Evaluation of a cosmic-ray neutron sensor network  for improved land surface model prediction

Abstract. In situ soil moisture sensors provide highly accurate but very local soil moisture measurements, while remotely sensed soil moisture is strongly affected by vegetation and surface roughness. In contrast, cosmic-ray neutron sensors (CRNSs) allow highly accurate soil moisture estimation on the field scale which could be valuable to improve land surface model predictions. In this study, the potential of a network of CRNSs installed in the 2354 km2 Rur catchment (Germany) for estimating soil hydraulic parameters and improving soil moisture states was tested. Data measured by the CRNSs were assimilated with the local ensemble transform Kalman filter in the Community Land Model version 4.5. Data of four, eight and nine CRNSs were assimilated for the years 2011 and 2012 (with and without soil hydraulic parameter estimation), followed by a verification year 2013 without data assimilation. This was done using (i) a regional high-resolution soil map, (ii) the FAO soil map and (iii) an erroneous, biased soil map as input information for the simulations. For the regional soil map, soil moisture characterization was only improved in the assimilation period but not in the verification period. For the FAO soil map and the biased soil map, soil moisture predictions improved strongly to a root mean square error of 0.03 cm3 cm−3 for the assimilation period and 0.05 cm3 cm−3 for the evaluation period. Improvements were limited by the measurement error of CRNSs (0.03 cm3 cm−3). The positive results obtained with data assimilation of nine CRNSs were confirmed by the jackknife experiments with four and eight CRNSs used for assimilation. The results demonstrate that assimilated data of a CRNS network can improve the characterization of soil moisture content on the catchment scale by updating spatially distributed soil hydraulic parameters of a land surface model.

Download Full-text

Stone Content Influence on Land Surface Model Simulation of Soil Moisture and Evapotranspiration at Reynolds Creek Watershed

Journal of Hydrometeorology ◽

10.1175/jhm-d-19-0075.1 ◽

2020 ◽

Vol 21 (8) ◽

pp. 1889-1904

Author(s):

Kshitij Parajuli ◽

Scott B. Jones ◽

David G. Tarboton ◽

Lawrence E. Hipps ◽

Lin Zhao ◽

...

Keyword(s):

Soil Moisture ◽

Soil Profile ◽

Land Surface ◽

Model Simulation ◽

Land Surface Model ◽

Surface Model ◽

Hydraulic Parameters ◽

Reynolds Creek ◽

Soil Hydraulic Parameters ◽

Soil Hydraulic

AbstractConsiderable advancement in spatiotemporal resolution of remote sensing and ground-based measurements has enabled refinement of parameters used in land surface models for simulating surface water fluxes. However, land surface modeling capabilities are still inadequate for accurate representation of subsurface properties and processes, which continue to limit the accuracy of land surface model simulation. Our objective in this study was to examine the performance of the variously parameterized Noah land surface model with multiphysics option (Noah-MP) in simulating evapotranspiration (ET) and soil moisture dynamics in stony soils using verification from eddy covariance ET and in situ soil moisture data during the growing season of year 2015, obtained from the Lower Sheep subcatchment within the Reynolds Creek Experimental Watershed in southwestern Idaho. We evaluated the performance of Noah-MP considering four different scenarios with 1) a one-layer soil profile with Noah-MP default soil hydraulic parameters and three more five-layer soil profiles using 2) Noah-MP default soil hydraulic parameters; 3) soil hydraulic parameters derived from a pedotransfer function using field observations; and 4) hydraulic parameters from scenario 3, which also accounted for stone content in each layer. Each modeling experiment was forced with the same set of initial conditions, atmospheric input, and vegetation parameters. Our results indicate that enhanced representation of soil profile properties and stone content information noticeably improve the Noah-MP land surface model simulation of soil moisture content and evapotranspiration.

Download Full-text

Evaluation and improvement of the default soil hydraulic parameters for the Noah Land Surface Model

Geoderma ◽

10.1016/j.geoderma.2016.09.022 ◽

2017 ◽

Vol 285 ◽

pp. 247-259 ◽

Cited By ~ 20

Author(s):

Andrea Sz. Kishné ◽

Yohannes Tadesse Yimam ◽

Cristine L.S. Morgan ◽

Bright C. Dornblaser

Keyword(s):

Land Surface ◽

Land Surface Model ◽

Surface Model ◽

Hydraulic Parameters ◽

Soil Hydraulic Parameters ◽

Noah Land Surface Model ◽

Soil Hydraulic

Download Full-text

Improving estimates of UK soil moisture using the JULES land surface model with COSMOS-UK measurements in the LaVEnDAR data assimilation framework

10.5194/egusphere-egu2020-11566 ◽

2020 ◽

Author(s):

Elizabeth Cooper ◽

Ewan Pinnington ◽

Richard Ellis ◽

Eleanor Blyth ◽

Simon Dadson ◽

...

Keyword(s):

Soil Moisture ◽

Data Assimilation ◽

Soil Texture ◽

Land Surface ◽

Land Surface Model ◽

Cosmic Ray ◽

Surface Model ◽

Soil Physics ◽

Soil Moisture Sensors ◽

The Uk

Soil moisture predictions are increasingly important in hydrological, ecological and agricultural applications. In recent years the availability of wide-area assessments of current and future soil-moisture states has grown, yet few studies have combined model-based assessments with observations beyond the point scale. Here we use the JULES land surface model together with COSMOS-UK data to evaluate the extent to which data assimilation can improve predictions of soil moisture across the United Kingdom.COSMOS-UK is a network of soil moisture sensors run by UKCEH. The network provides soil moisture measurements at around 50 sites throughout the UK using innovative Cosmic Ray Neutron Sensors (CRNS). Half hourly measurements of the meteorological variables that the Joint UK Land Environment Simulator (JULES) requires as driving data are also recorded at COSMOS-UK sites, allowing us to run JULES at observation locations. This provides a unique opportunity to compare soil moisture outputs from JULES with CRNS observations; these measurements have a footprint of up to 12 ha (approx 30 acres) and are therefore better scale matched with JULES outputs than those from point sensors.We have used the Land Variational Ensemble Data Assimilation Framework (LaVEnDAR) to combine soil moisture estimates from JULES with daily CRNS observations from one year at a number of COSMOS-UK sites. We show that this results in improved soil moisture predictions from JULES over several years. This has been achieved by optimising parameters in the pedo-transfer function used to derive JULES soil physics parameters from soil texture information. Using data assimilation with LaVEnDAR in this way allows us to explore the relationships between soil moisture estimates, soil physics parameters and soil texture, as well as improving the agreement between JULES model outputs and observations.

Download Full-text

Improving soil moisture prediction of a high-resolution land surface model by parameterising pedotransfer functions through assimilation of SMAP satellite data

Hydrology and Earth System Sciences ◽

10.5194/hess-25-1617-2021 ◽

2021 ◽

Vol 25 (3) ◽

pp. 1617-1641

Author(s):

Ewan Pinnington ◽

Javier Amezcua ◽

Elizabeth Cooper ◽

Simon Dadson ◽

Rich Ellis ◽

...

Keyword(s):

Soil Moisture ◽

Data Assimilation ◽

Land Surface ◽

Mean Squared Error ◽

Land Surface Model ◽

Cosmic Ray ◽

Pedotransfer Functions ◽

Surface Model ◽

Squared Error ◽

Surface Models

Abstract. Pedotransfer functions are used to relate gridded databases of soil texture information to the soil hydraulic and thermal parameters of land surface models. The parameters within these pedotransfer functions are uncertain and calibrated through analyses of point soil samples. How these calibrations relate to the soil parameters at the spatial scale of modern land surface models is unclear because gridded databases of soil texture represent an area average. We present a novel approach for calibrating such pedotransfer functions to improve land surface model soil moisture prediction by using observations from the Soil Moisture Active Passive (SMAP) satellite mission within a data assimilation framework. Unlike traditional calibration procedures, data assimilation always takes into account the relative uncertainties given to both model and observed estimates to find a maximum likelihood estimate. After performing the calibration procedure, we find improved estimates of soil moisture and heat flux for the Joint UK Land Environment Simulator (JULES) land surface model (run at a 1 km resolution) when compared to estimates from a cosmic-ray soil moisture monitoring network (COSMOS-UK) and three flux tower sites. The spatial resolution of the COSMOS probes is much more representative of the 1 km model grid than traditional point-based soil moisture sensors. For 11 cosmic-ray neutron soil moisture probes located across the modelled domain, we find an average 22 % reduction in root mean squared error, a 16 % reduction in unbiased root mean squared error and a 16 % increase in correlation after using data assimilation techniques to retrieve new pedotransfer function parameters.

Download Full-text

Improving Soil Moisture Prediction of a High–Resolution Land Surface Model by Parameterising Pedotransfer Functions through Assimilation of SMAP Satellite Data

10.5194/hess-2020-303 ◽

2020 ◽

Author(s):

Ewan Pinnington ◽

Javier Amezcua ◽

Elizabeth Cooper ◽

Simon Dadson ◽

Rich Ellis ◽

...

Keyword(s):

Soil Moisture ◽

Data Assimilation ◽

Land Surface ◽

Mean Squared Error ◽

Land Surface Model ◽

Cosmic Ray ◽

Pedotransfer Functions ◽

Surface Model ◽

Squared Error ◽

Surface Models

Abstract. Pedotransfer functions are used to relate gridded databases of soil texture information to the soil hydraulic and thermal parameters of land surface models. The parameters within these pedotransfer functions are uncertain and calibrated through analyses of point soil samples. How these calibrations relate to the soil parameters at the spatial scale of modern land surface models is unclear, because gridded databases of soil texture represent an area average. We present a novel approach for calibrating such pedotransfer functions to improve land surface model soil moisture prediction by using observations from the Soil Moisture Active Passive (SMAP) satellite mission within a data assimilation framework. Unlike traditional calibration procedures data assimilation always takes into account the relative uncertainties given to both model and observed estimates to find a maximum likelihood estimate. After performing the calibration procedure we find improved estimates of soil moisture for the JULES land surface model (run at a 1 km resolution) when compared to estimates from a cosmic-ray soil moisture monitoring network (COSMOS-UK). The spatial resolution of these COSMOS probes is much more representative of the 1 km model grid than traditional point based soil moisture sensors. For 11 cosmic-ray neutron soil moisture probes located across the modelled domain we find an average 22 % reduction in root-mean squared error, a 16 % reduction in unbiased root-mean squared error and a 16 % increase in correlation after using data assimilation techniques to retrieve new pedotransfer function parameters.

Download Full-text

Coupling the Community Land Model 5.0 with the Parallel Data Assimilation Framework

10.5194/egusphere-egu21-11805 ◽

2021 ◽

Author(s):

Lukas Strebel ◽

Heye Bogena ◽

Harry Vereecken ◽

Harrie-Jan Hendricks Franssen

Keyword(s):

Data Assimilation ◽

Land Surface ◽

System Modeling ◽

Main Memory ◽

Surface Model ◽

Hydraulic Parameters ◽

Community Land Model ◽

Parallel Data ◽

Soil Hydraulic Parameters ◽

Soil Hydraulic

Land surface models are important tools to improve our understanding of interacting ecosystem processes, but their predictions are associated with uncertainties related to model forcings, parameters and process simplifications. As high-quality observations become more and more available, they can be used to constrain the uncertainty of land surface model predictions. In this study, we use data assimilation for the fusion of data into the Community Land Model 5.0 (CLM5). CLM5 simulates a broad variety of important land surface processes including moisture and energy partitioning, surface runoff, subsurface runoff, photosynthesis and carbon and nitrogen storage in vegetation and soil. Here, we focus on water movement in soils and related soil hydraulic parameters and assimilate in-situ soil moisture data into CLM5 to improve the estimate of model states and soil hydraulic parameters. To do this, we have coupled the Parallel Data Assimilation Framework (PDAF) with CLM5. This coupling is based on the online variant of PDAF, i.e., data assimilation occurs during simulation runtime in the main memory and not via input/output files. Online coupling requires modification of the model source code, but we aim to keep the modifications to the CLM5 code minimal so that maintenance of the ongoing CLM5 developments remains straightforward. To this end, our approach reuses the existing CLM5 ensemble mode with only necessary adjustments to connect the PDAF parallel communicators. Furthermore, we developed the coupling in the framework of the Terrestrial System Modeling Platform (TSMP). TSMP is a highly modular modeling system for the fully integrated soil-vegetation-atmosphere system. To illustrate the potential of this coupling, we use the ensemble Kalman Filter to perform simultaneous state and parameter updates in a forest headwater catchment.

Download Full-text

Using Cosmic-Ray Neutron Probes in Validating Satellite Soil Moisture Products and Land Surface Models

Water ◽

10.3390/w11071362 ◽

2019 ◽

Vol 11 (7) ◽

pp. 1362 ◽

Cited By ~ 2

Author(s):

Mustafa Berk Duygu ◽

Zuhal Akyürek

Keyword(s):

Soil Moisture ◽

Land Surface ◽

Land Surface Model ◽

Cosmic Ray ◽

Surface Model ◽

High Temporal Resolution ◽

Land Surface Models ◽

Statistical Measures ◽

Surface Models ◽

Global Land

Soil moisture content is one of the most important parameters of hydrological studies. Cosmic-ray neutron sensing is a promising proximal soil moisture sensing technique at intermediate scale and high temporal resolution. In this study, we validate satellite soil moisture products for the period of March 2015 and December 2018 by using several existing Cosmic Ray Neutron Probe (CRNP) stations of the COSMOS database and a CRNP station that was installed in the south part of Turkey in October 2016. Soil moisture values, which were inferred from the CRNP station in Turkey, are also validated using a time domain reflectometer (TDR) installed at the same location and soil water content values obtained from a land surface model (Noah LSM) at various depths (0.1 m, 0.3 m, 0.6 m and 1.0 m). The CRNP has a very good correlation with TDR where both measurements show consistent changes in soil moisture due to storm events. Satellite soil moisture products obtained from the Soil Moisture and Ocean Salinity (SMOS), the METOP-A/B Advanced Scatterometer (ASCAT), Soil Moisture Active Passive (SMAP), Advanced Microwave Scanning Radiometer 2 (AMSR2), Climate Change Initiative (CCI) and a global land surface model Global Land Data Assimilation System (GLDAS) are compared with the soil moisture values obtained from CRNP stations. Coefficient of determination ( r 2 ) and unbiased root mean square error (ubRMSE) are used as the statistical measures. Triple Collocation (TC) was also performed by considering soil moisture values obtained from different soil moisture products and the CRNPs. The validation results are mainly influenced by the location of the sensor and the soil moisture retrieval algorithm of satellite products. The SMAP surface product produces the highest correlations and lowest errors especially in semi-arid areas whereas the ASCAT product provides better results in vegetated areas. Both global and local land surface models’ outputs are highly compatible with the CRNP soil moisture values.

Download Full-text

SMOS Neural Network Soil Moisture Data Assimilation in a Land Surface Model and Atmospheric Impact

10.20944/preprints201904.0216.v1 ◽

2019 ◽

Author(s):

Nemesio Rodriguez-Fernandez ◽

Patricia de Rosnay ◽

Clement Albergel ◽

Philippe Richaume ◽

Filipe Aires ◽

...

Keyword(s):

Neural Network ◽

Soil Moisture ◽

Data Assimilation ◽

Land Surface ◽

Positive Impact ◽

Land Surface Model ◽

Surface Model ◽

Northern Asia ◽

The Impact

The assimilation of Soil Moisture and Ocean Salinity (SMOS) data into the ECMWF (European Centre for Medium Range Weather Forecasts) H-TESSEL (Hydrology revised - Tiled ECMWF Scheme for Surface Exchanges over Land) model is presented. SMOS soil moisture (SM) estimates have been produced specifically by training a neural network with SMOS brightness temperatures as input and H-TESSEL model SM simulations as reference. This can help the assimilation of SMOS information in several ways: (1) the neural network soil moisture (NNSM) data have a similar climatology to the model, (2) no global bias is present with respect to the model even if regional differences can exist. Experiments performing joint data assimilation (DA) of NNSM, 2 metre air temperature and relative humidity or NNSM-only DA are discussed. The resulting SM was evaluated against a large number of in situ measurements of SM obtaining similar results to those of the model with no assimilation, even if significant differences were found from site to site. In addition, atmospheric forecasts initialized with H-TESSEL runs (without DA) or with the analysed SM were compared to measure of the impact of the satellite information. Although, NNSM DA has an overall neutral impact in the forecast in the Tropics, a significant positive impact was found in other areas and periods, especially in regions with limited in situ information. The joint NNSM, T2m and RH2m DA improves the forecast for all the seasons in the Southern Hemisphere. The impact is mostly due to T2m and RH2m, but SMOS NN DA alone also improves the forecast in July- September. In the Northern Hemisphere, the joint NNSM, T2m and RH2m DA improves the forecast in April-September, while NNSM alone has a significant positive effect in July-September. Furthermore, forecasting skill maps show that SMOS NNSM improves the forecast in North America and in Northern Asia for up to 72 hours lead time.

Download Full-text

Impact of Incorrect Model Error Assumptions on the Sequential Assimilation of Remotely Sensed Surface Soil Moisture

Journal of Hydrometeorology ◽

10.1175/jhm499.1 ◽

2006 ◽

Vol 7 (3) ◽

pp. 421-432 ◽

Cited By ~ 103

Author(s):

Wade T. Crow ◽

Emiel Van Loon

Keyword(s):

Soil Moisture ◽

Data Assimilation ◽

Land Surface ◽

Surface Soil ◽

Random Noise ◽

Land Surface Model ◽

Model Error ◽

Surface Model ◽

Surface Soil Moisture ◽

Incorrect Model

Abstract Data assimilation approaches require some type of state forecast error covariance information in order to optimally merge model predictions with observations. The ensemble Kalman filter (EnKF) dynamically derives such information through a Monte Carlo approach and the introduction of random noise in model states, fluxes, and/or forcing data. However, in land data assimilation, relatively little guidance exists concerning strategies for selecting the appropriate magnitude and/or type of introduced model noise. In addition, little is known about the sensitivity of filter prediction accuracy to (potentially) inappropriate assumptions concerning the source and magnitude of modeling error. Using a series of synthetic identical twin experiments, this analysis explores the consequences of making incorrect assumptions concerning the source and magnitude of model error on the efficiency of assimilating surface soil moisture observations to constrain deeper root-zone soil moisture predictions made by a land surface model. Results suggest that inappropriate model error assumptions can lead to circumstances in which the assimilation of surface soil moisture observations actually degrades the performance of a land surface model (relative to open-loop assimilations that lack a data assimilation component). Prospects for diagnosing such circumstances and adaptively correcting the culpable model error assumptions using filter innovations are discussed. The dual assimilation of both runoff (from streamflow) and surface soil moisture observations appears to offer a more robust assimilation framework where incorrect model error assumptions are more readily diagnosed via filter innovations.

Download Full-text

The effect of satellite-derived surface soil moisture and leaf area index land data assimilation on streamflow simulations over France

Hydrology and Earth System Sciences ◽

10.5194/hess-21-2015-2017 ◽

2017 ◽

Vol 21 (4) ◽

pp. 2015-2033 ◽

Cited By ~ 14

Author(s):

David Fairbairn ◽

Alina Lavinia Barbu ◽

Adrien Napoly ◽

Clément Albergel ◽

Jean-François Mahfouf ◽

...

Keyword(s):

Soil Moisture ◽

Data Assimilation ◽

Leaf Area Index ◽

Land Surface ◽

River Discharge ◽

Surface Soil ◽

Land Surface Model ◽

Surface Model ◽

Surface Soil Moisture ◽

Area Index

Abstract. This study evaluates the impact of assimilating surface soil moisture (SSM) and leaf area index (LAI) observations into a land surface model using the SAFRAN–ISBA–MODCOU (SIM) hydrological suite. SIM consists of three stages: (1) an atmospheric reanalysis (SAFRAN) over France, which forces (2) the three-layer ISBA land surface model, which then provides drainage and runoff inputs to (3) the MODCOU hydro-geological model. The drainage and runoff outputs from ISBA are validated by comparing the simulated river discharge from MODCOU with over 500 river-gauge observations over France and with a subset of stations with low-anthropogenic influence, over several years. This study makes use of the A-gs version of ISBA that allows for physiological processes. The atmospheric forcing for the ISBA-A-gs model underestimates direct shortwave and long-wave radiation by approximately 5 % averaged over France. The ISBA-A-gs model also substantially underestimates the grassland LAI compared with satellite retrievals during winter dormancy. These differences result in an underestimation (overestimation) of evapotranspiration (drainage and runoff). The excess runoff flowing into the rivers and aquifers contributes to an overestimation of the SIM river discharge. Two experiments attempted to resolve these problems: (i) a correction of the minimum LAI model parameter for grasslands and (ii) a bias-correction of the model radiative forcing. Two data assimilation experiments were also performed, which are designed to correct random errors in the initial conditions: (iii) the assimilation of LAI observations and (iv) the assimilation of SSM and LAI observations. The data assimilation for (iii) and (iv) was done with a simplified extended Kalman filter (SEKF), which uses finite differences in the observation operator Jacobians to relate the observations to the model variables. Experiments (i) and (ii) improved the median SIM Nash scores by about 9 % and 18 % respectively. Experiment (iii) reduced the LAI phase errors in ISBA-A-gs but had little impact on the discharge Nash efficiency of SIM. In contrast, experiment (iv) resulted in spurious increases in drainage and runoff, which degraded the median discharge Nash efficiency by about 7 %. The poor performance of the SEKF originates from the observation operator Jacobians. These Jacobians are dampened when the soil is saturated and when the vegetation is dormant, which leads to positive biases in drainage and/or runoff and to insufficient corrections during winter, respectively. Possible ways to improve the model are discussed, including a new multi-layer diffusion model and a more realistic response of photosynthesis to temperature in mountainous regions. The data assimilation should be advanced by accounting for model and forcing uncertainties.

Download Full-text