Numerical study on debris flow in step-pools channel using smoothed particle hydrodynamics method

2020 ◽  
Author(s):  
Shuai Li ◽  
Xiaoqing Chen ◽  
Chong Peng ◽  
Jiangang Chen
Keyword(s):  
Debris Flow ◽  
Smoothed Particle Hydrodynamics ◽  
Debris Flows ◽  
Impact Force ◽  
Numerical Study ◽  
Particle Hydrodynamics ◽  
Smoothed Particle ◽  
Smoothed Particle Hydrodynamics Method ◽  
The Impact ◽  
Peak Impact Force

<p>Drainage channel with step-pool systems are widely used to control debris flow. However, the blocking of debris flow often gives rise to local damage at the steps and baffles. Hence, the estimation of impact force of debris flow is crucial for design step-pools channel. This paper presents a numerical study on the impact behavior of debris flows using SPH (Smoothed Particle Hydrodynamics) method. Some important parameters, such as the baffle shape (square, triangle, and trapezoid) and the densities of debris flows are considered to examine their influence on the impact force. The results show that the largest peak impact force is obtained at the second last baffle, rather than the first baffle. Moreover, the square baffle gives rise to the largest impact force whereas the triangle baffle bears the smallest one among the three baffles. Generally, the peak impact force increases with increasing the inflow density. However, a threshold density, beyond which the peak impact force will decrease, is suggested by the simulations. Based on the numerical results, an improved expression to predict the impact force considering the inclined angle of baffle is proposed.</p>

scholarly journals Numerical Simulation of Non-Homogeneous Viscous Debris-Flows Based on the Smoothed Particle Hydrodynamics (SPH) Method

Water ◽  
2019 ◽  
Vol 11 (11) ◽  
pp. 2314 ◽  
Author(s):  
Shu Wang ◽  
Anping Shu ◽  
Matteo Rubinato ◽  
Mengyao Wang ◽  
Jiping Qin
Keyword(s):  
Debris Flow ◽  
Water Content ◽  
Smoothed Particle Hydrodynamics ◽  
Debris Flows ◽  
Sph Method ◽  
Particle Hydrodynamics ◽  
Sph Model ◽  
Smoothed Particle ◽  
The Impact ◽  
Kinetic And Potential Energies

Non-homogeneous viscous debris flows are characterized by high density, impact force and destructiveness, and the complexity of the materials they are made of. This has always made these flows challenging to simulate numerically, and to reproduce experimentally debris flow processes. In this study, the formation-movement process of non-homogeneous debris flow under three different soil configurations was simulated numerically by modifying the formulation of collision, friction, and yield stresses for the existing Smoothed Particle Hydrodynamics (SPH) method. The results obtained by applying this modification to the SPH model clearly demonstrated that the configuration where fine and coarse particles are fully mixed, with no specific layering, produces more fluctuations and instability of the debris flow. The kinetic and potential energies of the fluctuating particles calculated for each scenario have been shown to be affected by the water content by focusing on small local areas. Therefore, this study provides a better understanding and new insights regarding intermittent debris flows, and explains the impact of the water content on their formation and movement processes.

scholarly journals Effects of Barrier Stiffness on Debris Flow Dynamic Impact—II: Numerical Simulation

Water ◽  
2022 ◽  
Vol 14 (2) ◽  
pp. 182
Author(s):  
Yu Huang ◽  
Xiaoyan Jin ◽  
Junji Ji
Keyword(s):  
Debris Flow ◽  
Smoothed Particle Hydrodynamics ◽  
Impact Force ◽  
Time History ◽  
Appreciable Effect ◽  
Engineering Structures ◽  
Dynamic Component ◽  
Particle Hydrodynamics ◽  
Smoothed Particle ◽  
The Impact

The destructive and impactful forces of debris flow commonly causes local damage to engineering structures. The effect of a deformable barrier on the impact dynamics is important in engineering design. In this study, a flow–structure coupled with Smoothed Particle Hydrodynamics model was presented to investigate the effects of barrier stiffness on the debris impact. A comparison of the results of physical tests and simulation results revealed that the proposed smoothed particle hydrodynamics model effectively reproduces the flow kinematics and time history of the impact force. Even slight deflections of the deformable barrier lead to obvious attenuation of the peak impact pressure. Additionally, deformable barriers with lower stiffness tend to deform more downstream upon loading, shifting the deposited sand toward the active failure mode and generating less static earth pressure. When the debris flow has a higher frontal velocity, the impact force on the barrier is dominated by the dynamic component and there is an appreciable effect of the stiffness of the deformable barrier on load attenuation.

scholarly journals A Numerical Study of Fluid Flow in a Vertical Slot Fishway with the Smoothed Particle Hydrodynamics Method

Water ◽  
2019 ◽  
Vol 11 (9) ◽  
pp. 1928 ◽  
Author(s):  
Gorazd Novak ◽  
Angelantonio Tafuni ◽  
José M. Domínguez ◽  
Matjaž Četina ◽  
Dušan Žagar
Keyword(s):  
Smoothed Particle Hydrodynamics ◽  
Numerical Study ◽  
Free Surface Flows ◽  
Open Boundary ◽  
Doppler Velocity ◽  
Vertical Slot ◽  
Particle Hydrodynamics ◽  
Smoothed Particle ◽  
Smoothed Particle Hydrodynamics Method ◽  
Vertical Slot Fishway

Fishways have a great ecological importance as they help mitigate the interruptions of fish migration routes. In the present work, the novel DualSPHysics v4.4 solver, based on the smoothed particle hydrodynamics method (SPH), has been applied to perform three-dimensional (3-D) simulations of water flow in a vertical slot fishway (VSF). The model has been successfully calibrated against published field data of flow velocities that were measured with acoustic Doppler velocity probes. A state-of-the-art algorithm for the treatment of open boundary conditions using buffer layers has been applied to accurately reproduce discharges, water elevations, and average velocity profiles (longitudinal and transverse velocities) within the observed pool of the VSF. Results herein indicate that DualSPHysics can be an accurate tool for modeling turbulent subcritical free surface flows similar to those that occur in VSF. A novel relation between the number of fluid particles and the artificial viscosity coefficient has been formulated with a simple logarithmic fit.

scholarly journals Numerical Modeling of Debris Flows Induced by Dam-Break Using the Smoothed Particle Hydrodynamics (SPH) Method

2020 ◽  
Vol 10 (8) ◽  
pp. 2954 ◽  
Author(s):  
Anping Shu ◽  
Shu Wang ◽  
Matteo Rubinato ◽  
Mengyao Wang ◽  
Jiping Qin ◽  
...  
Keyword(s):  
Debris Flow ◽  
Smoothed Particle Hydrodynamics ◽  
Formation Process ◽  
Debris Flows ◽  
Dam Break ◽  
Virtual Mass ◽  
Sph Method ◽  
Particle Hydrodynamics ◽  
Smoothed Particle ◽  
Number Of Particles

Dam-break flows may change into debris flows if certain conditions are satisfied, such as abundant loose material and steep slope. These debris flows are typically characterized by high density and can generate strong impact forces. Due to the complexity of the materials that they are made of, it has always been very challenging to numerically simulate these phenomena and accurately reproduce experimentally debris flows’ processes. Therefore, to fill this gap, the formation-movement processes of debris flows induced by dam-break were simulated numerically, modifying the existing smoothed particle hydrodynamics (SPH) method. By comparing the shape and the velocity of dam break debris flows under different configurations, it was found that when simulating the initiation process, the number of particles in the upstream section is overestimated while the number of particles in the downstream area is underestimated. Furthermore, the formation process of dam-break debris flow was simulated by three models which consider different combinations of the viscous force, the drag force and the virtual mass force. The method taking into account all these three kinds of interface forces produced the most accurate outcome for the numerical simulation of the formation process of dam-break debris flow. Finally, it was found that under different interface force models, the particle velocity distribution did not change significantly. However, the direction of the particle force changed, which is due to the fact that the SPH model considers generalized virtual mass forces, better replicating real case scenarios. The modalities of dam failures have significant impacts on the formation and development of debris flows. Therefore, the results of this study will help authorities to select safe sites for future rehabilitation and relocation projects and can also be used as an important basis for debris flow risk management. Future research will be necessary to understand more complex scenarios to investigate mechanisms of domino dam-failures and their effects on debris flows propagation.

Sign in / Sign up

Export Citation Format

Share Document