Karst porosity development in layered and fractured carbonates: field evidences of structural control on sulfuric acid speleogenesis (Majella Massif, Italy)

Author(s):  
Luca Pisani ◽  
Marco Antonellini ◽  
Ilenia Maria D'Angeli ◽  
Jo De Waele

<p>Sulfuric acid speleogenesis (SAS) has been widely recognized as one of the most aggressive processes involving carbonate dissolution and rapid formation of karst porosity under hypogenic conditions. Italian carbonate sequences, and especially those outcropping in the Central Apennines, host some of the best studied hypogenic SAS caves of Italy (such as Frasassi, Monte Cucco, Acquasanta Terme, just to mention the most famous).</p><p>The Cavallone-Bove cave system (CBS) is one of the longest natural caves in Abruzzo region (over 1 km of length) and opens at ca 1470 m asl in the Taranta Gorge, Majella Massif. The sulfuric-acid origin of this inactive hypogenic system has been previously proven by D’Angeli et al. (2019) using field evidences, secondary minerals and stable isotopes analysis. <sup>40</sup>Ar/<sup>39</sup>Ar dating of alunite deposits suggested the SAS process occurred about 1.52 ± 0.28 Ma.</p><p>Both caves are characterized by a main sub-horizontal rounded or trapezoidal passage with only minor secondary branches and sub-vertical rift-conduits (feeders). Spatial geometry and arrangement of CBS conduits differs significantly from typical SAS water table caves, where complex anastomotic or maze network patterns are observed. Combining classical geological surveys, fracture stratigraphy and cave morphogenetical analysis we characterized the speleogenesis of the CBS. Field observations, remote sensing, detailed geological and geomorphological surveys were performed to characterize the structural evolution of the carbonate sequence hosting the caves, and to explain the relationship with the peculiar spatial and functional organization of CBS.</p><p>Our work highlights that lithostratigraphy and fractures pattern guide the development of karst macro-porosity in a specific stratigraphic interval within the Santo Spirito Formation, consisting mainly of layered micritic limestones, confined at the top by a chert interlayers dominant member. Through-going faults and fracture-clusters zones are identified as the main permeability pathways for ascending and laterally spreading H<sub>2</sub>S fluids, influencing the spatial localization of conduits. These fluids reacted close to past water table in oxi-conditions, creating aggressive H<sub>2</sub>SO<sub>4</sub>. Sulphur stable isotopes signatures of secondary minerals suggest an origin for these H<sub>2</sub>S bearing fluids from deep-seated Triassic evaporites interacting with hydrocarbons, thus migrated upward through a network of interconnected fractures. Permeability pathways for this vertical ascending flow were provided by NW-SE persistent strike-slip fault zones segmenting the eastern front of the Majella anticline structure and NNE-SSW striking fracture-clusters localized in the hinge zone of the fold.</p>

Author(s):  
Ilenia M. D’Angeli ◽  
Jo De Waele ◽  
Adriano Fiorucci ◽  
Bartolomeo Vigna ◽  
Stefano M. Bernasconi ◽  
...  

AbstractThis work describes the geochemical and hydrogeological characteristics of Santa Cesarea Terme, an active sulfuric acid speleogenetic system located along the Adriatic coastline (Apulia, southern Italy). It represents a very peculiar site, where rising thermal and acidic waters mix with seawater creating undersaturated solutions with respect to CaCO3, able to dissolve and corrode limestone and create caves. The Santa Cesarea Terme system is composed of four caves: Fetida, Sulfurea, Gattulla, and Solfatara. Hypogene morphologies and abundant deposits of native sulfur (especially in Gattulla Cave) and sulfate minerals are present in these caves. Fetida and Gattulla caves were investigated primarily because they are easily accessible throughout the whole year through artificial entrances, the other caves being reachable only from the sea. Geochemical analysis of water, monitoring of cave atmosphere, and measurement of the stable isotopes of S, O, and H helped to identify the main processes occurring in this complex cave system. In particular, changes in Ba2+ and Sr2+ concentration allowed for the identification of two main domains of influence, characterized by marine and rising acidic waters.


2015 ◽  
Vol 410 ◽  
pp. 21-27 ◽  
Author(s):  
Daniel S. Jones ◽  
Lubos Polerecky ◽  
Sandro Galdenzi ◽  
Brian A. Dempsey ◽  
Jennifer L. Macalady
Keyword(s):  

Geomorphology ◽  
2016 ◽  
Vol 253 ◽  
pp. 452-467 ◽  
Author(s):  
Jo De Waele ◽  
Philippe Audra ◽  
Giuliana Madonia ◽  
Marco Vattano ◽  
Lukas Plan ◽  
...  

Geomorphology ◽  
2016 ◽  
Vol 253 ◽  
pp. 385-405 ◽  
Author(s):  
Alexander Klimchouk ◽  
Augusto S. Auler ◽  
Francisco H.R. Bezerra ◽  
Caroline L. Cazarin ◽  
Fabrizio Balsamo ◽  
...  

2018 ◽  
Vol 47 (3) ◽  
pp. 271-291 ◽  
Author(s):  
Ilenia D'Angeli ◽  
◽  
Cristina Carbone ◽  
Maria Nagostinis ◽  
Mario Parise ◽  
...  

2015 ◽  
Vol 186 (6) ◽  
pp. 429-450 ◽  
Author(s):  
Laurent Beccaletto ◽  
Laure Capar ◽  
Olivier Serrano ◽  
Stéphane Marc

AbstractStephanian to Permian post-orogenic basins (SPB) outcrop in several limited locations in and around the present-day French Variscan basement. Little is known about their subsurface occurrences beneath the post-depositional sedimentary cover. Our work intends to decipher the structural evolution of the hidden SPB in the southwestern Paris basin, where only a few regional studies have aimed to determine their location beneath the Mesozoic sedimentary cover.Our approach is based on the reprocessing and interpretation of 36 seismic lines (1480 km) acquired by the oil industry in the 1980s in the southwestern Paris basin. We first obtain a comprehensive view of the geometry of the SPB, based on (i) the interpretation of the base of the Stephano-Permian surface (lower limit) and the erosional base of the surface of the Triassic layers (upper limit) and (ii) the recognition of specific internal geometries and seismic facies. The interpreted faults are grouped into different categories according to their period of activity, with a focus on synsedimentary faults related to thickness variations of the Stephano-Permian deposits. We then propose a structural scheme containing faults that were active during the Stephano-Permian period, in relation to the late-Variscan structural pattern which has led to the recognition of five sets of faults: N140-trending faults associated with secondary N155- and N055-trending faults (Arpheuilles basin); N115-trending faults (Contres basin); N030-trending faults (Brécy basin); NS-trending faults (transition between the Contres and Brécy basins). Based on the seismic interpretation, thickness maps are calculated both in time and in meters, allowing a pseudo-3D view of the three identified SPB, with thicknesses up to 3000 m (Contres basin); these maps indicate that the preserved extents and thicknesses of the basins in the subsurface are systematically greater than those observed at outcrop.Finally, we show that the SPB were filled during two different tectonic phases: (i) an initial period of opening of the Arpheuilles, Contres and Brécy basins, during which Stephanian conglomeratic/coal facies were deposited under a strong structural control (normal faulting with certainly a strike-slip component, wedge-shaped geometry of the sediments); (ii) a consecutive pre-Triassic tectonic activity (N155-trending strike-slip in the Arpheuilles basin, uplift of the margins of the three basins), at the origin of a significant part of the sedimentary filling of the basins; this vertical uplift may have reached 2000 m.


2007 ◽  
Vol 1056 ◽  
Author(s):  
Etsuji Fukui ◽  
Keiske Shinohara ◽  
Kazuki Nakanishi ◽  
Kazuyoshi Kanamori ◽  
Teiichi Hanada

ABSTRACTThermoporometry was employed to monitor the mesopore evolution in wet, drying and heat-treatment stages of monolithic macro/mesoporous silica with SBA-15 like structure. Direct comparison of mesopores in wet state was only possible with the samples extracted with sulfuric acid. In good agreement with the preceding study, the sulfuric acid not only removed the surfactant but also modified the silica gel network into that with reduced amount of micropores and increased stability against the drying stress. Thermoporometry revealed that the structural evolution takes place completely in the wet condition, which accompanies a decrease in the thickness of non-freezable water.


Sign in / Sign up

Export Citation Format

Share Document