scholarly journals Optimization of aqueous extraction conditions for bioactive compounds from fresh Pouzolzia zeylanica plant using response surface methodology

2020 ◽  
Vol 19 (03) ◽  
pp. 65-74
Author(s):  
Tan D. Nguyen
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Extraction Process ◽  
Hot Water ◽  
Soluble Solids ◽  
Extraction Temperature ◽  
Total Soluble Solids ◽  
Dependent Variables ◽  
Solids Content ◽  
Experimental Values

Response surface methodology was applied to optimize the extraction of phenolic compounds from fresh Pouzolzia zeylanica plant using hot water as a solvent. A central composite design (CCD) in form (23+star) was used to investigate the effects of two independent variables, namely, extraction temperature (70 to 90oC) and extraction time (20 to 40 min). The dependent variables were the content of anthocyanin, flavonoid, polyphenol, tannin and total soluble solids of extracted solution. A second-order polynomial model was used for predicting the response. The results showed that the optimal extraction process was obtained at 84.4oC for 31.7 min. The experimental values agreed with predicted within a 95% confidence interval. Consequently, the contents of anthocyanin, flavonoid, polyphenol and tannin were 38.66 mgCE/100 g, 3.01 mgQE/g, 5.17 mgGAE/g, 4.07 mgTAE/g fresh weight, and total soluble solids content was 0.73%, respectively.

Optimization of Extraction Process of Water-Soluble Polysaccharides from Porphyra by Response Surface Methodology

2013 ◽  
Vol 864-867 ◽  
pp. 526-530
Author(s):  
Ying Chang Li ◽  
Ya Li Wang ◽  
Zuo Wei Li
Keyword(s):  
Response Surface Methodology ◽  
Sulfuric Acid ◽  
Response Surface ◽  
Industrial Process ◽  
Extraction Process ◽  
Water Soluble ◽  
Hot Water ◽  
Social Benefits ◽  
Process Conditions ◽  
Extraction Temperature

Polysaccharide from Porphyra is a kind of important biological active substance. Therefore，it is significant to effectively develop and utilize the polysaccharide from porphyra and improve the economic and social benefits of porphyra. In this paper, polysaccharide was extracted by the method of hot water immersed extraction and ethanol precipitation. Extraction process of water-soluble polysaccharides from Porphyra was optimized by response surface methodology. The content of polysaccharide was determined by sulfuric acid to phenol method. The results show that the extraction time is 4.4 h, extraction temperature is 88°Cand the ratio of material to liquid is1:42(g/mL). Polysaccharide is precipitated with 5 folds volume of ethanol for 6 h. The proportion of the extraction of the porphyra polysaccharide under this industrial process conditions is 10.012%.

Optimization of aqueous extraction of orevactaene and flavanoid pigments produced by Epicoccum nigrum

2019 ◽  
Vol 48 (4) ◽  
pp. 301-308 ◽  
Author(s):  
Sawinder Kaur ◽  
Paramjit S. Panesar ◽  
Sushma Gurumayum ◽  
Prasad Rasane ◽  
Vikas Kumar
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Maximum Yield ◽  
Polynomial Equation ◽  
Extraction Process ◽  
Aqueous Extraction ◽  
Extraction Temperature ◽  
Content Type ◽  
Epicoccum Nigrum ◽  
Broken Rice

Purpose The extraction of bioactive compounds such as pigments from natural sources, using different solvents, is a vital downstream process. The present study aims to investigate the effect of different variables, namely, extraction temperature, mass of fermented rice and time on the extraction process of orevactaene and flavanoid pigment from Epicoccum nigrum fermented broken rice. Design/methodology/approach Central composite rotatable design under response surface methodology was used for deducing optimized conditions. The pigments were extracted under conditions of extraction temperature (40-70°C), mass of fermented rice (0.5-1.5 g) and time (30-90 min), using water as the extraction media. The experimental data obtained were studied by analysis of variance. Data were fitted to a second-order polynomial equation using multiple regression analysis. Findings The optimum conditions generated by the software for aqueous extraction process, i.e. extraction temperature of 55.7°C, 0.79 g of fermented matter and extraction time of 56.6 min, resulted in a pigment yield of 52.7AU/g orevactaene and 77.2 AU/g flavanoid. Research limitations/implications The developed polynomial empirical model for the optimal recovery of the orevactaene and flavanoid pigments could be used for further studies in prediction of yield under specified variable conditions. Practical implications The response surface methodology helped in optimizng the conditions for the eco-friendly low-cost aqueous extarction process for orevactaene and flavanoid pigments, produced by Epicoccum nigrum during solid state fermentation of broken rice. This optimization can provide the basis for scaling up for industrial extraction process. Originality/value This paper focuses on optimizing the extraction conditions to get the maximum yield of orevactaene and flavanoid pigments, using water as the extracting media. No literature is available on the optimization of the extraction process of Epicoccum nigrum pigments, to the best of the authors’ knowledge.

scholarly journals Effects of Time, Temperature, and Solvent Ratio on the Extraction of Non-Extractable Polyphenols with Anticancer Activity of Barhi Date Palm Kernels Extracts Using Response Surface Methodology

2019 ◽  
Author(s):  
Israa Mahmud ◽  
Mohamed E. S. Mirghani ◽  
Faridah Yusof ◽  
Ma'an Al-khatib
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Date Palm ◽  
Antioxidant Activities ◽  
Radical Scavenging ◽  
Solvent Ratio ◽  
Extraction Temperature ◽  
Dietary Polyphenols ◽  
Experimental Values

Dietary polyphenols exist in two forms; extractable polyphenols (EPP) or compounds solubilised by aqueous/organic solvents, and non-extractable polyphenols (NEPP) or compounds remain in the corresponding residues after the extraction. At present, most researchers focus on EEP fractions, while NEPP is neglected. Thus, this study aimed to release NEPP from the remaining powder residue of Barhi date palm kernels (BDPK) with acid hydrolysis. The related extraction conditions were determined and optimised using response surface methodology (RSM) for maximisation of NEPP with highest cytotoxic and antioxidant activities. The face-centred central composite design (FCCCD) was used to establish treatments based on three independent variables, namely; extraction temperature, time, and solvent/sample ratio. Under the optimal conditions, the experimental values for DPPH radical-scavenging capacity of NEPP (IC50=57.52µg/mL), and cytotoxicity of NEPP against A549 and HT29 cells were IC50=17.4 µg/mL and 31.4µg/mL, respectively. The experimental values were in agreement with those predicted by RSM models, confirming the suitability of the model employed and the success of RSM for optimisation of the extraction conditions for NEPP from BDPK. These results indicate that NEPP from industrial date fruit waste could be a promising candidate as natural antioxidants with significant antiproliferation effect against A549 and HT29 cancer cells in-vitro.

Optimization of Extraction Process of Lycopene from Watermelon (Citrullus lanatus) by Response Surface Methodology

2011 ◽  
Vol 140 ◽  
pp. 385-393 ◽  
Author(s):  
Xian Feng Shi ◽  
Yuan Xu ◽  
Yu Hua Li ◽  
Hong Xia Zeng ◽  
Yu Hong Sun
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Citrullus Lanatus ◽  
Extraction Process ◽  
Quadratic Equation ◽  
Raw Material ◽  
Extraction Time ◽  
Solvent Ratio ◽  
Extraction Temperature ◽  
Extraction Solvent

The extraction processing of lycopene from watermelon was investigated in this paper. Based on single factor experiments, response surface methodology (RSM) was adopted to study the key parameters such as number of extraction, extraction temperature, extraction time in order to increase extraction rate of lycopene. A second order quadratic equation was established and the applicability of model and interaction involved factors on predicting the lycopene extracting content was verified. The results indicated that the optimum extraction conditions were hexane (containing 2% dichloromethane) as extraction solvent, ratio of solvent to raw material of 3:1 (mL/g), number of extraction of 2, extraction time of 1.9 h and extraction temperature of 29.8°C. Under these conditions the extracting content of lycopene was 14.71±0.22 mg/kg, which is well in agreement with value predicted by the model.

scholarly journals Optimization of Baicalin, Wogonoside, and Chlorogenic Acid Water Extraction Process from the Roots of Scutellariae Radix and Lonicerae japonicae Flos Using Response Surface Methodology (RSM)

Processes ◽  
2019 ◽  
Vol 7 (11) ◽  
pp. 854
Author(s):  
Jichang Li ◽  
Rui Wang ◽  
Zunlai Sheng ◽  
Zhiyong Wu ◽  
Chunli Chen ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Chlorogenic Acid ◽  
Response Surface ◽  
Extraction Process ◽  
Extraction Time ◽  
Extraction Temperature ◽  
Single Factor ◽  
Solid Ratio ◽  
Scutellariae Radix ◽  
Optimized Conditions

In this study, a simultaneous water extraction process for baicalin, wogonoside, and chlorogenic acid has been optimized. The effect of extraction temperature, extraction time, and liquid–solid ratio was scrutinized by single factor experiments and further analyzed by Box–Behnken design (BBD) approach using response surface methodology (RSM). The extraction yield of investigated compounds was determined by high performance liquid chromatography (HPLC). Single-factor experiments and response surface analysis results revealed that the optimized conditions are: Liquid to solid ratio 25:1 (mL/g), extraction temperature 93 °C, extraction time 2.4 h, and the extraction cycle two. Importantly, it has been noted that under the above conditions, concentrations of baicalin, wogonoside, and chlorogenic were 0.078, 0.031, and 0.013 mg/mL, respectively, and the overall desirability (OD) value was 0.76 which was higher than the non-optimized conditions and the deviation from the predicted OD value was only 2.44%. Conclusively, it has been suggested that the model was stable and feasible, and fit for extraction of baicalin, wogonoside, and chlorogenic acid from Scutellariae Radix and Lonicerae (L.) japonicae Flos.

Optimization of Extraction Process for Carotenoids from Tamarillo Fruits by Response Surface Methodology

2013 ◽  
Vol 781-784 ◽  
pp. 1749-1754 ◽  
Author(s):  
Qing Song Yang ◽  
Yan Zhao
Keyword(s):  
Response Surface Methodology ◽  
Theoretical Prediction ◽  
Response Surface ◽  
Extraction Process ◽  
Extraction Time ◽  
Extraction Temperature ◽  
Health Food ◽  
Liquid Ratio ◽  
Solid Liquid

Using Box-Behnken center composite design of three variables with three levels, the optimal extraction process for carotenoids from tamarillo fruits were determined by response surface methodology. The optimal extraction process was obtained as followed: solid-liquid ratio of 1:19.02(g/mL), extraction temperature of 44°C, and extraction time of 33.68 min. Under these conditions, the extraction of carotenoids content was 5.755[mg/100, similar to the theoretical prediction of 5.885[mg/100. This study confirms the efficiency of RSM as a simple and effective method and the great potential of tamarillo fruits as a health food and a resource of carotenoids.

scholarly journals Optimization of Reflux Conditions for Total Flavonoid and Total Phenolic Extraction and Enhanced Antioxidant Capacity in Pandan (Pandanus amaryllifoliusRoxb.) Using Response Surface Methodology

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Ali Ghasemzadeh ◽  
Hawa Z. E. Jaafar
Keyword(s):  
Response Surface Methodology ◽  
Antioxidant Capacity ◽  
Response Surface ◽  
Total Phenolic ◽  
Extraction Temperature ◽  
Solid Ratio ◽  
Central Composite Experimental Design ◽  
Operation Parameters ◽  
Predicted Values ◽  
Experimental Values

Response surface methodology was applied to optimization of the conditions for reflux extraction of Pandan (Pandanus amaryllifoliusRoxb.) in order to achieve a high content of total flavonoids (TF), total phenolics (TP), and high antioxidant capacity (AC) in the extracts. Central composite experimental design with three factors and three levels was employed to consider the effects of the operation parameters, including the methanol concentration (MC, 40%–80%), extraction temperature (ET, 40–70°C), and liquid-to-solid ratio (LS ratio, 20–40 mL/g) on the properties of the extracts. Response surface plots showed that increasing these operation parameters induced the responses significantly. The TF content and AC could be maximized when the extraction conditions (MC, ET, and LS ratio) were 78.8%, 69.5°C, and 32.4 mL/g, respectively, whereas the TP content was optimal when these variables were 75.1%, 70°C, and 31.8 mL/g, respectively. Under these optimum conditions, the experimental TF and TP content and AC were 1.78, 6.601 mg/g DW, and 87.38%, respectively. The optimized model was validated by a comparison of the predicted and experimental values. The experimental values were found to be in agreement with the predicted values, indicating the suitability of the model for optimizing the conditions for the reflux extraction of Pandan.

Optimization of Extraction Process by Response Surface Methodology of Polysaccharides from Acanthopanax obouatus Hoo

2012 ◽  
Vol 512-515 ◽  
pp. 2386-2389
Author(s):  
Xiao Rong Li ◽  
Peng Zhao
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Extraction Process ◽  
Raw Material ◽  
Extraction Time ◽  
Extraction Temperature ◽  
Predicted Values

Polysaccharide from Acanthopanax obouatus Hoo(AHPs) was extracted with the hot water.Box-Behnken design(BBD) was employed to optimize extraction temperature; extraction time and ratio of water to raw material to obtain a high AHPs yield. The yield of polysaccharide was 4.68% based on the above mentioned conditions.Close agreement between experimetal and predicted values was found.

scholarly journals Determination of optimal parameters of basil supercritical fluid extraction by response surface methodology

2016 ◽  
pp. 193-203
Author(s):  
Snezana Filip ◽  
Senka Vidovic ◽  
Branimir Pavlic ◽  
Zoran Zekovic
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Supercritical Fluid Extraction ◽  
Supercritical Fluid ◽  
Interactive Effect ◽  
Extraction Process ◽  
Extraction Yield ◽  
Fluid Extraction ◽  
Experimental Values

The supercritical fluid extraction of aroma compounds from basil (Ocimum basilicum L.) was studied. Response surface methodology was used to optimize the parameters of the process. Full factorial design was applied to evaluate the effects of two independent variables (pressure and temperature) on the extraction yield and linalool yield. From the response surface plots, pressure and temperature exhibited independent and interactive effect on the extraction yield. The optimal conditions to obtain the highest extraction yield (1.91%) of O. basilicum were the pressure of 29.7 MPa and temperature of 59.2oC, whereas the highest yield of linalool (1.998 g?kg-1) was obtained at the pressure of 20 MPa and temperature of 40oC. The experimental values agreed with the predicted ones, indicating suitability of the response surface methodology for optimizing the extraction process.

Optimization of Extraction Condition of Mycelium Polysaccharide from Tricholoma mongolium by Response Surface Methodology

2011 ◽  
Vol 361-363 ◽  
pp. 770-776
Author(s):  
Xiao Tong Wu ◽  
Qi Wei Ren ◽  
Jie Zhang ◽  
Ji Zhao ◽  
Su Ting Han ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Hot Water ◽  
The Other ◽  
Extraction Temperature ◽  
Single Factor ◽  
Extraction Condition ◽  
Hot Water Extraction ◽  
Solid Ratio ◽  
Optimum Extraction

In this paper, the hot water extraction conditions of mycelium polysaccharide ofTricholoma mongoliumwere investigated. By single-factor experiments, ethanol amount was determined at three times and the other factors (liquid–solid ratio, extraction temperature and time) were chosen to further optimize extraction conditions using response surface methodology (RSM). The Center Composite experimental results showed the optimum extraction conditions as follows: a temperature of 85.38°C, a liquid–solid ratio of 31.78 g/ mL and a extraction time of 2.18 h. Under these conditions, two extractions sufficiently reached the maximal the rate of mycelium polysaccharide 7.23%.

Sign in / Sign up

Export Citation Format

Share Document