scholarly journals URBAN MORPHOLOGICAL DYNAMICS IN SANTIAGO (CHILE): PROPOSING SUSTAINABLE INDICATORS FROM REMOTE SENSING

Author(s):  
H. J. Hernández ◽  
M. A. Gutiérrez ◽  
M. P. Acuña

Latin America is one of the world’s most urbanised regions, with more than 80% of inhabitants living in urban areas and over 50 cities with at least 1 million inhabitants. The concept of urban structure types (UST) allows the dynamics of a growing urban environment to be captured in its quantity and quality. They are defined as areas of homogenous appearance in the urban matrix with a recognisable mixture of built-up areas and open spaces. We used the vegetation-impervious-soil (V-I-S) model approach to classify and monitor different types of USTs in Santiago (~800 km2), Chile between 1985 and 2015. The V-I-S model is based on a simplification of the large diversity of urban land cover types in three general categories: vegetation, impervious surfaces and soil. These categories were obtained by processing Landsat-5 TM and Landsat-8 OLI images. First, we applied standard radiometric calibration and co-registration methods to all datasets. Second, using a linear spectral unmixing algorithm we performed a soft classification of urban land cover types (<i>end members</i>): trees, shrubs, herbaceous plants, soils, buildings, roads and water bodies. All <i>end members</i> were validated using a combination of photointerpretation on high-resolution images (~1 m) and field data collection (only for 2015). In each pixel we used the resulting probability scores, logically grouped, to obtain final values for each V-I-S component. Third, we used statistical clustering of V-I-S values to create a set of eight pixel groups, which we interpreted as USTs and mapped them for each date. The overall accuracy for V-I-S components in 1985 and 2015 were 78% and 82%, respectively, and errors did not exhibit any spatial correlation. The main sources of differentiation between USTs were the trade-off proportions between vegetation and impervious components, whereas soil proportions remained near 5% across the city in both dates. To analyse the change in UST spatial configuration between dates, we used a set of selected landscape metrics and discussed their use as indicators for sustainable urban development. These indicators relate to the dispersion pattern of urban growth, the connectivity of open green space and the complexity in the composition of the UST types within the different sectors of the city. We were able to identify, using the dynamics exhibited by the USTs, three main zones: (1) city centre, where USTs of high-intensity development predominate, (2) eastern high-income areas whose spatial structure is marked by a relatively high urbanisation intensity with a very large proportion of vegetated spaces, and (3) peripheral areas, with significant changes in composition and configuration of USTs, in recent decades, showing high rates of urbanisation, shifting from low-medium to high densities. We concluded that these patterns and their dynamics are mainly determined by the spatial socio-economic stratification of the population.

Author(s):  
H. J. Hernández ◽  
M. A. Gutiérrez ◽  
M. P. Acuña

Latin America is one of the world’s most urbanised regions, with more than 80% of inhabitants living in urban areas and over 50 cities with at least 1 million inhabitants. The concept of urban structure types (UST) allows the dynamics of a growing urban environment to be captured in its quantity and quality. They are defined as areas of homogenous appearance in the urban matrix with a recognisable mixture of built-up areas and open spaces. We used the vegetation-impervious-soil (V-I-S) model approach to classify and monitor different types of USTs in Santiago (~800 km2), Chile between 1985 and 2015. The V-I-S model is based on a simplification of the large diversity of urban land cover types in three general categories: vegetation, impervious surfaces and soil. These categories were obtained by processing Landsat-5 TM and Landsat-8 OLI images. First, we applied standard radiometric calibration and co-registration methods to all datasets. Second, using a linear spectral unmixing algorithm we performed a soft classification of urban land cover types (<i>end members</i>): trees, shrubs, herbaceous plants, soils, buildings, roads and water bodies. All <i>end members</i> were validated using a combination of photointerpretation on high-resolution images (~1 m) and field data collection (only for 2015). In each pixel we used the resulting probability scores, logically grouped, to obtain final values for each V-I-S component. Third, we used statistical clustering of V-I-S values to create a set of eight pixel groups, which we interpreted as USTs and mapped them for each date. The overall accuracy for V-I-S components in 1985 and 2015 were 78% and 82%, respectively, and errors did not exhibit any spatial correlation. The main sources of differentiation between USTs were the trade-off proportions between vegetation and impervious components, whereas soil proportions remained near 5% across the city in both dates. To analyse the change in UST spatial configuration between dates, we used a set of selected landscape metrics and discussed their use as indicators for sustainable urban development. These indicators relate to the dispersion pattern of urban growth, the connectivity of open green space and the complexity in the composition of the UST types within the different sectors of the city. We were able to identify, using the dynamics exhibited by the USTs, three main zones: (1) city centre, where USTs of high-intensity development predominate, (2) eastern high-income areas whose spatial structure is marked by a relatively high urbanisation intensity with a very large proportion of vegetated spaces, and (3) peripheral areas, with significant changes in composition and configuration of USTs, in recent decades, showing high rates of urbanisation, shifting from low-medium to high densities. We concluded that these patterns and their dynamics are mainly determined by the spatial socio-economic stratification of the population.


Author(s):  
D. Amarsaikhan

Abstract. The aim of this research is to classify urban land cover types using an advanced classification method. As the input bands to the classification, the features derived from Landsat 8 and Sentinel 1A SAR data sets are used. To extract the reliable urban land cover information from the optical and SAR features, a rule-based classification algorithm that uses spatial thresholds defined from the contextual knowledge is constructed. The result of the constructed method is compared with the results of a standard classification technique and it indicates a higher accuracy. Overall, the study demonstrates that the multisource data sets can considerably improve the classification of urban land cover types and the rule-based method is a powerful tool to produce a reliable land cover map.


Author(s):  
Trinh Le Hung

The classification of urban land cover/land use is a difficult task due to the complexity in the structure of the urban surface. This paper presents the method of combining of Sentinel 2 MSI and Landsat 8 multi-resolution satellite image data for urban bare land classification based on NDBaI index. Two images of Sentinel 2 and Landsat 8 acquired closely together, were used to calculate the NDBaI index, in which sortware infrared band (band 11) of Sentinel 2 MSI image and thermal infrared band (band 10) of Landsat 8 image were used to improve the spatial resolution of NDBaI index. The results obtained from two experimental areas showed that, the total accuracy of classifying bare land from the NDBaI index which calculated by the proposed method increased by about 6% compared to the method using the NDBaI index, which is calculated using only Landsat 8 data. The results obtained in this study contribute to improving the efficiency of using free remote sensing data in urban land cover/land use classification.


2020 ◽  
Vol 12 (12) ◽  
pp. 1962 ◽  
Author(s):  
Stéphane Dupuy ◽  
Laurence Defrise ◽  
Valentine Lebourgeois ◽  
Raffaele Gaetano ◽  
Perrine Burnod ◽  
...  

High urbanization rates in cities lead to rapid changes in land uses, particularly in southern cities where population growth is fast. Urban and peri-urban agricultural land is often seen as available space for the city to expand, but at the same time, agricultural land provides many benefits to cities pertaining to food, employment, and eco-services. In this context, there is an urgent need to provide spatial information to support planning in complex urban systems. The challenge is to integrate analysis of agriculture and urban land-cover classes, and of their spatial and functional patterns. This paper takes up this challenge in Antananarivo (Madagascar), where agricultural plots and homes are interlocked and very small. It innovates by using a methodology already tested in rural settings, but never applied to urban environments. The key step of the analysis is to produce landscape zoning based on multisource satellite data to identify agri-urban functional areas within the city, and to explore their relationships. Our results demonstrate that the proposed classification method is well suited for mapping agriculture and urban land cover (overall accuracy = 76.56% for the 20 classes of level 3) in such a complex setting. The systemic analysis of urban agriculture patterns and functions can help policymakers and urban planners to design and build resilient cities.


2018 ◽  
Vol 7 (12) ◽  
pp. 453 ◽  
Author(s):  
Mst Ilme Faridatul ◽  
Bo Wu

Urban land cover classification and mapping is an important and ongoing research field in monitoring and managing urban sprawl and terrestrial ecosystems. The changes in land cover largely affect the terrestrial ecosystem, thus information on land cover is important for understanding the ecological environment. Quantification of land cover in urban areas is challenging due to their diversified activities and large spatial and temporal variations. To improve urban land cover classification and mapping, this study presents three new spectral indices and an automated approach to classifying four major urban land types: impervious, bare land, vegetation, and water. A modified normalized difference bare-land index (MNDBI) is proposed to enhance the separation of impervious and bare land. A tasseled cap water and vegetation index (TCWVI) is proposed to enhance the detection of vegetation and water areas. A shadow index (ShDI) is proposed to further improve water detection by separating water from shadows. An approach for optimizing the thresholds of the new indices is also developed. Finally, the optimized thresholds are used to classify land covers using a decision tree algorithm. Using Landsat-8 Operational Land Imager (OLI) data from two study sites (Hong Kong and Dhaka City, Bangladesh) with different urban characteristics, the proposed approach is systematically evaluated. Spectral separability analysis of the new indices is performed and compared with other common indices. The urban land cover classifications achieved by the proposed approach are compared with those of the classic support vector machine (SVM) algorithm. The proposed approach achieves an overall classification accuracy of 94-96%, which is superior to the accuracy of the SVM algorithm.


Sensors ◽  
2018 ◽  
Vol 18 (12) ◽  
pp. 4319 ◽  
Author(s):  
Hongsheng Zhang ◽  
Ting Wang ◽  
Yuhan Zhang ◽  
Yiru Dai ◽  
Jiangjie Jia ◽  
...  

Short-term characteristics of urban land cover change have been observed and reported from satellite images, although urban landscapes are mainly influenced by anthropogenic factors. These short-term changes in urban areas are caused by rapid urbanization, seasonal climate changes, and phenological ecological changes. Quantifying and understanding these short-term characteristics of changes in various land cover types is important for numerous urban studies, such as urbanization assessments and management. Many previous studies mainly investigated one study area with insufficient datasets. To more reliably and confidently investigate temporal variation patterns, this study employed Fourier series to quantify the seasonal changes in different urban land cover types using all available Landsat images over four different cities, Melbourne, Sao Paulo, Hamburg, and Chicago, within a five-year period (2011–2015). The overall accuracy was greater than 86% and the kappa coefficient was greater than 0.80. The R-squared value was greater than 0.80 and the root mean square error was less than 7.2% for each city. The results indicated that (1) the changing periods for water classes were generally from half a year to one and a half years in different areas; and, (2) urban impervious surfaces changed over periods of approximately 700 days in Melbourne, Sao Paulo, and Hamburg, and a period of approximately 215 days in Chicago, which was actually caused by the unavoidable misclassification from confusions between various land cover types using satellite data. Finally, the uncertainties of these quantification results were analyzed and discussed. These short-term characteristics provided important information for the monitoring and assessment of urban areas using satellite remote sensing technology.


2020 ◽  
Vol 204 ◽  
pp. 103927
Author(s):  
Jiacheng Zhao ◽  
Xiang Zhao ◽  
Shunlin Liang ◽  
Tao Zhou ◽  
Xiaozheng Du ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document