scholarly journals Seabed video and still images from the northern Weddell Sea and the western flanks of the Powell Basin

2021 ◽  
Vol 13 (2) ◽  
pp. 609-615
Author(s):  
Autun Purser ◽  
Simon Dreutter ◽  
Huw Griffiths ◽  
Laura Hehemann ◽  
Kerstin Jerosch ◽  
...  

Abstract. Research vessels equipped with fibre optic and copper-cored coaxial cables support the live onboard inspection of high-bandwidth marine data in real time. This allows for towed still-image and video sleds to be equipped with latest-generation higher-resolution digital camera systems and additional sensors. During RV Polarstern expedition PS118 in February–April 2019, the recently developed Ocean Floor Observation and Bathymetry System (OFOBS) of the Alfred Wegener Institute was used to collect still-image and video data from the seafloor at a total of 11 predominantly ice-covered locations in the northern Weddell Sea and Powell Basin. Still images of 26-megapixel resolution and HD (high-definition) quality video data were recorded throughout each deployment. In addition to downward-facing video and still-image cameras, the OFOBS also mounted side-scanning and forward-facing acoustic systems, which facilitated safe deployment in areas of high topographic complexity, such as above the steep flanks of the Powell Basin and the rapidly shallowing, iceberg-scoured Nachtigaller Shoal. To localise collected data, the OFOBS system was equipped with a Posidonia transponder for ultra-short baseline triangulation of OFOBS positions. All images are available from: https://doi.org/10.1594/PANGAEA.911904 (Purser et al., 2020).

2020 ◽  
Author(s):  
Autun Purser ◽  
Simon Dreutter ◽  
Huw Griffiths ◽  
Laura Hehemann ◽  
Kerstin Jerosch ◽  
...  

Abstract. Research vessels equipped with fibreoptic and copper cored coaxial cables support the live onboard inspection of high-bandwidth marine data in real-time. This allows towed still image and video sleds to be equipped with latest generation higher resolution digital camera systems and additional sensors. During RV Polarstern expedition PS118 in February–April 2019, the recently developed Ocean Floor Observation and Bathymetry System (OFOBS) of the Alfred Wegener Institute was used to collect still and video image data from the seafloor at a total of 11 ice covered locations in the northern Weddell Sea and Powell Basin. Still images of 26 megapixel resolution and HD quality video data were recorded throughout each deployment. In addition to downward facing video and still image cameras, OFOBS also mounted sidescan and forward-facing acoustic systems, which facilitated safe deployment in areas of high topographic complexity, such as above the steep flanks of the Powell Basin and the rapidly shallowing, iceberg scoured Nachtigaller Shoal. To localise collected data, the OFOBS system was equipped with a POSIDONIA transponder for Ultra Short Baseline triangulation of OFOBS positions. All images are available from: https://doi.org/10.1594/PANGAEA.911904 (Purser et al., 2020).


2017 ◽  
Vol 24 (7) ◽  
pp. 453-459 ◽  
Author(s):  
Aaron C Moberly ◽  
Margaret Zhang ◽  
Lianbo Yu ◽  
Metin Gurcan ◽  
Caglar Senaras ◽  
...  

Introduction With the growing popularity of telemedicine and tele-diagnostics, clinical validation of new devices is essential. This study sought to investigate whether high-definition digital still images of the eardrum provide sufficient information to make a correct diagnosis, as compared with the gold standard view provided by clinical microscopy. Methods Twelve fellowship-trained ear physicians (neurotologists) reviewed the same set of 210 digital otoscope eardrum images. Participants diagnosed each image as normal or, if abnormal, they selected from seven types of ear pathology. Diagnostic percentage correct for each pathology was compared with a gold standard of diagnosis using clinical microscopy with adjunct audiometry and/or tympanometry. Participants also rated their degree of confidence for each diagnosis. Results Overall correctness of diagnosis for ear pathologies ranged from 48.6–100%, depending on the type of pathology. Neurotologists were 72% correct in identifying eardrums as normal. Reviewers’ confidence in diagnosis varied substantially among types of pathology, as well as among participants. Discussion High-definition digital still images of eardrums provided sufficient information for neurotologists to make correct diagnoses for some pathologies. However, some diagnoses, such as middle ear effusion, were more difficult to diagnose when based only on a still image. Levels of confidence of reviewers did not generally correlate with diagnostic ability.


2018 ◽  
Author(s):  
Richard Robert Suminski Jr ◽  
Gregory Dominick ◽  
Philip Sapanaro

BACKGROUND A considerable proportion of outdoor physical activity is done on sidewalk/streets. For example, we found that ~70% of adults who walked during the previous week used the sidewalks/streets around their homes. Interventions conducted at geographical levels (e.g., community) and studies examining relationships between environmental conditions (e.g., traffic) and walking/biking, necessitate a reliable measure of physical activities performed on sidewalks/streets. The Block Walk Method (BWM) is one of the more common approaches available for this purpose. Although it utilizes reliable observation techniques and displays criterion validity, it remains relatively unchanged since its introduction in 2006. It is a non-technical, labor-intensive, first generation method. Advancing the BWM would contribute significantly to our understanding of physical activity behavior. OBJECTIVE Therefore, the objective of the proposed study is to develop and test a new BWM that utilizes a wearable video device (WVD) and computer video analysis to assess physical activities performed on sidewalks/streets. The following aims will be completed to accomplish this objective. Aim 1: Improve the BWM by incorporating a WVD into the methodology. The WVD is a pair of eyeglasses with a high definition video camera embedded into the frames. We expect the WVD to be a viable option for improving the acquisition and accuracy of data collected using the BWM. Aim 2: Advance the WVD-enhanced BWM by applying machine learning and recognition software to automatically extract information on physical activities occurring on the sidewalks/streets from the videos. METHODS Trained observers (one wearing and one not wearing the WVD) will walk together at a set pace along predetermined, 1000 ft. sidewalk/street observation routes representing low, medium, and high walkable areas. During the walks, the non-WVD observer will use the traditional BWM to record the number of individuals standing/sitting, walking, biking, and running along the routes. The WVD observer will only record a video while walking. Later, two investigators will view the videos to determine the numbers of individuals performing physical activities along the routes. For aim 2, the video data will be analyzed automatically using multiple deep convolutional neural networks (CNNs) to determine the number of humans along an observation route as well as the type of physical activities being performed. Bland Altman methods and intraclass correlation coefficients will be used to assess agreement. Potential sources of error such as occlusions (e.g., trees) will be assessed using moderator analyses. RESULTS Outcomes from this study are pending; however, preliminary studies supporting the research protocol indicate that the BWM is reliable and the number of individuals were seen walking along routes are correlated with several environmental characteristics (e.g., traffic, sidewalk defects). Further, we have used CNNs to detect cars, bikes, and pedestrians as well as individuals using park facilities. CONCLUSIONS We expect the new approach will enhance measurement accuracy while reducing the burden of data collection. In the future, the capabilities of the WVD-CNNs system will be expanded to allow for the determination of other characteristics captured by the videos such as caloric expenditure and environmental conditions.


Author(s):  
Friedrich Knuth ◽  
Leila Belabassi ◽  
Lori Garzio ◽  
Michael Smith ◽  
Michael Vardaro ◽  
...  

Author(s):  
Brendan J. Russo ◽  
Emmanuel James ◽  
Cristopher Y. Aguilar ◽  
Edward J. Smaglik

In the past two decades, cell phone and smartphone use in the United States has increased substantially. Although mobile phones provide a convenient way for people to communicate, the distraction caused by the use of these devices has led to unintended traffic safety and operational consequences. Although it is well recognized that distracted driving is extremely dangerous for all road users (including pedestrians), the potential impacts of distracted walking have not been as comprehensively studied. Although practitioners should design facilities with the safety, efficiency, and comfort of pedestrians in mind, it is still important to investigate certain pedestrian behaviors at existing facilities to minimize the risk of pedestrian–vehicle crashes, and to reduce behaviors that may unnecessarily increase delay at signalized intersections. To gain new insights into factors associated with distracted walking, pedestrian violations, and walking speed, 3,038 pedestrians were observed across four signalized intersections in New York and Arizona using high-definition video cameras. The video data were reduced and summarized, and an ordinary least squares (OLS) regression model was estimated to analyze factors affecting walking speeds. In addition, binary logit models were estimated to analyze both pedestrian distraction and pedestrian violations. Ultimately, several site- and pedestrian-specific variables were found to be significantly associated with pedestrian distraction, violation behavior, and walking speeds. The results provide important information for researchers, practitioners, and legislators, and may be useful in planning strategies to reduce or mitigate the impacts of pedestrian behavior that may be considered unsafe or potentially inefficient.


Connectivity ◽  
2020 ◽  
Vol 148 (6) ◽  
Author(s):  
Yu. I. Katkov ◽  
◽  
O. S. Zvenigorodsky ◽  
O. V. Zinchenko ◽  
V. V. Onyshchenko ◽  
...  

The article is devoted to the topical issue of finding new effective and improving existing widespread compression methods in order to reduce computational complexity and improve the quality of image-renewable image compression images, is important for the introduction of cloud technologies. The article presents a problem To increase the efficiency of cloud storage, it is necessary to determine methods for reducing the information redundancy of digital images by fractal compression of video content, to make recommendations on the possibilities of applying these methods to solve various practical problems. The necessity of storing high-quality video information in new HDTV formats 2k, 4k, 8k in cloud storage to meet the existing needs of users has been substantiated. It is shown that when processing and transmitting high quality video information there is a problem of reducing the redundancy of video data (image compression) provided that the desired image quality is preserved, restored by the user. It has been shown that in cloud storage the emergence of such a problem is historically due to the contradiction between consumer requirements for image quality and the necessary volumes and ways to reduce redundancy of video data, which are transmitted over communication channels and processed in data center servers. The solution to this problem is traditionally rooted in the search for effective technologies for compressing, archiving and compressing video information. An analysis of video compression methods and digital video compression technology has been performed, which reduces the amount of data used to represent the video stream. Approaches to image compression in cloud storage under conditions of preservation or a slight reduction in the amount of data that provide the user with the specified quality of the restored image are shown. Classification of special compression methods without loss and with information loss is provided. Based on the analysis, it is concluded that it is advisable to use special methods of compression with loss of information to store high quality video information in the new formats HDTV 2k, 4k, 8k in cloud storage. The application of video image processing and their encoding and compression on the basis of fractal image compression is substantiated. Recommendations for the implementation of these methods are given.


Author(s):  
Le Quang Bon ◽  

The objective of this article is to identify current trends and prospects for the use of technical facilities and installations to prevent the spread of wildfires by analyzing the literature. The analysis of the literature has allowed an analysis of different ground-based wildfire detection and monitoring systems: optical sensors and digital camera systems, and wireless sensor network systems. The author concludes that the wireless sensor network can be seen as a partial solution when used in combination with other technologies. Keywords—observation towers, optical systems, optical sensors, digital cameras, wireless sensor network.


Author(s):  
M. Gerke ◽  
F. Nex ◽  
F. Remondino ◽  
K. Jacobsen ◽  
J. Kremer ◽  
...  

During the last decade the use of airborne multi camera systems increased significantly. The development in digital camera technology allows mounting several mid- or small-format cameras efficiently onto one platform and thus enables image capture under different angles. Those oblique images turn out to be interesting for a number of applications since lateral parts of elevated objects, like buildings or trees, are visible. However, occlusion or illumination differences might challenge image processing. From an image orientation point of view those multi-camera systems bring the advantage of a better ray intersection geometry compared to nadir-only image blocks. On the other hand, varying scale, occlusion and atmospheric influences which are difficult to model impose problems to the image matching and bundle adjustment tasks. In order to understand current limitations of image orientation approaches and the influence of different parameters such as image overlap or GCP distribution, a commonly available dataset was released. The originally captured data comprises of a state-of-the-art image block with very high overlap, but in the first stage of the so-called ISPRS/EUROSDR benchmark on multi-platform photogrammetry only a reduced set of images was released. In this paper some first results obtained with this dataset are presented. They refer to different aspects like tie point matching across the viewing directions, influence of the oblique images onto the bundle adjustment, the role of image overlap and GCP distribution. As far as the tie point matching is concerned we observed that matching of overlapping images pointing to the same cardinal direction, or between nadir and oblique views in general is quite successful. Due to the quite different perspective between images of different viewing directions the standard tie point matching, for instance based on interest points does not work well. How to address occlusion and ambiguities due to different views onto objects is clearly a non-solved research problem so far. In our experiments we also confirm that the obtainable height accuracy is better when all images are used in bundle block adjustment. This was also shown in other research before and is confirmed here. Not surprisingly, the large overlap of 80/80% provides much better object space accuracy – random errors seem to be about 2-3fold smaller compared to the 60/60% overlap. A comparison of different software approaches shows that newly emerged commercial packages, initially intended to work with small frame image blocks, do perform very well.


1998 ◽  
Vol 14 (03) ◽  
pp. 202-213
Author(s):  
Clifford J. Mugnier

A problem in modular shipbuilding is the lack of a reliable, low-cost method of obtaining and utilizing dimensional control in 3D. Photogrammetry has been successfully used as a tool for this application, but because of the large number of systematic errors associated with film-based cameras, only very large shipyards are using it. Recently, developments in Charge Coupled Device (CCD) imaging arrays for cameras have allowed some success in applying photogrammetric techniques dimensional control Mainstream photogrammetric software and hardware configurations have been expensive and complicated. Digital camera systems and computers were purchased and programmed to tie existing inexpensive software packages with Geometric Dilution of Control (GDOP) error propagation analysis, originally designed for topographic mapping, into a tool for production shipyard fabrication dimensional control.


Sign in / Sign up

Export Citation Format

Share Document