽  
Meteorological Data ◽  
High Temporal Resolution ◽  
Growth Monitoring ◽  
Landsat 8 ◽  
Data Set

Continuous monitoring of crop growth status using time-series remote sensing image is essential for crop management and yield prediction. The growing season of summer corn in the North China Plain with the period of rain and hot, which makes the acquisition of cloud-free satellite imagery very difficult. Therefore, we focused on developing image datasets with both a high temporal resolution and medium spatial resolution by harmonizing the time-series of MOD09GA Normalized Difference Vegetation Index (NDVI) images and 30-m-resolution GF-1 WFV images using the improved Kalman filter model. The harmonized images, GF-1 images, and Landsat 8 images were then combined and used to monitor the summer corn growth from 5th June to 6th October, 2014, in three counties of Hebei Province, China, in conjunction with meteorological data and MODIS Evapotranspiration Data Set. The prediction residuals ( Δ P R K ) in NDVI between the GF-1 observations and the harmonized images was in the range of −0.2 to 0.2 with Gauss distribution. Moreover, the obtained phenological curves manifested distinctive growth features for summer corn at field scales. Changes in NDVI over time were more effectively evaluated and represented corn growth trends, when considered in conjunction with meteorological data and MODIS Evapotranspiration Data Set. We observed that the NDVI of summer corn showed a process of first decreasing and then rising in the early growing stage and discuss how the temperature and moisture of the environment changed with the growth stage. The study demonstrated that the synthesized dataset constructed using this methodology was highly accurate, with high temporal resolution and medium spatial resolution and it was possible to harmonize multi-source remote sensing imagery by the improved Kalman filter for long-term field monitoring.

scholarly journals Identification of catchment functional units by time series of thermal remote sensing images

2014 ◽  
Vol 18 (12) ◽  
pp. 5345-5359 ◽  
Author(s):  
B. Müller ◽  
M. Bernhardt ◽  
K. Schulz
Keyword(s):  
Remote Sensing ◽  
Principal Component Analysis ◽  
Time Series ◽  
Land Surface ◽  
Temporal Dynamics ◽  
Principal Component ◽  
Component Analysis ◽  
Land Surface Models ◽  
Surface Models ◽  
Functional Units

Abstract. The identification of catchment functional behavior with regards to water and energy balance is an important step during the parameterization of land surface models. An approach based on time series of thermal infrared (TIR) data from remote sensing is developed and investigated to identify land surface functioning as is represented in the temporal dynamics of land surface temperature (LST). For the mesoscale Attert catchment in midwestern Luxembourg, a time series of 28 TIR images from ASTER (Advanced Spaceborne Thermal Emission and Reflection Radiometer) was extracted and analyzed, applying a novel process chain. First, the application of mathematical–statistical pattern analysis techniques demonstrated a strong degree of pattern persistency in the data. Dominant LST patterns over a period of 12 years were then extracted by a principal component analysis. Component values of the two most dominant components could be related for each land surface pixel to land use data and geology, respectively. The application of a data condensation technique ("binary words") extracting distinct differences in the LST dynamics allowed the separation into landscape units that show similar behavior under radiation-driven conditions. It is further outlined that both information component values from principal component analysis (PCA), as well as the functional units from the binary words classification, will highly improve the conceptualization and parameterization of land surface models and the planning of observational networks within a catchment.

Downscaling sub-daily Land Surface Temperature time series for monitoring heat in urban environments

2020 ◽  
Author(s):  
Nikos Alexandris ◽  
Matteo Piccardo ◽  
Vasileios Syrris ◽  
Alessandro Cescatti ◽  
Gregory Duveiller
Keyword(s):  
Time Series ◽  
Heat Stress ◽  
Surface Temperature ◽  
Spatial Resolution ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Urban Environments ◽  
High Temporal Resolution ◽  
Landsat 8 ◽  
Fine Spatial Resolution

<p>The frequency of extreme heat related events is rising. This places the ever growing number of urban dwellers at higher risk. Quantifying these phenomena is important for the development and monitoring of climate change adaptation and mitigation policies. In this context, earth observations offer increasing opportunities to assess these phenomena with an unprecedented level of accuracy and spatial reach. Satellite thermal imaging systems acquire Land Surface Temperature (LST) which is fundamental to run models that study for example hotspots and heatwaves in urban environments.</p><p>Current instruments include TIRS on board Landsat 8 and MODIS on board of Terra satellites. These provide LST products on a monthly basis at 100m and twice per day at 1km respectively. Other sensors on board geostationary satellites, such as MSG and GOES-R, produce sub-hourly thermal images. For example the SEVIRI instrument onboard MSG, captures images every 15 minutes. However, this is done at an even coarser spatial resolution, which is 3 to 5 km in the case of SEVIRI. Nevertheless, none of the existing systems can capture LST synchronously with fine spatial resolution at a high temporal frequency, which is a prerequisite for monitoring heat stress in urban environments.</p><p>Combining LST time series of high temporal resolution (i.e. sub-daily MODIS- or SEVIRI-derived data) with products of fine spatial resolution (i.e. Landsat 8 products), and potentially other related variables (i.e. reflectance, spectral indices, land cover information, terrain parameters and local climatic variables), facilitates the downscaling of LST estimations. Nonetheless, considering the complexity of how distinct surfaces within a city heat-up differently during the course of a day, such a downscaling is meaningful for practically synchronous observations (e.g. Landsat-8 and MODIS Terra’s morning observations).</p><p>The recently launched ECOSTRESS mission provides multiple times in a day high spatial resolution thermal imagery at 70m. Albeit, recording the same locations on Earth every few days at varying times. We explore the associations between ECOSTRESS and Landsat-8 thermal data, based on the incoming radiation load and distinct surface properties characterised from other datasets. In our approach, first we upscale ECOSTRESS data to simulate Landsat-8 images at moments that coincide the acquisition times of other sensors products. In a second step, using the simulated Landsat-8 images, we downscale LST products acquired at later times, such as MODIS Aqua (ca. 13:30) or even the hourly MSG data. This composite downscaling procedure enables an enhanced LST estimation that opens the way for better diagnostics of the heat stress in urban landscapes.</p><p>In this study we discuss in detail the concepts of our approach and present preliminary results produced with the JEODPP, JRC's high throughput computing platform.</p>

scholarly journals Forecasting Spatio-Temporal Dynamics on the Land Surface Using Earth Observation Data—A Review

2020 ◽  
Vol 12 (21) ◽  
pp. 3513
Author(s):  
Jonas Koehler ◽  
Claudia Kuenzer
Keyword(s):  
Machine Learning ◽  
Remote Sensing ◽  
Time Series ◽  
Land Surface ◽  
Input Data ◽  
Earth Observation ◽  
Series Data ◽  
Climate Projections ◽  
Auto Regressive ◽  
Spatio Temporal

Reliable forecasts on the impacts of global change on the land surface are vital to inform the actions of policy and decision makers to mitigate consequences and secure livelihoods. Geospatial Earth Observation (EO) data from remote sensing satellites has been collected continuously for 40 years and has the potential to facilitate the spatio-temporal forecasting of land surface dynamics. In this review we compiled 143 papers on EO-based forecasting of all aspects of the land surface published in 16 high-ranking remote sensing journals within the past decade. We analyzed the literature regarding research focus, the spatial scope of the study, the forecasting method applied, as well as the temporal and technical properties of the input data. We categorized the identified forecasting methods according to their temporal forecasting mechanism and the type of input data. Time-lagged regressions which are predominantly used for crop yield forecasting and approaches based on Markov Chains for future land use and land cover simulation are the most established methods. The use of external climate projections allows the forecasting of numerical land surface parameters up to one hundred years into the future, while auto-regressive time series modeling can account for intra-annual variances. Machine learning methods have been increasingly used in all categories and multivariate modeling that integrates multiple data sources appears to be more popular than univariate auto-regressive modeling despite the availability of continuously expanding time series data. Regardless of the method, reliable EO-based forecasting requires high-level remote sensing data products and the resulting computational demand appears to be the main reason that most forecasts are conducted only on a local scale. In the upcoming years, however, we expect this to change with further advances in the field of machine learning, the publication of new global datasets, and the further establishment of cloud computing for data processing.

Sign in / Sign up

Export Citation Format

Share Document