scholarly journals DOCUMENTATION, ANALYSIS AND REPRESENTATION OF MODERNIST HERITAGE THROUGH BUILDING INFORMATION MODELING

Author(s):  
F. Maietti ◽  
A. Zattini

<p><strong>Abstract.</strong> The paper is focused on research activities on documentation, analysis and representation of Modernist Heritage in Latin America. The research is part of a broad project developed by the Department of Architecture of the University of Ferrara following the main aim of documentation for knowledge, enhancement and preservation of cultural heritage. In addition to several on site projects developed in cooperation with local institutions, mainly in Brazil, and based on historical analysis, documentation, survey, modelling and diagnostic assessment, the research has then opened up to an in-depth study of Modernist architecture. The field of investigation has been extended to Latin America, through the analysis of the main architectures of the iconic figures of Modernism, in order to collect a database of models as support for different research avenues. The methodological process is based on the “survey of the project”, an analysis of documentation as the starting point for the representation in BIM environment from which to extract conventional representations and different levels of interpretation.</p>

10.29007/k8c7 ◽  
2020 ◽  
Author(s):  
Luciana Debs ◽  
Sara Gusmao Brissi

Recent improvements in the AEC industry, such as Building Information Modeling (BIM) and lean construction and sustainability, require that the design and construction process be approached from a holistic and collaborative manner. From an academic perspective, collaboration also is an important teaching and research component that allows for a well-rounded understanding of the AEC industry. However, very little research has been performed on collaboration in the AEC disciplines, specifically interdisciplinary collaboration. As a starting point, this paper focuses on academic collaboration in journal publications related to sustainability and building performance. The authors provide bibliometric and thematic analyses of three 2018 research publications related to building performance and written by faculty affiliated with construction departments. The main goal of the paper is to provide preliminary findings about which AEC disciplines were included and which themes were prevalent in collaborative publications. Preliminary findings indicated themes related to performance analysis of buildings and / or building components; indoor environmental quality; decision-making and evaluation methods; and life cycle assessment. Results can be used to identify potential areas that are conducive to collaborative work between construction and other AEC disciplines in order to stimulate more interdisciplinary collaboration within AEC research.


Author(s):  
Idalina Bezerra Ferreira ◽  
Antonio Gonçalves de Farias Júnior

Known as the house of Zé Pereira, the house n° 243, located in the town of Princesa Isabel, became a property listed by the Institute of Historical and Artistic Heritage of the State of Paraíba - IPHAEP in the year 2005, the starting point for the actions to preserve material and immaterial heritage of its history. In the face of a copy of the residential architecture of the republican period of the early twentieth century, this article aims to describe the methods used in the documentation of architectural building. The first step to safeguard the records of time there was to verify which methods could be associated to the architectural survey in loco and they were the following: measuring per pathway, the triangulation and the trilateration that have low cost application, in addition to easy implementation. In order to scan the information gathered the technology Computer Aided Design - CAD and Building Information Modeling – BIM were used, to store information and 3D reconstructions of the building in separate steps. This article has emerged as an academic extension and was finalized as a final term paper of the Technical course on Constructions in the year 2016. Results showed not only possibilities for accurate documentation of architectural features, but also some limitations depending on the stage of the survey.


Author(s):  
G. Patrucco ◽  
F. Chiabrando ◽  
A. Dameri ◽  
L. Teppati Losè

Abstract. In the framework of restoration operations, valuable assistance can be supplied from innovative techniques and methods developed in the field of Geomatics. Over the years, this continuous collaboration has produced synergistic and interdisciplinary results that have been successfully contributing to heritage conservation and valorisation. In the case of the current research, thorough multisensory investigations have been performed in order to provide a deeper knowledge of the Green Room of the Valentino Castle in Turin and to support the planning of the future restoration works that will involve this valuable asset. In the framework of this experience, four LiDAR systems have been employed in order to evaluate the different results obtainable from the sensors. Additionally, a complete photogrammetric close-range survey has been carried out, and some tests were completed using a hyperspectral camera. The workflow followed during the current research is described in this paper, and a comparison between the obtained outputs is proposed, focusing on the characteristics of these metric products, useful and sometimes necessary in the framework of the restoration project. Besides, some considerations on the advantages and the issues connected with the use of these reality-based data as a starting point for HBIM (Heritage Building Information Modeling) model generation are proposed, along with some observations about the potentialities of a photogrammetric co-registration approach using spectrum technologies for deterioration/decay detection and monitoring of heritage.


Author(s):  
Ghanim A. Bekr

This study involves with Building Information Modeling (BIM) and exploring the reasons behind the slow speed of implementing this method in the construction industry in developing countries in general and Jordan in specific. The aim of the research was achieved through a survey which considered 15 barrier factors and 13 driving factors. The study revealed that the level of BIM implementation in construction projects is generally low. In addition, the significant barriers affecting the adoption of BIM are lack of qualified staff to operate the software, difficulty learning BIM, the existing system fulfils the need, resistance to change and uncertainties concerning return on investment of BIM. Also, the study pointed out the most important factors that could help implementing BIM in the Jordanian construction industry. These are providing BIM training program, introducing BIM in the university curriculum and providing the efforts by the government to push implementation of BIM in their projects. Finally, the paper presented some recommendations if followed the level of (BIM) implementation in this country may be improved.


2019 ◽  
Vol 9 (19) ◽  
pp. 4006 ◽  
Author(s):  
Francisco Zamora-Polo ◽  
Mercedes Martínez Sánchez-Cortés ◽  
Antonio Manuel Reyes-Rodríguez ◽  
Justo García Sanz-Calcedo

The emergence of building information modeling (BIM) methodology requires the training of professionals with both specific and transversal skills. In this paper, a project-based learning experience carried out in the context of a project management course at the University of Extremadura is analyzed. To that end, a questionnaire was designed and given to students who participated in the initiative. Results suggest that BIM can be considered a virtual learning environment, from which students value the competences developed. The emotional performance observed was quite flat. Similarly, students valued the usefulness of the initiative. Students expressed a desire for the methodological change of the university classes, and thought that BIM methodology could be useful for other courses. The results obtained show a line of work to be done to improve the training of students and university teaching.


2014 ◽  
Vol 548-549 ◽  
pp. 1758-1762
Author(s):  
Yan Feng Li ◽  
Hui Chen Wang ◽  
Meng Zhao ◽  
Wen Yu Pan

Based on current status of village buildings as a starting point, combination of BIM technology with the design the green village buildings is discussed. By using software to simulate the concrete village building energy consumption, application effect of BIM technology is verified. Result shows that BIM (Building Information Modeling) technology not only help to make the building satisfying the green standards, saving energy by 32% than the other village buildings in the region , but also makes the time period percentage of building satisfying the requirement of minimum illumination that relying on natural lighting alone as much as 92.6%. It is helpful to energy saving, environmental protection, reduction of construction cost, and would become an important platform for planning and construction of green village buildings.


Author(s):  
Aaron Costin ◽  
Hanjin Hu ◽  
Ronald Medlock

The recent push to adopt building information modeling (BIM) for bridges and structures in the transportation industry has encountered major barriers owing to the lack of standardization. Unlike the building industry that has the National BIM Standard®–United States (NBIMS-US™) as a formal open platform standard and guide for the development of interoperable BIM software, the transportation industry does not currently have a similar open platform standard to enable the creation of interoperable BIM software to serve the needs of transportation stakeholders. The purpose of this paper is to present the findings of the research for one of the first use cases and development of data exchange requirements and model view definitions in adopting the open platform NBIMS-US applied to bridges and structures for the U.S. transportation industry. A subcommittee of the American Association of State Highway and Transportation Officials and the National Steel Bridge Alliance Steel Bridge Collaboration was formed to conduct a pilot study into the creation of information delivery manuals (IDMs) for steel bridges. This study served as pilot for the development of future IDMs in the transportation industry. As a result, the current IDM for Steel Bridge Detailing and Fabrication serves as the starting point of TPF-5(372) BIM for Bridges and Structures development of the Design to Fabrication model view definition. Finally, this study provided the outcomes and recommendations needed to expedite the development of IDMs for other use cases in the bridge and transportation industry.


Author(s):  
B. Godager

<p><strong>Abstract.</strong> The AEC–FM industry (Architecture/Engineering/Construction and Facilities Management) is increasingly using different building information modeling (BIM) methodology to solve complex challenges. With help of Semantic WEB technology, product data models and other relevant information are increasingly linked to BIM models. The article discusses the challenges of existing BIM standards to meet future requirements, to fully utilize semantic technology. The article provides suggestions for further research, and it specifically calls for a more strategic research that can look a bit longer than just the challenges associated with various limited case projects. The article discusses whether existing BIM formats are able to meet future requirements, where the potential in the construction industry to fully utilize semantic web technology is difficult with today's BIM standards. Furthermore, it is suggested that previously developed SW resources should be gathered, then earlier initiatives are easier to find, use and build upon. The literature study shows many initiatives spread across many domains in the AEC-FM area. Most studied articles have a high degree of technological focus, where the semantic web opportunities are tested in a chosen case.The findings of this study can be used as a starting point for further strategic research and development.</p>


Author(s):  
Maryna Rysiaieva

The paper looks at the ancient Greek thymiateria and aims at finding data in literary, epigraphic and visual sources that would cast light on the use of thymiateria in private and public rituals of the VIІ th century BC – IVth century AD. Systematic collection of data and its comparative historical analysis were in the core of the methodology. Among the main methods of analysing the collected sources, one should mention empirical, analytical, structural-typological and iconographical methods. A thymiaterion (an incense burner) is firstly mentioned in the Vth century BC in Herodotus’ Historia. In centuries to come, the panhellenic name of thymiaterion would dominate and enter to Roman and Germanic languages. This device was used solely with fire, charcoal or heated pebbles to burn aromatic compounds, incense and aromatic plants and flowers in particular. Thymiateria didn’t have any fixed shapes or sizes. In narrative sources, they were also named bomiskos, libanotis (libanotris), escharis, tripodiskos etc. In this paper, I examine the basic constructive elements of thymiateria. As visual sources and lyric poetry suggest, they were used in the archaic period. The earliest instance of the use of thymiateria in the ritual practice date late to the VIth century BC in the Phanagoria of the Bosporus. The thymiateria is depicted on mostly in mythological scenes on the Athenian red-figure pottery late of the Vth – IVth centuries BC found in Panticapaeum and in the surrounding area. The Greek iconography of mythological scenes on the vases was clear for the locals. The majority of visual, numismatics and epigraphic sources that reveal the use of thymiateria on the Bosporus are dating to the IVth–ІІth centuries BC, when they were spread in Hellenistic Greece and, especially in sanctuaries of Delos. Although aroma was an essential part of thymiateria culture, only Orphic Hymns cast light on the use of particular incenses (in pure form or in compound) for each gods or heroes. One important question persists: which aromas were burnt in thymiateria and from which countries were they brought to Greece? From literary sources, we know that plant-based aromas, namely incense and myrrh were brought from South Arabia and Syria. Thymiateria were used during rituals in sanctuaries and temples, during religious processions, funerals, symposiums and wedding that were accompanied by aromatic smoke. The present essay should be regarded as a starting point for the further in-depth study of thymiateria from the Northern Black sea region and Olbia in particular.


Sign in / Sign up

Export Citation Format

Share Document