scholarly journals OPTMIZATION OF BIO-OPTICAL MODEL PARAMETERS FOR TURBID LAKE WATER QUALITY ESTIMATION USING LANDSAT 8 AND WASI-2D

2020 ◽  
Vol XLII-3/W11 ◽  
pp. 67-72
Author(s):  
A. Manuel ◽  
A. C. Blanco ◽  
A. M. Tamondong ◽  
R. Jalbuena ◽  
O. Cabrera ◽  
...  
Keyword(s):  
Water Quality ◽  
Chlorophyll A ◽  
The Philippines ◽  
Quality Data ◽  
Model Parameters ◽  
Landsat 8 ◽  
Water Quality Data ◽  
Chlorophyll A Concentration ◽  
In Situ Data

Abstract. Laguna Lake, the Philippines’ largest freshwater lake, has always been historically, economically, and ecologically significant to the people living near it. However, as it lies at the center of urban development in Metro Manila, it suffers from water quality degradation. Water quality sampling by current field methods is not enough to assess the spatial and temporal variations of water quality in the lake. Regular water quality monitoring is advised, and remote sensing addresses the need for a synchronized and frequent observation and provides an efficient way to obtain bio-optical water quality parameters. Optimization of bio-optical models is done as local parameters change regionally and seasonally, thus requiring calibration. Field spectral measurements and in-situ water quality data taken during simultaneous satellite overpass were used to calibrate the bio-optical modelling tool WASI-2D to get estimates of chlorophyll-a concentration from the corresponding Landsat-8 images. The initial output values for chlorophyll-a concentration, which ranges from 10–40 μg/L, has an RMSE of up to 10 μg/L when compared with in situ data. Further refinements in the initial and constant parameters of the model resulted in an improved chlorophyll-a concentration retrieval from the Landsat-8 images. The outputs provided a chlorophyll-a concentration range from 5–12 μg/L, well within the usual range of measured values in the lake, with an RMSE of 2.28 μg/L compared to in situ data.

scholarly journals ESTIMATION OF CHLOROPHYLL-A CONCENTRATION IN SAMPALOC LAKE USING UAS MULTISPECTRAL REMOTE SENSING AND REGRESSION ANALYSIS

2019 ◽  
Vol XLII-4/W19 ◽  
pp. 297-303
Author(s):  
R. M. G. Maravilla ◽  
J. P. Quinalayo ◽  
A. C. Blanco ◽  
C. G. Candido ◽  
E. V. Gubatanga ◽  
...  
Keyword(s):  
Water Quality ◽  
Regression Analysis ◽  
Chlorophyll A ◽  
Linear Regression Analysis ◽  
Quality Data ◽  
Water Quality Data ◽  
Microalgal Biomass ◽  
Chlorophyll A Concentration ◽  
Chl A

Abstract. Sampaloc Lake is providing livelihood for the residents through aquaculture. An increase in the quantity of fish pens inside the lake threatens its water quality condition. One parameter being monitored is microalgal biomass by measuring Chlorophyll-a concentration. This study aims to generate a chlorophyll-a concentration model for easier monitoring of the lake. In-situ water quality data were collected using chl-a data logger and water quality meter at 357 and 12 locations, respectively. Using Parrot Sequoia+ Multispectral Camera, 1496 of 2148 images were acquired and calibrated, producing 18x18cm resolution Green (G), Red(R), Red Edge (RE) and Near Infrared (NIR) reflectance images. NIR was used to mask out non-water features, and to correct sun glint. The in-situ data and the pixel values extracted were used for Simple Linear Regression Analysis. A model with 5 variables – R/NIR, RE2, NIR2, R/NIR2, and NIR/RE2, was generated, yielding an R2 of 0.586 and RMSE of 0.958 μg/l. A chlorophyll-a concentration map was produced, showing that chl-a is higher where fish pens are located and lowers as it moves away from the pens. Although there are apparent fish pens on certain areas of the lake, it still yields low chlorophyll-a because of little amount of residential area or establishments adjacent to it. Also, not all fish pens have the same concentration of Chlorophyll-a due to inconsistent population per fish pen. The center of the lake has low chlorophyll-a as it is far from human activities. The only outlet, Sabang Creek, also indicates high concentration of Chlorophyll-a.

Generation of geolocated and radiometrically corrected true reflectance surfaces in the visible portion of the electromagnetic spectrum over large bodies of water using images from a sUAS

2020 ◽  
Vol 8 (3) ◽  
pp. 172-185
Author(s):  
Juan G. Arango ◽  
Brandon K. Holzbauer-Schweitzer ◽  
Robert W. Nairn ◽  
Robert C. Knox
Keyword(s):  
Water Quality ◽  
Near Infrared ◽  
Quality Parameters ◽  
Water Quality Parameters ◽  
Quality Data ◽  
Electromagnetic Spectrum ◽  
Water Quality Data ◽  
Ground Control Points ◽  
Bodies Of Water

The focus of this study was to develop true reflectance surfaces in the visible portion of the electromagnetic spectrum from small unmanned aerial system (sUAS) images obtained over large bodies of water when no ground control points were available. The goal of the research was to produce true reflectance surfaces from which reflectance values could be extracted and used to estimate optical water quality parameters utilizing limited in-situ water quality analyses. Multispectral imagery was collected using a sUAS equipped with a multispectral sensor, capable of obtaining information in the blue (0.475 μm), green (0.560 μm), red (0.668 μm), red edge (0.717 μm), and near infrared (0.840 μm) portions of the electromagnetic spectrum. To develop a reliable and repeatable protocol, a five-step methodology was implemented: (i) image and water quality data collection, (ii) image processing, (iii) reflectance extraction, (iv) statistical interpolation, and (v) data validation. Results indicate that the created protocol generates geolocated and radiometrically corrected true reflectance surfaces from sUAS missions flown over large bodies of water. Subsequently, relationships between true reflectance values and in-situ water quality parameters were developed.

scholarly journals Assessing the potential of integrating Landsat sensors for estimating chlorophyll-a concentration in a reservoir

2017 ◽  
Vol 49 (5) ◽  
pp. 1608-1617 ◽  
Author(s):  
Matias Bonansea ◽  
Claudia Rodriguez ◽  
Lucio Pinotti
Keyword(s):  
Water Quality ◽  
Chlorophyll A ◽  
Landsat Imagery ◽  
Quality Parameters ◽  
Landsat 8 ◽  
Chlorophyll A Concentration ◽  
Chl A ◽  
Sensing Applications ◽  
Wide Range ◽  
Quality Assessments

Abstract Landsat satellites, 5 and 7, have significant potential for estimating several water quality parameters, but to our knowledge, there are few investigations which integrate these earlier sensors with the newest and improved mission of Landsat 8 satellite. Thus, the comparability of water quality assessing across different Landsat sensors needs to be evaluated. The main objective of this study was to assess the feasibility of integrating Landsat sensors to estimate chlorophyll-a concentration (Chl-a) in Río Tercero reservoir (Argentina). A general model to retrieve Chl-a was developed (R2 = 0.88). Using observed versus predicted Chl-a values the model was validated (R2 = 0.89) and applied to Landsat imagery obtaining spatial representations of Chl-a in the reservoir. Results showed that Landsat 8 can be combined with Landsat 5 and 7 to construct an empirical model to estimate water quality characteristics, such as Chl-a in a reservoir. As the number of available and upcoming sensors with open access will increase with time, we expect that this trend will certainly further promote remote sensing applications and serve as a valuable basis for a wide range of water quality assessments.

Forecasting Model Based on SAGA and LS-SVM for the Water Quality of Poyang Lake

2011 ◽  
Vol 347-353 ◽  
pp. 781-785
Author(s):  
Qun Cao ◽  
Bing Xiang Liu ◽  
Xiang Chen
Keyword(s):  
Water Quality ◽  
Poyang Lake ◽  
Quality Data ◽  
Support Vector ◽  
Forecasting Model ◽  
Model Parameters ◽  
Water Quality Data ◽  
Model Based ◽  
Simulated Annealing Genetic Algorithm

According to the nonlinearity and uncertainty of the water quality data samples, a forecasting model based on Simulated Annealing Genetic Algorithm(SAGA)and least squares support vector machines(LS-SVM) is proposed. Through adaptively optimizing the model parameters of LS-SVM by SAGA, we can apply the model to forecast water quality of Poyang Lake. The experimental results indicate that compared to the typical LS-SVM,the model is very practical and with higher precision.

scholarly journals Modelling lake trophic state: A random forest approach

2015 ◽  
Author(s):  
Jeffrey W Hollister ◽  
W. Bryan Milstead ◽  
Betty J. Kreakie
Keyword(s):  
Water Quality ◽  
Random Forests ◽  
Trophic State ◽  
Mean Squared Error ◽  
Quality Data ◽  
Full Model ◽  
Water Quality Data ◽  
Squared Error ◽  
The Mean

Productivity of lentic ecosystems is well studied and it is widely accepted that as nutrient inputs increase, productivity increases and lakes transition from lower trophic state (e.g. oligotrophic) to higher trophic states (e.g. eutrophic). These broad trophic state classifications are good predictors of ecosystem condition, services, and disservices (e.g. recreation, aesthetics, and harmful algal blooms). While the relationship between nutrients and trophic state provides reliable predictions, it requires in situ water quality data in order to parameterize the model. This limits the application of these models to lakes with existing and, more importantly, available water quality data. To address this, we take advantage of the availability of a large national lakes water quality database (i.e. the National Lakes Assessment), land use/land cover data, lake morphometry data, other universally available data, and apply data mining approaches to predict trophic state. Using this data and random forests, we first model chlorophyll a, then classify the resultant predictions into trophic states. The full model estimates chlorophyll a with both in situ and universally available data. The mean squared error and adjusted R2 of this model was 0.09 and 0.8, respectively. The second model uses universally available GIS data only. The mean squared error was 0.22 and the adjusted R2 was 0.48. The accuracy of the trophic state classifications derived from the chlorophyll a predictions were 69% for the full model and 49% for the “GIS only” model. Random forests extend the usefulness of the class predictions by providing prediction probabilities for each lake. This allows us to make trophic state predictions and also indicate the level of uncertainity around those predictions. For the full model, these predicted class probabilites ranged from 0.42 to 1. For the GIS only model, they ranged from 0.33 to 0.96. It is our conclusion that in situ data are required for better predictions, yet GIS and universally available data provide trophic state predictions, with estimated uncertainty, that still have the potential for a broad array of applications. The source code and data for this manuscript are available from https://github.com/USEPA/LakeTrophicModelling.

scholarly journals On the value of water quality data and informative flow states in karst modelling

2017 ◽  
Vol 21 (12) ◽  
pp. 5971-5985 ◽  
Author(s):  
Andreas Hartmann ◽  
Juan Antonio Barberá ◽  
Bartolomé Andreo
Keyword(s):  
Water Quality ◽  
Water Resource ◽  
Quality Data ◽  
Model Parameters ◽  
Flow State ◽  
Saturated Flow ◽  
Water Quality Data ◽  
Model Parameter ◽  
Time Period ◽  
Flow States

Abstract. If properly applied, karst hydrological models are a valuable tool for karst water resource management. If they are able to reproduce the relevant flow and storage processes of a karst system, they can be used for prediction of water resource availability when climate or land use are expected to change. A common challenge to apply karst simulation models is the limited availability of observations to identify their model parameters. In this study, we quantify the value of information when water quality data (NO3− and SO42−) is used in addition to discharge observations to estimate the parameters of a process-based karst simulation model at a test site in southern Spain. We use a three-step procedure to (1) confine an initial sample of 500 000 model parameter sets by discharge and water quality observations, (2) identify alterations of model parameter distributions through the confinement, and (3) quantify the strength of the confinement for the model parameters. We repeat this procedure for flow states, for which the system discharge is controlled by the unsaturated zone, the saturated zone, and the entire time period including times when the spring is influenced by a nearby river. Our results indicate that NO3− provides the most information to identify the model parameters controlling soil and epikarst dynamics during the unsaturated flow state. During the saturated flow state, SO42− and discharge observations provide the best information to identify the model parameters related to groundwater processes. We found reduced parameter identifiability when the entire time period is used as the river influence disturbs parameter estimation. We finally show that most reliable simulations are obtained when a combination of discharge and water quality date is used for the combined unsaturated and saturated flow states.

scholarly journals Predicting sediment and nutrient concentrations from high-frequency water-quality data

2019 ◽  
Author(s):  
Catherine Leigh ◽  
Sevvandi Kandanaarachchi ◽  
James M. McGree ◽  
Rob J. Hyndman ◽  
Omar Alsibai ◽  
...  
Keyword(s):  
Water Quality ◽  
High Frequency ◽  
Water Quality Monitoring ◽  
Quality Monitoring ◽  
Quality Data ◽  
Water Quality Data ◽  
Quality Reporting ◽  
River Level ◽  
Manual Sampling

AbstractWater-quality monitoring in rivers often focuses on the concentrations of sediments and nutrients, constituents that can smother biota and cause eutrophication. However, the physical and economic constraints of manual sampling prohibit data collection at the frequency required to adequately capture the variation in concentrations through time. Here, we developed models to predict total suspended solids (TSS) and oxidized nitrogen (NOx) concentrations based on high-frequency time series of turbidity, conductivity and river level data from in situ sensors in rivers flowing into the Great Barrier Reef lagoon. We fit generalized-linear mixed-effects models with continuous first-order autoregressive correlation structures to water-quality data collected by manual sampling at two freshwater sites and one estuarine site and used the fitted models to predict TSS and NOx from the in situ sensor data. These models described the temporal autocorrelation in the data and handled observations collected at irregular frequencies, characteristics typical of water-quality monitoring data. Turbidity proved a useful and generalizable surrogate of TSS, with high predictive ability in the estuarine and fresh water sites. Turbidity, conductivity and river level served as combined surrogates of NOx. However, the relationship between NOx and the covariates was more complex than that between TSS and turbidity, and consequently the ability to predict NOx was lower and less generalizable across sites than for TSS. Furthermore, prediction intervals tended to increase during events, for both TSS and NOx models, highlighting the need to include measures of uncertainty routinely in water-quality reporting. Our study also highlights that surrogate-based models used to predict sediments and nutrients need to better incorporate temporal components if variance estimates are to be unbiased and model inference meaningful. The transferability of models across sites, and potentially regions, will become increasingly important as organizations move to automated sensing for water-quality monitoring throughout catchments.

scholarly journals Using Landsat 8 Imagery for Remote Monitoring of Total Phosphorus as a Water Quality Parameter of Irrigation Ponds in Taiwan

2021 ◽  
Author(s):  
Po-Wen Su ◽  
Shang-Lien Lo
Keyword(s):  
Water Quality ◽  
Multiple Regression ◽  
Total Phosphorus ◽  
Satellite Imagery ◽  
Power Plants ◽  
Quality Data ◽  
Water Quality Parameter ◽  
Landsat 8 ◽  
Water Quality Data ◽  
Selection Of Variables

Abstract Monitoring water body quality parameters with high spatial and temporal resolutions is crucial because mitigation of pollution is usually costlier than early prevention/intervention. The existing monitoring methods for irrigation ponds in Taoyuan, Taiwan, are based on field measurements that have low spatial and temporal resolutions. In this study, using Landsat 8 satellite imagery, a multiple regression-derived relationship between the satellite band reflectance and the concentration of total phosphorus (TP) was established. The satellite imagery was atmospherically corrected with ACOLITE based on shortwave infrared (SWIR) bands. This method was used to select predictor variables in the multiple regression-derived equation based on forward selection of variables using a p-value and variation inflation factor (VIF) threshold. The derived equation yielded a coefficient of determination (R2) of 0.67. The near-infrared band (band 5) was found to be most significant. The Landsat 8 imagery retrieved for two of the three pond studies included only a few pixels from the ponds because parts of the pond surfaces are covered by floating photovoltaic power plants. The TP concentrations resulting from the derived equation indicate the feasibility of using satellite remote sensing methods to monitor the water quality. The derived relationships are potentially applicable to extend the availability of temporal and spatial water quality data for these irrigation ponds.

scholarly journals Modelling lake trophic state: A random forest approach

2015 ◽  
Author(s):  
Jeffrey W Hollister ◽  
W. Bryan Milstead ◽  
Betty J. Kreakie
Keyword(s):  
Water Quality ◽  
Random Forests ◽  
Trophic State ◽  
Mean Squared Error ◽  
Quality Data ◽  
Full Model ◽  
Water Quality Data ◽  
Squared Error ◽  
The Mean

Productivity of lentic ecosystems is well studied and it is widely accepted that as nutrient inputs increase, productivity increases and lakes transition from lower trophic state (e.g. oligotrophic) to higher trophic states (e.g. eutrophic). These broad trophic state classifications are good predictors of ecosystem condition, services, and disservices (e.g. recreation, aesthetics, and harmful algal blooms). While the relationship between nutrients and trophic state provides reliable predictions, it requires in situ water quality data in order to parameterize the model. This limits the application of these models to lakes with existing and, more importantly, available water quality data. To address this, we take advantage of the availability of a large national lakes water quality database (i.e. the National Lakes Assessment), land use/land cover data, lake morphometry data, other universally available data, and apply data mining approaches to predict trophic state. Using this data and random forests, we first model chlorophyll a, then classify the resultant predictions into trophic states. The full model estimates chlorophyll a with both in situ and universally available data. The mean squared error and adjusted R2 of this model was 0.09 and 0.8, respectively. The second model uses universally available GIS data only. The mean squared error was 0.22 and the adjusted R2 was 0.48. The accuracy of the trophic state classifications derived from the chlorophyll a predictions were 69% for the full model and 49% for the “GIS only” model. Random forests extend the usefulness of the class predictions by providing prediction probabilities for each lake. This allows us to make trophic state predictions and also indicate the level of uncertainity around those predictions. For the full model, these predicted class probabilites ranged from 0.42 to 1. For the GIS only model, they ranged from 0.33 to 0.96. It is our conclusion that in situ data are required for better predictions, yet GIS and universally available data provide trophic state predictions, with estimated uncertainty, that still have the potential for a broad array of applications. The source code and data for this manuscript are available from https://github.com/USEPA/LakeTrophicModelling.

Sign in / Sign up

Export Citation Format

Share Document