scholarly journals Using seismic attributes in seismotectonic research: an application to the Norcia <i>M</i><sub>w</sub> = 6.5 earthquake (30 October 2016) in central Italy

Solid Earth ◽  
2020 ◽  
Vol 11 (2) ◽  
pp. 329-348 ◽  
Author(s):  
Maurizio Ercoli ◽  
Emanuele Forte ◽  
Massimiliano Porreca ◽  
Ramon Carbonell ◽  
Cristina Pauselli ◽  
...  
Keyword(s):  
Seismic Reflection ◽  
Central Italy ◽  
Seismic Attributes ◽  
Tectonic Structures ◽  
Seismic Attribute ◽  
Epicentral Zone ◽  
Seismic Reflection Data ◽  
Near Surface ◽  
Reflection Data ◽  
Attribute Analysis

Abstract. In seismotectonic studies, seismic reflection data are a powerful tool to unravel the complex deep architecture of active faults. Such tectonic structures are usually mapped at the surface through traditional geological surveying, whilst seismic reflection data may help to trace their continuation from the near surface down to hypocentral depths. On seismic reflection data, seismic attributes are commonly used by the oil and gas industry to aid exploration. In this study, we propose using seismic attributes in seismotectonic research for the first time. The study area is a geologically complex region of central Italy, struck during 2016–2017 by a long-lasting seismic sequence, including a Mw 6.5 main shock. Three vintage seismic reflection profiles are currently the only ones available at the regional scale across the epicentral zone. These represent a singular opportunity to attempt a seismic attribute analysis by running attributes like the “energy” and the “pseudo-relief”. Our results are critical, as they provide information on the relatively deep structural setting, mapping a prominent, high-amplitude regional reflector interpreted as the top of basement, which is an important rheological boundary. Complex patterns of high-angle discontinuities crossing the reflectors have also been identified by seismic attributes. These steeply dipping fabrics are interpreted as the expression of fault zones belonging to the active normal fault systems responsible for the seismicity of the region. Such peculiar seismic signatures of faulting are consistent with the principal geological and tectonic structures exposed at surface. In addition, we also provide convincing evidence of an important primary tectonic structure currently debated in the literature (the Norcia antithetic fault) as well as several buried secondary fault splays. This work demonstrates that seismic attribute analysis, even if used on low-quality vintage 2D data, may contribute to improving the subsurface geological interpretation in areas characterized by limited and/or low-quality subsurface data but with potentially high seismic hazard.

scholarly journals Using Seismic Attributes in seismotectonic research: an application to the Norcia's Mw = 6.5 earthquake (30th October 2016) in Central Italy

2019 ◽  
Author(s):  
Maurizio Ercoli ◽  
Emanuele Forte ◽  
Massimiliano Porreca ◽  
Ramon Carbonell ◽  
Cristina Pauselli ◽  
...  
Keyword(s):  
Seismic Reflection ◽  
Central Italy ◽  
Seismic Attributes ◽  
Seismic Attribute ◽  
Data Set ◽  
Epicentral Zone ◽  
Seismic Reflection Data ◽  
Near Surface ◽  
Reflection Data ◽  
Attribute Analysis

Abstract. In seismotectonic studies, seismic reflection data are a powerful tool to unravel the complex deep architecture of active faults. Such tectonic structures are usually mapped at surface through traditional geological surveying whilst seismic reflection data may help to trace their continuation from the near-surface down to hypocentral depth. In this study, we propose the application of the seismic attributes technique, commonly used in seismic reflection exploration by oil industry, to seismotectonic research for the first time. The study area is a geologically complex region of Central Italy, recently struck by a long-lasting seismic sequence including a Mw 6.5 main-shock. A seismic reflection data-set consisting of three vintage seismic profiles, currently the only available across the epicentral zone, constitutes a singular opportunity to attempt a seismic attribute analysis. This analysis resulted in peculiar seismic signatures which generally correlate with the exposed surface geologic features, and also confirming the presence of other debated structures. These results are critical, because provide information also on the relatively deep structural setting, mapping a prominent, high amplitude regional reflector that marks the top basement, interpreted as important rheological boundary. Complex patterns of high-angle discontinuities crossing the reflectors have been also identified. These dipping fabrics are interpreted as the expression of fault zones, belonging to the active normal fault systems responsible for the seismicity of the region. This work demonstrates that seismic attribute analysis, even if used on low-quality vintage 2D data, may contribute to improve the subsurface geological interpretation of areas characterized by high seismic potential.

Automating the acquisition of 3D near‐surface seismic reflection data

2009 ◽  
Author(s):  
Steven D. Sloan ◽  
Don W. Steeples ◽  
Georgios P. Tsoflias ◽  
Mihan H. McKenna
Keyword(s):  
Seismic Reflection ◽  
Seismic Reflection Data ◽  
Near Surface ◽  
Reflection Data

Investigating fault continuity associated with geologic carbon storage planning in the Illinois Basin

2014 ◽  
Vol 2 (1) ◽  
pp. SA151-SA162 ◽  
Author(s):  
John H. McBride ◽  
R. William Keach ◽  
Eugene E. Wolfe ◽  
Hannes E. Leetaru ◽  
Clayton K. Chandler ◽  
...  
Keyword(s):  
Carbon Storage ◽  
Seismic Reflection ◽  
Oil Field ◽  
Illinois Basin ◽  
Storage Site ◽  
3D Seismic ◽  
Seismic Attribute ◽  
Seismic Reflection Data ◽  
Reflection Data ◽  
Attribute Analyses

Because the confinement of [Formula: see text] in a storage reservoir depends on a stratigraphically continuous set of seals to isolate the fluid in the reservoir, the detection of structural anomalies is critical for guiding any assessment of a potential subsurface carbon storage site. Employing a suite of 3D seismic attribute analyses (as opposed to relying upon a single attribute) maximizes the chances of identifying geologic anomalies or discontinuities (e.g., faults) that may affect the integrity of a seal that will confine the stored [Formula: see text] in the reservoir. The Illinois Basin, a major area for potential carbon storage, presents challenges for target assessment because geologic anomalies can be ambiguous and easily misinterpreted when using 2D seismic reflection data, or even 3D data, if only conventional display techniques are used. We procured a small 3D seismic reflection data set in the central part of the basin (Stewardson oil field) to experiment with different strategies for enhancing the appearance of discontinuities by integrating 3D seismic attribute analyses with conventional visualizations. Focusing on zones above and below the target interval of the Cambrian Mt. Simon Sandstone, we computed attribute traveltime slices (combined with vertical views) based on discontinuity computations, crossline-directed amplitude change, azimuth of the dip, shaded relief, and fault likelihood attributes. The results provided instructive examples of how discontinuities (e.g., subseismic scale faults) may be almost “invisible” on conventional displays but become detectable and mappable using an appropriate integration of 3D attributes. Strong discontinuities in underlying Precambrian basement rocks do not necessarily propagate upward into the target carbon storage interval. The origin of these discontinuities is uncertain, but we explored a possible strike-slip role that also explains the localization of a structural embayment developed in Lower Paleozoic strata above the basement discontinuities.

Tomographic determination of velocity and depth in laterally varying media

Geophysics ◽  
1985 ◽  
Vol 50 (6) ◽  
pp. 903-923 ◽  
Author(s):  
T. N. Bishop ◽  
K. P. Bube ◽  
R. T. Cutler ◽  
R. T. Langan ◽  
P. L. Love ◽  
...  
Keyword(s):  
Seismic Reflection ◽  
Seismic Velocity ◽  
Real Data ◽  
Seismic Reflection Data ◽  
Near Surface ◽  
Reflection Data ◽  
Tomographic Method ◽  
Recorded Data ◽  
The Difference

Estimation of reflector depth and seismic velocity from seismic reflection data can be formulated as a general inverse problem. The method used to solve this problem is similar to tomographic techniques in medical diagnosis and we refer to it as seismic reflection tomography. Seismic tomography is formulated as an iterative Gauss‐Newton algorithm that produces a velocity‐depth model which minimizes the difference between traveltimes generated by tracing rays through the model and traveltimes measured from the data. The input to the process consists of traveltimes measured from selected events on unstacked seismic data and a first‐guess velocity‐depth model. Usually this first‐guess model has velocities which are laterally constant and is usually based on nearby well information and/or an analysis of the stacked section. The final model generated by the tomographic method yields traveltimes from ray tracing which differ from the measured values in recorded data by approximately 5 ms root‐mean‐square. The indeterminancy of the inversion and the associated nonuniqueness of the output model are both analyzed theoretically and tested numerically. It is found that certain aspects of the velocity field are poorly determined or undetermined. This technique is applied to an example using real data where the presence of permafrost causes a near‐surface lateral change in velocity. The permafrost is successfully imaged in the model output from tomography. In addition, depth estimates at the intersection of two lines differ by a significantly smaller amount than the corresponding estimates derived from conventional processing.

An example of extreme near-surface variability in shallow seismic reflection data

2016 ◽  
Vol 4 (3) ◽  
pp. SH1-SH9
Author(s):  
Steven D. Sloan ◽  
J. Tyler Schwenk ◽  
Robert H. Stevens
Keyword(s):  
Seismic Reflection ◽  
Field Data ◽  
Low Velocity ◽  
Seismic Reflection Data ◽  
Near Surface ◽  
Shallow Subsurface ◽  
Reflection Data ◽  
Shallow Seismic ◽  
Low Velocity Layer ◽  
Velocity Layer

Variability of material properties in the shallow subsurface presents challenges for near-surface geophysical methods and exploration-scale applications. As the depth of investigation decreases, denser sampling is required, especially of the near offsets, to accurately characterize the shallow subsurface. We have developed a field data example using high-resolution shallow seismic reflection data to demonstrate how quickly near-surface properties can change over short distances and the effects on field data and processed sections. The addition of a relatively thin, 20 cm thick, low-velocity layer can lead to masked reflections and an inability to map shallow reflectors. Short receiver intervals, on the order of 10 cm, were necessary to identify the cause of the diminished data quality and would have gone unknown using larger, more conventional station spacing. Combined analysis of first arrivals, surface waves, and reflections aided in determining the effects and extent of a low-velocity layer that inhibited the identification and constructive stacking of the reflection from a shallow water table using normal-moveout-based processing methods. Our results also highlight the benefits of using unprocessed gathers to pragmatically guide processing and interpretation of seismic data.

scholarly journals ANALYSIS OF SEISMIC ATTRIBUTES TO RECOGNIZE BOTTOM SIMULATING REFLECTORS IN THE FOZ DO AMAZONAS BASIN, NORTHERN BRAZIL

2019 ◽  
Vol 37 (1) ◽  
pp. 43
Author(s):  
Laisa da Fonseca Aguiar ◽  
Antonio Fernando Menezes Freire ◽  
Luiz Alberto Santos ◽  
Ana Carolina Ferreira Dominguez ◽  
Eloíse Helena Policarpo Neves ◽  
...  
Keyword(s):  
Gas Hydrates ◽  
Seismic Reflection ◽  
Seismic Attributes ◽  
Second Derivative ◽  
Seismic Section ◽  
Seismic Reflection Data ◽  
Reflection Data ◽  
Bottom Simulating Reflectors ◽  
Northern Portion ◽  
Seismic Amplitudes

ABSTRACT. Foz do Amazonas basin is located at the northern portion of the Brazilian Equatorial Margin, along the coastal zone of Amapá and Pará states. This basin has been subjected to several studies, and the presence of gas hydrates has been demonstrated locally through sampling, and over broader areas using seismic reflection data. Seismic reflection is one method to identify the occurrence of gas hydrates, as they give rise to well-marked reflectors that simulate the seafloor, known as Bottom Simulating Reflectors (BSR). This study aims to investigate BSRs associated with the presence of methane hydrates in the Foz do Amazonas Basin through the application of seismic attributes. It was compared seismic amplitudes from the seafloor and the BSR to validate the inferred seismic feature. Then, Envelope and Second Derivative were chosen for highlighting the BSR in seismic section. The results showed an inversion of polarities in the signal between the seafloor (positive polarity) and the BSR (negative polarity). The integrated use of these approaches allowed validating the level of the BSR in line 0239-0035 and inferring the presence of gas hydrates, revealing to be a useful tool for interpreting the distribution of the gas hydrates in the Foz do Amazonas Basin.Keywords: Gas hydrates, envelope, second derivative of envelope, Brazilian Equatorial Margin.RESUMO. A Bacia da Foz do Amazonas é localizada na porção norte da Margem Equatorial Brasileira, ao longo da zona de costa dos estados do Amapá e do Pará. A presença de hidratos de gás é comprovada localmente através de amostragem, e em áreas mais distantes através de dados de sísmica de reflexão. A sísmica de reflexão é eficaz para identificar hidratos de gás, pois refletores que simulam o fundo do mar, Bottom Simulating Reflectors (BSR), são utilizados para inferir a presença dos hidratos de metano. Este estudo pretende identificar feições sísmicas associadas aos hidratos de metano na Bacia da Foz do Amazonas através da aplicação de atributos sísmicos. Foram comparadas as amplitudes sísmicas do fundo do mar e do BSR para validar a feição sísmica inferida. Então, os atributos Envelope e Segunda Derivada do Envelope foram escolhidos por destacarem o BSR. Os resultados mostraram uma inversão das polaridades no sinal entre o fundo do mar (positivo) e o BSR (negativo). O uso integrado dessas abordagens valida a localização do BSR na linha 0239-0035 e infere a ocorrência de hidratos de gás, revelando ser uma ferramenta útil para interpretação da distribuição de hidratos de gás na Bacia da Foz do Amazonas.Palavras-chave: Hidratos de metano, envelope, segunda derivada do envelope, Margem Equatorial Brasileira.

scholarly journals Time-lapse imaging using 3D ultra-high-frequency marine seismic reflection data

Geophysics ◽  
2020 ◽  
Vol 85 (2) ◽  
pp. P13-P25
Author(s):  
Michael J. Faggetter ◽  
Mark E. Vardy ◽  
Justin K. Dix ◽  
Jonathan M. Bull ◽  
Timothy J. Henstock
Keyword(s):  
High Frequency ◽  
Seismic Reflection ◽  
High Tide ◽  
Time Lapse ◽  
Data Set ◽  
Seismic Reflection Data ◽  
Near Surface ◽  
Ultra High Frequency ◽  
Reflection Data ◽  
Marine Seismic

Time-lapse (4D) seismic imaging is now widely used as a tool to map and interpret changes in deep reservoirs as well as investigate dynamic, shallow hydrological processes in the near surface. However, there are very few examples of time-lapse analysis using ultra-high-frequency (UHF; kHz range) marine seismic reflection data. Exacting requirements for navigation can be prohibitive for acquiring coherent, true-3D volumes. Variable environmental noise can also lead to poor amplitude repeatability and make it difficult to identify differences that are related to real physical changes. Overcoming these challenges opens up a range of potential applications for monitoring the subsurface at decimetric resolution, including geohazards, geologic structures, as well as the bed-level and subsurface response to anthropogenic activities. Navigation postprocessing was incorporated to improve the acquisition and processing workflow for the 3D Chirp subbottom profiler and provide stable, centimeter-level absolute positioning, resulting in well-matched 3D data and mitigating 4D noise for data stacked into [Formula: see text] common-midpoint bins. Within an example 4D data set acquired on the south coast of the UK, interpretable differences are recorded within a shallow gas blanket. Reflections from the top and bottom of a gas pocket are imaged at low tide, whereas at high tide only the upper reflection is imaged. This case study demonstrates the viability of time-lapse UHF 3D seismic reflection for quantitative mapping of decimeter-scale changes within the shallow marine subsurface.

Sign in / Sign up

Export Citation Format

Share Document