Improving Focal Mechanisms for Earthquakes in Taiwan Strait and Ryukyu Subduction Zone with Broadband Waveforms of Combined Networks

Author(s):  
Chieh-Chen Lee ◽  
Tai-Lin Tseng ◽  
Pei-Ru Jian

<p>  Taiwan region is a seismically active region formed by the oblique convergence between Philippine Sea Plate and Eurasia Plate. Focal mechanisms of most small-moderate sized earthquakes can be well constrained by the local seismic array, except for those occurred offshore Taiwan where azimuthal coverage is limited. To better understand the tectonic structures, it is desirable to improve the focal mechanisms using better located hypocenters, reasonable velocity models, and the best available stations. In this study we focus on the shallow earthquakes in Taiwan Strait and the intermediate-depth earthquakes in southernmost Ryukyu. Both regions are less explored but large historic events had been reported.</p><p>  For earthquakes in Taiwan Strait, we systematically studied earthquakes from 1996 to 2019, including the M<sub>w</sub>5.7 Taiwan Shoal sequence happened on 2018/11/25. A total of 22 new moment tensors (MTs) were resolved in the passive margin by combining Fujian and Taiwan seismic networks from either side of the strait. For events closer to Fujian, China, the velocity model with Moho depth of 35 km yields overall lower compensated linear vector dipole (CLVD) and acceptable misfit values; while as a 40 km thick crust is better for events closer to or on the shore of Taiwan. This Moho variation under the Taiwan Strait, although subtle, agrees well with the velocity structure constrained independently by previous studies. Earthquakes in the middle of the strait are dominant in strike-slip and normal slip within 30 km depth. Shallow thrusting events are found only in the Miaoli offshore area of Taiwan. As for the 2018 Taiwan Shoal earthquake sequence, it is located right on the region absence of known fault-plane solutions, therefore offers important new constraints. All events of the sequence show high angle strike-slips and shallow centroid depth of 11-21 km, more consistent with seismicity determined by Fujian seismic center. This event is far away from the M8 1604 Quanzhou earthquake, and is also clearly unrelated to the structure of 1994 M<sub>w </sub>6.7 normal-faulting event in Tainan Basin. The 2018 sequence is probably the reactivation of a pre-existing normal fault that was created by rifting during the Cenozoic.</p><p>  For future work, we will re-evaluate the MTs of M>5.5 intermediate-depth earthquakes of the Ryukyu subduction zone by including waveforms of stations YNG and IGK from Japan network in the inversion. We will also test different upper mantle velocities in the model for the computation of Green’s functions. We anticipate that our work can provide a set of parameters more suitable for the MT inversion, and the MT results can delineate the Ryukyu subduction zone properties better.</p><p> </p><p>keywords : Taiwan Strait, focal mechanisms, moment tensor inversion</p>

2021 ◽  
Author(s):  
Carolina López-Sánchez ◽  
Elisa Buforn ◽  
Maurizio Mattesini ◽  
Simone Cesca ◽  
Juan Vicente Cantavella ◽  
...  

<p>One of the characteristics of the seismicity in the Ibero-Maghrebian region is the occurrence of intermediate depth earthquakes (50<h<100 km), their largest concentration located at the western part of the Alboran Sea, with epicenters following an NNE-SSW alignment. In this study, we have relocated over 200 intermediate depth earthquakes (M≥3) occurred in this region in the period 2000-2020, using a non-linear probabilistic approach (NonLinLoc algorithm) together with a recent regional 3D tomography lithospheric velocity model for the Alboran-Betic Rif Zone. Maximum likelihood hypocenters confirm the NNE-SSW distribution in a depth range between 50 and 100 km. We have determined the focal mechanisms of 26 of these earthquakes with magnitudes (mb) greater than 3.9. We first derived focal mechanisms using the P-wave first motion polarity method and then performed a moment tensor inversion, using a probabilistic inversion approach based on the simultaneous fit of waveforms and amplitude spectra of P and S phases. We performed an accurate resolution study, by repeating the inversion using different 1-D velocity models and testing different moment tensor (MT) constraints: a full moment tensor, a deviatoric moment tensor and a pure double couple (DC). Misfit values are similar for different MT constraints. Most solutions have a non-DC component larger than 30%. This may be due to the tectonic complexity of the region and the use on the inversion of 1-D Earth model. The DC components obtained from the inversion show different orientations of the nodal planes. A first group of events to the northern part with epicenters inland on south Spain have horizontal tension axes in NE-SW direction. A second group of earthquakes with epicenters off-shore, but close to the Spanish coast, presents near-vertical pressure axes. The third group, formed by deeper earthquakes, with epicenters on the center of the Alboran sea have dip slip focal mechanisms of either normal or reverse motion with planes either vertical or dipping 45º plane oriented in NNE-SSW direction, approximately the same orientation as the alignment of their epicenters. The distribution of these intermediate depth earthquakes and their focal mechanisms evidence the seismotectonic complexity of the region related with a possible subduction.</p>


2021 ◽  
Author(s):  
Francesca D’Ajello Caracciolo ◽  
Rodolfo Console

AbstractA set of four magnitude Ml ≥ 3.0 earthquakes including the magnitude Ml = 3.7 mainshock of the seismic sequence hitting the Lake Constance, Southern Germany, area in July–August 2019 was studied by means of bulletin and waveform data collected from 86 seismic stations of the Central Europe-Alpine region. The first single-event locations obtained using a uniform 1-D velocity model, and both fixed and free depths, showed residuals of the order of up ± 2.0 s, systematically affecting stations located in different areas of the study region. Namely, German stations to the northeast of the epicenters and French stations to the west exhibit negative residuals, while Italian stations located to the southeast are characterized by similarly large positive residuals. As a consequence, the epicentral coordinates were affected by a significant bias of the order of 4–5 km to the NNE. The locations were repeated applying a method that uses different velocity models for three groups of stations situated in different geological environments, obtaining more accurate locations. Moreover, the application of two methods of relative locations and joint hypocentral determination, without improving the absolute location of the master event, has shown that the sources of the four considered events are separated by distances of the order of one km both in horizontal coordinates and in depths. A particular attention has been paid to the geographical positions of the seismic stations used in the locations and their relationship with the known crustal features, such as the Moho depth and velocity anomalies in the studied region. Significant correlations between the observed travel time residuals and the crustal structure were obtained.


2019 ◽  
Vol 9 (1) ◽  
pp. 13-21
Author(s):  
Rezene Mahatsente

Abstract The Central Andes experienced major earthquake (Mw =8.2) in April 2014 in a region where the giant 1877 earthquake (Mw=8.8) occurred. The 2014 Iquique earthquake did not break the entire seismic gap zones as previously predicted. Geodetic and seismological observations indicate a highly coupled plate interface. To assess the locking mechanism of plate interfaces beneath Central Andes, a 2.5-D gravity model of the crust and upper mantle structure of the central segment of the subduction zone was developed based on terrestrial and satellite gravity data from the LAGEOS, GRACE and GOCE satellite missions. The densities and major structures of the gravity model are constrained by velocity models from receiver function and seismic tomography. The gravity model defined details of crustal and slab structure necessary to understand the cause of megathrust asperity generation. The densities of the upper and lower crust in the fore-arc (2970 – 3000 kg m−3) are much higher than the average density of continental crust. The high density bodies are interpreted as plutonic or ophiolitic structures emplaced onto continental crust. The plutonic or ophiolitic structures may be exerting pressure on the Nazca slab and lock the plate interfaces beneath the Central Andes subduction zone. Thus, normal pressure exerted by high density fore-arc structures and buoyancy force may control plate coupling in the Central Andes. However, this interpretation does not exclude other possible factors controlling plate coupling in the Central Andes. Seafloor roughness and variations in pore-fluid pressure in sediments along subduction channel can affect plate coupling and asperity generation.


2017 ◽  
Vol 44 (18) ◽  
pp. 9283-9292 ◽  
Author(s):  
Jorge Jara ◽  
Anne Socquet ◽  
David Marsan ◽  
Michel Bouchon

Author(s):  
S. M. Ariful Islam ◽  
Christine A. Powell ◽  
Martin C. Chapman

Abstract Three-dimensional P- and S-wave velocity (VP and VS) models are determined for the crust containing the main aftershock cluster of the 2011 Mineral, Virginia, earthquake using local earthquake tomography. The inversion uses a total of 5125 arrivals (2465 P- and 2660 S-wave arrivals) for 324 aftershocks recorded by 12 stations. The inversion volume (22 × 20 × 16 km) is completely contained within the Piedmont Chopawamsic metavolcanic terrane. The models are well resolved in the central portion of the inversion volume in the depth range 1–5 km; good resolution does not extend to the hypocenter depth of the mainshock. Most aftershocks are located within a northeast-trending, southeast-dipping region containing negative VP anomalies, positive VS anomalies, and VP/VS ratios as low as 1.53. These velocity results strongly argue for the presence of quartz-rich rocks, which we attribute to either the presence of a giant quartz vein system or metamorphosed orthoquarzite sandstones originally deposited on the Laurentian passive margin and subsequently incorporated into the Chopawamsic thrust sheets during island arc collision in the Taconic orogeny.


2004 ◽  
Vol 37 (2) ◽  
pp. 253-296 ◽  
Author(s):  
C Benetatos ◽  
A Kiratzi ◽  
C Papazachos ◽  
G Karakaisis

Sign in / Sign up

Export Citation Format

Share Document