scholarly journals Coupling between reconnection and Kelvin-Helmholtz instabilities in collisionless plasmas

2009 ◽  
Vol 16 (2) ◽  
pp. 241-249 ◽  
Author(s):  
D. Grasso ◽  
D. Borgogno ◽  
F. Pegoraro ◽  
E. Tassi
Keyword(s):  
Current Density ◽  
Shear Flows ◽  
Field Model ◽  
Collisionless Plasma ◽  
Three Dimensional ◽  
Dynamical Evolution ◽  
Turbulent Regime ◽  
Helmholtz Instability ◽  
Collisionless Plasmas ◽  
Strong Shear

Abstract. In a collisionless plasma, when reconnection instability takes place, strong shear flows may develop. Under appropriate conditions these shear flows become unstable to the Kelvin-Helmholtz instability. Here, we investigate the coupling between these instabilities in the framework of a four-field model. Firstly, we recover the known results in the low β limit, β being the ratio between the plasma and the magnetic pressure. We concentrate our attention on the dynamical evolution of the current density and vorticity sheets which evolve coupled together according to a laminar or a turbulent regime. A three-dimensional extension in this limit is also discussed. Secondly, we consider finite values of the β parameter, allowing for compression of the magnetic and velocity fields along the ignorable direction. We find that the current density and vorticity sheets now evolve separately. The Kelvin-Helmholtz instability involves only the vorticity field, which ends up in a turbulent regime, while the current density maintains a laminar structure.

A Liquid Metal Flow Between Two Coaxial Cylinders System

2019 ◽  
Vol 11 (1) ◽  
pp. 79-86
Author(s):  
Abdelkrim Merah ◽  
Ridha Kelaiaia ◽  
Faiza Mokhtari
Keyword(s):  
Couette Flow ◽  
Metal Flow ◽  
Three Dimensional ◽  
Liquid Sodium ◽  
Taylor Vortex ◽  
Turbulent Regime ◽  
Coaxial Cylinders ◽  
Concentric Cylinders ◽  
Ideal Tool ◽  
The Stability

Abstract The Taylor-Couette flow between two rotating coaxial cylinders remains an ideal tool for understanding the mechanism of the transition from laminar to turbulent regime in rotating flow for the scientific community. We present for different Taylor numbers a set of three-dimensional numerical investigations of the stability and transition from Couette flow to Taylor vortex regime of a viscous incompressible fluid (liquid sodium) between two concentric cylinders with the inner one rotating and the outer one at rest. We seek the onset of the first instability and we compare the obtained results for different velocity rates. We calculate the corresponding Taylor number in order to show its effect on flow patterns and pressure field.

EXPERIMENTAL INVESTIGATION OF FLOW RESPONSE TO STATIONARY DISTURBANCE IN ROTATING-DISK FLOW

2019 ◽  
Vol XVI (2) ◽  
pp. 13-22
Author(s):  
Muhammad Ehtisham Siddiqui
Keyword(s):  
Boundary Layer ◽  
Boundary Layer Flow ◽  
Three Dimensional ◽  
Rotating Disk ◽  
Careful Analysis ◽  
Laboratory Frame ◽  
Transition To Turbulence ◽  
Turbulent Regime ◽  
Mean Velocity ◽  
Layer Flow

Three-dimensional boundary-layer flow is well known for its abrupt and sharp transition from laminar to turbulent regime. The presented study is a first attempt to achieve the target of delaying the natural transition to turbulence. The behaviour of two different shaped and sized stationary disturbances (in the laboratory frame) on the rotating-disk boundary layer flow is investigated. These disturbances are placed at dimensionless radial location (Rf = 340) which lies within the convectively unstable zone over a rotating-disk. Mean velocity profiles were measured using constant-temperature hot-wire anemometry. By careful analysis of experimental data, the instability of these disturbance wakes and its estimated orientation within the boundary-layer were investigated.

scholarly journals Phase-field modeling of grain evolutions in additive manufacturing from nucleation, growth, to coarsening

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Min Yang ◽  
Lu Wang ◽  
Wentao Yan
Keyword(s):  
Additive Manufacturing ◽  
Phase Field ◽  
Field Model ◽  
Three Dimensional ◽  
Phase Field Model ◽  
Nucleation Theory ◽  
Experimental Result ◽  
Classical Nucleation Theory ◽  
Validation Experiment ◽  
Powder Particles

AbstractA three-dimensional phase-field model is developed to simulate grain evolutions during powder-bed-fusion (PBF) additive manufacturing, while the physically-informed temperature profile is implemented from a thermal-fluid flow model. The phase-field model incorporates a nucleation model based on classical nucleation theory, as well as the initial grain structures of powder particles and substrate. The grain evolutions during the three-layer three-track PBF process are comprehensively reproduced, including grain nucleation and growth in molten pools, epitaxial growth from powder particles, substrate and previous tracks, grain re-melting and re-growth in overlapping zones, and grain coarsening in heat-affected zones. A validation experiment has been carried out, showing that the simulation results are consistent with the experimental results in the molten pool and grain morphologies. Furthermore, the grain refinement by adding nanoparticles is preliminarily reproduced and compared against the experimental result in literature.

Turbulent three-dimensional dielectric electrohydrodynamic convection between two plates

2012 ◽  
Vol 696 ◽  
pp. 228-262 ◽  
Author(s):  
A. Kourmatzis ◽  
J. S. Shrimpton
Keyword(s):  
Spatial Data ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Two Dimensions ◽  
Three Dimensions ◽  
Energy Budgets ◽  
Turbulent Regime ◽  
Scalar Flux ◽  
Wide Range ◽  
Scalar Variance

AbstractThe fundamental mechanisms responsible for the creation of electrohydrodynamically driven roll structures in free electroconvection between two plates are analysed with reference to traditional Rayleigh–Bénard convection (RBC). Previously available knowledge limited to two dimensions is extended to three-dimensions, and a wide range of electric Reynolds numbers is analysed, extending into a fully inherently three-dimensional turbulent regime. Results reveal that structures appearing in three-dimensional electrohydrodynamics (EHD) are similar to those observed for RBC, and while two-dimensional EHD results bear some similarities with the three-dimensional results there are distinct differences. Analysis of two-point correlations and integral length scales show that full three-dimensional electroconvection is more chaotic than in two dimensions and this is also noted by qualitatively observing the roll structures that arise for both low (${\mathit{Re}}_{E} = 1$) and high electric Reynolds numbers (up to ${\mathit{Re}}_{E} = 120$). Furthermore, calculations of mean profiles and second-order moments along with energy budgets and spectra have examined the validity of neglecting the fluctuating electric field ${ E}_{i}^{\ensuremath{\prime} } $ in the Reynolds-averaged EHD equations and provide insight into the generation and transport mechanisms of turbulent EHD. Spectral and spatial data clearly indicate how fluctuating energy is transferred from electrical to hydrodynamic forms, on moving through the domain away from the charging electrode. It is shown that ${ E}_{i}^{\ensuremath{\prime} } $ is not negligible close to the walls and terms acting as sources and sinks in the turbulent kinetic energy, turbulent scalar flux and turbulent scalar variance equations are examined. Profiles of hydrodynamic terms in the budgets resemble those in the literature for RBC; however there are terms specific to EHD that are significant, indicating that the transfer of energy in EHD is also attributed to further electrodynamic terms and a strong coupling exists between the charge flux and variance, due to the ionic drift term.

Three-dimensional porous copper-decorated bismuth-based nanofoam for boosting electrochemical reduction of CO2 to formate

2021 ◽  
Author(s):  
Yingchun Zhang ◽  
Changsheng Cao ◽  
Xintao Wu ◽  
Qi-Long Zhu
Keyword(s):  
Current Density ◽  
High Current Density ◽  
Three Dimensional ◽  
Co2 Reduction ◽  
Reduction Reaction ◽  
High Current ◽  
Porous Copper ◽  
Reduction Of Co2 ◽  
Co2 Reduction Reaction ◽  
Wide Potential

Bismuth (Bi)-based nanomaterials are considered as the promising electrocatalysts for electrocatalytic CO2 reduction reaction (CO2RR), but it is challenging to achieve high current density and selectivity in a wide potential...

Liutex force field model applied to three-dimensional flows around a circular cylinder at Re = 3 900

2021 ◽  
Vol 33 (3) ◽  
pp. 479-487
Author(s):  
Wei-wen Zhao ◽  
Chun-hui Ma ◽  
De-cheng Wan ◽  
Yi-qian Wang
Keyword(s):  
Circular Cylinder ◽  
Force Field ◽  
Field Model ◽  
Three Dimensional
Sign in / Sign up

Export Citation Format

Share Document