Seismic activity along a Cretaceous magmatic intrusion in Monchique, SW Iberia

2020 ◽  
Author(s):  
Analdyne Soares ◽  
Susana Custódio ◽  
Marta Neres ◽  
Dina Vales ◽  
Luís Matias
Keyword(s):  
Seismic Activity ◽  
Active Faults ◽  
Plate Boundary ◽  
Velocity Model ◽  
Historical Record ◽  
Focal Mechanisms ◽  
Magmatic Intrusion ◽  
Mainland Portugal ◽  
3D Velocity Model ◽  
Paleozoic Rocks

<p>Iberia, located at the southwestern end of Europe, displays a complex pattern of seismic activity, with most known active faults slipping at low rates (< 1 mm/yr). However, the seismic activity is remarkable, with numerous earthquakes in the historical record proving destructive. The earthquake cluster in mainland Portugal that has a highest rate of seismic activity is very localized (small spatial extent), extends vertically from 5 to 20 km depth and lays on the Monchique late Cretaceous magmatic intrusion, in SW Portugal. This magmatic intrusion forms strong rheological contrast between the intruded magmatic rocks and surrounding Paleozoic rocks. Furthermore, it is the locus of abundant natural water springs. Several pertinent questions remain to be answered concerning earthquakes in Monchique: Are earthquakes in Monchique simply a response to tectonic stresses (given the proximity of Monchique to the EU-AF plate boundary), with the localization of brittle failure in the region facilitated by the rheological contrast between the Cretaceous intrusion and surrounding Paleozoic rocks? Do fluids play a role in facilitating slip in existing fractures? Or, conversely, is the circulation of fluids facilitated by the faulting that results from the rheological contrasts? Are there hazardous faults in Monchique? In this presentation, we re-analyze in detail the seismic data recorded by the regional permanent seismic network, in order to better understand the relationship between seismic activity and igneous intrusion. In particular, we re-locate earthquakes using NonLinLoc and PRISM3D, a 3D velocity model for the region. At a subsequent step, we re-locate earthquakes using HypoDD. We also perform a clustering analysis based on waveform similarity and compute focal mechanisms for the region. The results show that earthquakes align along two main directions, E-W and NNE-SSW, coinciding with surface features of the magmatic intrusion. Focal mechanisms indicate dominantly strike-slip faulting, with the possible fault planes coinciding with the favored directions of earthquake lineations. We investigate the spatio-temporal evolution of seismicity and address possible forcing mechanisms, including tidal forcing.</p><p> </p><p> </p><p><span>The author would like to acknowledge the financial support  FCT through project</span><span> UIDB/50019/2020 </span>– IDL and PTDC/GEO-FIQ/2590/2014 - SPIDER.</p>

scholarly journals Earthquake relocation for North-Western Greece using 3D crustal model; method comparison and seismotectonic interpretation.

2016 ◽  
Vol 47 (3) ◽  
pp. 1269 ◽  
Author(s):  
O. Stavroulopoulou ◽  
E. Sokos ◽  
N. Martakis ◽  
G. A. Tselentis
Keyword(s):  
Standard Procedure ◽  
Method Comparison ◽  
Velocity Model ◽  
Focal Mechanisms ◽  
Double Difference ◽  
Location Method ◽  
Hypocenter Distribution ◽  
3D Velocity Model ◽  
1D Model ◽  
Northwestern Greece

A dense microseismic network was installed in Northwestern Greece for a period of eleven months. A total of 1368 events were recorded and located using a 1D model. These events were also used to derive a 3D velocity model for the area. This work presents results from further processing of the data using (a) simple location method of events in a 1D medium through Hypo71 standard procedure; (b) location via the probabilistic, non-linear earthquake location method in 3D medium; (c) relocation of the events using the Double - Difference method in 1D medium; and (d) the same relocation  procedure  invoking  3D  medium.  The  application  of  different  location methodologies results in slightly different locations, which are evaluated using as criterion the compactness of hypocenter distribution. The three point method was used in order to derive linear characteristics from the hypocenter distribution and the final results were compared against the focal mechanisms of the events as computed using the polarity method and the 3D velocity model. The combination of accurately computed hypocenters and focal mechanisms provides important information for the seismotectonics of Epirus

scholarly journals Recent geodynamics, active faults and earthquake focal mechanisms of the zone of pseudosubduction interaction between the Northern and Southern Caucasus microplates in the southern slope of the Greater Caucasus (Azerbaijan)

2018 ◽  
Vol 9 (4) ◽  
pp. 1099-1126 ◽  
Author(s):  
T. N. Kangarli ◽  
F. A. Kadirov ◽  
G. J. Yetirmishli ◽  
F. A. Aliyev ◽  
S. E. Kazimova ◽  
...  
Keyword(s):  
Seismic Activity ◽  
Active Faults ◽  
Accretionary Prism ◽  
Focal Mechanisms ◽  
Northern Caucasus ◽  
Seismic Events ◽  
Southern Slope ◽  
Compression Process ◽  
Greater Caucasus ◽  
Southern Caucasus

Our study was focused on the active tectonics of the southern slope of the Greater Caucasus within Azerbaijan. The study area is the zone of under-thrusting (pseudosubduction) interaction between Southern and Northern Caucasus continental microplates, which caused the tectonic stratification of the Alpine formations into various allochthonous and parauthochthonous thrust slices of southern vergency between the Middle Bajocian and Quaternary periods. These slices are grouped into the nappe complexes that form the modern structure of the trough in the study area. The large linearly stretched tectonic units (megazones) correspond to the axis of the Alpine marginal sea basin, the consolidated crust of which is subjected to destruction and thinning. The trough’s Alpine cover was compressed in the underthrust zone and pushed southwards. As a result, an accretionary prism formed allochthonously overlapping the northern side of the Southern Caucasus microplate by the system of gently dipping overthrusts. During the continental stage of Alpine tectogenesis (starting from the end of Miocene), intensive lateral compression process was caused by intrusion of the frontal wedge of the Arabian indenter into the buffer structures of the southern frame of Eurasia. This is evidenced by the GPS monitoring data on modern geodynamic activity, which demonstrates the Southern Caucasus block’s intensive (up to 29 mm/year) intrusion in the northern rhumbs as compared to the relative stability of the Northern Caucasus microplate (0–6 mm/year). This, in turn, is a reflection of the ongoing pseudosubduction regime (continental subduction or S-subduction) at the band of collision junction of these microplates. It is suggested that this process caused historically observed seismic activity in the study area, wherein the earthquakes occurred mainly in the southern slope’s accretionary prism area and the adjacent strip of the Southern Caucasus microplate. In this article, we analyze and correlate the whole range of seismic events that occurred in the study area until 2017 and the focal mechanisms of the recently recorded earthquakes (2012–2016). It is established that earthquake foci are confined either to the intersection nodes of variously trending ruptures with the faults of different directions or to the planes of deep tectonic ruptures and lateral displacements along the unstable contacts between the material complexes with different competence. The focal mechanisms of seismic events reveal various, mostly near-vertical, planes of normal and strike-slip faults. However, the earthquake foci are generally confined to the intersection nodes between the Caucasus and anti-Caucasus-striking rupture dislocations. The results of our studies are interesting in terms of their real-time application for drawing a regional summary of causes for both geodynamic and seismic activity of the Greater Caucasus system and the adjacent areas of Alpine-Himalayan fold belt.

scholarly journals A new probabilistic seismic hazard assessment for greater Tokyo

2006 ◽  
Vol 364 (1845) ◽  
pp. 1965-1988 ◽  
Author(s):  
Ross S Stein ◽  
Shinji Toda ◽  
Tom Parsons ◽  
Elliot Grunewald
Keyword(s):  
Active Faults ◽  
Plate Boundary ◽  
Seismic Hazard Assessment ◽  
Historical Record ◽  
Probabilistic Seismic Hazard Assessment ◽  
Earthquake Hazards ◽  
Seismic Behaviour ◽  
Ground Acceleration ◽  
The Past ◽  
The Pacific

Tokyo and its outlying cities are home to one-quarter of Japan's 127 million people. Highly destructive earthquakes struck the capital in 1703, 1855 and 1923, the last of which took 105 000 lives. Fuelled by greater Tokyo's rich seismological record, but challenged by its magnificent complexity, our joint Japanese–US group carried out a new study of the capital's earthquake hazards. We used the prehistoric record of great earthquakes preserved by uplifted marine terraces and tsunami deposits (17 M ∼8 shocks in the past 7000 years), a newly digitized dataset of historical shaking (10 000 observations in the past 400 years), the dense modern seismic network (300 000 earthquakes in the past 30 years), and Japan's GeoNet array (150 GPS vectors in the past 10 years) to reinterpret the tectonic structure, identify active faults and their slip rates and estimate their earthquake frequency. We propose that a dislodged fragment of the Pacific plate is jammed between the Pacific, Philippine Sea and Eurasian plates beneath the Kanto plain on which Tokyo sits. We suggest that the Kanto fragment controls much of Tokyo's seismic behaviour for large earthquakes, including the damaging 1855 M ∼7.3 Ansei-Edo shock. On the basis of the frequency of earthquakes beneath greater Tokyo, events with magnitude and location similar to the M ∼7.3 Ansei-Edo event have a ca 20% likelihood in an average 30 year period. In contrast, our renewal (time-dependent) probability for the great M ≥7.9 plate boundary shocks such as struck in 1923 and 1703 is 0.5% for the next 30 years, with a time-averaged 30 year probability of ca 10%. The resulting net likelihood for severe shaking ( ca 0.9 g peak ground acceleration (PGA)) in Tokyo, Kawasaki and Yokohama for the next 30 years is ca 30%. The long historical record in Kanto also affords a rare opportunity to calculate the probability of shaking in an alternative manner exclusively from intensity observations. This approach permits robust estimates for the spatial distribution of expected shaking, even for sites with few observations. The resulting probability of severe shaking is ca 35% in Tokyo, Kawasaki and Yokohama and ca 10% in Chiba for an average 30 year period, in good agreement with our independent estimate, and thus bolstering our view that Tokyo's hazard looms large. Given $1 trillion estimates for the cost of an M ∼7.3 shock beneath Tokyo, our probability implies a $13 billion annual probable loss.

scholarly journals The recent instrumental seismicity of Syria and its implications

2018 ◽  
Vol 57 (2) ◽  
Author(s):  
Mohamad Khir Abdul-Wahed ◽  
Jamal Asfahani
Keyword(s):  
Seismic Activity ◽  
Current Knowledge ◽  
Active Faults ◽  
Historical Seismicity ◽  
Focal Mechanisms ◽  
Seismic Events ◽  
Earthquake Activity ◽  
Return Periods ◽  
Cluster Type ◽  
Large Earthquakes

This contribution is an attempt to enlarge the current knowledge about the recent instrumental seismicity, recorded during the period 1995- 2012 by the Syrian national seismological network, as well as the seismotectonic settings in Syria. The recent instrumental seismicity has shown that the earthquake activity has produced a little number of low magnitude events. Consequently, it indicates that this activity is actually passing through a relative quiescence in comparison with the historical seismicity. The correlation between the instrumental seismicity and the seismotectonic features was performed by analyzing spatial distributions of seismic events and focal mechanisms of some strongest events. The current results, allow observing many types of the seismic activity as follows: Swarm-type, Cluster- type, and Occasional-type, which could improve the understanding of the behavior of the seismically active faults. The long return periods of large earthquakes (M?5) and the shortness of instrumental seismicity, prevent us to completely characterize the seismic activity and to discover all the active faults in the country.

scholarly journals New seismological data from the Calabrian arc reveal arc-orthogonal extension across the subduction zone

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Tiziana Sgroi ◽  
Alina Polonia ◽  
Graziella Barberi ◽  
Andrea Billi ◽  
Luca Gasperini
Keyword(s):  
Lateral Displacement ◽  
Tectonic Setting ◽  
Plate Boundary ◽  
Velocity Model ◽  
Tectonic Deformation ◽  
Accretionary Wedge ◽  
Tectonic Structures ◽  
Plate Convergence ◽  
Seismogenic Layer ◽  
Regional Tectonic

AbstractThe Calabrian Arc subduction-rollback system along the convergent Africa/Eurasia plate boundary is among the most active geological structures in the Mediterranean Sea. However, its seismogenic behaviour is largely unknown, mostly due to the lack of seismological observations. We studied low-to-moderate magnitude earthquakes recorded by the seismic network onshore, integrated by data from a seafloor observatory (NEMO-SN1), to compute a lithospheric velocity model for the western Ionian Sea, and relocate seismic events along major tectonic structures. Spatial changes in the depth distribution of earthquakes highlight a major lithospheric boundary constituted by the Ionian Fault, which separates two sectors where thickness of the seismogenic layer varies over 40 km. This regional tectonic boundary represents the eastern limit of a domain characterized by thinner lithosphere, arc-orthogonal extension, and transtensional tectonic deformation. Occurrence of a few thrust-type earthquakes in the accretionary wedge may suggest a locked subduction interface in a complex tectonic setting, which involves the interplay between arc-orthogonal extension and plate convergence. We finally note that distribution of earthquakes and associated extensional deformation in the Messina Straits region could be explained by right-lateral displacement along the Ionian Fault. This observation could shed new light on proposed mechanisms for the 1908 Messina earthquake.

Passive seismic tomography using recorded microseismicity: Application to mining-induced seismicity

Geophysics ◽  
2019 ◽  
Vol 84 (1) ◽  
pp. B41-B57 ◽  
Author(s):  
Himanshu Barthwal ◽  
Mirko van der Baan
Keyword(s):  
Seismic Tomography ◽  
Velocity Model ◽  
P Wave ◽  
Double Difference ◽  
Lateral Velocity ◽  
Study Region ◽  
Arrival Times ◽  
3D Velocity Model ◽  
Passive Seismic ◽  
Dip Angle

Microseismicity is recorded during an underground mine development by a network of seven boreholes. After an initial preprocessing, 488 events are identified with a minimum of 12 P-wave arrival-time picks per event. We have developed a three-step approach for P-wave passive seismic tomography: (1) a probabilistic grid search algorithm for locating the events, (2) joint inversion for a 1D velocity model and event locations using absolute arrival times, and (3) double-difference tomography using reliable differential arrival times obtained from waveform crosscorrelation. The originally diffusive microseismic-event cloud tightens after tomography between depths of 0.45 and 0.5 km toward the center of the tunnel network. The geometry of the event clusters suggests occurrence on a planar geologic fault. The best-fitting plane has a strike of 164.7° north and dip angle of 55.0° toward the west. The study region has known faults striking in the north-northwest–south-southeast direction with a dip angle of 60°, but the relocated event clusters do not fall along any mapped fault. Based on the cluster geometry and the waveform similarity, we hypothesize that the microseismic events occur due to slips along an unmapped fault facilitated by the mining activity. The 3D velocity model we obtained from double-difference tomography indicates lateral velocity contrasts between depths of 0.4 and 0.5 km. We interpret the lateral velocity contrasts in terms of the altered rock types due to ore deposition. The known geotechnical zones in the mine indicate a good correlation with the inverted velocities. Thus, we conclude that passive seismic tomography using microseismic data could provide information beyond the excavation damaged zones and can act as an effective tool to complement geotechnical evaluations.

scholarly journals Relationship between seismicity and eruptive activity at Mt. Etna volcano (Italy) as inferred from historical record analysis: the 1883 and 1971 case histories

1996 ◽  
Vol 39 (2) ◽  
Author(s):  
R. Azzaro ◽  
M. S. Barbano
Keyword(s):  
Seismic Activity ◽  
Historical Record ◽  
Effusion Rate ◽  
Etna Volcano ◽  
Case Histories ◽  
Seismic Behaviour ◽  
Volcanic System ◽  
Prolonged Duration ◽  
Mt Etna ◽  
A Minor

In this paper historical and recent seismological data are analysed in order to investigate the relationship between seismicity and eruptive phenomena at Mt. Etna volcano. The 1883 and 1971 case histories have been proposed because they are significant events in the recent history of the volcano regarding volcanic hazard and show very different evolutions of associated seismic activity and eruption dynamics. The first (1883) represents flank eruptions characterised by high seismic release, short duration and moderate effusion rate whereas the second (1971) can be ascribed to eruptions starting as summit or subterminal events and thereafter developing on the flanks with a minor level of seismicity, higher effusion rate and prolonged duration. The pattern of seismic activity during 1883 and 1971, as inferred from historical record analysis, and the different associated type of eruption may be a result of diverse stress conditions acting on the volcanic system. The interpretation of the seismic behaviour by considering historical eruptions in a systematic fashion will contribute to a clearer understanding of volcanic phenomena at Mt. Etna.

Sign in / Sign up

Export Citation Format

Share Document