scholarly journals Challenges when measuring the DC electric field very close to an insulator surface

2018 ◽  
Author(s):  
Birgitta Källstrand ◽  
Daniel Borg ◽  
Lars Walfridsson ◽  
Kenneth Johansson ◽  
Charles Doiron
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Spatial Resolution ◽  
Insulator Surface ◽  
Small Probe ◽  
Probe Size ◽  
Measurement Results ◽  
Excellent Spatial Resolution ◽  
Dc Electric Field ◽  
Dc Electric Fields

<p>A small probe that can measure DC electric fields in air has been developed. As a consequence of the probe size, it is possible to measure close to the surface of e.g. an HVDC insulator, and to resolve the field with an excellent spatial resolution. However, challenges have been identified when performing measurements close to a surface and its influence on the measurement results have been quantified. Measurement procedures have been developed to be able to correct for the possible net charging of the probe.</p>

Effects of AC/DC Electric Fields on Stretching DNA Molecules

NANO ◽  
2020 ◽  
Vol 15 (05) ◽  
pp. 2050065
Author(s):  
Ying Wang ◽  
Mingyan Gao ◽  
Yingmin Qu ◽  
Jun Hu ◽  
Ying Xie ◽  
...  
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Dna Molecules ◽  
Dna Interactions ◽  
Biophysical Properties ◽  
Voltage Range ◽  
Atomic Force ◽  
Ac Electric Field ◽  
Dc Electric Field ◽  
Dc Electric Fields

The effects of AC/DC electric fields on stretching DNA molecules were discussed in this work. In the experiments of stretching DNA molecules with AC/DC electric fields, the voltage range was changed from 0[Formula: see text]V to 10[Formula: see text]V, and the frequency of AC electric field was kept at 50[Formula: see text]kHz. An atomic force microscope (AFM) was used to obtain DNA distributions under different electric fields. DNA molecules were curved and randomly distributed in solution if there was not any force applied to them. When an AC electric field was applied to the DNA sample, the curvature of DNA molecules was decreased gradually, and the stretching result was more obvious with the increase of voltage from 0.1[Formula: see text]V to 5[Formula: see text]V. The DNA molecules were broken when the voltage was increased to 6[Formula: see text]V. However, under the DC electric field, the stretching result of DNA molecules reached to their optimum state when the voltage was 2[Formula: see text]V, and they kept their steady state even though larger electric field intensities applied to the electrodes. The results can be used for the study of DNA–DNA, protein–DNA and quantum dot–DNA interactions and for the exploration of DNA biophysical properties.

Pulsed DC electric fields couple to natural NAD(P)H oscillations in HT-1080 fibrosarcoma cells

2001 ◽  
Vol 114 (8) ◽  
pp. 1515-1520 ◽  
Author(s):  
A.J. Rosenspire ◽  
A.L. Kindzelskii ◽  
H.R. Petty
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Cell Function ◽  
Low Frequency ◽  
Reactive Oxygen Metabolites ◽  
Pulsed Dc ◽  
Fibrosarcoma Cells ◽  
Chemotactic Factors ◽  
Oxygen Metabolites ◽  
Dc Electric Fields

Previously, we have demonstrated that NAD(P)H levels in neutrophils and macrophages are oscillatory. We have also found that weak ultra low frequency AC or pulsed DC electric fields can resonate with, and increase the amplitude of, NAD(P)H oscillations in these cells. For these cells, increased NAD(P)H amplitudes directly signal changes in behavior in the absence of cytokines or chemotactic factors. Here, we have studied the effect of pulsed DC electric fields on HT-1080 fibrosarcoma cells. As in neutrophils and macrophages, NAD(P)H levels oscillate. We find that weak (~10(-)(5) V/m), but properly phased DC (pulsed) electric fields, resonate with NAD(P)H oscillations in polarized and migratory, but not spherical, HT-1080 cells. In this instance, electric field resonance signals an increase in HT-1080 pericellular proteolytic activity. Electric field resonance also triggers an immediate increase in the production of reactive oxygen metabolites. Under resonance conditions, we find evidence of DNA damage in HT-1080 cells in as little as 5 minutes. Thus the ability of external electric fields to effect cell function and physiology by acting on NAD(P)H oscillations is not restricted to cells of the hematopoietic lineage, but may be a universal property of many, if not all polarized and migratory eukaryotic cells.

scholarly journals Electric field induced gelation in aqueous nanoclay suspensions

Soft Matter ◽  
2018 ◽  
Vol 14 (34) ◽  
pp. 6974-6982 ◽  
Author(s):  
Paramesh Gadige ◽  
Ranjini Bandyopadhyay
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Soft Solids ◽  
Clay Suspensions ◽  
Dc Electric Fields

Liquid-like aqueous colloidal LAPONITE® clay suspensions rapidly transform into soft solids due to the application of DC electric fields.

Effects of DC electric fields on neuronal excitability: A bifurcation analysis

2014 ◽  
Vol 28 (18) ◽  
pp. 1450114 ◽  
Author(s):  
Yanqiu Che ◽  
Huiyan Li ◽  
Chunxiao Han ◽  
Xile Wei ◽  
Bin Deng ◽  
...  
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Parameter Space ◽  
Bifurcation Analysis ◽  
Neural Control ◽  
Neuronal Excitability ◽  
Modulation Method ◽  
Two Dimensional ◽  
Dimensional Parameter ◽  
Dc Electric Fields

In this paper, the effects of external DC electric fields on the neuro-computational properties are investigated in the context of Morris–Lecar (ML) model with bifurcation analysis. We obtain the detailed bifurcation diagram in two-dimensional parameter space of externally applied DC current and trans-membrane potential induced by external DC electric field. The bifurcation sets partition the two-dimensional parameter space in terms of the qualitatively different behaviors of the ML model. Thus the neuron's information encodes the stimulus information, and vice versa, which is significant in neural control. Furthermore, we identify the electric field as a key parameter to control the transitions among four different excitability and spiking properties, which facilitates the design of electric fields based neuronal modulation method.

Deformation of Nitrogen Bubbles in DC Electric Fields

2006 ◽  
Author(s):  
Feng Chen ◽  
Yao Peng ◽  
Yaozu Song ◽  
Min Chen
Keyword(s):  
Aspect Ratio ◽  
Electric Field ◽  
Electric Fields ◽  
Transformer Oil ◽  
Working Fluid ◽  
Direction Parallel ◽  
Electric Field Magnitude ◽  
Field Magnitude ◽  
Nitrogen Bubbles ◽  
Dc Electric Fields

The deformation of nitrogen bubbles in transformer oil with various DC electric fields was studied experimentally and theoretically. The bubble deformation was visualized by a high-speed digital camera. The major axis of the bubble was elongated along the direction parallel to the applied electric field, with the elongation increasing as the electric field magnitude increased. The electrical Weber number (We) was used to correlate the electric field magnitude and the electric permittivity of the working fluid to the bubble aspect ratio (AR). The experimental results indicate that the bubble aspect ratio increases with increasing We. The total electrical stresses were calculated on an actual bubble shape including the electrostriction stresses.

scholarly journals Meteor plasma trails: effects of external electric field

2009 ◽  
Vol 27 (1) ◽  
pp. 279-296 ◽  
Author(s):  
Y. S. Dimant ◽  
M. M. Oppenheim ◽  
G. M. Milikh
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Electrostatic Interaction ◽  
Geomagnetic Field ◽  
Dense Plasma ◽  
Dc Electric Field ◽  
E Region ◽  
Flow Through ◽  
Short Circuits ◽  
Meteor Plasma

Abstract. Meteoroids traversing the E-region ionosphere leave behind extended columns of elevated ionization known as the meteor plasma trails. To accurately interpret radar signals from trails and use them for diagnostics, one needs to model plasma processes associated with their structure and evolution. This paper describes a 3-D quantitative theory of the electrostatic interaction between a dense plasma trail, the ionosphere, and a DC electric field driven by an external dynamo. A simplified water-bag model of the meteor plasma shows that the highly conducting trail efficiently short-circuits the ionosphere and creates a vast region of currents that flow through and around the trail. We predict that the trail can induce electric fields reaching a few V/m, both perpendicular and parallel to the geomagnetic field. The former may drive plasma instabilities, while the latter may lead to strong heating of ionospheric electrons. We discuss physical and observational implications of these processes.

Effect of Microstructure on Lifetime Performance of Barium Titanate Ceramics Under DC and AC Electric Fields

2010 ◽  
Author(s):  
Jay Shieh
Keyword(s):  
Fatigue Strength ◽  
Barium Titanate ◽  
Electric Field ◽  
Electric Fields ◽  
Time To Failure ◽  
Electrical Loading ◽  
Ac Electric Fields ◽  
Lifetime Performance ◽  
Weibull Statistical Analysis ◽  
Dc Electric Field

Bulk barium titanate (BaTiO3 ) ceramic specimens with bimodal microstructures are prepared and their dielectric and fatigue strengths are investigated under an alternating current (AC) electric field and a direct current (DC) electric field. It is found that under AC electrical loading, both the dielectric and fatigue strengths decrease with increasing amount of coarse abnormal grains. The scatter of the AC fatigue strength is characterized with the Weibull statistics. The extent of scatter of the AC fatigue strength data correlates strongly with the size distribution of the coarse grains. Such correlation is resulted from the presence of intrinsic defects within the microstructure. For DC electrical loading, the time to failure of the specimens with coarse abnormal grains is significantly shorter than the lifetimes of the specimens with only small normal grains. It is found that under a DC electric field of 6 MVm−1, the BaTiO3 specimens would fail within 200 h when abnormal grains are present in the microstructure. However, the lifetimes of the specimens containing abnormal grains vary significantly from one to another. The Weibull statistical analysis indicates that the amount of abnormal grains has little influence on the lifetime performance of bulk BaTiO3 ceramics under large DC electric fields. In most of the failed BaTiO3 specimens under DC electrical loading, regardless of their lifetimes, large through-thickness round holes with recrystallization features are present. A mixed failure mode consisting of avalanche and thermal breakdowns is proposed for the failed specimens.

The Effect of Growth, Migration and Bacterial Cellulose Synthesis of Gluconacetobacter xylinus in Presence of Direct Current Electric Field Condition

2012 ◽  
Vol 550-553 ◽  
pp. 1108-1113 ◽  
Author(s):  
Lin Yan ◽  
Shi Ru Jia ◽  
Xin Tong Zheng ◽  
Cheng Zhong ◽  
Miao Liu ◽  
...  
Keyword(s):  
Electric Field ◽  
Bacterial Cellulose ◽  
Electric Fields ◽  
Direct Current ◽  
Cellulose Fiber ◽  
Sem Analysis ◽  
Cellulose Synthesis ◽  
Gluconacetobacter Xylinus ◽  
Growth State ◽  
Dc Electric Field

In this study, the movement and orientation of bacteria cells were controlled by direct current(DC) electric fields, result in altering alignment of bacterial cellulose nanofiber and further changing the 3-dimensional network structure of bacterial cellulose. A modified swarm plate assay was performed to investigate the migration of Gluconacetobacter xylinus cells which exposed in DC electric field. It suggested that the cells moved toward to negative pole and with the increasement of the electric field strength the velocity will also increase. The SEM analysis demonstrated that the cellulose fiber bundles which synthesized at 1V/cm have lager diameter and a trend toward one direction. Meanwhile the growth state of G.xylinus in the presence of DC electric field was also being observed.

Sign in / Sign up

Export Citation Format

Share Document