Method Development and Validation for Estimation of related Substances in Tilorone Dihydrochloride using RP¬-HPLC

2021 ◽  
pp. 3319-3324
Author(s):  
M. Zeba Baktiyar ◽  
B. Mohammed Ishaq ◽  
Siva Sanker Reddy L ◽  
Sreenivasulu M.
Keyword(s):  
Mobile Phase ◽  
Method Development ◽  
Hplc Method ◽  
Column Temperature ◽  
Related Substances ◽  
Rp Hplc ◽  
Ich Guidelines ◽  
Wide Range ◽  
Method Development And Validation ◽  
Development And Validation

A simple, precise and reproducible RP-HPLC method was developed for the estimation of related substances in tilorone dihydrochloride. Quantification was performed using a Zorbax SB-phenyl column (150 × 4.6mm, 5µ) with mobile phase A: 20mM potassium dihydro phosphate + 2ml of triethylamine, pH 2.30 and mobile phase B: acetonitrile, methanol and water 60: 20: 20% v/v. A gradient program was followed with a run time of 55 minutes at a flow rate of 1.0 ml/min. The column temperature was maintained at 40°C, the injection volume was 10 µl and the detection was performed at 269nm using a PDA detector. The retention time of Tilorone dihydrochloride was found to be 10.36 minutes. The proposed method has been validated according to the ICH guidelines for Linearity, Precision, Accuracy, LOD, and LOQ. The method was linear from 0.157 - 3.934μg/ml for standard, 0.153-3.820μg/ml and 0.166 - 4.140μg/ml for impurities, TLHC01 and TLHC02 respectively. The impurities TLHC01 and TLHC02 have been mapped in all stress conditions. The LOD and LOQ of TLHC01 were found at 1.757μg/ml and 5.857μg/ml and 1.919μg/ml and 6.396μg/ml respectively for TLHC02 respectively. Statistical analysis showed that the method was precision, reproducible, selective, specific and accurate for the analysis of Tilorone dihydrochloride and its impurities. The wide range of linearity, sensitivity, precision, short retention times and simple mobile phase have shown that the method is suitable for the routine quantification of mass impurities of tilorone hydrochloride and its dosage pharmaceutical forms with high precision and accuracy.

scholarly journals Method Development and Validation of RP-HPLC Method for the Estimation of Ormeloxifene

2017 ◽  
Vol 2 (03) ◽  
pp. 78-82
Author(s):  
Anusha Shivaraj ◽  
Shireesha Battula
Keyword(s):  
Mobile Phase ◽  
Room Temperature ◽  
Method Development ◽  
Hplc Method ◽  
Rp Hplc ◽  
Ich Guidelines ◽  
Method Development And Validation ◽  
Development And Validation ◽  
Isocratic Mode ◽  
Ich Guideline

A new simple, specific, accurate, precise RP-HPLC method has been developed for the estimation of Ormeloxifene. The chromatographic separation for Ormeloxifene was achieved with mobile phase containing methanol :ACN(70:30 v/v), agilent C18 column (4.6 x150 mm) 5 μ at room temperature and UV detection at 274nm.The compounds were eluted in the isocratic mode at a flow rate of 1ml/min. The retention time of Ormeloxifene was found to be 2.497min. The method was validated according to ICH guideline for linearity, specificity, precision, accuracy, LOD, LOQ and robustness in accordance with ICH guidelines.

scholarly journals A New Quantitative Analytical Method Development and Validation for the Analysis of Boceprevir in Bulk and Marketed Formulation

2018 ◽  
Vol 10 (03) ◽  
Author(s):  
Bhetanabotla Chandramowli ◽  
B.M Syam Kumar ◽  
D.V. R. N. Bhikshapathi ◽  
Bigala B Rajkamal
Keyword(s):  
Chromatographic Analysis ◽  
Mobile Phase ◽  
Method Development ◽  
Hplc Method ◽  
Capsule Formulation ◽  
Rp Hplc ◽  
Ich Guidelines ◽  
Validation Parameters ◽  
Method Development And Validation ◽  
Development And Validation

A simple, precise and accurate RP-HPLC technique was developed and the developed method was validated for the regular analysis of Boceprevir. Chromatographic analysis was performed by selecting X-Terra ODS ( C18) column (4.6 mm i.d. × 250 mm, 5μ), Acetonitrile : Phosphate buffer pH -3 ( 90 : 10% v/v) as mobile phase, 1.0 ml/min as flow rate and 20μl injection volume. The LC chromatographic peak was eluted at 3.6 min at 235 nm as UV detection wavelength. The developed method was validated as per the ICH guidelines and the Validation parameters were specificity, accuracy, linearity, precision, LOD and LOQ. Linear relationship for Boceprevir established in the concentration range of 50 to 150μg/mL. Accuracy in terms of percentage recovery found in the range between 98 to 101%. LOD and LOQ values were found to be 2.3 and 7.123μg/mL respectively. The results of the method established that the new RP-HPLC method is convenient and simple in regular analysis of Boceprevir in bulk and capsule formulation.

scholarly journals Method Development and Validation of Degradation Studies of Favipiravir by RP-HPLC

2021 ◽  
pp. 220-228
Author(s):  
. Shyamala ◽  
Dongamanti Ashok
Keyword(s):  
Mobile Phase ◽  
Method Development ◽  
Hplc Method ◽  
Mobile Phase Flow Rate ◽  
Rp Hplc ◽  
Wide Range ◽  
Method Development And Validation ◽  
Development And Validation ◽  
Analytical Standards ◽  
Theoretical Plates

RP HPLC method was developed by this study estimation of favipiravir. This method is developed by Shimadzu LC -2010 HT by using a C18 (250 X 4.6 X mm X 5µ) column in solvents Water(OPA)+ACN  (60:40)v/v as mobile phase and the temperature was maintained at 25°C. The mobile phase flow rate of 1ml/min was pumped and sample wavelength was detected at 324 nm by ultraviolet -visible spectrophotometer. The Rt was found 4.453 min. The number of theoretical plates and tailing factor for favipiravir was observed 82651(NLT 2000) and 1.265 (NMT 2). The method was validated for analytical standards such as linearity, accuracy, precision, LOD, LOQ and robustness. LOD and LOQ values were calculated from regression of favipiravir 1.26 and 3.83 µg/ml.The regression equation of validated method for favipiravir is Y=253.5x+1881.In a wide range of 4 to 20 (µg/ml) the linearity was observed. Degradation methods were also performed.

scholarly journals RP-HPLC method development and validation for estimation of rivaroxaban in pharmaceutical dosage forms

2013 ◽  
Vol 49 (2) ◽  
pp. 359-366 ◽  
Author(s):  
Mustafa Çelebier ◽  
Tuba Reçber ◽  
Engin Koçak ◽  
Sacide Altinöz
Keyword(s):  
Method Development ◽  
Internal Standard ◽  
Hplc Method ◽  
Pharmaceutical Dosage Forms ◽  
Rp Hplc ◽  
Ich Guidelines ◽  
Method Development And Validation ◽  
Hplc Method Development ◽  
Development And Validation ◽  
Tablet Dosage

Rivaroxaban, an anti-clotting medication, acts at a crucial point in the blood-clotting process and stops the formation of blood clots. In this study, RP-HPLC method was developed for the determination of rivaroxaban in tablets (Xarelto® (10 mg)). Phenomenex Luna 5 µm C18 100 Å LC Column (250 x 4.6 mm) was used at 40 ºC. Isocratic elution was performed with ACN:Water (55:45 v/v) mixture. The flow rate was 1.2 mL min-1 and UV detection was at 249 nm. Internal standard (Caffeine) and rivaroxaban were eluted within 2.21 and 3.37 minutes, respectively. The developed method was validated according to the ICH guidelines and found to be linear within the range 0.005 - 40.0 µg mL-1. The method was accurate, precise, robust and rapid. Thus, it was applied successfully for the quality control assay of rivaroxaban in tablet dosage form.

Method Development and Validation for Estimation of Istradefylline in Tablet Dosage form by RP-HPLC

2021 ◽  
pp. 4767-4772
Author(s):  
Krishna Kishore Adireddy ◽  
Srinivasa Rao Baratam ◽  
Nagarjuna Hari Pratap S
Keyword(s):  
Dosage Form ◽  
Method Development ◽  
Hplc Method ◽  
Solution Stability ◽  
Rp Hplc ◽  
Ich Guidelines ◽  
Method Development And Validation ◽  
Development And Validation ◽  
Tablet Dosage

A simple, rapid, accurate and precise RP-HPLC method was developed and validated for the determination of Istradefylline in table dosage form. Chromatographic analysis of the drug was achieved on Shimadzu HPLC comprising of LC- 20 AD binary gradient pump, a variable wavelength programmable SPD-20A detector and SCL system controller. C18G column (250 mm x 4.6 mm, 5 μ) as stationary phase with mobile phase consisting of 0.1 % orthophosphoric acid and acetonitrile in the ratio of 30: 70 v/v. The method showed a good linear response in the concentration range of 10-90 μg/ml with correlation coefficient of 0.9993. The flow rate was maintained at 1.0 ml/min and detection was carried out at 246 nm. The retention time was 3.125 min. The method was statistically validated for accuracy, precision, linearity, ruggedness, robustness, solution stability, selectivity and sensitivity. The results obtained in the study were within the limits of ICH guidelines and hence this method can be used for the determination of istradefylline in tablet formulation.

Simple and Sensitive Analytical Method Development and Validation of Nitazoxanide and Ofloxacin by RP- HPLC

2021 ◽  
pp. 84-86
Author(s):  
Abhishek Agrawal ◽  
Prem Kumar Bichala ◽  
Swapna Singh
Keyword(s):  
Dosage Form ◽  
Method Development ◽  
Hplc Method ◽  
Pharmaceutical Dosage Form ◽  
Quality Control Laboratory ◽  
Rp Hplc ◽  
Ich Guidelines ◽  
Method Development And Validation ◽  
Development And Validation

RP-HPLC method was developed for the determination for the validation of Nitazoxanide and Ofloxacin in pharmaceutical dosage form. Chromatographic separation was performed on Develosil ODS HG-5 RP C18, 15x4.6mm, 5µm column, with mobile phase comprising of mixture of ACN: Methanol: Citric acid in the ratio of 50:45:5 v/v, at the flow rate 1.0ml/min and the detection was carried out at 296nm. The comprehensive forced stress testing has been carried out as per USP guidelines. The drug Nitazoxanide is subjected to synthetic Benzamide, and the drug Ofloxacin is subject to synthetic Fluoroquinolone. RP- HPLC method was developed to separate analyte from all other degradation peaks. The method was successfully validated as per ICH guidelines for the purpose of conducting studies of the analyte in quality control laboratory. The drug was subjected to different degradation conditions; it was found to be stable in all degradation conditions. The purposed HPLC method was found to be precise, specific, accurate, rapid and economical for the determination of Nitazoxanide and Ofloxacin in pharmaceutical dosage form. The sample recoveries in all formulations were in good agreement with their respective label claims and this method can be used for routine analysis. The linearity range was found to be 0-50 (µg/ml) for Nitazoxanide and 0-50 (µg/ml) for Ofloxacin. Calibration curve was plotted and correlation co-efficient for the drugs found to be 0.999 and 0.997. Hence the results obtained were within the limits.

RP-HPLC METHOD DEVELOPMENT AND VALIDATION FOR SIMULTANEOUS ESTIMATION OF LINAGLIPTIN AND EMPAGLIFLOZIN

INDIAN DRUGS ◽  
2019 ◽  
Vol 56 (05) ◽  
pp. 68-71
Author(s):  
A Lakshmana Rao ◽  
◽  
T. Prasanthi ◽  
E. L Anusha
Keyword(s):  
Mobile Phase ◽  
Dosage Form ◽  
Method Development ◽  
Hplc Method ◽  
Simultaneous Estimation ◽  
Rp Hplc ◽  
Method Development And Validation ◽  
Hplc Method Development ◽  
Development And Validation ◽  
Tablet Dosage

A simple, accurate and precise RP-HPLC method was developed for the simultaneous estimation of the linagliptin and empagliflozin in tablet dosage form. Chromatogram was run through Kromasil 250 x 4.6 mM, 5mM column, mobile phase containing 0.1% o-phosphoric acid buffer and acetonitrile in the ratio of 60:40%v/v was pumped through column at a flow rate of 1 mL/min. The optimized wavelength was 230 nm. Retention times of linagliptin and empagliflozin were found to be 2.759 min and 2.139 min. %RSD of the Linagliptin and Empagliflozin were found to be 0.5 and 0.6 respectively. Percentage assay was obtained as 99.91% and 100.15% for linagliptin and empagliflozin, respectively. LOD, LOQ values obtained for linagliptin and empagliflozin were 0.23 μg/ml and 0.44 μg/mL and 0.70 μg/mL and 1.34 μg/mL, respectively. Thus, the current study showed that the developed RP-HPLC method is sensitive and selective for the estimation of linagliptin and empagliflozin in combined dosage form.

scholarly journals METHOD DEVELOPMENT AND VALIDATION OF EPROSARTAN MESYLATE AND ITS IMPURITIES USING REVERSE PHASE HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY

2016 ◽  
Vol 8 (4) ◽  
pp. 49 ◽  
Author(s):  
O. S. S. Chandana ◽  
D. Sathis Kumar ◽  
R. Ravichandra Babu
Keyword(s):  
High Performance ◽  
Method Development ◽  
Hplc Method ◽  
Reverse Phase ◽  
Related Substances ◽  
Rp Hplc ◽  
Method Development And Validation ◽  
The Mean ◽  
Development And Validation

Objective: Our main objective is to develop an accurate and precise RP-HPLC method for the determination of Eprosartan Mesylate and its impurities. Methods: A Develosil ODS UG-5; (150 × 4.6) mm; 5 µm column was used for the Separation of drugs by a mobile phase consisting of Buffer and Acetonitrile mixture in the gradient proportion. The flow rate maintained was 0.8 ml/min and the wavelength used for detection was 235 nm.Results: The linearity was observed in the range of 0.025-50µg/ml of spiked impurities in Eprosartan Mesylate, impurity 1 and impurity 2 with a correlation coefficient of 0.99927, 0.99910 and 0.99934 respectively. The mean percentage recoveries for LOQ, 50%, 80%, 100%, 150% and 200% accuracy were found to be 101.5±1.51, 107.0±1.7, 104.6±0.4, 102.8±0.36, 101.7±0.26 and 101.3±0.15 respectively for impurities in Eprosartan Mesylate, impurity 1 and impurity 2. Linearity, accuracy, precision and robustness parameters for the suggested method were estimated for validation.Conclusion: The developed method is uncomplicated, accurate, sensitive and precise for the determination of related substances in the Eprosartan Mesylate. The satisfying % recoveries and low % RSD Values confirmed the suitability of the developed method for the usual analysis of Eprosartan mesylate in pharmaceuticals.

scholarly journals Method development and validation for simultaneous estimation of methotrexate and curcumin in Bulk Drug by using RP-HPLC

2019 ◽  
Vol 9 (6-s) ◽  
pp. 127-135
Author(s):  
Amar Deep Ankalgi ◽  
Nitin Kumar Chaudhary ◽  
Pooja Kaushal ◽  
Mahendra Singh Ashawat
Keyword(s):  
Method Development ◽  
Hplc Method ◽  
Simultaneous Estimation ◽  
Rp Hplc ◽  
Economic Method ◽  
Ich Guidelines ◽  
Method Development And Validation ◽  
Bulk Drug ◽  
Natural Herb ◽  
Development And Validation

Curcumin is the natural herb that shows effect in the treatment of cancer and rheumatoid arthritis and methotrexate is well known anticancer and anti-rheumatoid drug. Literature survey reveals that there was no method available for the selected drug combination. So, here an attempt has been made to develop simple, rapid and economic method for simultaneous estimation of methotrexate and curcumin in bulk drug by using RP-HPLC method. The percentage assay from optimized method was found to be 99.68% and 99.76% for methotrexate and curcumin respectively.  The proposed method was validated for  linearity, accuracy, precision and robustness according to ICH guidelines and were found to be   within the standard range. Keywords: RP- HPLC, methotrexate, Linearity, anticancer

scholarly journals STABILITY INDICATIVE AND COST EFFECTIVE ANALYTICAL METHOD DEVELOPMENT AND VALIDATION OF FAVIPIRAVIR AND PERAMIVIR IN BULK AND PHARMACEUTICAL DOSAGE FORM BY USING RP-HPLC

2021 ◽  
pp. 265-271
Author(s):  
SRINIVAS LINGABATHULA ◽  
NEELU JAIN
Keyword(s):  
Method Development ◽  
Cost Effective ◽  
Hplc Method ◽  
Pharmaceutical Dosage Form ◽  
Pharmaceutical Ingredients ◽  
Related Substances ◽  
Rp Hplc ◽  
Ich Guidelines ◽  
Test Concentration ◽  
Development And Validation

Objective: The current investigation was pointed at developing and progressively validating novel, simple, responsive and stable RP-HPLC method for the measurement of active pharmaceutical ingredients of Favipiravir and Peramivir and their related substances. Methods: A simple, selective, validated and well-defined stability that shows gradient RP-HPLC methodology for the quantitative determination of Favipiravir and Peramivir. The chromatographic strategy utilized Inertsil ODS column of dimensions 250x4.6 mm, 5 micron, using isocratic elution with a mobile phase of acetonitrile and 0.1 percent orthophosphoric acid (70:30). A flow rate of 1 ml/min and a detector wavelength of 260 nm utilizing the PDA detector was given in the instrumental settings. Using the impurity-spiked solution, the chromatographic approach was streamlined. Results: Validation of the proposed method was carried out according to an international conference on harmonization (ICH) guidelines. LOD and LOQ for the two active ingredients and their impurities were established with respect to test concentration. The calibration charts plotted were linear with a regression coefficient of R2>0.999, which means the linearity was within the limit. Recovery, specificity, linearity, accuracy, robustness, ruggedness was determined as a part of method validation and the results were found to be within the acceptable range. Conclusion: The proposed method to be fast, simple, feasible and affordable in RS condition. During stability tests, it can be used for routine analysis of production samples and to verify the quality of drug samples during stability studies.

Sign in / Sign up

Export Citation Format

Share Document